|
| 1 | Laser cutting machine: - 1000 mm X 1300mm SURFACE/CUTTING BED, CUTTING MATERIAL NON METAL (Leather, Fabric, Wool, Wood, MDF, Foam, Paper, Acrylic ETC) USB Connected, LASER POWER -60-100W or above, Cutting Speed 50,000mm/Min or above, Software support - (Corel Draw, Photoshop, AutoCad, etc.), LCD screen, AUTOMATIC, withsafety sensor device (automatic shutdown when door open), with exhaust system, with sound system whenON/OFF |
| 2 | Arc welding Machine Input Power: 12 KVAInput Voltage: 380V AC or abovePhase: ThreeMax. O/P Current : 320 AmpNo Load Voltage : 60V (with all the necessary accessories) |
| 3 | Rotary Hammer drill machine Drilling dia. In concrete = 4-22 mmDrilling dia. In metal= 13 mmDrilling dia. In wood= 30 mmDrilling dia. In concrete= 30 mmPower input = 720 WImpact rated speed = 0-4800 BPMwith drill bit and other tools |
| 4 | Hand Electrical Cutter Power input = 1200 WNo- load speed= 12000 RPMTool blade= 4 inchCutting depth= 34 mm |
| 5 | Small Angle Grinder No-Load speed= 11000 RPMPower input= 670 WDisc dia. = 100mm |
| 6 | Angle Grinder 4”Power input = 900wNo-load speed=11,000 rpmDisc dia. = 100mm |
| 7 | Angle Grinder 5”Power input = 900wNo load speed= 2,800 - 11,000 rpmDisc diameter = 125 mm |
| 8 | Angular Miter Saw Power input = 1700wCutting capacity 0 deg = 89mm Cutting capacity 45 deg = 67mm45 degree mitre & Inclination No- load speed: = 4800 RPMsaw blade bore = 25.4 mmSaw blade diameter: = 255mm |
| 9 | Random orbit Sander 5\" Sanding disc dia. 125mmNo- load speed = 12000 RPMOrbital stroke rate = 24000 RPMPower input = 250 W |
| 10 | Random Orbit Sander 6\" with dust extraction Sanding pad diameter = 150mmOrbit diameter = 4 mmNo-load speed = 12000 RPMOrbital stroke rate = 24000 RPMPower input = 330 W |
| 11 | Palm Router Power input = 550 wBit size = 6.25mmNo-load speed = 33,000 RPM |
| 12 | Vacuum CleanerPower Input = 1250 wVacuum pressure = 200 MBRAir Flow =63L/SecDust Tank capacity = 25 LTank capacity net dry/wet = 21/16 L |
| 13 | Drill MachineChuck capacity = 1-13 mmDrill Dia. in steel = 13/8 mmWood = 32/20 mmPower = 550 W1900 RPM |
| 14 | Pedestal Grinder (Double sided)Power = 600 wGrinding disc bore = 32 mmDisc Diameter = 200 mm3000 RPMGrinding disc width = 25 mm |
| 15 | Jig SawCutting depth in non-alloyed metal = 10 mmPower = 780 w3100 SPMWood cutting Depth = 6 inch |
| 16 | PlannerPower = 650 w 16500 RPMPlaning width 82 mmCutting Depth = 2.5 mm |
| 17 | Router (Heavy Use)Power input = 1300 wNo-load speed = 11000-28000 RPMBit holder = 6-8 mmRouter bit diameter = 40 mm |
| 18 | Plier Medium |
| 19 | Pincer Medium |
| 20 | Nose Plier Medium |
| 21 | Screw Driver + - Big |
| 22 | Screw Driver + - Small |
| 23 | Screw Driver + - Medium |
| 24 | Iron Ball pin Hammer Regular |
| 25 | Claw hammer Regular |
| 26 | Rubber Ball pin Hammer Regular |
| 27 | Bench Vice Regular |
| 28 | C Clamp Medium |
| 29 | C Clamp Large with adjustable bar |
| 30 | Hand Hex- Saw Regular |
| 31 | Thread Saw Regular |
| 32 | Hand Saw Large |
| 33 | Hand Saw Medium |
| 34 | Hand Saw Small |
| 35 | Filer For Metal Flat |
| 36 | Filer For Metal Half Round |
| 37 | Filer For Metal Triangular |
| 38 | Filer For Metal Square |
| 39 | Filer For Wood Flat |
| 40 | Filer For Wood Half Round |
| 41 | Filer For Wood Triangular |
| 42 | Filer For Wood Square |
| 43 | Sheet Cutter Medium |
| 44 | Sheet Cutter Small |
| 45 | Pipe Wrench Regular |
| 46 | Allen & Key Set Regular |
| 47 | Key Set 6 no - 32 no |
| 48 | Vernier Caliper 12 inch |
| 49 | Micro meter 0-25 mm |
| 50 | Drill Bit Set for metal 2-10 mm |
| 51 | Drill Bit Set for wood 2-10 mm |
| 52 | Drill Bit Set for concrete 2-10 mm |
