|
| 1 | Taking down chowkhats or frames(without taking off shutters from the frames) n.exc 1.5 Sqm eachand removing from site, complete all as specified and directed. |
| 2 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 Sqmandnot exceeding 4.0 Sqm each removing form site, complete all as specified and directed. |
| 3 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed. |
| 4 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & shown in drawing mentioned in SSR Part-II 2020, complete all as specified and directed. |
| 5 | M&L for 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete all as specified and directed. |
| 6 | M&L for 125 mm long extruded aluminium alloy handles size fabricated type anodised (ISI marked), complete all as specified and directed. |
| 7 | S&F for 75mm long mild steel steel butt hinges medium weight, fixed to PVC doors, complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed. |
| 9 | M&L for 50mm thick PCCtype C-1, 1:3:6 (using 20mm graded crushed stone aggregate)as in plinth protection, laid in slope 1:12 from outer edge of the wall,finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand( all by weight) complete after demolation of old cement concrete all as specified and directed. |
| 10 | Taking down old unserviceable GI pipe of 15 /20mm bore with all fittings etc, complete all as specified and directed. |
| 11 | S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed. |
| 12 | S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed. |
| 13 | Fixing only 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specified and directed. |
| 14 | Fixing only 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specified and directed. |
| 15 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 16 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed. |
| 17 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built incement mortar 1:4, complete all as specified and directed. |
| 18 | Description all as per Srl item No. 17 above but except stone.NOTE: Old brick retrieved from demolition shall be used. |
| 19 | M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed. |
| 20 | Description all as per Srl item No. 19 above but except stone.NOTE: Old stone retrieved from demolition shall be used. |
| 21 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds with maximum depression on facefrom straight edge held against the dressed surface n exc 20 mm for lime or sand stone and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 22 | M&L for rendering 20mm thick in cement mortar 1:6 on stone masonry surface or other than fair faces of surface, finished even and smooth without using extra cement complete all as specifed and directed. |
| 23 | M&L for rendering 15mm thick in cement mortar 1:6 on brick wall surface or other than fair faces of surface,finished even and smooth without using extra cement complete all as specifed and directed. |
| 24 | M&L for rendering 20 mm thickon stone masonry surface on wall ,in cement mortar 1:4finished even and smooth without using extra cementcomplete all as specified and directed. |
| 25 | M&L for rendering 15 mm thickon concrete / brick surface on wallin cement mortar 1:4finished even and smooth without using extra cementcomplete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over 1.50mm thick wall care putty, complete all as specified and directed. |
| 28 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed. |
| 29 | M&L for 25mm thick cement concrete type B-1 1:2:4 (using 20 graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 30 | S&F for 500 ltr capacity three layer (ISI marked) rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball brass valves, high pressure, with polythene float and flynut inlcuding dismantling old tank any capacity complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 31 | S&F for 1000 ltr capacity three layer (ISI marked) rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball brass valves, high pressure, with polythene float and flynut inlcuding dismantling old tank any capacity complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 32 | S&F for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipesetc. Complete as in repair all as specified and directed. |
| 33 | S&F for brass chromium plated tubular towel rail 20 mm dia \"D\" type 60 cm long between flange aluminium anodised complete as in repair all as specifed and directed. |
| 34 | S&F for 600x450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete as in repair all as specified and directed. |
| 35 | S&F for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed. |
| 36 | S&F for 15mm bore Stop valve (Angle valve), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed complete as in repair all as specified and directed. |
| 37 | S&F for 15mm Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete as in repair all as specified and directed. |
| 38 | S&F for viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete as in repair all as specified and directed. |
| 39 | S&F for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral \"foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete as in repair all as specified and directed. |
| 40 | S&F for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete as in repair all as specified and directed. |
| 41 | S&F for plastic water closet seat cover black/white colour close pattern with flat bottom and cover and mild steel chromium plated aluminum hinging device for pedestal pattern WC, complete as in repair all as specified and directed. |
| 42 | S&F for brass chromium plated nozzle jet sutiable for EWC with all fixing arrangement, complete as in repair all as specified and directed. |
| 43 | S&F for PVC(SWR) \"P\" trap 110 mm bore complete as in repair all as specified and directed. |
| 44 | S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed. |
| 45 | S&F in repair 110mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints, laid in trenches or in floor, or as in weep hole complete all as specified and directed. |
| 46 | S&F in repair 110 mm bore PVC (SWR) bend any radius,complete all as specifed and directed by Engr-in-Charge. |
| 47 | S&F in repair 75mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints, laid in trenches or in floor, or as in weep hole complete all as specified and directed. |
| 48 | S&F in repair 75 mm bore PVC (SWR) bend any radius,complete all as specifed and directed by Engr-in-Charge. |
| 49 | S&F in repair 110mm bore PVC (SWR) reducer complete all as specified and directed. |
| 50 | S&F in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 51 | S&F in repair 75mm bore PVC (SWR) pipes type \"B\" single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 52 | S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access of door complete all as specified and directed. |
| 53 | S&F in repair 100 mm dia grating stainless steel with waste hole complete all as specified and directed. |
| 54 | S&F in repair Vitreous china standing urinal including, waste pipe, coupling, floor trap, incuding necessary fitting complete as in reapir all as specified and directed by the Engineer-in-Charge. |
| 55 | S&F in repair vitreous China wash basin, white, flat back, size 550x 400mm including waste coupling waste pipe and brackests, complete all as specified and directed. |
| 56 | S&F for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete as in repair all as specified and directed. |
| 57 | S&F in repair 32mm bore high density polyethylene (HDPE) pipes ofpressure rating 6 kgf/sq. Cm complete all as specified and directed. |
| 58 | S&F in repair 32mm dia waste coupling of brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and bedded in red lead cement mortar complete all as specified and directed |
| 59 | M&L for precast cement concrete 1:2:4, type B-1 (20mm grade crushed stone aggreagte) as in landing, cover slab, manhole cover, chajjas etc and similar articles with plain faces set in cement mortar 1:4, complete all as specified and directed. |
| 60 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 61 | M&L forplain cement concrete type B-0 1:2:4 (using 12.5 graded crushed stone aggregate) as inhaunching and channels inside manholes, coping etc, complete all as specified and directed. |
| 62 | Dismantling of asbestos cement (corrugated, semi corrugated etc) sheeting in roof covering, complete all as specified and directed. |
| 63 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering, complete all as specified and directed. |
| 64 | S&F for Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mmthick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed. |
| 65 | S&F for Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mmthick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed. |
| 66 | S&F for steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 67 | S&F for factory made MS tubular Box type window (double rebate and double shutter) of MS rolled steelsection conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge, corner welded to form a solid fused welded joint, handles shall be of z section welded with openable frame box steel section used in outer frame, shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nosfriction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section of steel window to provide suitable arrangement of using tower bolt. Glazed, gauzedwindow , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specifiedwith all fittings and fixtures without glazing bars including 3mm thick sheet glass ordinary quality and stainless steel wire mesh of 0.56mm nominal dia and average width of aperture 1.18 mm etc complete all as specified and directed. |
| 68 | M&L forframed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290, Gde E-165 complete all as specified and directed. |
| 69 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 70 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. |
| 71 | Description all as per item No. 70 above but as in skirting / dado including 10cm thick backing coat in cement mortor 1:3. |
| 72 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. |
| 73 | M&L for glazedceramic coloured tiles of size 300x200x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over10mm thick plaster of cement mortar 1:3, complete all as specified and as directed. |
| 74 | M&L for vitrified colouredtiles light shade 600x600x10 mm thick as in floorsset and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 75 | S&F for 4mm thick designer ceiling boardin ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white.The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheetof size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modulescross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed. |
| 76 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming to Fe-290-W (Gde - E-165) quality A complete all as specified and directed. |
| 77 | Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed. |
| 78 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10cm in width or girth andapplying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 79 | M&L for preparation of new or previously untreated steel surfaces of any description, not execeeding 10cm in width or girth when unconnected with other painting or when painted in a different tint andapplying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 80 | S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded crushed stone agregate complete all as specified and directed. |
| 81 | S&F for pressed steel frame for doors with one or morerebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6 type C-0 using 12.5mm gradedcrushed stone agregate complete all as specified and directed. |
| 82 | S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 83 | S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specifiedin SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 84 | M&L for300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate, complete all as specified and directed. |
| 85 | M&L foraluminium anodized barrel tower bolts 150 mm long (ISI marked) of extruded section all as specified and directed. |
| 86 | M&L forextruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked) complete all as specified and directed. |
| 87 | S&F for 100mm long mild steel butt hinges medium weight cold rolled, fixed to PVC doors complete all as specified and directed. |
| 88 | M&L for 250mm long mild steelsliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate (ISI marked) complete all as specified and directed. |
| 89 | S& F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 90 | M&L forpreparation of newwooden surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 91 | S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n . exc 0.50 sqm in each panecomplete after hacking out old broken glass all as specified and directed. |
| 92 | Taking down aluminium door / window, partition of any description including all fitting and fixtures, complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F for anodised aluminium, power coated (minimum thickness of power coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 94 | S&F for anodised aluminium(minimum thickness of power coating 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 95 | S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 96 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to aluminium framework (fittings and fixtures are included in shutter item), complete all as specified and directed. |
| 97 | S&F in repair door closer hydraulically regulated, aluminium (extruded section body) designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg. Complete all as specified and directed. |
| 98 | S&F in repair 100 mm size mortice lock of brass, vertical type,4 levers, complete all as specified and directed. |
| 99 | M&L in repair 15mm dia gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes,completeall as specified and directed. |
| 100 | M&L in repair 20mm dia gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes,completeall as specified and directed. |
| 101 | S&F in repair push type tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals(minium weight 15mm-50 gms), complete all as specified and directed. |
| 102 | S&F in repair soap dish fixed with including chromium plated brass screws, complete all as specified and directed. |
| 103 | S&F for 3 mm thick frosted sheet glass oridinary quality and glazing with oil putty in squares n . exc 0.50 sqm in each panecomplete after hacking out old broken glass all as specified and directed. |
| 104 | M&L for preparation of old decorated surface of brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint on walls, pillars, cornices etc complete all as specified and directed. |
| 105 | M&L for preparation of old decorated surface of brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of oil emulsion distemper including one coat of wall care putty 1.5mm thick, complete all as specified and directed. |
| 106 | M&L for preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 107 | S&F in repair 15 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed completeall as specified and directed. |
| 108 | S&F in repair 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed completeall as specified and directed. |
| 109 | M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:4)of any size complete all as specified and directed. |
| 110 | S&F in repair PVC connection 15 mm dia withPTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 111 | Demolition of stone slabs / kota stone of any description of thickness in floor aprons etc, complete all as specified and directed. |
| 112 | S&F in repair brass cromium plated mixer for mixing hot and cold water for wash hand basin of 15mm dia screwed down for iron pipe, complete all as specified and directed. |
