|
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed. |
| 2 | Demolition of cement Concrete (unreinforcementin ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L Brickwork with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 4 | M&L Brickwork with sub-class \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 5 | M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and rough to receive the flooring etc without using extra cement complete all as specified and directed. |
| 6 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 7 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 8 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 9 | Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 10 | Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 11 | Refixing old steel tubing 25mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 12 | S&F 15mm bore Tubes,\"Medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 13 | S&F 20mm bore Tubes,\"Medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 14 | S&F 25mm bore Tubes,\"Medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 15 | Dismantling water tanks and removing to store Exc 250 & n exc 500 complete all as specified and directed. |
| 16 | Dismantling water tanks and removing to store Exc 500 & n exc 1000 complete all as specified and directed. |
| 17 | Dismantling water tanks and removing to store Exc 1000 & n exc 2000 complete all as specified and directed. |
| 18 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) 500 ltr capacity complete all as specified and directed. |
| 19 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) 1000 ltr capacity complete all as specified and directed. |
| 20 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) 2000 ltr capacity complete all as specified and directed. |
| 21 | S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 22 | S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 23 | S&F Rotational moulded polyethylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 24 | S&F in repair PVC water storage tank cover for 500/1000 ltr capacity with pvc nut and bolt and fixing arrangement complete all as specified and directed. |
| 25 | S&F in repair 15mm dia Bib taps CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 26 | S&F in repair 15mm dia Pillar laps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered \"Hot1 or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 28 | S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 29 | S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 30 | S&F in repair 15mm dia angle Stop cock, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed one end for iron pipe and other end for PVC connection pipe complete all as specified and directed. |
| 31 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 32 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 33 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 34 | S&F in repair 15mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 35 | S&F in repair 20mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 36 | S&F in repair 25mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 37 | S&F in repair 32mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 38 | S&F in repair 40mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 39 | S&F in repair 15mm dia bib tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-105gms) complete all as specified and directed. |
| 40 | S&F in repair 15mm dia Pillar tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed. |
| 41 | S&F in repair 15mm dia stop cock standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed. |
| 42 | S&F in repair 15mm dia angle stop cock standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed. |
| 43 | S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals. (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 44 | S&F in repair 32 mm bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and directed. |
| 45 | Dismantling cast iron soil waste and vent pipes of dia 75mm including all fittings of any description and in any position complete all as specified and directed. |
| 46 | Dismantling cast iron soil waste and vent pipes of dia 100mm including all fittings of any description and in any position complete all as specified and directed. |
| 47 | S&F 75mm bore Cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 48 | S&F 100mm bore Cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 49 | S&F 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 50 | S&F 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 51 | S&F 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 52 | S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 53 | S&F in repair Stack clamps for 75mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 54 | S&F in repair Stack clamps for 100mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 55 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid intrenchesorin floors/wall complete all as specified and directed. |
| 56 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid intrenchesorin floors/wall complete all as specified and directed. |
| 57 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 58 | S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 59 | S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 60 | S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 61 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 62 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 63 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and flush pipe) complete all as specified and directed. |
| 64 | S&F in repair vitreous China squatting pan, \"Orissa\" pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and including flush pipe) complete all as specified and directed. |
| 65 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 66 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 67 | S&F in repair Vitreous Cliina wash basin, while, flat back, size 580x450mmexcluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 68 | S&F in repair 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 69 | S&F in repair Flush pipes to pedestal pan, including all joints complete all as specified and directed. |
| 70 | S&F in repair flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed. |
| 71 | S&F in repair 25mm dia Stainless steel tubular curtain rod incl fancy type brckets both side fixedcomplete all as specified and directed. |
| 72 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | S&F in repair single mirror bathroom cabinet moulded body and frame (made of strong and fine quality ABS) with hanged door (Size 16\"x12\") white in colour make as approved by GE fixed to wall with appropriate rowl plugs complete all as specified and directed. |
| 74 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 75 | S&F in repair jet spray ss complete set for EWC complete all as specified and directed. |
| 76 | S&F in repair plastic seat cover for pedestal pan WC incl chromium plated hinging divice complete all as specified and directed. |
| 77 | S&F in repair stainless steel bright finish round shape 100mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed. |
| 78 | Ditto but 125mm size with access hole for inserting waste pipe etc complete all as specified and directed. |
| 79 | S&F in repair shower rose brass chromium plated 125mm size complete all as specified and directed. |
| 80 | S&F in repair stainless steel bolts and nuts including necessary washers as in WHB brackets incl refixing WHB with white cement complete all as specified and directed. |
| 81 | S&F in repair health faucet of approved quality complete all as specified and directed. |
| 82 | S & F in repairs stainless steel plate rack of size not less than32\" x 32\"(Make- Pooja/Nirali/Kingston/Prayag) complete all as specified and directed. |
| 83 | Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 84 | Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 85 | S&F 16mm dia Brass Elbow complete all as specified and directed. |
| 86 | S&F 20mm dia Brass Elbow complete all as specified and directed. |
| 87 | S&F 20mm dia Brass Elbow (3/4 X ½) complete all as specified and directed. |
| 88 | S&F 16mm dia Brass Tee complete all as specified and directed. |
| 89 | S&F 20mm dia Brass Tee complete all as specified and directed. |
| 90 | S&F 16mm diaMale Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 91 | S&F 20mm diaMale Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 92 | S&F 16mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 93 | S&F 20mm dia Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 94 | PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 95 | PVC waste pipe 32mm size with PTMT nuts of length 600mm for wash hand basin/urinal/sink etc complete all as specified complete all as specified and directed. |
| 96 | M&L preparation of old decorated surfaces of wallby rubbing down with water cleaning the surfaces to the entire satisfaction of the Engineer-in-Chargeas and applying one coat of oil emulsion distemper and to be applied only by the authorised applicater of manufacturers (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed. |
| 97 | M&L for preparation of old plastered or unplastered surfaces of walls including cornices , pilasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy \spots and applying one coat of Cement Base Paint on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed. |
| 98 | M&L PCC in 1:4:8 type E2 (using 40mm graded agg) as in sunken floor of toilet complete all as specified and directed. |
| 99 | M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm including cleaning surfaces in sunken portion and laying APP polymer modified fiber glass reinforced membrane 3mm thick 3.5Kg/Sqm (modified bituminous water proofing membrane) with plain polythene finish and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction complete all as specified and directed. |
| 100 | Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish outside MD land complete all as specified and directed. |
| 101 | M&L non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 102 | S &F glazed ceramic coloured tiles in vertical surface 450 x300x7 mm thick white set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick rendering in cm 1 :4 as backing coat, even and fair to receive tiles etc complete all as specified and directed. |
| 103 | M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including pintle hinges, stops, hand made sliding bolts etcincl ornamental and intricate design con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 104 | M&L for preparation of new surfaces of steel or iron over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide zincl chrome primer complete all as specified and directed. |
| 105 | S&F mild steel 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. |
| 106 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 107 | S&F 200mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 108 | M&L Pre-cast cement concrete blockmasonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar in CM 1:6 complete all as specified and directed |
| 109 | M&L for 10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 without using extra cement complete all as specified and directed |
