|
| 1 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :all kinds of soil |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.all kinds of soil |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil 1 metter from cutting edge |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 7 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: |
| 12 | Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 14 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 16 | Suspended floors, roofs, landings, balconies and access platforms. |
| 17 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Arches, domes, vaults upto 6 m span |
| 19 | Extra for shuttering in circular work (20% of respective centering and Shuttering items)Foundations, footings, bases of columns etc. for mass concrete. |
| 20 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 21 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 22 | Arches, domes, vaults upto 6 m span |
| 23 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level TMT |
| 25 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded |
| 26 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 27 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 28 | RANDOM RUBBLE MASONRYRandom Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: (Quarry Stone)Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):first class kail wood |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. first class kail wood |
| 31 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : first class kail wood |
| 32 | p/l of 50mm thick DPC band over stone work in 1:2:4Mix |
| 33 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 34 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge) |
| 35 | 12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand) |
| 36 | 1 : 4 ( 1 cement : 4 fine sand) |
| 37 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats on new work |
| 39 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 40 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 41 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 42 | Providing and fixing plained eaves boarding. (II Class kail Wood)300x40 mm (nominal size) |
| 43 | Providing and fixing of 0.5mm Color GS Sheet Soffitboardingincluding Backing, supports etc complete job |
| 44 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1mm thick |
| 45 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm |
| 46 | Providing and fixing G.I. pipes (B medium) complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore |
| 47 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.15 mm and 20 mm dia. G.I. pipes |
| 48 | 25 mm and 32 mm dia. G.I. pipes |
| 49 | 40 mm and 50 mm dia. G.I. pipes |
| 50 | 65 mm and 80 mm dia. G.I. pipes |
| 51 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes |
| 52 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket 100mm dia pipes |
| 53 | 150mm Dia pipes |
| 54 | 80mm Dia Pipes |
| 55 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 56 | 50 to 80 mm nominal bore |
| 57 | Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 50mm dia GI pipe |
| 58 | 80 mm dia. |
| 59 | 100 mm dia. |
| 60 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.80mm dia |
| 61 | 100 mm dia. |
| 62 | 150 mm dia. |
| 63 | Providing & fixing White vitreous china water closet squatting pan (Indian type)along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\"trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm |
| 64 | Providing and Fixing stainless steel A ISI 304 (18/8) Kitchen Sink as per is: 13983 with ciand stainless steel plug 40mm, including painting of footings and , cutting and making good the walls wherever requiredKitchen sink 610x510 mm bowl depth 200 mm |
| 65 | Providing & Fixing of Trap 100 dia |
| 66 | Providing & Fixing 50mm PVC ventpipe |
| 67 | Tee 100x100 |
| 68 | 100 Bend |
| 69 | Providing and Fixing of Water storage tank including fittings |
| 70 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND: 5kms |
| 71 | Beyond 5 km upto 10 km per km |
| 72 | Beyond 10 km upto 20 km per km |
| 73 | Beyond 20 km per additional km (25Kms) |
| 74 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 20mm5kms |
| 75 | Beyond 5 km upto 10 km per km |
| 76 | Beyond 10 km upto 20 km per km |
| 77 | Beyond 20 km per additional km (25Kms) |
| 78 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above : 5kms |
| 79 | Beyond 5 km upto 10 km per km |
| 80 | Beyond 10 km upto 20 km per km |
| 81 | Beyond 20 km per additional km (25Kms) |
| 82 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :5kms |
| 83 | Beyond 5 km upto 10 km per km |
| 84 | Beyond 10 km upto 20 km per km |
| 85 | Beyond 20 km per additional km (35Kms) |
| 86 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets:5kms |
| 87 | Beyond 5 km upto 10 km per km |
| 88 | Beyond 10 km upto 20 km per km |
| 89 | Beyond 20 km per additional km (25Kms) |
| 90 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement: 5kms |
| 91 | Beyond 5 km upto 10 km per km |
| 92 | Beyond 10 km upto 20 km per km |
| 93 | Beyond 20 km per additional km (25Kms) |
| 94 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks: 5kms |
| 95 | Beyond 5 km upto 10 km per km |
| 96 | Beyond 10 km upto 20 km per km |
| 97 | Beyond 20 km per additional km (25Kms) |
| 98 | Carriage of G.I./D.I pipes below 100mm dia from Stocking yard to the site by mechanical means5km |
| 99 | Beyond 5 km upto 10 km per km |
| 100 | Beyond 10 km upto 20 km per km |
| 101 | Beyond 20 km per additional km (25Kms) |
| 102 | Carriage of G.I/D.I. pipes 100mm dia from Stocking yard to the site by mechanical means 5kms |
| 103 | Beyond 5 km upto 10 km per km |
| 104 | Beyond 10 km upto 20 km per km |
| 105 | Beyond 20 km per additional km (25Kms) |
| 106 | Carriage of G.I/D.I. pipes 150mm dia from Stocking yard to the site by mechanical means 5kms |
| 107 | Beyond 5 km upto 10 km per km |
| 108 | Beyond 10 km upto 20 km per km |
| 109 | Beyond 20 km per additional km (25Kms) |
| 110 | Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand) ist 50m |
| 111 | Beyond Ist 50m 2000Mtrs |
| 112 | Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm ist 50m |
| 113 | Beyond Ist 50m 2000Mtrs |
| 114 | Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above ist 50m |
| 115 | Beyond Ist 50m 2000Mtrs |
| 116 | Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling ist 50m |
| 117 | Beyond Ist 50m 2000Mtrs |
| 118 | Carriage of materials by manual means including loading, unloading, stacking of materials- Steel/CGI Sheets ist 50m |
| 119 | Beyond Ist 50m 2000Mtrs |
| 120 | Carriage of materials by manual means including loading, unloading, stacking of materials- Cement ist 50m |
| 121 | Beyond Ist 50m 2000Mtrs |
| 122 | Carriage of materials by manual means including loading, unloading, stacking of materials- Brick ist 50m |
| 123 | Beyond Ist 50m 2000Mtrs |
| 124 | Carriage of G.I./D.I pipes below 100mm dia from dumping siteto actual site of work by manual means ist 50m |
| 125 | Beyond Ist 50m upto 500Mtrs |
| 126 | Carriage of G.I./D.I pipes 100mm dia from dumping siteto actual site of work by manual means ist 50m |
| 127 | Beyond Ist 50m upto (1500Mtrs) |
| 128 | Carriage of G.I./D.I pipes 150mm dia from dumping siteto actual site of work by manual means ist 50m |
| 129 | Beyond Ist 50m upto (5000Mtrs) |
| 130 | Restorationof Road Berm Along Pipe allignment to be damaged |
| 131 | Restoration of W.B.M road at spots 1000 mt @Rs 100/mt |
| 132 | Cutting bajri paths and making good the same including supply of extraquantities of brick aggregate, moorum and red bajri required. |
| 133 | Supply of labour for cutting the bitmunious road surfaces manually, |
| 134 | Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil. |
| 135 | P/F of PVC sanitary fittingswith all accessioriesPVC pipe 100mm |
| 136 | PVC pipe 75mm |
| 137 | Angle Valve |
| 138 | Bib Cock CP |
| 139 | Basin Mixer CP |
| 140 | PVC Flow trap |
| 141 | Door bend/Tee 100mm/75mm |
| 142 | PVC bends 100/75mm |
| 143 | 15mm dia internal pipe |
| 144 | Floor Trap for 75/100mm pipe with grating |
| 145 | Bevelled edge mirror 450x600 |
| 146 | P/F of electrition items of reputed make with ISI mark complete job including cost of MCBs etcLighting points 1.5mm sq wire |
| 147 | Heating points 2.5mm sq wire |
| 148 | P/F of ceiling fan 1200mm sweep |
| 149 | P/F of exaust fan 300mm |
| 150 | P/F of 50 liter Gyser inclding all fitting/fixures complete |
| 151 | P/F of service line of 10 sqm copper |
| 152 | Luminous inverter along with 180 AH 12 volt battery |
| 153 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 154 | Providig and fixing hardware itemsto Doors and WindowsMain Door (link locks) |
| 155 | Butt hinges 100/75mm |
| 156 | Tower bolts 100mm |
| 157 | Handles 100mm |
| 158 | Handles 125 mm |
| 159 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaftwith brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing andfixing necessary 27.5 cm long wire springs manufactured from high tensilesteel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover |
| 160 | Providing fixing of MS Bends , tees etc incl. the cost of MS tubes, Nuts bolts washers flanges incl welding charges all types of carriages complete Job |
| 161 | P/F of G. Valves 65mm |
| 162 | 50mm |
| 163 | 40mm |
| 164 | 25mm |
| 165 | P/F of G.I Uniouns65mm |
| 166 | 50mm |
| 167 | 40mm |
| 168 | 25mm |
| 169 | 20mm |
| 170 | 15mm |
| 171 | P/F of G.I Bends/Elbows65mm |
| 172 | 50mm |
| 173 | 40mm |
| 174 | 25mm |
| 175 | 20mm |
| 176 | 15mm |
| 177 | P/F of G.I Reducer Sockets65mm x 50mm |
| 178 | 65mm x 40mm |
| 179 | 50mm x 40mm |
| 180 | 40mm x 25mm |
| 181 | 40mm x 20mm |
| 182 | 25mm x 20mm |
| 183 | 20mm x15mm |
| 184 | P/F of G.I Nipples of different lengths65mm |
| 185 | 50mm |
| 186 | 40mm |
| 187 | 25mm |
| 188 | 20mm |
| 189 | 15mm |
| 190 | P/F of G.I Tees65mm x 50mm x 65mm |
| 191 | 65mm x 40mm x 65mm |
| 192 | 65mm x 25mm x 65mm |
| 193 | 50mm x 50mm x 50mm |
| 194 | 50mm x 40mm x 50mm |
| 195 | 50mm x 25mm x 50mm |
| 196 | 50mm x 20mm x 50mm |
| 197 | 40mm x 40mm x 40mm |
| 198 | 40mm x 25mm x 40mm |
| 199 | 40mm x 20mm x 40mm |
| 200 | 25mm x 25mm x 25mm |
| 201 | 25mm x 20mm x 25mm |
