Supply Of Borosilicate System To Ntpl Fgd , Design And Supply Of Borosilicate Glass Block Lining System, Expert Supervision For Installation Works Of Lining Works In Chimney/ Duct And Wet Stack Flow Model Study , Design & Supply Of Closed Cell Borosilicat, chennai-Tamil Nadu

Supply Of Borosilicate System To Ntpl Fgd , Design And Supply Of Borosilicate Glass Block Lining System, Expert Supervision For Installation Works Of Lining Works In Chimney/ Duct And Wet Stack Flow Model Study , Design & Supply Of Closed Cell Borosilicate Glass Block Lining System, With Minimum 51 Mm Thick Borosilicate Glass Block, Adhesive Membrane Having A Minimum Thickness Of 3.2 Mm And Suitable Primer, All Conforming To Physical And Chemical Properties Mentioned In Specification, Testing, Ten Years Full Replacement Guarantee, Getting Approval Of Design/Drawings And Installation Procedure From Bhel/Customer Etc. All Complete As Per Specification, Drawings And As Directed By The Engineer-In-Charge Including Cost Of All The Materials For The Borosilicate Glass Block Lining System. Supply Of Mixing Machines, Special Tools/ Tackles And Any Other Special T&P Required For Handling, Storage, Installation And Test/ Maintenance Of Borosilicate Glass Block Lining System , Full-Time Onsite Qa Supervision By Borosilicate Glass Manufacturer Through Experts With Experience Of Atleast 5 Years In Technical Support During Surface Preparation, Application Of Primer, Mixing Of Two Components Adhesives Membrane By Automated Mixing Machines, Application Of Adhesive Membrane & Installation Of Borosilicate Glass Blocks, Etc. All Complete.Charges Etc Complete , Wet Stack Model Study - Conducting Condensate Collection Flow Model Study As Per Specification. The Study Shall Comprise Of The Following As Minimum: • Condensation Calculations & Design Of Condensate Collection System • A Scale Physical Flow Model (Minimum 1:12 Scale) For Liquid Collector System (Lcs) Design. • A Computational Flow Model For Plume Downwash Analysis. • A Physical Or Computational Flow Model For Cems Elevation Flow Performance. • Design Of Optimum Choke Geometry, If Required. • Review & Approval Of Liquid Collector System Construction Drawings. The Scope Of Study Shall Be From Mist Eliminator Outlet To Top Of The Stack. Vendor Shall Ensure The Completeness In All Respects And For Efficient & Trouble Free Operation Of Chimney And Liquid Collection System For Project. Vendor Shall Also Include Site Inspection & Supervision For 7 Days To Verify And Evaluate Lcs System Performance Prior To Commissioning By The Agency Carrying Out The Study. The Following Codes And Standard Shall Be Followed For The Conductance Of This Study: • Revised Wet Stack Design Guidelines, 2012 By Epri • Aci 307 (American Concrete Institute Code Requirement For Rc Chimney) • Epri Report Cs-2520 Entrainment In Wet Stack 1982 • Epri Report Tr-109380 Guidelines For Fluid Dynamic Design Of Power Plant Ducts, 1998 • Epri Report Gs-6984 Fgd Mist Eliminator System Design And Specification Guide • Cicind, Icac, Us Epa And Other International And Other Latest Codes And Standards.

Refer document

Refer document

Refer document