Renovation / Improvement Of E And M Equipment At Recently Reconstructed Joharipur Online Bps. - Supply of LT Distribution 4 panel board for operating 2 nos. 10-15 HP mo no-block pump sets and one dewatering pump set and other electrical systemat joharipur online BPS. Make of steel sheet enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust & vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection. The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment of the panel will be as per standard given in relevant IS. The bus bar shall be Aluminum rectangular cross section size 20 mm x5 mm strip per phase, rating 100 Amp. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, The panel will have MS angle stand in 50x50x5mm size and size of panel 1800mm(L) x1250MM(W)x300mm(D). Having following components of approved make. MCCB 100Amp. 415V, 30KA, 50Hz TPN of High breaking capacity-1No. MCCB 63Amp. 415V,18-20KA 50Hz TPN of High breaking capacity, 2Nos., Power contactor 220V 32Amp. (with aux contact block) -6 Nos,star delta timer -2No.,Tape insulated current transformer 100/5-3 Nos. Motor protection relay (over voltage/under current/earth fault/ dry run/ single phase preventer) 15-24Amp. -2No, Thermal overload protection relay 15-24 Amp. -2 Nos Capacitor 5 KVAR-2No., Indicating lights RYB(ON/TRIP/OFF)-11 Nos., on-off push button 06 Nos. Amp. Meter (digital) 0-50A size96x96mm-4no., Volt meter (digital) 0-500v size 96x96mm-1No, MCB SP 32Amp. -6Nos. MCB Triple Pole with neutral 63Amp. -5Nos. Amp. & volt meter selector switches-4set, terminal block 6 way -2 no., Change over switch 100 amp- 1 no. Make of accessories: - All MCCB/MCB/contactor/timer/Relay/Lights/push button: - L&T/Siemens/Havells.Amp/Volt meter/current transformer: -AE/L&T/Havells. 2 Supply of open well submersible pump set 3 HP, 3 Phase, 415V, discharge 300-600 LPM at 16-24 mtr head suitable for clear water application. Make:-Kirloskar /M&P/lubi /CROMPTON/DJB approved make. 3 Providing and laying in position reinforced cement concrete 1:2:4 (1Cement: 2 Coarse: 4 graded stone aggregate 20 mm nominal size) in foundation of pumps and also making arrangement for fixing of pump as per requirement. 4 Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 100 mm Make: - Kirloskar/IVC/ DJB approved make 5 Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 100 mm. Make: - Kirloskar/IVC/ DJB approved make 6 Supply and laying of 50 mm dia. MS pipe medium B class for Charging/Vacuum set and cable protection. (Payment will be made as per Actual) I.S.I Mark 7 Pressure Gauge of 100mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:-Hguru/fibeg/DJB approved make. 8 Providing/fixing of water storage tank of capacity 500 Litre at Sonia Vihar BPS with pipe fittings and All 20mm nipple - 4 nos, tank nipple - 1 no, pipe -10 mtr, elbow-4nos, Tee- 2 nos, socket- 5 nos, Reducer socket ¾ to ½ - 2 nos. Union- 2nos and gun metal gate valves-2 nos, with the help of manual labour, tool & tackles. at joharipur BPS and office useMake -water storage tank: -Sheetal/ Supreme/Aquapure/Any DJ B approved. Make - pipe fittings: - ISI mark. 9 0.5 Hp Self Priming Water Pump Pipe size (mm x mm): 25 x 25, hp: 0.50, kw: 0.37, rpm (syn): 3000, head range (metres): 6-21, discharge range (lpm): 1950-450, Fitted with thermal overload protector, Brass impeller, Aluminium pressure die cast / aluminium extruded motor body. For joharipur BPS and office use Make: Crompton/ Kirloskar/Havells 10 Supply of Nut- Bolt with washer of good quality size as per requirement. ISI Mark. (Payment will be made as per Actual). 11 Supply of rubber packing sheet with 50 % Neoprene (1.5 mm to 25 mm) ISI Mark. (Payment will be made as per Actual). SOR (E&M) item code 22.6.1 12 Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3.5 core 35 mm2. Make: - Grandley/ Gloster/ Havells/ finolex. 13 Supply of LT Power Copper cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3 core 6 mm2. Make: - Grandley/ Gloster/ Havells/ finolex. 14 Main switch 100Amp. 3 pole, Sheet steel Close execution type with Kit kat Fuse. Make: L&T/ Havells 15 36W LED fixture with LED lamp, basic all-purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. SOR (E&M) item code 19.3.3 Make: - Havells, Philips,crompton 16 Supply of 45W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. SOR (E&M) item code 19.10.5 Make: -Havells/ Bajaj/Crompton/ Phillips. 17 Supply of heavy-duty exhaust fan having size 450 mm (18), 900 R.P.M. in grey colour of single phase 230 volts. SOR (E&M) item code 20.2.3 Make: - Almonard /Havells/ Bajaj. 18 Supply of ceiling fan of 1200mm sweep area of brown colour. SOR (E&M) item code 20.1.2 Make: - Orient/ Havells/ Any DJB approved make. 19 Supply of Insulating mats for electricial purpose confirming to IS 1562/2000 of followingsig size (1mX2mX3mm). SOR (E&M) item code 22.5.3 Make: -Jyoti/National 20 Supplying and fixing 32 A rating, 240/415 V, 10 kA, C curve, single pole miniature circuit breaker. Make L&T/Siemens/ Havells 21 Supplying and fixing 32 A rating, 240/415 V, 10 kA, C curve, Double pole miniature circuit breaker. Make L&T/Siemens/ Havells 22 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (D.S.R 2018 E&M Code No1.8.3)Group C 23 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2X2.5 sq.mm (D.S.R 2018 E&M Code No -1.17.11) (Payment will be made as per Actual) 24 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm (D.S.R 2018 E&M Code No -1.21.1) 25 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/ RCCB/ Isolator) 06-way, Double door (D.S.R 2018 E&M Code No -2.3.1) 26 I/T/C of ceiling fan, including wiring the down roads of standard length with 1.5 mm FR PVC insulated copper conductor, single core cable etc. as req. DSR-2018 E&M Code: -1.44 27 Installation of exhaust fan in the existing opening, including making goods the damage, connection, testing, commissioning etc. as required. DSR 2018 E&M, Code No.1.50.1 28 Supply and fixing if 32mm dia. 02 Mtr. long G.I pipe (medium class) bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole/ wall including bending the pipe to the required shape, 2 Nos. 40mmX 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR-2018, Item code- 12.34 29 Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as required. DSR 2018 item code 1.41 30 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. DSR (E&M) 2018 Item No 5.4 31 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. (DSR E&M 2018 item no. 5.11) (Payment will be made as per Actual) 32 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. DSR (E&M) 2018 Item No 5.15 (Payment will be made as per Actual) 33 Installation, erecting, testing, and commissioning of the above said equipments/ accessories with all sundry equipments, fittings, assemblies, accessories, hardware items, bolts, supports, termination lugs for electrical connections, cable glands, junction boxes, and other items for proper assembly and installation of the various equipments and components of the work shall be deemed to have been included. The work also includes necessary required items for completion of work i.e. flanges, MS bends, MS Pipe, eccentric tapers, rubber gaskets, foundation bolts, construction of thrust block, necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement, loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.
