Rate Contract Tender For Supplying Of Pipes, Motors And Specials For The Year 2022-23 , Supply Of Pvc Pipe - Od 32Mm And 10 Kg / Sqcm, Supply Of Pvc Pipe - Od 50Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 63Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 75Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 90Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 110Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 160Mm And 6 Kg / Sqcm, Supply Of Pvc Pipe - Od 200Mm And 6 Kg / Sqcm, Pvc Pipe - Od 250Mm And 6 Kg / Sqcm, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 50Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 63Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 75Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 90Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 110Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 160Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Couplers As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 200Mm Dia Pvc Couplers, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 50 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 63 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 75 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 90 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 110 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 160 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Elbows As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark And With Its Latest Amendments 200 Mm Dia Pvc Elbows, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 50 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 63 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 75 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 110 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 160 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 180 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Tee As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 200 Mm Dia Pvc Tee, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 50 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 63 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 75 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 110 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 160 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Bend As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 200 Mm Dia Pvc Bend, Supply And Delivery At Site Special Moulded Variety Pvc Service Saddles As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Service Saddles, Supply And Delivery At Site Special Moulded Variety Pvc Service Saddles As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 110 Mm Dia Pvc Service Saddles, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 50 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 63 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 75 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 90 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 110 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 160 Mm Dia Pvc Reducer, Supply And Delivery At Site Special Moulded Variety Pvc Reducer As Per Is 7834 / 1987 And Fabricated As Per Ig124 / 1984 With Isi Mark With Its Latest Amendments 200 Mm Dia Pvc Reducer, Providing, Supplying To Work Site, Single Phase Submersible Pump Sets Of 100Mm Dia ( 4 Inch ) Suitable For Bore Well Confirming To Is 8034-2000 Specifications, With Testing Of As Per Instructions Of Engineer Incharge Of Work And Latest Amendments. 2Hp / 1.5Kw16 Stg, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 3.00 Hp - 90 Lpm @ 66 M = 6 Stg Outlet Dia - 2.00”, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 4.00 Hp - 90 Lpm @ 88 M = 8 Stg Outlet Dia - 2.00”, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 5.00 Hp - 90 Lpm @ 110 M = 10 Stg Outlet Dia - 2.00”, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 6.50 Hp - 90 Lpm @ 132 M = 12 Stg Outlet Dia - 2.00”, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 7.50 Hp - 90 Lpm @ 165 M = 15 Stg Outlet Dia - 2.00”, Providing, Supplying To Work Site, Submersible Pump Set Of 150Mm Dia Suitable For Bore Well And Confirming To Is 8034-2000;3Phase, Ss Bowl & Impeller With Low Volt Motor As Per Specifications, As Per Necessary Ammendments And Instructions Of Engineer Incharge Of Work. 10.00 Hp - 90 Lpm @ 220 M = 20 Stg Outlet Dia - 2.00”, Supply And Delivery At Site Brand New Best Make Pvc Insulated Cable Of Flat 3 Core ( Sheathed ) Of Nominal Cross Sectional Area As Per Is 694-1990 With Isi Mark And As Per Its Latest Amendments. 1X3x1.5 M, Supply And Delivery At Site Brand New Best Make Pvc Insulated Cable Of Flat 3 Core ( Sheathed ) Of Nominal Cross Sectional Area As Per Is 694-1990 With Isi Mark And As Per Its Latest Amendments. 1X3x2.5 M, Supply And Delivery At Site Brand New Best Make Pvc Insulated Cable Of Flat 3 Core ( Sheathed ) Of Nominal Cross Sectional Area As Per Is 694-1990 With Isi Mark And As Per Its Latest Amendments. 1X3x4 M2, Supply And Delivery At Site Of Brand New Best Make Gate Valve As Per Is 778 / 1984 With Isi Mark And As Per Its Latest Amendments Size 50 Mm, Supply And Delivery At Site Of Brand New Best Make Non-Return Valve As Per Is 778 / 1984 With Isi Mark And As Per Its Latest Amendments Size 50 Mm, Supply And Fixing Of Single / Double Chamber Triple Function Tamper Proof ( Both The Orifces To Be Housed In The Single Chamber ) Air Valves With Body And Cover In Ductile Cast Iron Of Grade Ggg 40 / 50. All Internal Parts Such As Float, Shell With Appurtenances., All Cover Bolts Of Austenitic Alloy / Ss 304 Steel, Dn 50 Float Of Hostaflon / Ss 304 And Gaskers And Seals Of Epdm. Epoxy Powder Coating ( Ep-P ) Inside And Outside Colour Blue Ral5005. The Valves Should Be Designed For All The Three Functions I.E., 1. Large Orifice For Venting Of Large Air Volumes On Start Up. 2. Large Orifice For Intake Of Large Air Volumes. 3. Small Orifice For Discharge Of Pressurized Air During Operation For Tp Air Valves Of 80Mm Dia., Supplying And Fixing Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc, Supplying Of Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc For Suilce Valve Of Pn 16.0 And 80Mm, Supplying Of Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc For Suilce Valve Of Pn 16.0 And 100Mm, Supplying Of Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc For Suilce Valve Of Pn 16.0 And 200Mm, Supplying Of Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc For Suilce Valve Of Pn 16.0 And 250Mm, Supplying Of Di Resilient Seated Soft Sealing Sluice Valve Of Variouis Dia. With Body Bonnet Of Ductile Iron ( Di ) Conforming To Is1865 And Of Grade Ggg 40 / 50, Shaft Of Stainless Steel, Wedge Fully Rubber Lined With Edpm Seals Of Nbr And The Valves Should Be Vacum Tight And 100% Leak Proof With Face To Face Dimensions As Per Is 14846-2000 Only.The Stem Sealing Should Be With Toroidal Sealing Rings ( Minimum 2 “ O “ Rings ) . Body And Bonut Should Be Coated With Electrostatically Applied Epoxy Powder Coating With Minimum Coating Thickness Of 250 Micron Both Inside And Outside. The Rate Is Inclusive Of Cost Of Valves, T.P Set, B92 Galvanized Bolts & Nuts And Rubber Insertions Etc For Suilce Valve Of Pn 16.0 And 300Mm, Providing Wrought Mild Steel ( Galvanized ) Collarconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Collarconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Collarconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Collarconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Collarconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Elbow Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Bend Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Bendconfirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Tee Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Socket Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Socket Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Socket Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Socket Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Socket Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Plugs Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Plugs Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Plugs Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Plugs Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Plugs Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Union Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 15 Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 25Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 32Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 40Mm Dia, Providing Wrought Mild Steel ( Galvanized ) Gi Hexagonal Nipple Confirming To Is 1239-Ii, 1991 With Latest Amendments If Any 50 Mm Dia, Supply And Delivery At Site Gm ( Copper Alloy ) Gate Valves Confirming To Class-I As Per Is 778 With Latest Amendments, 1 No. Screwed In Bonnet Inside Screw, Rising Spring Spindle Integral Seat Screwed Females Ends Confirming To Is 554 / 1990 Body Hydraulically Tested 1.5Hp Seat Standard Tested 1 Hp With Is Mark.15 Mm Dia, Supply And Delivery At Site Gm ( Copper Alloy ) Gate Valves Confirming To Class-I As Per Is 778 With Latest Amendments, 1 No. Screwed In Bonnet Inside Screw, Rising Spring Spindle Integral Seat Screwed Females Ends Confirming To Is 554 / 1990 Body Hydraulically Tested 1.5Hp Seat Standard Tested 1 Hp With Is Mark, 25Mm Dia, Supply And Delivery At Site Gm ( Copper Alloy ) Gate Valves Confirming To Class-I As Per Is 778 With Latest Amendments, 1 No. Screwed In Bonnet Inside Screw, Rising Spring Spindle Integral Seat Screwed Females Ends Confirming To Is 554 / 1990 Body Hydraulically Tested 1.5Hp Seat Standard Tested 1 Hp With Is Mark, 32Mm Dia, Supply And Delivery At Site Gm ( Copper Alloy ) Gate Valves Confirming To Class-I As Per Is 778 With Latest Amendments, 1 No. Screwed In Bonnet Inside Screw, Rising Spring Spindle Integral Seat Screwed Females Ends Confirming To Is 554 / 1990 Body Hydraulically Tested 1.5Hp Seat Standard Tested 1 Hp With Is Mark, 40Mm Dia, Supply And Delivery At Site Gm ( Copper Alloy ) Gate Valves Confirming To Class-I As Per Is 778 With Latest Amendments, 1 No. Screwed In Bonnet Inside Screw, Rising Spring Spindle Integral Seat Screwed Females Ends Confirming To Is 554 / 1990 Body Hydraulically Tested 1.5Hp Seat Standard Tested 1 Hp With Is Mark, 50 Mm Dia, Providing, Laying And Fixing Gi Pipes Conforming To Is 1239:1990 With Latest Amendments Complete With Gi Fittings ( Excluding The Cost Of Fittings ) With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) For Medium Duty Gi Pipe Of 15Mm Dia, Providing, Laying And Fixing Gi Pipes Conforming To Is 1239:1990 With Latest Amendments Complete With Gi Fittings ( Excluding The Cost Of Fittings ) With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) For Medium Duty Gi Pipe Of 25Mm Dia, Providing, Laying And Fixing Gi Pipes Conforming To Is 1239:1990 With Latest Amendments Complete With Gi Fittings ( Excluding The Cost Of Fittings ) With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) For Medium Duty Gi Pipe Of 32Mm Dia, Providing, Laying And Fixing Gi Pipes Conforming To Is 1239:1990 With Latest Amendments Complete With Gi Fittings ( Excluding The Cost Of Fittings ) With Cuts And Threads Wherever Necessary, Including Testing For Water Tightness, With All Lead And Commissioning. ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) For Medium Duty Gi Pipe Of 40Mm Dia
