Procurement Of Glinker Grinder Spares For U#3 , Assy.Of Ash Crusher ( Clinker Grinder ) U-3 Assy.Of Ash Crusher ( Clinker Grinder ) , Type: Single Roll Reversible, Speed: 17 Rpm ( Approximate ) , Max.Output Of Clinker : 25Mm, Speed Reduction Through Gearbox = 20:1, Speed Reduction Through Chain & Sprocket =2.8 :1 ( Approximate ) , Capacity: 105 Ton / Hr, Moc: As Per Drawing No: Btps-Eeahp2-Cg-01, Roll ( Cam Segments ) Aca, Bearing Support Aca, Lantern Ring Aca, Shaft Sleeve Aca, Feeder Ejector Assembly Feeder Ejector Complete Assembly For Aph / Eco Hoppers U#3, Dry Ash Capacity : 4.25 Ton / Hr, Water Quantity And Pressure-160 Cu.M / Hr And 7 Kg / Cm2, Testing As Per Approved Qap, Slurry Concentration : 21.37 %, Mco: Inlet Elbow-Durite Bhn-450, Cover Plate: M.S.Is:2062, Water Chamber:C.I-Fg 260, Bhn:180, Water Chamber Liner: Durite Bhn-450, Nozzle:Ss 410, Nozzle Insert: Ceramic Hardness 8 Moh, Tailpiece:Durite Bhn-450, Hand Hole Cover For Tail Piece: Durite Bhn 350, With Required Necessary Fastners, Note: Agency Has Supplied As Per Dcips Drawing No: 11P01-1B-T-443. Make: Globus / Umhs / Dcips / Equivalent., Inlet Elbow For Feeder Ejector, Tail Piece For Feeder Ejector, Feed Sump For Ba Hopper Ahp U3, Ss Anchor Bolts And Nuts, Liner For Feed Sump Unit-3, Jet Pulsion Pump Complete Assembly Jet Pulsion Pump Complete Assembly For Ahp U#3, Tech Specification, Capacity:85Tph, Moc, 1 ) Throat Cum Discharge Pipe- 24% Chromium Ci ( Harness Min 550Bhn ) Part No: 1. 2 ) Nozzle Tip: Ceramic Lined Ss / Tungsten Carbide With Hardness Of Min 500Bhn, 3 ) Nozzle Inlet: F.G 260, Is:210, 4 ) Gasket: Rubber Asbestos, 5 ) Body: 24% Chromium Ci ( Harness Min 550Bhn ) Part No:9. 6 ) Aliging Ring: Steel , 7 ) Nozzle Inert: Ceramic Hardness 8Moh, 8 ) Flange Clamp Half: Steel, 8 ) Counter Flange: Ms As Per Is:2062, Note: Test Pressure Of Nozzle Inlet-15Kg / Cm2 And Throat Cum Discharge Pipe- 8Kg / Cm2, Drawing No: Btps-Eeahp2-Jp-01, Make: Dcips / Umhs / Br Enterprises / Equivalent., Slurry Sump Plug Gate Assy, Lead Screw For Sspg Lead Screw For Slurry Sump Plug Gate Assembly Make:Dc Industrial Plant Services Pvt Ltd Part No.:2 Material:Ms, Is:2062 Qty:1 Drawing:11P01-1B-T-170 Location:Common Trough, Nut Hoisting For Sspg Nut Hoisting For Slurry Sump Plug Gate Assembly Make:Dc Industrial Plant Services Pvt Ltd Part No.:3 Material:Ms, Is:2062 Qty:1 Drawing:11P01-1B-T-170 Location:Common Trough, Indicating Rod For Feed Gate, Flexible Hose Pipe Fca Ahp U#3, Sleeve For Heating Elements, 100Nb Flanges For Ahp#3 100Nb Flanges For Ahp#3, Flange Dimension And Drilling Data ( Ansi B16.5 Class150 ) , Pcd: 7-1 / 2, Number Of Holes:8, M ( Unc ) :5 / 8, Make: Reputed Make., 150Nb Flanges For Ahp#3 150Nb Flanges For Ahp#3, Flange Dimension And Drilling Data ( Ansi B16.5 Class150, Flate Face ) , Flange Dimension: Dia-279.5, Thickness: 25.4, Pcd: 241.3, No Of Holes: 8, Hole Dia:22.2, Make: Reputed Make., 80Nb Flanges For Ahp#3 80Nb Flanges For Ahp#3, Flange Dimension And Drilling Data ( Ansi B16.5 Class150, Flate Face ) , Flange Dimension: Dia - 190.5, Thickness:19, Pcd:152.4, No Of Holes:4, Hole Dia:19, Make: Reputed Make.
