Fabrication And Supply Of Foam Tender - 1. Suction Hose ( Isi Marked ) Of Rubber Of 100 Mm Internal Dia Meter In 2.5 M Lengths ( Is 2410-1963 With Latest Amendments If Any ) Fitted With 100 Mm Suction Hose Male / Female Couplings ( Is3549:1983, With-Karnataka

Fabrication And Supply Of Foam Tender - 1. Suction Hose ( Isi Marked ) Of Rubber Of 100 Mm Internal Dia Meter In 2.5 M Lengths ( Is 2410-1963 With Latest Amendments If Any ) Fitted With 100 Mm Suction Hose Male / Female Couplings ( Is3549:1983, With Latest Amendments If Any ) 04 Nos. 2. Aluminum Extension Ladder 10.5Mtrs. Long ( Is4571:1977 ( With Latest Amendment If Any ) 01 No. 3. High Expansion Foam Generator 01 No. 4. Suction Strainer 100 Mm Size Steel ( Is907:1965 With Latest Amendments If Any ) 01No. 5. Basket Strainer Cylindrical Type ( Is3592:1966 With Latest Amendment If Any ) 01No. 6. Suction Wrenches For 100 Mm Suction Couplings ( Is4643:1984 With Latest Amendments If Any ) 02Nos. 7. Branch With Plain Nozzle Of Various Sizes For 63Mm ( 25Mm, 19 Mm ) Is903:1993. 01 Each 8. Foam Making Branch 5X Type With Pick Up Tube, As Per Is:2097:1983 02 Nos. 9. Foam Making Branch- Fmb 0X Type With Pick Up Tube, As Per Is:2097:1983 01 No. 10. Foam Making Branch – Fmb 10X Type With Pick Up Tube, As Per Is:2097:1983 01 No. 11. Manila Rope 32 Mm Dia For Lowering Line Of 30Mtrs. Long With Sealed Ends 01 No. 12. Nylone Rope 24 Mm Dia For Long Line Of 30Mtrs. Long With Sealed Ends 01 No. 13. Rope Polyamide 22 Mm Dia For Short Line Of 20Mtrs. Long With Sealed Ends. 01No. 14. Rubber Gloves As Per Is 4770:1991 Tested For Exposure To High Voltages Of 11000 Volts ( Large Size ) 04Pairs 15. Spanner Adjustable, 30 Cm Long 01 No. 16. Oil Feeder Standard Capacity 01No. 17. Funnel 300 Mm Dia Made From Gi 18 Swg Sheet 01 No. 18. Tool Kit ( Fixed Spanners, Ring Spanners, Screw Drivers And Pliers Insulated ) 01No. 19. Hydraulic Jack Of 20-Ton Capacity With Handle 01No.   20. Control Type Branch ( Smart Nozzle ) { Inlet: 63 Mm, Working Pressure: 600 Lpm To 800 Lpm, The Nozzle Should Be Designed To Have Zero Torque, Should Not Have Any Upward Reaction Force And Shall Not Bounce When Kept On Ground At 7 Bar Pressure. Spray, Jet And Shut Off Should Be Presented By Rotating The Tip Of The Nozzle. Adjusting The Flow By Rotation Of The Tip Of The Nozzle. 02 Nos. 21. Bolt Cutter–600 Mm Long 02No. 22. Tyre Lever 01No. 23. Plier Cutting 01No. 24. Plier Insulated 01No.

INR 550 /-

INR 100000.0 /-

Refer document