Supply of Digital insulation tester-Range: 0-2000M ohms Testing Voltage DC: 1000V Resolation: 1 M ohms,., port blair-Andaman And Nicobar Islands

Supply of Digital insulation tester-Range: 0-2000M ohms Testing Voltage DC: 1000V Resolation: 1 M ohms,Digital Wattmeter-Range: 0-1999W with floating decimal point, max current 5 Amps Accuarcy:+ 0.5 %+ least count Display: 4 digits, 7 segments, bright LED Power Requirement: 180 to 270 volts AC 50 Hzs,Digital Dual Display clamp Meter-DC Voltage : 200mV to 1000 V Ac Voltage: 200mV to 750V DC Current: 100A to 1000A Ac Current: 40A to 1000A Frequency: 10Hz to 10 MHz Dual Display Make: Fluke, Meco, etc.Digital Cable & Fault Locator-Suitable for finding fault location and type of faults for LT & HT upto 11 KV under ground cables Frequency range: 0 to 50 Hz Display: LCD Power Supply: Battery operated & power consumption should be less,Digital Anemometer-Fast, accurate readings with digital readability and convenience of a remote sensor separately 1) Multi functions for air flow mesaurement: m/s, km/h2) Built in low battery indicator 3) Wide applications: Use this anemometer to check air conditioning & heating system,measure air velocities, wind speeds, temeprature.. etc 4) Operating temperature: 0 to 50 degree celcius,Air Conditioning Clamp-on Power and Harmonics Tester-Conductor size: 55 mm appox. , 64 X 24 mm bus bar internal power battery operated Display: 4+4 digits LCD Auto Power off,Digital Air Conditioning current Leakage Tester-1)High precision Air Conditioning ma measurement, it is usefull forAC mA leakegaecurrent mesaurement 2) Measure AC mA on the inductive conductor 3) Miniature type, easy to carry out & operation 4) LCD display allows readout -out event at high amvient light level.5) Overload protection cirucit is provided for all range. 6) Design to meet IEC 1010 safety requirement 7) Display: LCD 8) Measurement & Resolution: 200 AC x 0.1 mA, 20 ACA x 0.01 A, 200 ACA x 0.1 A 9) Overload Circuit protection: 300 ACA max. With 1 minute for 20 A , 200A range 10) Operating Humidity Less than 80% RH,Clam-on CT & Flexible current Probe-Input range: 0-100A AC output range: 0-1A AC jaw opening: 15mmVery low frequency upto 100khz handy to pass through cables or bunches of conductor wires range 300 a AC output 100 mv/ 1ka accuracy+/- 1% probe length 600 mm output terminal

Refer document

INR 5000.0 /-

Refer document