Tender For Miscellaneous Civil Works For Esa Compliance At Manali Refinery Of Cpcl , Earth Work In Excavationinall Types Of Soil , Includingsoft Or Hard Murrum, But Excluding Soft And Hard Rock, Using Mechanical Means ( Hydraulic Excavators ) / Manually For Depth Upto 1.5M, Including Cutting And Dressing Of Sides In Slopes, Levelling, Grading And Ramming Of Bottoms, And Stacking Of Excavated Material Within A Lead Of 100M, Including Providing Temporary Supports To Existing Facilities Viz., Service Lineslikewater Pipes, Electric Under Ground Cablesetc. All Complete As Per The Specifications And Directions Of Engineer-In-Charge. , Same As Item No: 10 Above, But For Depth Beyond 1.5M And Upto 3.0M. , Backfilling After Execution Of The Work To The Proper Grade And Level With Selected Approved Available Excavated Soil Fromsoil Heaps Within A Lead Of 100M, Including Re-Excavating The Deposited Soil Excavated Earlier, Breaking Clods, Laying At All Depths And Heights In Layers Of Thickness Not Exceeding 150 Mm, Watering, Rolling And Ramming By Manual Methods / Mechanical Compactors, Dressing, Trimming Etc. In Foundations, Plinths, Etc.All Complete As Per Directions Of Engineer-In-Charge. , Excavating Trial Pits Manually Of Required Size & Depth Upto 3M At Locations As Specified With Necessary Shoring, Dewatering & Backfillingas Required, Etc. Complete As Per Specifications And As Directed By Engineer In Charge. , Transporting & Disposing The Surplus Earth & Debris Including Shrubs And Vegetations From Construction Area ( Beyond The Initial Lead Of 100M ) Todesignated Areas Within The Refinery Premises Up To A Lead Of 3Kmincluding Re-Excavating The Deposited Soil Excavated Earlier, Transportation, Loading, Unloading, Laying At All Depths & Heights, Stacking, Levelling And Dressing Both Areas ( Viz., From Where The Earth Is Transported And Where It Is Deposited ) To Required Levels And Slopes Complete With All Lifts As Directedby Engineer In Charge. ( Note: If Measured By Stacks 30%Voids Will Be Deducted. ) , Transporting & Disposing The Surplus Earth & Debris Including Shrubs And Vegetations From Construction Area ( Beyond The Initial Lead Of 100M ) To The Designated Area Outside The Refinery Premises Up To A Lead Of 7Km ( Vaikkadu Village ) Including Re-Excavating The Deposited Soil Excavated Earlier, Transportation, Loading, Unloading, Laying At All Depths & Heights, Stacking, Levelling And Dressing Both Areas ( Viz., From Where The Earth Is Transported And Where It Is Deposited ) To Required Levels And Slopes Complete With All Lifts As Directedby Engineer In Charge. ( Note: If Measured By Stacks 30%Voids Will Be Deducted. ) , Supplying And Filling M Sand Of Specified Quality Underfootings, Pedestal Etc. For All Depthsincluding The Cost Of Sand, Labour Charges, Tools And Tackles, Royalties, Transportation To Site For All Leads And Lifts, Including Loading, Unloading, Spreading In Layersnot Exceeding 150 Mm, Watering, Ramming, Compacting With Mechanical Compactors And / Or Other Equipment To Specified Levelall Complete As Perspecifications And Directions Of Engineer-In-Charge. , Supplying And Filling Approved Quarry Dust Of Specified Quality Under Floors, Plinths, Etc. For All Depthsincluding The Cost Of Quarry Dust, Labour Charges, Tools And Tackles, Royalties, Transportation To Site For All Leads And Lifts, Including Loading, Unloading, Spreading In Layer Not Exceeding 150 Mm, Watering, Ramming, Compacting With Mechanical Compactors To Specified Levelall Complete As Perspecifications And Directions Of Engineer-In-Charge. , Providing And Laying In Position Plain Cement Concrete ( Pcc ) 1:4:8 With 40Mm & Down Size Graded Aggregate For Levelling Course / Fill Under Footings, Pedestal Etc., For All Depthsincluding All Tools And Tackles, Labour And Material Charges, Curing, Compacting, In Any Shape, Level, Thickness, Position And Finishing The Surface Smooth / Rough Etc., Complete As Directed By Engineer-In-Charge. , Providing&Laying Dry Rubble Soling ( Hard Core ) With 20 To 40 Mm Size Metal, Under Foundations / Ground Floor Slab ( Grade Slab ) Etc., Including Filling Recesses By Grit, Stone Chips & Approved Murrum, Watering, Dressing, Compacting With Mechanical Compactors Etc., Complete As Per Drawings, Specifications And As Per Thedirections Of Engineer-In-Charge. , Providing, Mixing And Laying In Position Rcc 1:1.5:3 With 20Mm And Down Graded Coarse Aggregates As Per Is 456:2000 With A Minimum Cement Content Of 400Kg / Cu.M.Using 53 Grade Ordinary Portland Cement In Sub-Structure For All Depths Upto Ffl Level Including Cost Of Admixtures If Used, Labour Charges, Tools And Tackles, Providing Pockets, Openings, Recesses, Chamfering Etc., Wherever Required, Vibrating, Tamping, Curing And Rendering If Required To Give A Smooth & Even Surface And Providing Neat Cement Wash Etc., ( Excluding The Cost Ofreinforcement And Shuttering ) , Etc. All Complete As Specified And Directed By Engineer-In-Charge. , Providing, Mixing Andlaying In Position Rcc1:1.5:3 With 20Mm And Down Graded Coarse Aggregates As Per Is 456:2000 With A Minimum Cement Content Of 400Kg / Cu.M. Using 53 Grade Ordinary Portland Cement In Super-Structure For All Heightsabove Ffl Level Including Cost Of Admixtures, Labour Charges, Tools And Tackles, Providing Pockets, Openings, Recesses, Chamfering, Wherever Requried, Vibrating, Tamping, Curing And Rendering If Required To Give A Smooth & Even Surface, Providing Neat Cement Wash, Etc. ( Excluding The Cost Of Reinforcement, Shuttering ) , Etc. All Complete As Specified, And Directed By Engineer-In-Charge. , Providing And Fixing Straight / Inclinedcentering And Shuttering In Sub Structure For All Depths Upto Ffl Levelincluding Strutting, Bracing, Propping Etc. Keeping The Same In Position During Concreting And De-Shuttering & Removal Of The Same After Specified Period As Per Specifications.Keeping Necessary Provision For Inserts, Projecting Dowels, Or Any Other Fixture Etc. All Complete And As Specified And Directed Byengineer-In-Charge Complete With All Tools And Tackles, Materials, Labour Charges, Consumables Etc. ( Form Work Shall Be Supplied By The Contractor And Shall Remain The Property Of The Contractor ) , Providing And Fixingstraight / Inclined Centering And Shuttering In Super Structure At All Heights Above Ffl Level Including Strutting, Bracing, Propping Etc. Keeping The Same In Position During Concreting, De-Shuttering & Removal Of The Same After Specified Period As Per Specifications Etc., Keeping Necessary Provision For Inserts, Projecting Dowels, Or Any Other Fixture Etc. All Complete And As Specified And Directed Byengineer-In-Charge Complete With All Tools And Tackles, Materials, Labour Charges, Consumables Etc. ( Form Work Shall Be Supplied By The Contractor And Shall Remain The Property Of The Contractor ) , Supplying, Fabricating And Placing In Position High Strength Deformed Steel Bar Reinforcement Of Grade Fe500 For Rcc Work, Straightening, Cleaning, Decoiling, Cutting, Bending To Required Shapes And Lengths As Per Details, Binding With Contractors Own 16 Standard Wire Gauge ( Swg ) Black Soft Annealed Binding Wire At Every Intersection, Supplying And Placing With Proper Cover Blocks, Supports, Overlaps, Chairs, Spacers, Lifting Hooks Etc For All Heights & Depths Etc. All Complete As Directed By Engineer-In-Charge. , Providing And Laying Brick Masonry In Sub Structureup To Ffl Level Using Cement Mortar 1:5 ( 1 Cement:5 Coarse Sand ) For Alldepthsincluding The Cost Of Materials, Labour, Tools And Tackles, Scaffolding / Staging, Sampling And Testing, Soaking Of Bricks, Cutting And Laying Of Bricks, Providing Recesses, Making Openings Of Any Shape And Size, Embedding The Fittings, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. , Providing And Laying Brick Masonry In Super Structureabove Ffl Level Using Cement Mortar 1:5 ( 1 Cement:5 Coarse Sand ) For Allheightsincluding The Cost Of Materials, Labour, Tools And Tackles, Scaffolding / Staging, Sampling And Testing, Soaking Of Bricks, Cutting And Laying Of Bricks, Providing Recesses, Making Openings Of Any Shape And Size, Embedding The Fittings, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. , Providing And Laying Half Brick Masonry In Cement Mortar 1 : 4 ( 1 Cement : 4Coarse Sand ) For All Depths And Heightsincluding Cost Of Materials, Cement, Labour, Scaffolding, Sampling, Testing, Supplying And Placing 2 No. 8 Mm Dia. Diarebars At Every Fourth Course, Sealing The Gap Between Masonry And Soffit Of The Beam / Slab, Embedding The Fittings And Fixtures, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. Note:- The Cost Of Reinforcement Shall Be Paid Seperately Under Relevant Items. , Providing 15Mm Thick Cement Plasterin Cement Mortar 1:4 ( 1Cement:4 Fine Sand By Volume ) Onbrick Masonry / Concrete Surfaces Including Preparation Of Base, Cleaning, Chipping, Scaffolding, Finishing, Curingincludingmouldings And Providing Grooves In Plaster, Bands, Mouldings Etc. As Specifiedfor All Depths And Heights Including Labour Charges, Tools And Tackles, Material Costs Etc. As Per Specifications And Asdirected By The Engineer-In-Charge. , Providing 12Mm Thick Cement Plasterin Cement Mortar 1:4 ( 1Cement:4 Fine Sand By Volume ) Onbrickmasonry, Concrete Surfacesincluding Preparation Of Base, Cleaning, Chipping, Scaffolding If Required, Finishing, Curingincludingmouldings And Providing Grooves In Plaster, Bands, Mouldings Etc. As Specifiedfor All Depths And Heights Including Labour Charges, Tools And Tackles, Material Costs Etc. As Per Specifications And Asdirected By The Engineer-In-Charge. , Providing 6Mm Thick Cement Plaster In Cement Mortar 1:3 ( 1Cement:3 Fine Sand By Volume ) On Roof Ceilings, Concretesurfaces Including Preparation Of Base, Cleaning, Chipping, Packing Of Electrical Works, Scaffolding, Finishing, Curing Etc.For All Heights Complete With All Labour Charges, Material Costs, Tools And Tackles Etc.As Per Specifications And As Directed By The Engineer-In-Charge. , Providingandapplying Two Coats Of Interior Emulsion With Wall Putty Of Approved Make Of Any Shades / Coloursover One Coat Of Primer Asper The Specifications Includingnecessaryscaffolding And Surface Preparation Consisting Of Application Of Plaster Of Paris Punning Over Entire Surface, Filling All Holes And Depressions With White Cement, Applying A Coat Of Primer, Two Or More Coats Of Oil Based Putty ( As Per Manufacturers Recommendations ) Sand Paperingetc. In Walls And Roof Ceiling, Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applyingweather Proof Textured Exterior Paint On Rcc / Brick Walls / Plastered Surface Etc. Of Asian , Nerolac, Berger Or Any Other Equivalent Approved Make, One Coat Of Primer Andtwo Or More Coats ( To Give A Smooth And Even Shade ) Of Anti-Fungal, Water Proof, Anti Flakingweather Proof Paintof Approved Quality And Shade Etc. Asper The Specifications Includingnecessaryscaffolding, Cleaning And Surface Preparation, Preparation Consisting Of Application Of Plaster Of Paris Punning Over Entire Surface, Filling All Holes And Depressions With Plaster Of Paris, Applying A Coat Of Primer, Two Or More Coats Of Oil / Water Based Putty ( As Per Manufacturers Recommendations ) Sand Papering Etc., All Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Textured Granular Type Wall Coating Of Bakelitehylam Ltd. Or Approved Equivalent, Consisting Of Twin Pack Fine Gradesilica Granules / Dry Flakes Made Of Special Grade Of China Clay / Granite Type Flakes Of Heritage Or Equivalent In Approved Shade And Texture;Mixed In-Situ With 100% Acrylic Polymer Bonding Agent; Applied Overplastered Surfaces; The Granules / Flakes Etc., Bonding Material, Mixing, Method Of Application, Surface Preparation Etc. All Shall Be As Per Manufacturers Recommendations And Specifications All Complete As Directed By Engineer In Charge. , Supplying, Transporting, Storing, Fabricating & Erecting In Position Bolted And / Or Weldedstructural Steel Works Like Angles, Channels, Beams, Plates, Square / Round Bars, Pipes, Tubesfor Ladders At All Heights & Levels And Locations Including All Builtup Sections / Compound Sectionsmade Out Of Rolled Sections And / Or Plates / Bent Plates For Curb Edging Etc., Cutting To Required Size, Straightening / Bending If Required, Edge Preparation, Cleaning, Scrapping & Welding, Preheating, Finishing Edges By Grinding, Fixing In Line And Level, Including Preparing The Surface For Painting, Surface Cleaning, Wire Brushing, Removal Of Mill Scale, Dust, Rust, Oil Or Grease Etc Complete Along With Providing Paint System As Follows: ( A ) Applying Inorganic Zinc Silicate Coat 75 Micron Dft ( B ) Two Coats Of Epoxy Primer Paint 75 Micron Dft Each ( C ) Two Coats Of Anti Rust Epoxy Top Coat Paint 100 Micron Dft Each As Per Manufacturers Specifications And As Directed By Engineer-In-Charge. Note:-One Coat Of Zinc Silicate And One Coat Of Epoxy Primer Shall Be Applied On Structural Steel Surfaces After Grit Blast Cleaning In Workshop Prior To Erection As Per Specifications And As Directed By Engineer-In-Charge. Supply Of All Materials In Contractors Scope. , Providing And Laying Vitrified Floor Tiles Of 600Mmx 600Mmofjohnson Or Approved Equivalent Makelaid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement:4 Sand ) , Including A Coating Of Adhesive As Per Manufacturers Specifications, Flush Pointing Of Joints Of Tiles With Cement Paste, Grouting With White Cement And Pigment With Colour Matching The Shades Of Tiles Including Skirting, Finishing, Curing, Material Costs, Labour Charges, Tools And Tackles Etc. All Complete As Directed By Engineer-In-Charge. , Providing And Laying Of Premium Quality Antiskid Ceramic Tiles Of Size 300X300 Ofapproved Make Floor Matt Finished Colour, Nonslip, Decorative Type Of Tiles, Approved Make With Bed Of 20Mm Thick Cement Mortar 1:3 In Line And Level Including Cleaning The Finished Surfaces With Oxalic Acid Including Skirting Out The Joints, Flush Pointing Of Joints Of Tiles With Cement Paste / Grout Mixed With Colour Pigments Matching The Shade Of Tiles, With Material Costs, Tools And Tackles, Labour Charges Etc.As Per Specifications, Standards And Instructions Of Engineer-In-Charge. , Providingand Laying Coloured Glazed Ceramic Tiles For Wall / Dado ( Grade I Quality ) , Ofapproved Make & Shade Including 20 Mm Thick Cementbedding C.M. 1:3, Pvc Beading With Matching Colour, Pointing And Finishing Exposed Joints With White Cement / Matching Colour Pigment, Etc., Including Cleaning The Finished Surface, All Complete With Material Costs, Tools And Tackles, Stagings Labour Charges As Perspecifications And As Directed By Engineer-In-Charge. , Providing And Fixing Tray Type Aluminium Plank False Ceiling Consisting Of 254 / 305Mm X 1264Mm Or 600Mm X 600Mm Size Aluminium Planks ( Profiled For Positive Engagement Into Clip-In Profiles And Demounting Of Individual Planks ) Manufactured Out Of 0.7Mm Thk. Aluminium Alloy 3105 / 3005 / 5052 ( As Per Astm 209M ) With Stove Enamelled ( Coil Coated ) Finish In Approved Colour And Suspension System Consisting Of 0.5Mm Thk. 40Mm X 20Mm Galvnized Steel Clip-In Main Runner Profiles ( @1264M Or 600Mm As Per Plank Size ) Supported By And Including 0.5Mm Thk. 25Mm X 16Mm Gi Suspension Angle, 1Mm Thk. 25Mm X 34Mm X 76Mm Crca Zinc Plate Steel Ceiling Brackets ( @ Max. 1264Mm C / C Or 600Mm As Per Profile ) Fixed To Roof Slab / Beam, 0.5Mm Thk. 40Mm Wide, 105Mm High G.I> Hold On Clamps Slotted For Level Adjustment, Perimeter Angles Including Providing Slit Openings For Fixing Supply / Return Air Grill, Lighting Fixtures, Ac Ducts Etc. All Complete As Directed By Engineer In Charge. , Providing And Fixing In Positionupvc Doors Both Single Leaf / Double Leaf White In Colour Comprising Of Glass Panel Minimum 5Mm Thick And Upvc Panels Of Minimum 15Mm Thickness ( Doors May Be Either Partly Glazed Partly Paneled Or Fully Panelled ) With Upvc Stiles, Rails, Frame And Accessories Holdfasts, Hinges, Pull Handles On Both Sides, Locking Arrangement As Per Requirementincluding Labour Charges, Material Cost, Tools And Tackles All Complete As Per Specifications & As Directed By Engineer-In-Charge. , Providing And Fixing In Position Two Track Two Panel Sliding Upvc Windows ( With Clear 5Mm Thick Glass ) , White In Colour Including All Fixtures, Fastenings, Sliding System, Sliding Handle With Flush Lock, Epdm Gaskets, Wool Pile Etc., Making Recesses In Brick / Concrete Surfaces And Making Good The Same After Fixing All Complete As Per Directions Of Engineer-In-Charge. , Providing And Fixing Isi Marked, Overall 30Mm Thickblock Board Flush Door Shutters Of Kutty Or Approved Equivalent Decorative Type, Consisting Of Solid Core Block Board Bonded With Phenol Formaldehyde Synthetic Resin And Faced On One Side With Decorative1mm Thick Laminate And Another Side With Water Proof Laminate Of Archidply Or Approved Equivalentincluding Providing And Fixingt Type Second Class Teakwood Perimeter Beading Fixed By Means Of Approved Quality Neoprene Based Adhesive And Nailing @ 300Mm Max., Providing And Fixing 125Mm Long Stainless Steel Butt Hinges [ For Each Shutter ( Vertical Spacing Not Exceeding 600Mm ) Including Providing Wooden Filler / Sealer, Stainless Steel Lock With Status Indicator, Teak Wood Lipping, Aluminium Butt Hinges, 3Mm Thick Anodised ( Anodic Coating Not Less Than15 Microns ) Aluminium Kicking Plate Fixed With Screws For Entire Door Width On Either Side Of Door For A Height Of 600Mm, Fixing With Door Frame, Door Bush, Finishing Etc . All Complete As Directed By Engineer-In-Charge. , Providing And Fixingsecond Class Teak Wooden Framesfor Doors, Windows, Ventilators, Cipboards Etc. For All Heights Including All Labours, Tools, Tackles, Cutting, Shaping, Jointing, Applying A Coat Of Bituminous Paint On Concealed Surface, Wood Primer On Exposed Surface, Fixing In Masonry / Rcc By Means Of 300Mm X 25Mm X 6Mm Thick M.S. Hold Fasts Screwed To Frame @ 600Mm Max Vertically And Grouted With 1:2:4Concrete By Volume In Min. 350Mm X 100Mmx100mm Sized Hole Made In Masonry / 96Mm Long, 12Mm Dia M.S. Dash Fastner, Painting With Two Coats Of Approved Shade And Make ( Ici Or Equivalent ) Synthetic Enamel Paint Over Appoved Quality Primer Coat, Finishing Etc. All Complete As Dirercted By Engineer-In-Charge. , Providing & Laying To Required Slope Cement Concrete Screed Of Mix 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Coarse Aggregates 12.5Mm And Down Graded Aggregates ) Using 53 Grade Opc Inroof Terrace Etc. Laid To Required Slope And Thickness & Inclusive Of Curing / Pond Curing, Brooming With Wire Brush, Finishingetc.All Labours, Tools And Tackles Complete As Per Drawing, Specification & As Directed By Engineer In Charge. , Providing And Laying In Situ Seven Course Water Proofing Treatment With App ( Atactic Polypropylene ) Modified Polymeric Membrane Over Roof Consisiting Of First Coat Of Bitumen Primer @ 0.40Kg Per Sq.M. 2Nd, 4Th & 6Th Courses Of Bonding Material @ 1.20Kg / Sq.M, Which Shall Consist Of Blow Type Bitumen Of Grade 85 / 25 Conforming To Is:702, 3Rd And 5Th Layers Of Roofing Membrane App Modified Polymeric Membrane 2.0Mm Thick Of 3.00Kg / Sq.M Weight Consisting Of Five Layers Prefabricated With Centre Core As 100 Micron Hmhdpe ( High Density & High Molecular High Density Polyethylene ) Film Sandwiched On Both Sides With Polymeric Mix And The Polymeric Mix Is Protected On Both Side With 20 Micron Hmhdpe Film. 7Th, The Top Most Layer Shall Be Finished With 16Mm Thick Pressed Clay Tiles Grouted With Cement Mortar 1:3Mixed With 2 % Integral Water Proofing Compound By Weight Of Cement Over A 12Mm Layer Of Cement Mortar 1:3 And Finished Neat As Per Specification And Directions Of Engineer-In-Charge. , Providing & Fixing White Glazed Earthernware Indian Pan Type Water Closetof Parry Ware Or Approved Equivalent With Integral Footrest, Includingall Fittings, P Or S Traps, Cutting Walls, Floors Making Good Of Same, Finishing, Soldered Joints, Making Inlet / Outlet Connection, Providing Min. 150 Mm Thick Sand Cushion, Finishing, Etc.All Complete As Directed By Engineer-In-Charge. , Providing & Fixing White Floor Mounted European Water Closet ( Ewc ) With Dual Flush Cistern Of Parry Ware-Verve Or Approved Equivalent Make Including Cistern, Cistern Lid, Antimicrobial Seat Cover With Lid, Fitting, Slim Line Health Faucet With Hose & Hook, Bibcock Andother Standard Accessories, All Fittings And Fixturesincluding Cutting Walls, Floors Making Good Of Same, Making Inlet / Outlet Connection, Finishing, Etc.All Complete As Per The Directions Ofengineer-In-Charge. , Providing And Fixing White Glazed Earthern Warehalf Stallurinal Of Parryware-Niagara Or Approvedequivalent, Includingcp Urinal Push Angle Valve, Cp Brass Spreader With 32 Mm Dia Pvc Pipe, Tee, Distribution Pipe, Brackets Etc. Making Inlet & Outlet Connections Fixing With Cp Brass Screws, Finishing, Etc. All Complete As Directed By Engineer-In-Charge. , Providingandfixingin Position White Glazed Earthern Ware Vitreous Chinawash Basin Ofparryware-Inslim Or Approved Equivalent With One C.P Brass Single Lever Pillar Cock With Aerator Tap Of Parryware-Spark Or Approved Equivalent, One No Ofcp Angle Valve With Wall Flange, C.P. Brass Waste, Pvc Drain Pipewith Heavy Bottle Trap Of Parry Ware Or Approved Equivalent Make, C.I. Brackets And All Accessories Complete Including Cutting Walls, Floors And Making Good The Same, Painting All Exposed Metallic Surfaceswith 2 Coats Of Approved Shade And Quality Synthetic Enamel Paint Over An Approved Quality Priming Coat Of Red Oxide Zinc Chromate Making All Connections, Fixing, Finishing, Etc. All Complete As Per Specifications And As Directed By Engineer-In-Charge. , Providing And Fixing 600 X 450Mm Mirror Of Superior Glass Of Parryware-Reflexion Or Approved Equivalent Complete With Cp Brass Screws, Fastners And Washers Complete As Directed By Engineer-In-Charge. , Providing And Fixing600 Mm Long Cp Rodtowel Rail Of Parry Ware Make Or Approved Equivalent Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour All Complete As Specified By Engineer-In-Charge. , Providing And Fixing In Position Approved Quality Liquid Soap Dispenser Ofparrywareor Approved Equivalent Make, Of Standard Size With Snap Fittings, Including Drilling Holes, Fixing With Cp Screws All Complete As Directed By Engineer-In-Charge. , Providing And Fixing C.P. Brass Shower Rose 100Mm Diameter With 15 To 20Mm Inlet Of Parryware Or Equivalent Approved Including 230Mm Shower Arm, Making Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Of Cp Brass Twin Robe Hook Of Parryware / Approved Equivalent Including Fixing The Coat Hook Including Drilling Holes On Plastered / Tiled Wall And Doors Fixing The Coat Hook With Cp Screws Including All Fittings & Fixtures, Labour Tools And Tackles, Making The Good The Same, All Completeas Directed By Engineer-In-Charge. , Providingandfixing In Position White Glazed Earthern Ware Vitreous Chinadivisional Plate Partition For Urinals Of Size 350X675x130mmparryware-Magnum Or Approved Equivalentplacedbetweenurinalsanchoring And Fixing The Divisional Plate With Fastners / M.S. Channelssuitably Embedded In Wall With Grouting, Painting All Exposed Metallic Surfaces With Two Coats Of Approved Shade And Quality Synthetic Enamel Paint Over An Approved Quality Priming Of Red Oxide Zinc Chromate, Making Good Of All Damaged Work, Finishing Etc., All Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Fixing15 Mm Nominal Outer Dia. & Sdr11 Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes ( Exposed On Wall ) , Of Approved Equivalent Make Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings & Accessories Including Fixing The Pipe With Clamps At 1M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent And Testing Of Joints Complete As Per Directions Of Engineer-In-Charge. , Same As Sl. No:-460 Above, But For 20Mm Nominal Outer Dia. Pipes , Same As Sl. No:-460 Above, But For 50Mm Nominal Outer Dia. Pipes , Providing And Fixing 150 Mm Dia. Rigid Pvc Rain Water Pipeswith Ms Holder Clamps Including Fixing / Embedding Into Masonry / Concrete, Providing Connections Like Shoes, Vents, Specials, Bends Etc. Fixing In Perfect Plumb Etc. All Complete Including Jointing With Bonding Solution Of Approved Quality And Make With Pressure Rating Of 4 Kg / Sq.Cm Including Clamps, Connections, Etc. Complete As Per Specifications And As Directed By Engineer-In-Charge. , Providing And Fixing100 Mm Dia.Rigidpvc Pipes With Pressure Rating Of 4 Kg / Sq.Cm Of Approved Brand Including All Fixtures As Vent Pipe For Septic Tank, Machine Welded, Rubber Ring Jointsusing Approved Lubricant, Making Hole In The Slaband Restoring The Same To The Original Condition Including Provision Of Cowl In The Septic Tank Vent Pipe Etc. Complete As Per Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing 15 Mm Dia. Nominal Bore Galvanized Iron ( Gi ) Medium Duty Pipes Ofapproved Make Complete With Gi Fittings ( Reducers, Unionsetc. ) And Clamps Including Making Good The Walls Etc., Concealed Pipe Including Cutting Chases And Makinggood The Wall Complete As Per Directions Of Engineer-In-Charge. , Same As Sl. No:-510 Above, But For 20Mm Nominal Outer Dia. Pipes , Same As Sl. No:-510 Above, But For 40Mm Nominal Outer Dia. Pipes , Same As Sl. No. 510 Above, But For 80Mm Dia. Nominal Bore Pipes. , Same As Sl. No. 510 Above, But For 100Mm Dia. Nominal Bore Pipes. , Same As Sl. No. 510 Above, But For 150Mm Dia. Nominal Bore Pipes. , Providing And Fixing Two Way Bibcock Single Lever Range With Flange Of Parryware Or Equivalent Approved 15Mm Nominal Bore Cp Including Fixingand Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Parryware Or Equivalent Approved 15Mm Nominal Bore Brass Bibcock Including Breaking Walls And Making Good The Same, Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Parryware Or Equivalent Approved 15Mm Nominal Borebrass Angle Valve Including Breaking Walls And Making Good The Same, Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing 50 Mm Nominal Bore Gun Metal Gate Valve ( Lever Type ) Lever Of Approved Quality Including All Fittings Etc. Complete As Directed By Engineer-In-Charge. , Supplying And Laying Custom ( Prefabricated ) Pvc Floor Sumps / Floor Traps Fabricated Out Of 110Mm Dia. 6 Kg / Cm2 Class Pvc Pipes With Inlet And Outlets From 40Mm Upto 75Mm, Including Providing Water Seal, Fixing To A Perfect Level, Laying Cement Concrete In 1:3:6 Mix Cp / Pvc Colour Grating With Frame At 4Mm Below Finished Floor Level Making Holes In Masonry Or Concrete Cutting Surfaces Conveying All Dismantled Portions And Clearing The Site, Making Leak Proof Joint And Testing, Etc. Complete And As Directed By Engineer-In-Charge. , Providing And Fixing Coloured 10 Litre P.V.C Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Deluxe Dual Flushofparryware Or Approved Equivalent Make With All Fittings And Fixtures Complete As Directed By Engineer-In-Charge. , Providing And Fixingaluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closerof Approved Make With Double Speed Adjustment With Necessaryaccessories And Screws With All Labour Charges, Tools & Tackles Etc. All Completeas Directed By Engineer-In-Charge. , Providing, Hoisting And Fixing In Position Rcc Precast Elementswithreinforced Cement Concrete Grade 1:1.5:3 ( 1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregate ( 20Mm & Down Size ) Withopc 53 Grade Cementfor Cable Trench, Storm Water Drain And Septic Tank Cover Slabs For All Leads, Levels, Shapes And Thickness Including All Moulds, Shuttering And Centering, Vibrating, Tamping, Curing, Chamfering, Providing Lifting Hooks, Levelling, Aligning And Fixing / Laying In Position, All Complete ( Excluding Cost Of Reinforcement ) And As Directed By Engineer-In-Charge. All Material Including Cementto Be Supplied By The Contractor. , Supply And Installation Of Cylindrical Triple Layer White Virgin Plastic Storage Tank Of Capacity 1000 Litres Of Sintex Or Approved Equivalent Onground Floor Roof With Lid And Making Necessary Cutout / Holes For Inlet, Outlet And Overflow Pipes, Necessary Connections And Sealing All Joints Properly, All Complete. Including, Fixing, Transportation To Work Site All Complete As Per Drawings And Directions Of Engineer-In-Charge. , Demolishing Reinforced Cement Concrete ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means For All Depths And Heights Below And Above Plinth Level Including Supply Of All Tools & Tackles Labours, Necessary Scaffolding, Propping, Underpinning, Cleaning And Including, Cutting, Straightening, Scrapping Of Rebars And Disposal Of Unserviceable Material Within The Refinery Premises Upto A Lead Of 3Kmas Directed By The Engineer-In-Charge. , Demolishing Plain Cement Concrete ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means For All Depths And Heights Belowand Above Plinth Level Including Supply Of All Tools And Tackles, Necessary Scaffolding, Propping, Underpinning, Cleaning And Disposal Of Unserviceable Material At Designated Places Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Demolishingbrick Masonry Incement Mortar ( Taking All Necessary Safety Precautions ) For All Depths Andheights Below Andabove Plinth Level Including Supply Of All Labours, Tools And Tackles, Necessary Scaffolding, Propping, Underpinning, Cleaning Anddisposal Of Unserviceable Material Atdesignated Place Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Demolishing Of Tile Work In Floors & Walls Laid In Cement Mortar For Thickness Upto 25Mm ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means Including Supply Of All Tools And Tackles, Propping, Underpinning, Cleaning The Siteand Disposal Of Unserviceable Materialatdesignated Place Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Dismantling Of Water Closet, Urinals, Wash Basins & Flushing Cistern Of All Types ( Ci, Pvc, Viterous China ) With Fitting And Clamps Including Pipe Lines All Complete Including Supply Of All Tools & Tackles, Stacking Material, Transporting, Loading & Unloading And Handing Overto Scrap Yard / Stores Within Refinery Premisesand Disposal Of Unserviceable Materialatdesignated Place Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Dismantling Ci , Gi, Pvc Or Asbestos Drainage Pipe With Fitting And Clamps Including Scaffolding, Staging Working Platforms All Complete Including Supply Of All Tools & Tackles, Stacking Material, Transporting, Loading & Unloading And Handing Overto Scrap Yard / Stores Within Refinery Premises And Disposal Of Unserviceable Materialatdesignated Place Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Demolishing Of Aluminium Partitions / Gypsum / Pop / Tiled / Thermocol False Ceiling , Doors, Windows, Ventilators ( Steel / Wood / Aluminium / Glass ) Shutters Including, Chowkhats, Frames, Architrave, Holdfasts And All Other Retrieved Materials ( Taking All Necessary Safety Precautions ) For All Heights Above Floor Level Including Supply Of All Labours, Tools & Tackles, Providing Necessary Scaffolding, Propping, Underpinning, Temporary Supports Etc., As Per The Instruction Of Engineer-In-Charge, Cleaning And Stacking Of Serviceable Material Like Aluminium Frames At Destined Location / Cpcl Storage Yardwithin The Refinery Area And Disposal Of Unserviceable Material Atdesignated Place Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Cutting & Clearing The Areaof Grass, Rank, Vegetation, Wild Growth Bushes, Trees And Plants Upto 30Cm Girth Measured At A Height 1.0M Above Ground Leveletc, Including Removal Of Rubbish, Grass, Plants, Bushes, By Cutting It, Removing Completely As Per Directions Of Engineer-In Charge And Collecting All Cut Grass, Vegetation Etc And Disposing It Atdesignated Place Upto 3 Km Lead Outside The Refinery Premises ( Vaikkadu Village ) With All Tools, Labour Etc. Complete As Per Specfications And Directions Of Engineer-In-Charge. , Supply Of Unskilled Labourto Carry Out Petty Works Not Assessable For Measurements / Minor Repair Works, On Day-To-Day Basis. The Rates Shall Include Esi, Pf, Payroll Cost And Allowances, Fringe Benefits, Overhead Supervision, Profits Andhand Tools Etc. All Complete As Directed By Engineer In Charge. => Limited
