Procurement Of Interior Furniture And Other Allied Items As Per Requirement For Uphc Under Nkda Near Business Club. Procurem Ent Of Interior Furniture And Other Allied Items As Per Requirement For Uphc Under Nkda Near Business Club. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Flip Tbl Pu 1200W_600D Ral Wh As Per Following Specification. Table Top: Table Top Is Made Of 25Mm Thk .Mdf Osr .Osr Board ( Bottom Side In White-Collar ) As Per Is: 12406 Which Is Having Two Finish Options. Option I: Pu Coated On Top Side With The Colour Options As Per Colour Chart. Under Structure -Legs Are Made By Welding The Combination Of M.S.E.R W. Round Tube 63.5X2mmthk Of Is: 7138, Flanges Made Of Crca Sheet. Of 1.6Mm Thk And 1.2Mm Thk ) Of Is513.Inside Plates Made Of Hr 5Mm Thk Sheet ( Is:2062 ) . Assembly In Epoxy Polyester Powder Coated ( Min40micron ) . Table Top Folds Upside At Offset Centre Pivot Provide On Support Bracket Which Is Aluminium Alloy ( Adc12 ) Pressure Die Cast Coated With Epoxy Polyester Powder Coated ( Min 40 Micron ) Table Top Connected With Spring Loaded Mechanism With Full Handle Made Of Sandwich Tubes Of M.S.E.R.W. 16*1.2Mm Thk. And 12.7*1.6Mm Thk. Tube Of Is7138.Coated With Epoxy Polyester Powder Coated ( Min40micron ) .To Operate Table Top Legs Are Provided With Casters Of 65Mm Lockable Type For Ease Of Movement And Can Be Locked When Required At Any Positions. As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Cross Chair With Headrest As Per Following Specification. . Seat / Back Assembly: The Seat Is Made Up Of 1.2 + 01Cm Thk Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18 The Back Is Made Up Of Injection Moulded Glass Filled Nylon & Upholstered Using Micro Mesh Fabric With High Tenacityyarn With 28 Density Foam Sandwich In Lumbar Area. Seat Size ( Larger Seat Depth ) : 47.0 Cm. ( W ) X 51.5 Cm ( D ) . Back Size : 45.0 Cm. ” ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam The Hr Poly Methane Seat Foam Is Moulded With Density 45+ / -2 Kg / M And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression. Armrests : The Adjustable Armrest Is Designed With The Foliowingfeatures. Up-Down Adjustment— 8 Steps ( 8.0+0.Scm Range ) . Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. Fixed Armrest Top Is Pu Moulded Over Metal Insert. Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad Lumbar Pad Has An Adjustment Of 8 0 + 0.5 Cm In Height.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. 360° Revolving Type. Single Point Control. Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. Tilt Tension Adjustment. 4-Position Locking With Anti Shock Feature. Seat / Back Tilting Ratio Of 1:2. Neckrest . The Neckrest Assembly Consist Of Polypropylène Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. Neckrest Is Fixed To Back Assembly Through Neckrest Connector. Neckrest Assembly Has Height Adjustment Of 4.2 + 0 5 Cm And Rotation Adjustment Of Overall 76”+ 2 . The Complète Neckrest Assembly Is Retro Ut To The Main Chair. Pneumatic Heigmt Adjustmentt: Tne Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0+-0.3 Cm. Pedestal Assembly: The Pedestal Is Injection Moulded In Black 3G% Glass-Filled Nylons And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Is 66.1 + 0.5 Cm ( 76.1 + 1.0 Cm. With Castors ) . Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Height Adjustable Ss Top Round Stool As Per Following Specification. Overall Dimension: Overall Sizes Diagonal Legdia 538 Mmh470 Min-655Max Top Plate Should Made Of Ss 202 Made Sheet With Spin Section Of Thickness 1Mm & Should Be Non Corrosive. It Should Have A Diameter Of 305Mm, Seat Base Should Made Of Ms Ring And Rectangular Tube. En8 Screw Having Dia Of 22 Mm Should Be Used For Height Adjustment Of The Seat Base. The Round Hub Should Be Made Of Ms Erw Tube Having Dia Of 38Mm And Thickness 2 Mm.The Hub Should Be Welded With The Legs And It Should Accommodate And Cover The Lead Screw Mechanism.The Understructure Should Consist Of 4 Legs Made Up Ofms Erw Tube Of Diameter 25.4 Mm And 1.6Mm Thick. The Press Formed Pipe Leg Should Give A Round & Clean Look. All The Legs Should Be Provided With 4 Nos Of Nylon-6 Bush. All Metal Componentsshould Be Pre Treated With Zinc Phosphating In 9 Tank Porcess And Then Powder Coated With Anti Microbialepoxy Polyster Powder Coatingto Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [ Gram Positive And Gram Negative ] . Safe Working Load Must Be 135Kg As Per Direction Of Engineer In Charge , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Examination Table On Ratchet With No Storage As Per Following Specification. Overall Dimension Of L 1835 Xw600 H 850 Mm. The Backrest Should Have Ratchet Mechanism For Tilting The Backrest. Leg Frames & Intermediate Frames Should Be Made Of Erw Tubes Having Section Of 30 X 30 Square Tubes With Thickness Of 1.6Mm. Nylon 6 Leg Shoes Should Be Given To Avoid Wear & Tear. Ms Sheet Metal Lying Surface Of Thickness 1.2Mm Should Be Used. Top Sheet Metal Panel Base Frame Of 25 X 25 Erw Square Tubes Of Thickness 1.6Mm Should Be Used. Ratchet Should Be Made Of Ms Strip With Section 40 X 4 To Provide The Backrest Tilt. Anti Microbial Thermosetting Epoxy Powder Coating Should Be Used To Fulfill The Requirements Of Bacterial Protection. All Ms Part Should Be Powder Coated With Ral White Color & All Plastic Parts In Grey. Safe Working Load Must Be 135Kg As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Examination Table On Ratchet Mattress 30 Mm As Per Following Specification.Providing And Supplying Examination Table On Ratchet Mattress 30 Mm The Bed Should Be Provided With 40 Density 30Mm Thick Pu Foam Mattress Which Should Be Covered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable. The Zip & Stiches For The Mattress Cover Should Be Concealed. The Mattress Foam And Cover To Be Divided In 2 Sectionsthe Manufacturer Should Compilant With Iso 9001, 14001, 13485 & Ohsas 1800 And Ce Certification.The Work Shall Be Carried As Per The Instructions Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Double Foot Step As Per Following Specification. Overall Dimension Should Be 665 Mm ( L ) X 485 Mm ( W ) X 393 Mm ( H ) . Understructure Frame Should Be Made Of 19 Mm X 19 Mm And 1.2 Mm Thick Vertical Tubes. The Stool Top Should Be Made Of 1.2 Mm Thick . The Step Top Should Have 3.2 Mm Thick Rubber Sheet To Have Better Grip. Load Bearing Capacity Should E 135 Kg. All Tehmetal Parts Are Pre Treated And Powder Coated With Epoxy Polyester Powder Coating As Per Direction Of Engineer In Charge. , Supply, Installation And Placement Of Mac Curtain Track Ivory ( Japan ) With D-Décor Curtain Editors Choice Warm Hues 669 Supply And Installation Of Track Curtain Manual With 50% Blackout Linning For French Window With Brackets And Necessary Fittings: Curtain Made With Sophisticated High Quality Designer Approved Fabrics Of Skipper With High Quality Stitching & Imported Quality Tape With Four Side Stitching, Without Out Linning , Min Six Inch At Bottom, One Inch At Two Sides And Three Pleated Style Stitching With Stiff Good Quality Buckram Of Min. Four Inch Which Will Be Covered With Above Fabric At Upper Portion Of The Curtain, The Skipper Curtain Tape Will Be Stitched At The Back Side At Desired / Required Position And High Quality Of Pvc S Clip Along With Designer Belt Etc. The Curtain Will Be Hanging From 28 Mm Dia , 1.6 Mm Thick Corrugated Aluminiumwith Special Finished Powder Coated Coloured Section , Modular Machine Finished Ethnic Look Pvc Finials. Curtain Stitch Make Skipper Furnishing Or Equivalant As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Matrix 3 Str , Comm Arm With Cushion As Per Following Specification. The Seat Shell Should Bea Welded Assembly Of Seat, Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ) . The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm ( W ) X 44.6 Cm ( D ) * Back Size : 41.6 Cm ( W ) X 23.0 Cm ( H ) Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ) .The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ) . Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. The Cushions For Seat And Back Should Bemade Up Of 1.5 ± 0.1 Cm Thk Foam On A Flat Mr Grade Ply 0.8±0.04Cm Thk And Should Beupholstered With Leatherite. Overall Dimensions Of Chair: Seat Height - 44.1 Cm, Height - 78.5 Cm, Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Vsdu-8 As Per Following Specification. Overall Dimensions Of Vsdu - 8 Shall Be 900Mm ( W ) X450mm ( D ) X 1830Mm ( H ) . The Top Shall Be Metal Top ( 1 Mm Add In Unit Height ) .The Rigid Knock Down Construction , Back , Sides And Door Shall Be Made From 0.7 Mm High Yield Strength Crca , Rest In 0.8 Mm Crca . Crca - D Grade As Per Is-513 . Sliding Door Arrangement Shall Have Sliding Door Wth Top Hanging Arrangement To Prevent Derailment . Each Door Shall Be Provided With 2 Plastic Roller Having Steel Ball Bearing For Smooth Movement Of Door & Less Noise .Vsdu 8 Shall Have Glass Door For Visibility Of The Content . Locking Shall Be 5 Lever Cam Lock For Safe Locking . Handle Shall Be Plastic Flush & Recessed Handle . Shelving Shall Have Height Wise Adjustable Shelf Mounting . Uniformly Distributed Load Capacity Of The Shelf Is 40 Kg Maximum . Vsdu - 8Shall Have 4 No. Of Adjustable Full Shelves . Accessories Optional Shall Be Cradle With Pipes For Hanging Godrej Instadex Files . Leveler Shall Be Screw Type Leveler With Hex Plastic Base And Overall Finish Shall Be Epoxy Polyester Coated To The Thickness Of 50 Microns . For Vsdu 8 - A4 Size Box File Can Be Stored Vertically On Four Shelves And Clear Space Above Fifth Shelf Is 220 Mm As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Wallside Lab Table With Electrical Trunking, Wash Besin, Understorage & Overhead Storage Unitas Per Following Specification.D-Frame System: All D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 ( Indian Standard Specification For Steel Tubes For Furniture ) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout. D-Frame Should Be Constructed From A Square Pipe With A Cross Section Of 30Mm X 30Mm And Should Be A Minimum 1.6 Mm Thick. The D-Frame Legs Should Be Supplied With Adjustable Levelling Screw ( M-10 Levelers Of Nylon + Ms, Tolerance From -5Mm To +15Mm ) To Correct The Unevenness Of Flooring. The Tubular Enclosed Type Construction Shall Discourage Dust Accumulation And Unwanted Development Of Bacteria & Fungus. Drainage Gradient Should Be Well Adjusted Throughout The Length Of Table And Should Have Horizontal Supports For Drainage Systems.It Should Be Suitable For Sitting And Standing Nominal Heights Of 750Mm & 900Mm Respectively. The Nominal Table Depths Should Be 450Mm, 600Mm, 750 Mm For Wall Side And 1050Mm, 1200Mm, 1500Mm For Island Tables. The Corner Units Shall Fit Well With 750Mm & 900Mm Table Depths. All Frame-Work Is Should Be Pre-Treated With Superior Pure Epoxy Powder Coated Finish. The D-Frames Structure Should Be For Suspended Storage Cabinets. Horizontal Members: These Should Be Made From Square Pipes Of 1.6 Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30 X 30Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two D-Frames Together As Shown Using C-Clamps / U-Clamps. Together With The D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Workbench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member ( Distance ) Between Two Adjacent D-Frames. Cover Panels: All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating. Welded Under-Bench Storage Cabinets: Under Bench Cabinets Are To Be Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Should Be Suspended From Tubular Structure. The Cabinet Should , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Enterprise 1200 As Per Following Specification. Enterprise 1200 Table Without Cpu Hanger Size Shall Be1200width Mmx 600Depth Mmx 728 Height Mm. Top Shall Be18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat ( Epoxy Polyster ) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube , Finish Powder Coat ( Epoxy Polyster ) .The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus The Drawer Front Shall Be 0.8Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) As Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Slotted Angle Rack As Per Following Specification.Slotted Angle Rack - Providing & Supplying Of Slotted Angle Racking Systems Are The Most Versatile Of All Storage Systems Commerci -Ally Available. The Flexibility Offered By This Type Of Storage System Is Unparallel And Can Meet A Wide Variety Of Storage Requirements. Slotted Angle Systems Can Be Custom Assembled For Any Storage Requirement And Can Be Dismantled In No Time For Reassembly Somewhere Else. The Scalability Of The System Is Very High That A Two Tier Or Even Three Tire Systems Can Be Made Out Of This Basic Components. Any Typical Slotted Angle Racking System Consists Of The Following Components. A ) Angles B ) Panels C ) Corner Plates D ) Fasteners ( Nuts & Bolts ) 1. Angles :Material Specifications Of Angles & Straps Are Is: 5986 ( St 42 ) . The Length Of The Angles Shall Correspond To The Height Of The Rack. Overall Unit Dimension Of 1800H X 450D X 900W, The Thickness Of The Angles When Made From Sheet Steel Are Not Less Than 1.6 Mm. Angles Are Of Rolled Formed Construction To Ensure Minimal Residual Stresses And Accuracy Throughout The Length Of The Angles. The Angles Are Free From Twist, Sharp Edges And Burrs.Angles Are Provided With Holes At A Pitch Of 19.05 Mm. The Holes Starts From 19 Mm Center From Each Edge.Straps Are Used For Stability Of The Racks And The System. They Are Provided As Required By The Design Of The System. Sheets Not Less Than 1.0 Mm In Thickness As The Application Warrants. Panels Are Provided With Lipped Flanges. Width Of The Flange Being 31 Mm And Depth Of Lip 17 Mm. Panels Are Provided With 9 Mm Holes On The Flange For Corner Plates, Cladding Sheets And For Fitting To The Angles. 3. Corner Plates ( Gussets ) :Material Specifications Of Corner Plates Are Is : 513 D. Adequate Numbers Of Corner Plates Are Fitted To The Rack To Impart Stability To The System. Corner Plates Are Made Of 1.60 Mm Thick Mild Steel Sheet And Provided With Black Powder Coated Finish. 4. Nuts & Bolts : All Fasteners Like Nuts, Bolts, Clips Etc. Are Supplied In Galvanised Condition For Protection Against Environment And Corrosion 5. Design Of Components :The Components Are Designed With A Minimum Factor Of Safety Of 1.67 With Respect To Yield Stress Inaccordance With Is : 800 & Is : 801. 6. Pre-Treatment : All Components Of The System Are Supplied Duly Finished With Epoxy-Polyester Powder Coating After Doing The Surface Treatment Of All The Items By Using Pre-Treatment Method As Mentioned Below. 6.1. Pre-Treatment : All Of The Above Mentioned Processes Are Interspersed With Rinsing With Water Of Appropriate Temperature. 6.2. Degreasing : Degreasing Is Carried Out With The Help Of A Two Step Chemical Process Within Controlled Temperatures. 6.3. The Degreasing Conform To The Requirements Of Is : 3194 / 6005 – 1980.6.4. Phospha- Ting : Phosphating Is Carried Out By Using Nipaphose 3456 Additives Within A Controlled Temperature. This Process Is Carried Out As Per Is : 6005 And Is : 3618 Class D.6.5. After Phosphating, Cold Water Rinse Is Done Using Two Different Tanks And One Final Rinse Is Done With De-Mineralised Water To Remove All Traces Of Retained Chemicals. 6.6. Dry Off Oven Treatment :The Material Will Be Dried Up Using Drying Oven At An Air Temperature Of 125 Deg C. 7. Final Finish :7.1. Epoxy Polyester Powder Coating Of Approved Colour And Shade Is Applied To All Components With An Average Dry Film Thickness Not Less Than 35 Microns.7.2. The Material Components Are Oven Baked Within A Controlled Temperature As Specified By Powder Manufacturer For A Flawless Finish.7.3. The Finish Is As Stronger As To Withstand A 2H Pencil Hardness Test As Per Direction Of Engineer In Charge. , Supply & Installation Of280 Ltr Frost Free Double Door Refrigerator, Rt Eon Vibe 306B 25 Hcf Sk Pr Or Equivalent With Auto Defrost, Energy Rating: 2 Star, Inverter Compressor: Energy Efficient, Toughened Glass Shelves: Can Bear The Weight Up To 120 Kgthickest Puf Insulation: Ensure Cooling Retention, Cool Shower Technology: In-Built Air Vents, Enable 360-Degree Superior Cooling, Aroma Lock: Retains 24-Hour Freshness, Gasket Type: Anti-Bacterial Technology, Removable, Silver Ions In The Air Duct And Anti Microbial Resistanceas Per Direction Of Engineer In Charge. , Supply , Fitting & Fixing Ofiso 9001:2015, Iso 14001, Ohsas 18000, Bifma, Aiota, Greenguard Certified Manufacturer Godrej Make Storwel Plain Almirah As Per Following Specification.Storwel Plain Shall Have An Overall Size Of916mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available As Per Direction Of Engineer In Charge.
