Provision Of Store Room For General Storage Pupose On 03 Acres Cg Land At Cgae Bhubaneswar Under Ge ( I ) ( Cg ) Bhubaneswar--- 1 STORE ROOMSurface excavation n.exe 30 cm deep and averaging 21 cm deep and getting outin soft and loose soil complete all as specified and directed. 2 Excavating in trenches, n.exc. 1.5 m wide and n.exc 1.5 m in depths; for foundation etc. or for shafts, well, cesspits, manholes, peir holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft and loose soil all as specifed and directed. 3 M & L Cement concrete, type D 2, 1:4:8 ( 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed. 4 M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as specified as directed. 5 M & L Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as specified as directed. 6 Damp proof course to horizontal or vertical surfaces including necessary formwork 7 M&L forproviding, Reinforced cement concrete (Nominal Mix)for Chajjas Type B1 1:2:4(20 mm graded stone aggregate) all as specified and directed. 8 M&L forproviding, Reinforced cement concrete (Nominal Mix)for Beams, cantilevers,bressummers, lintels over 1.5 m spanType B1 1:2:4(20 mm graded stone aggregate) all as specified and directed. 9 M&L forproviding, Reinforced cement concrete (Nominal Mix)for roofs, landings, balconies, canopies, deck slabs and in shelves and the likeType B1 1:2:4(20 mm graded stone aggregate) all as specified and directed. 10 M&L forproviding, Reinforced cement concrete (Nominal Mix)for Columns, pillars, piers, posts and struts Type B1 1:2:4(20 mm graded stone aggregate) all as specified and directed. 11 M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions as specified as directed. 12 M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges as specified as directed. 13 M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. as specified as directed. 14 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) 15 S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 16 All as per item no 14above but 6 mm to 8 mm dia bar 17 All as per item no14above but 5 mm dia and over upto incl 10mm dia in stirrups. 18 M& L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 19 M&L for Providing precast ce- ment concrete type B1 1:2:4(20 mm graded aggregate)in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4complete with joints to match 20 M & L rendering 15mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:4finished surfacesfair & even using WPC (Water Proofing Compound) as per manufacturers instructions complete all as specified and directed.Note : WPC measured and paid separetly. 21 M & L rendering 10mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:6finished surfaces fair and even complete all as specified and directed. 22 M & L rendering 5mm thick on concrete ceiling surfaces in cement mortar 1:3finished surfaces fair and even complete all as specified and directed. 23 M&L for sand filling under floors or in foundations including watering and consolidation all as specified and directed. 24 M&L Hardcore of gauge n exc 63 mm of brocken stone or boulders deposited. Spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface. 25 M&L for 100mm thick plaincement concrete type D2 (1:4:8) 40mm graded stoneaggregate floor sub base all as specified and directed. 26 M&L for 40mm thick plaincement concrete type B1 (1:2:4) 20mm graded stoneaggregate floor finishess with using extra cement all as specified and directed. 27 M & L for Screed bed or bedding layer of cement mortarin 1:6, 15 mm thick for laying floor finishesall as Specified and directed by Engineer In Charge. 28 M&L for Machine cut kota stone slab flooring 18-20 mm thick over ceme nt screed base laid and jointed with grey cememnt slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 29 M & L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed. 30 Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) 31 S&F5.5 thick sheetglass,odinary quality and glazing with oil putty in squareexc 0.5m in each pane complete all as specified and as directed. 32 S&F5.5 thick sheetglass,odinary quality and glazing with oil putty in squaren exc 0.5 sq. m in each pane complete all as specified and as directed. 33 S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 34 Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing 35 Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 36 S&F butt hinges 100 mm long ,medium weight, cold rolled mild steel all as specified and directed. 37 S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections orast-aluminium alloyall as specified and directed. 38 S&F 150 mm longaluminium handles, cast type,anodised all as specified and directed. 39 S&F 200 mm long aluminium anodised,barrel tower bolts of extruded section all as specified and directed. 40 S&F of roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, tubular channel or flat sections) including distance pieces, cleats etc.complete using ERW or induction butt weldedtubes conforming to I. S.1161- 1979 grade St.-240 41 S&F of plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment( confirming to Fe-410-W(Gde-E-250) quality-A) 42 S&F mild steel bolts of dia exe 12 mm n.exe 20 mm purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends;each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. 43 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long. 44 S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L-type or J-type or cranked hook bolts with bitumin washer all as specified and directed. 45 S & F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 46 M&L plain cement concrete (1:3:6) type C-2(using 40 mm graded stone aggregated), 75 mm thick as in plinth protection complete all as specified and directed. 47 Integral waterfroofing compound 48 M&L three coats of white wash to newly plastered surface of ceiling incl preparation of surfaces complete all as specified and directed. 49 M&L for preparing surfaces plastered or unplastered and apply three coats of white wash for internal preparing new surface 50 M&L for preparation of newly plastered surfaces and applying two coats of cement base paint. 51 M&L preparation of plastered surface of wall and applying two coat of oil emulsion distemper over a coat of alkalic resistant priming paint complete all as specified and directed. 52 Material & Labour for Preparing old plastered or unplastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. 53 M&L for preparingsurface of steel and iron work of new surfaces and of any description over 10 CM width or girth ,not other wise describeand applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 54 M&L colouredNon-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. premium quality, Gr-1 setand jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and directed. 55 M&L colourglazed ceramic coloured tiles 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match with and including 10 mm thick screed bed or bedding layers in cement mortar (1:3)complete all as specified and directed. 56 S&F Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern and pipe) complete all as specified and directed. 57 S&F PVC valveless, syphonic action type low level flushing cistern, white, 10 ltrs capacity, including all fittings and flush pipe, PVC connection pipe, inlet ball valve, float and handle including brackets complete all as specified and directed. 58 S&F vitreous china wash basin, white, flat back, size 550 mm x 400mm including all fittings including cutting for andpinning in ends of brackets or erecting stand etc with CP waste coupling of 32mm bore, PVC waste pipe of 32 mm dia cast iron bracket & 15 mm bore PVC connector pipe of 450mm long complete all as specified and directed. (Note : Waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets & PVC connector pipe etc shall be deemed to be included in the quoted rate) 59 S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thck AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 60 S&F chromium platedBib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. 61 S&Fstop valves 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. 62 S & F of health faucet with wall 8mm dia,1.2 mtr longflexible tube & wall hook for EWC including hinges with complite fitting, Make :Parryware (E8372A1) or eqivalent as approved. 63 S&F soap dish,vitreous china white ,approximate size 160x160x90 mm fixed with CP screw complete all as specified and directed. 64 S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) 65 S&F 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettered HOT or COLD with long screwed sunk and fly nuts complete all as specified and directed. 66 M&L 100mm dia outlet of Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. 67 S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed 68 S&F 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed 69 S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed 70 S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed 71 S&F 110mm bore PVC (SWR) junction single Tee equal or unequal complete all as specified and directed 72 S & F 500 litres capacity rotational moulded polyethylene water storage tanks with lids (multi layer minimum 3 layered) (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. 73 S&F 20 mm bore medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. 74 S&F 15 mm bore medium grade galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. 75 Cutting chases for concealed water tubing or concealed conduit wiring pipe where making good to facing required and pointing in cement mortar 1:3 etc. in Brickwand and concrete. Walls & cutting not exceeding 10 cm girth complete all as specified and directed. 76 S&F 15 mm bore gun metal ,globe or gate valve,with iron wheel head screwed both ends for iron pipe complete all as specified and directed. 77 Cutting 150mm dia pipe into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed. 78 S&F 110mm bore PVC(SWR) vent cowl complete all as specified and directed. 79 M&L rendering 10mm thick cement mortar 1:4 on concrete surfaces as in roof treatmentusing WPC @3% by weight even & smooth without using extra cement complete all as specified and directed. (NOTE: WPC measured and paid separetly) 80 Supply only integral water proofing compound [ISI marked] of approved make. 81 S&F PVC connection pipe 15mm size & 450mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed. 82 M&L powdered coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. 83 M&L powered coated anodised aluminium sliding window and ventilator shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. for fixing glass panes in frames & including fixing of glass pane complete all as specified and directed. (Note : (i)Glass Pane shall be measured & paid separately as supply only.(ii)Minimum thickness of powder coating 50 micron.) 84 Supply only5.5 thick sheetglass, odinary quality in square n exc 0.5m in each pane complete all as specified and directed. 85 S&F factory made solid PVC door frame of size50 mm x 47 mm made out of 5 mm thick plain colour PVC sheetreinforced with mild steel square tube in opening as per specification and drawing complete all as specified and directed. 86 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications complete all as specified and directed. 87 S&F aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed 88 S&F aluminium handle150 mm long extruded section complete all as specified and directed. 89 S&F aluminium barrel tower bolt, 150 mm long, extruded section complete all as specified anddirected. 90 S&F cold rolled mild steel butt hinges 100 mm long, medium weight complete all as specified and directed. 91 S&F 18 to 20 mmthick granite slab, machine cut, laid over screed bed, beddedand jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting and polishingtypes with and including15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 92 Providing & Fixing false ceiling at all height with GRG(Glass Fiber Reinforced Gypsum) false ceiling tiles of size 575x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (Part 4 )- 1970 and light reflection of 85% (minimum) to be laid in true horizontal level (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15x32mm of lenght 3000mm, gross-T of size 15x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15x 32mm of lenght 600mm to form grid module of size 600x 600 mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm lenght and L-shape level adjuster of size 85x 25x2mm. Galvanized iron perimeter wall angle of size 24x 24x 0.40mm of lenght 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. with semi perfotrated 12 mm thick mirco tegular edged GRC false ceiling tiles. 93 SEWAGE DISPOSALExcavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, not exc 10 sqm on plan and n exc 1.5 m depth and getting out in soft/loose soil. 94 Returning filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil. 95 Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point. 96 PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. 97 Concrete bed to drain pipes of size 150 mm bore packingunder and haunching against the sides of pipes after theyare laid and fitted in cement concrete, Type C2, 1:3:6,using 40mm graded stone aggregate complete all asspecified and as directed. 98 Brick work with Fly ash Modular bricks straight or curvedin plan exc 6 mtr mean radius built in CM (1:6) completeall as specified and as directed. 99 PCC 1:2:4, Type B–0, using 12.5 mm graded stone aggregate as in coping including use and waste of formwork and finishing the exposed faces of concrete evenand smooth without using extra cement complete all asspecified and as directed. 100 PCC 1:2:4 type B2 (using 40mm graded stone aggregateas in surface channels/benching and drains complete allas specified and directed. 101 Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete wall surfaces of any description using WPC and finishing surfaces even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid separately under respective items in this schedule) 102 Supply only integral water proofing compound [ISI marked] of approved make. 103 Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc],chullah hoods, Chajjas, water troughs, mangers, Shelvesand similar articles with plain faces including formwork,set in cement mortar 1:4 complete all as specified and asdirected. 104 Reinforcement using High Strength Corrosion ResistantDeformed TMT Bars of Grade Fe–500D of 5mm dia andover up to 10mm dia, required in stirrups, spacers &binders, cut to length, bent to shape required, bindingwith & including mild steel wire (annealed) not less than0.9mm dia or securing with clips quality complete all asspecified. 105 Reinforced concrete pipes, class NP2, 150 mm dia laid in trenches and jointed complete with collars complete all as specified and directed. 106 150mm dia Salt-glazed stoneware drain pipes, class A, laid in trenches and jointed complete all as specified and directed. 107 Cutting into existing manholes for connecting new drains of Internal dia of pipe in 150 mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 108 INTERNAL ELECTRIFICATIONMaterial and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbedsurface complete, including single core solid conductor copper1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. 109 (a) One light point & Fan point controlled by one way switch. 110 (b) One 3 pin socket outlet, 5/6 amps, on independent board. 111 All as per item No 1 (a) here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed. 112 S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed. 113 S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. 114 S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. 115 S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed. 116 Supply and fix ceiling rose, surface bakelite,65 x 50mm,three terminals all as specified and directed. 117 S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed. 118 S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed. 119 S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed. 120 S&F Modular Metal Flush Box 2 module complete all as specified and as directed. 121 S&F Modular Metal Flush Box 3 module complete all as specified and as directed. 122 S&F Modular Metal Flush Box 4 module complete all as specified and as directed. 123 Supply & fix LED tube light 20 W Fitting Smart Bright extruded aluminium batten available in 4 ft run length with Lumen efficacy 125 lm/watt and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Crompton No. CCS-100-2--65-HL2-DP-NWH (4 ft)Eqv Crompton/ Havells/ pHILIPS 124 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete 125 Supply and fixingof Square Recessed mounted LED of full lit luminaire with glare free uniform illuminationof capacity 24/36 watt (2ftx2ft) PDC white finish aluminiumhousing with high translucent frosted plastic diffuser with efficacy of 100lm/w.( Make/Model No:-LCTLRNE-24-FO-CDL(POLARIS NIO-I) of Cromptonor equivalent of Philips & Wipro. 126 S&FMCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces,complete all as specified.(Make : L&T/Legrend/Havells 127 Supply and fixMCB single pole and neutral, 240 volts,32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. (Make : L&T/Legrend/Havells 128 Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make :(Make : L&T/Legrend/Havells 129 M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal groundlevel connectedto earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mmstone aggregate forchamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGIfunnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009and connected to earth test point incl testing complete all as specified anddirected . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item. 130 Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata) 131 Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient 132 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed Make: Havells/ Usha/Crompton/orient 133 Supply and fixing wal mounted fans Sweep (mm) : 400 Air delivery : 5700 M3/HrRPM : 200Oscillation & speed control by pull cord mechanism , Specially designed motor gives high air thrust @ 2000 RPM completeaccessories Complete all as specified and directed Make: Havells/ Usha/Crompton/ orient 134 Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 2.5 sqmm (Nominal area) PVC insulated unsheathed cabledrawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 2.5 sqmm sizeas earth wire drawn in same conduit complete all as specified and directed . 135 Supply & fixing Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 10 watt.including provn of necessary connection complete.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Bajaj/Wipro) 136 EXTERNAL ELECTRIFICATIONExcavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft soil for laying of cables, foundation of poles, and stay assembly complete all as specified and directed. 137 Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed. 138 S&L well burnt sub class ‘B’ bricks (using old size brick) laidin trenches above sand cushioning for cable protection complete. 139 Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. 140 Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. 141 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core 142 M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal groundlevel connectedto galvanised iron strip 25×4mmdia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mmstone aggregate forchamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGIfunnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009and connected to earth test point incl testing complete all as specified anddirected . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item. 143 M & L forcutting the existing concrete/bituminious road surface width n.exe 30 cm and making good the surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone sggregate over consolidated/rammed earth surface all as specified and directed 144 M&L GI pipe light grade with all fitting laid in trenches and under road/floor/culverts along with pole etc 50mm bore. Make : Tata/Jindal/Surya
