|
| 1 | Dismantling of bucket from machine by removing worn-out pins, bushing, seal dust etc and repairing by providing & fixing of M.S plate of size 180mmx 550mm x 4 Nos. (8mm sheet) of bucket with the help of D.G set, welding set & Gas cutter etc. and assembling after providing and fitting of following parts(2 to 13). (Machine No.16825&16827) |
| 2 | Cutter (LH) Conf. to Part No. 155 BH 12734 |
| 3 | Cutter (RH) Conf. to Part No. 155 BH 12742 |
| 4 | Bolt Conf. to Part No. 156 BH 10156 |
| 5 | Nut Conf. to Part No. CFN 50 02228 |
| 6 | Bushing Conf. to Part No. 155 BH 15545 |
| 7 | Bushing Conf. to Part No. 155 BH 14824 |
| 8 | Pin Conf. to Part No. 155 BH 03224 |
| 9 | Pin Conf. to Part No. 155 BH 03232 |
| 10 | Bolt Conf. to Part No. CFB 02 21640 |
| 11 | Nut Conf. to Part No. CFN 01 21615 |
| 12 | Tooth Conf. to Part No. 160 BH 31646 |
| 13 | Pin Conf. to Part No. CFP15 02516 |
| 14 | Repairing of Rod Piston of Boom Cylinder by welding, machining and chroming for removing pit and scratch etc. including cartage from site to workshop and back after repair.(Machine No.16825) |
| 15 | Providing and Fixing of Boom Cylinder Seal Kit conf. to part no. 155 HC 02371(LH) |
| 16 | Providing & replacement of Radiator Assembly conf. to part no. 156 EC 03003 with the help of Hydra Crane and Tool and Tackle as required. (Machine No.16827) |
| 17 | Opening the Radiator Assembly from the Hydraulic Excavator with the help of T & P and Hydraulic Crane of suitable capacity at site repairing of damage/ leaked copper tubes and cleaning/ washing in upper & down tanks and tubes in workshop and fitting the same with the help of Hydraulic Crane in the machines within the help of Hydraulic Crane including cartage from site to workshop and back after repair. (Machine No.16825) |
| 18 | Dismantling of Crawler Track Assembly of the machine with the help of tool & tackle, Gas cutter & Hydraulic Jack etc. and assembling the same by providing & fitting of following parts from (19 to 26) with the help of special T & P complete as required at site.(Machine No.16827) |
| 19 | Shoe Track Conf. to Part No. 155 CT 11229 |
| 20 | Bolt Shoe Conf. to Part No. BFB 3411858 |
| 21 | Nut Shoe Conf. to Part No. BFN 2711824 |
| 22 | Link Track (LH) conf. to part no.155 CT 51243 |
| 23 | Link Track (RH) conf. to part no.155 CT 51268 |
| 24 | Pin Regular conf. to part no.155 CT 11083 |
| 25 | Bushing Regular conf. to part no.155 CT 11034 |
| 26 | Seal Dust Regular Conf. to Part No. 155 CT 61069 |
| 27 | Providing, replacement, repairing & welding of Excavator Engine Cabin Body, Operator Cabin with 6mm & 4mm thickness M.S. Sheet of various sizes. 1.90mtr. x 2.10mtr. x 2 Nos. (6mm Sheet)1.60mtr. x 0.60mtr. x 1 Nos. (4mm Sheet) |
| 28 | Scrapping, Cleaning & Painting of complete machine including Boom with approved colour enamel paint including putty filling & applying 2 coats of I.S.I mark enamel paint after applying primer on body i/c writing Machine No., Division Name etc. complete as required. |
