tender for Arc For Execution Of Civil Maintenance Work From Below Mention Items List For All Office Premises Under Bardoli Division earth work Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 190.00 CMT 2 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 90.39 CMT 3 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 336.34 CMT 4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. 215.54 CMT 5 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete. 535.90 CMT 6 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(ii) 250 mm 861.35 Each 7 Cutting, pulling out and removing thick jungle grass,shrubs, bushes and unwanted vegetations/pants from their roots and up-rooting from the area of Khadi i.e. natura drain channel or gutter filled-up with sewage water, earth,coal and storm water including removing of silted stuff of mud, sewage, earth etc. by digging or lifting out all materials by engaging hydraulic excavator of one Cu.M.bucket and dispose off all stuff and cut vegetations as directed by the Engr.-in-charge. Also making sewage & storm water flow in smooth flowing condition by preparing @ 3.0 mtr wide channel for the smooth water flow as per the instruction of the E.I.C. The rate includes all require dmachineries, tools & tackles, materials, labours, loading & unloading, transportation, equipments etc. complete at the risk and cost of the contractor. Payment will be made for the actual work done hours at site. 840.00 Hour 8 Tractor Trip (As per requirement and it may be increase or decrease) 1500.00 No 9 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work 698.25 CMT 10 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 363.30 CMT 11 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 31.82 SMT 12 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 31.82 SMT Name of work : ARC for Civil Maintenance work for Execution of misc. maintennace work for all S/Dn and Diviison premises of Bardoli Division. concrete brick work plaster Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing. 35.28 SMT 14 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 123.90 Each 15 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves,holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. 165.90 Each 16 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift. 267.75 Each 17 Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.) 32.55 SMT 18 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (More than 10 ton) 2406.80 CMT 19 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (More than 10 ton) 3071.20 CMT 20 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for R.C.C work in (iii) Slabs having more than 10 cm and upto 13 cm. thickness 5359.20 CMT 21 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) and finishing smooth with,curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M 5539.60 CMT 22 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- graded stone aggregates 20 mm nominal size) and finishing smooth with,curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C work in (B) COLUMNS: (ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 6634.10 CMT 23 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level 68.67 Kg 24 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A) Modular (More than 10 ton) 3033.80 CMT 25 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks (More than 10 ton) 3174.60 CMT 26 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1-Cement : 6 -fine sand)(A) Modular (More than 10 ton) 3208.70 CMT Concrete Work Brick Work 27 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1-Cement : 6 -fine sand)(C) Fly Ash Bricks (More than 10 ton) 3356.10 CMT 28 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (A) Modular (More than 10 ton) 401.50 SMT 29 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks (More than 10 ton) 449.90 SMT 30 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in superstructure above plinth level upto floor two level in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) (A) Modular (More than 10 ton) 433.62 SMT 31 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in superstructure above plinth level upto floor two level in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) (C) Fly Ash Bricks (More than 10 ton) 484.99 SMT 32 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) 85.16 SMT 33 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 113.40 SMT 34 Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 144.90 SMT 35 Extra over items 31 to 33 for finishing with a floating coat of neat cement slurry. (More than 10 ton) 31.82 SMT 36 Extra over items 31 to 33 for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls. 16.38 SMT 37 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 198.45 SMT 38 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 18.48 RMT 39 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (More than 10 ton) 669.90 SMT 40 Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (More than 10 ton) 689.85 SMT 41 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick (More than 10 ton) 1379.70 SMT Plaster Flooring Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick (More than 10 ton) 638.40 SMT 43 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (More than 10 ton) 719.25 SMT 44 Providing & Laying Grenite slab 18 mm thick in skirting, dedo, risers of steps and landing, sill laid on bed of 10 mm thick base of CM 1:4 finished with flush pointing in white or colour cement as directed by EIC 3261 SMT 45 Labour Charges half round edge for Granite 85 RMT 46 P & L 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. (More than 10 ton) 925.05 SMT 47 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. 327.17 RMT 48 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. 733.18 SMT 49 Labour Charge for removing existing block and Refix. 288.18 SMT 50 Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. 213.15 SMT 51 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. 502.95 SMT 52 Providing wood work in frames of false-ceiling, partitions etc sawn and put up in position. (A) Indian Teak Wood (More than 10 ton) 725.02 Cu.Dm. 53 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (More than 10 ton) 68.67 Kg 54 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (i) Fully Glazed. 3852.45 SMT Wood Work 122 x 61 x 3.6mm ) 115.73 Kg 64 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(E) 50mm 157.5 RMT 65 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm 263.55 RMT Roof Covering Water Supply Plumbing & Sanitary Fitting
