Tender For Addn Or Altn To Building No P 137 At Af Stn Mount Abu - S&F Solid Pvc Wall Lining Consisting Of 5Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing All As Directed By Engr-In-Charge. 2 S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing. 3 Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings 4 M&L For Galvanised Corrugated Mild Steel Sheeting Of Thickness 0.63 Mm With Two Corrugations Side Lap, Fixed With Coach Screws And Washers In Roofs Walls Etc With Grade Of Zinc Coating 275 Fixed With L Type Or J Type Or Cranked Hook Bolts In Lieu Of Screws 5 M&L For Plain Galvanised Mild Steel Sheeting Of Thickness 0.63 Mm As In Ridges , Valley Gutterswith Grade Of Zinc Coating 275 6 S&F Joist Channel Angle, Tee Section, Ms Pipe, Ms Square Tube , Steel Trusses As Required , Ms Plate Fixed In Purlin Rafter Cleat, Support And Including Cutting Of Grooves In Stone Masonry And Ms Frame Work Fixed Into The Walls Etc Incl Welding, Riveting, J-Hook Etc Conf To Fe-290 Gde E-165 All As Directed By Engr-In-Charge 7 M&L Preparation Of New Steel Surfaces Over 10 Cm In Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Over One Coat Of Red Oxide. 8 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store And Rubbish Off The Premises 9 M&L For 600Mmx600mmx10 Mm Thick Vetrified Light Shade Ceramic Tiles Shade As Approved Flooring ( In Any Pattern ) Andjointed With Neat Cement Slurry Over 15 Mm Thickcement Screed In Cm 1:6 And Pointed With Coloured Cement Matching With Surfaces Of Tiles As In Floor Complete All As Specified And Directed. 10 Excavation In Trenches In Hard Rocks Not Exc 1.5M In Width And Not Exc 1.5 In Depth For Foundation And Getting Out. 11 M&L Cement Concrete Type D21:4:8 ( 40 Mm Graded Aggregate ) As In Foundation, Filling And Mass Concrete. 12 M&L Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius, Built In Cement Mortar 1:6 Complete All As Specified And Directed. 13 M&L For 15 Mm Thick Rendering On Fair Faces Of Brickwork Or Concrete Surfaces In Cm 1:4 Surface Finished Even And Smooth Without Using Extra Cement With Water Proofing Compound Complete All As Specified And Directed.. 14 M&L For Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm 15 Removing Excavated Materialsto A Distance Not Exceeding 50 Mtr And Depositing Where Directed At A Level Not Exceeding 1.5 Mtr Above The Starting Point Rocks 16 Taking Down Chowkhats Or Frames With Shutter ( Without Taking Off Shutter From The Frame ) Exc 1.50 & N.Exc. 4 Sqm In Each Complete All As Specified & Directed. 17 S&F Solid Pvc Double Door Frame Of Size Solid Pvc Double Door Frame Of Size 50Mm X 95Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Tube, Suppling & Fixing In Opening As Per Specified And Directed. 18 S&F Factory Made Solid Pvc Moulded Door Shutter With Particle Board Core, 28 To 30Mm Thick ( Stiles ) , With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specified And Directed. 19 S&F Aluminium Alloy Anodised Sliding Door Bolt With Hasp & Staple ( Bolt Type ) And Fixing Clipes Of Sheet, Cast Or Extruded Sections And Fixing Bolts Of Extruded Sections Or Cast Aluminium Alloy, Length Of Bolt Of 300 Mm. 20 S&F 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section 21 S&F 150 Mm Size, Aluminium Handles, Cast Type, Anodised. 22 S & F 100 Mm Size Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised. 23 M&L For Preparing Of Old Surfaces Of Any Description And Applyingtwo Coats Of Plastic Emulsion Exterior Paint Inover A Coat Of Primer Complete All As Specified & Directerd. 24 Cleaning Of Roof Slab / Chajja With Sweeping With Brooms, Removing All Depositions / Mud / Vegetations Etc Complete All As Specified And Directed By Engineer-In-Charge. 25 M&L For Preparing New Surfaces Of Roof And Applying Two Coat Of Dr. Fixit Roof Seal Top Coat ( Classic ) Or Equivalent And A Coat Of Dr. Fixit Roof Seal Top Coat ( Diluted With Water In The Ratio 2:1 ) As Self-Priming Seal Acrylic Coating As Per Manufacturer’S Instruction To Stop Leakage / Seepage From Roof ( Gi Sheet ) / Wall Butbefore Primer, All The Bolt Joints Are To Be Filled With Dr. Fixit Feviseal Hy 100Or Equivalentand The Leakage Is To Be Sealed ( Rate Include In This Item ) Complete All As Specified And Directed By Engineer-In-Charge.Note:-1. Two Coat Of Roof Seal Top Coat ( Classic ) @ 2.0-2.2 Sqm / Ltr / Coat, Without Water Dilution At Rate Of Application Being The Same For Both Coats. This Would Ensure Correct Consumption Of Material To Deliver A Total 450-500 Micron Thickness And A Coat Of Self Priming @ 9-10 Sqm / Ltr.2. Quoted Rate Shall Be Deemed To Be Included For Work In Buildings / Structure Of Any Height. 26 M&L 75 Mm Thickpcc1:4:8Typed-2 ( Using 40Mm Grade Stone Aggregate ) Asinsub Floors, Sub Bases , Flooring Etc 27 M&L Chequered Pvc Moulded Cement Concrete Tilesdark Shade 30 Cm X 30 Cm X 22 Mm Thick Set , Jointed And Pointed In Neat Cement Slurryin Floorswith Gray Cement And Pigment With Screed Bed 15 Mm Cm 1:6 Complete All As Specified By Engr- In- Charge 28 Taking Down Copper / Aluminium Point Wiring ( Light, Fan, Socket Or Power ) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc. Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit ( Credit For Above Items Should Be Made As Per Conditions Separately ) And Making Good Disturbed Surfaces Of Walls, Floors, Etc Complete All As Specified And Directed By Engineer-In-Charge. 29 Point Wiring Complete Concealed Type Incl Cutting Chases In Stone Wall For Conduits And Sinkings For Boxes And Making Good To Walls, Floors Etc With 1.5 Sqmm Single Core Multi Standard Copper Conductor Pvc ( Frlsh ) Insulated Sheathed Cable In And Incl Pvc Conduit Heavy Duty ( Wall Fitness Not Less Than 1.8 Mm ) With Accessories Existing Pressed Steel Terminal Boxes ( Sunk In Wall ) Including New 3.00 Mm Thick Plastic Laminated Sheet Top Cover With 1.50 Sqmm Pvc Insulated Unsheathed Copper Conductor Frls For Common Earth And Connecting To Earth Dolly For:- ( A ) One Light Point / Exhaust Fan / Ceiling Controlled By One Switch One Way & Ceiling Fan With One Way Switch & Regulator. 30 ( B ) One Socket Out Let 5 Amps 5 Pin On Same Board With Other Switch Complete All As Specified And Directed By Engineer-In-Charge. 31 ( C ) One Switch Socket Combined5 Amps 5 Pin On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 32 All As Per Item No 5 Here In Before But With Frlsh Multistranded Cable Of Size 4 Sqmm And Multistanded Insulated Copper Earth Continuity Conductor Of Size 4 Sq Mm Complete All As Specified And Directed By Engineer-In-Charge. For:- ( A ) One Switchsocket Combination Outlet 16 Amp Power Point On Independent Board. 33 S&Fceiling Rose Surface Bakelite 65 X 50 Mm Three Terminals Complete All As Specified And Directed By Engineer-In-Charge. 34 S&Fmodular Switch 6 Amp 250 V Ac One Way One Module Complete All As Specified And Directed By Engineer-In-Charge. 35 S&F Modular Switch Socket Combined, 6A - 2 / 3 Pin Combined 2 Module Complete All As Specified And Directed By Engineer-In-Charge. 36 S&F Modular Switch Socket 6A / 16A - 2 / 3 Pin Combined 2 Module Complete All As Specified And Directed By Engineer-In-Charge. 37 S&F Aesthetically Designed Ledpanel For Surface Mounting Which Provides Soft-Light And Glare Free Symmetrical Illumination 34 Watt, Of Size 2 X 2 Led Light Fitting, Including Twin Core Flexible Copper Cable For Connection Of The Lights And Connectors Where Required Complete All As Specified And Directed By Engineer-In-Charge.Make - Havells Cat Part No:Plano2x2plr34wled865s 38 M&L For Dismantling Of Ac Of Capacity 1.5 / 2.0 Ton Split Typecomplete All As Specified And Directed By Engineer-In-Charge. 39 M&L For Fixing Of Ac 1.5 / 2.0 Ton Split Type With All Connection In The Original Conditioncomplete All As Specified And Directed By Engineer-In-Charge.
