|
| 1 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil as directed. |
| 2 | Earth work in excavation by manual means over areas exceeding 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excavated earth upto 1 m, disposed earth to be levelled & neatly dressed( all kinds of soils) |
| 3 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). (Including all carraige lead and lift if any) |
| 4 | Providing/laying in position specified grade excluding the cost of centering & shuttering – All work upto plinth level.(M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.)(Including all carraige lead and lift if any) |
| 5 | providing/laying in position specified grade excluding the cost of centering & shuttering – All work upto plinth level.1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregates. (Including all carraige lead and lift if any) with 20% boulders |
| 6 | Reinforcement cement concrete work in beams ,suspended floors ,roofs having slops 1.5landings ,balconies ,shelves,chejjalintal bands plain window sills above plinth level (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) excluding cost of centering shuttering complete job. (Including all carraige lead and lift if any) |
| 7 | Reinforcement for cement concrete works including straightening cutting bending placing in position and binding all complete. (Including all carraige lead and lift if any) |
| 8 | Centering /Shuttering for concrete works including strutting proping and removal of same. Foundation |
| 9 | Providing form work for slab base, beams and lintel band including strutting, propping and removal of form. |
| 10 | Brick work with FPS bricks of class designation 75 in super structures in 1:6 mix. Including Extra costfor brick work in superstructure above plinth level upto floor V level. (By manual means)Including all carriages and Costs all complete job. (Including all carraige lead and lift if any) |
| 11 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 12 | Providing 40x4 mm flat iron hold fast 40 Cm long includingfixing to frame with 10mm diameter bolts, nuts andwooden plugs and embeddings in cement mortar |
| 13 | 15mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) (Including all carraige lead and lift if any) |
| 14 | 12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) (Including all carraige lead and lift if any) |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood |
| 16 | Providing and fixing of 35mm thickwire guage shutters for windows and doors including cost of MS butt hinges and screws all complete job. |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 18 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 19 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 20 | Providing and Fixing of ridges hips / valleys 60cm vide of colour G.I sheets including cost screws/washers all complete job. |
| 21 | Providing and fixing hard board sheet ceiling of approved quality withnecessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6 mm thick |
| 22 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 23 | Finishing walls with water proofing cement paint( Excel) of required shade New work (two or more coats) [email protected] kg/1 Osqm |
| 24 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 25 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 26 | Paintingon wood workwith synthetic enamel paint two or more coats of approved brand and manufacture to give an even shade. |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. completeSize of tile 600x600 mm |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete |
| 29 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings /Fixed to steel windows by welding |
| 30 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete250x16 mm |
| 31 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10mm |
| 32 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 33 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 34 | Providing and fixing aluminum hanging floor door stopper, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparentor dyed to required colour or shade with necessary screws etc. complete :Single rubber stopper |
| 35 | Providing and fixing bright finished brass hard drawn hooks and eyes 100mm |
| 36 | Making plinth protection50 mm thick of cement concrete 1:3:6with 20 mm nominal size aggrigates over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated & grouted with the fine sand i/c finishing the top smooth (Including all carraige lead and lift if any) |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required. |
| 38 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requiredWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete |
| 40 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 42 | Providing and fixing C.P. brass angle valve for basin mixerand gyser points of approved make conforming to IS : 8931 (15 mm nominal bore) |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass bibcock ofapproved quality conforming to IS : 8931 |
| 44 | Providing and fixing G.I pipe complete with G.I fitting |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) |
| 46 | providing and fixing collar 100 mm sand cast iron S&S pipes as per IS:1730 |
| 47 | Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge. |
| 48 | Carriage of Sand by mechanical transport including loading , unloading & stacking complete lead upto 195km & manual labour 200 mtr |
| 49 | Carriage ofstone aggregate below 40 mm thick by mechanical transport including loading, unloading & stacking complete lead upto 60 km& manual labour 200 mtr |
| 50 | Carriage ofbricksby mechanical transport including loading, unloading & stacking complete lead upto 195km & manual labour 200 mtr |
| 51 | Carriage ofcement by manual labour including loading, unloading & stacking complete lead upto 200 mtr |
