Annual Maintenance (Stage) By Way Of Sanitary Fittings And Plumbing Of Various Dwellings Of Estates Department For The Year 2022-23 At New Secretariat Srinagar-- 1 Providing and Fixing Cromiumplated sanitary fittings of approved quality ( Cera,Jaquar,ParkoMake or equivalent) complete Job 2 Bib Cock 3 Bib Cock (Two Way) 4 Brass Bib Cock Plain 5 Pillar Cock 6 Angle Valve 7 Angle Valve (2 in 1) 8 Concealed Stop Cock 9 Wash Basin mixer Single hole 10 Wash Basin mixer Double hole 11 Wallmixer(Non Telescopic) 12 Wallmixer (Telescopic) 13 Wallmixer (3 in 1) 14 Sinkmixer 15 Towel Ring 20 mm dia 16 Towel Rail single 600 mm long 17 Towel Rack 600 mm 18 Health Faucet with required Chain Tube 19 C.P Cup 20 Grating 100 mm dia 21 Grating75 mm dia 22 Grating100 mm Square 23 Grating75 mm Square 24 Paper Holder 25 Tumbler Holder 26 Soap Case 27 Hand shower with Chain 28 Over Head Shower arm 305 mm 29 spindle / disc 30 Jet Pin for W.C 31 Jet Pin for W.C with Chain Tube 32 Leg Pair 33 Nipples 25 mm to 50 mm 15mm dia 34 Providing and Fixing of PVC Pipe(Type B) of approved quality ( Prince/Finolex, Jinadal/Astral Make or equivalent) in proper gradient in excavated trenches including jointing and refilling the excavated material and refurbishing complete including charges of excavation. 35 150 mm Dia 36 100 mm Dia 37 75 mm Dia 38 50 mm Dia 39 Providing and Fixing PVC fittings (Type B) of approved quality ( Prince/Finolex/Jinadal/AstralMake or equivalent) complete 40 Plain Bend 75 mm dia 41 Plain Bend 100 mm dia 42 Plain Bend 150 mm dia 43 Door Bend 75 mm dia 44 Door Bend 100 mm dia 45 Door Bend150 mm dia 46 Plain Tee 75 mm dia 47 Plain Tee 100 mm dia 48 Plain Tee150 mm dia 49 Plain Equal Junction 75 mm dia 50 Plain Equal Junction 100 mm dia 51 Door Tee 75 mm dia 52 Door Tee 100 mm dia 53 Door Tee 150 mm dia 54 Collar 75 mm dia 55 Collar 100 mm dia 56 Collar 150 mm dia 57 Floor Trap 75 mm dia 58 Floor Trap 100 mm dia 59 P/STrap 100 mm dia 60 off set 75 mm dia 61 off set 100 mm dia 62 Providing and fixingof G.I pipes (Class B)of approved quality likePrakash Surya/ Jindal as approved) with G.I Fittings but excluding trenching and refilling etc (External Work) exposed on wallcomplete job 63 15 mm dia. Nominal bore 64 20 mm dia. Nominal bore 65 25 mm dia. Nominal bore 66 32 mm dia. Nominal bore 67 40 mm dia. Nominal bore 68 50 mm dia. Nominal bore 69 Providing and fixingof G.I pipes (Class B)of approved quality likePrakash Surya/ Jindal as approved)with G.I sanitary fittings/Fixturesincluding clamps ,concealed pipe , painting with anti corrossive bitumastic paint, cutting chases and making good the wall etc. (Internal work) Exposed on wall 70 15 mm dia. Nominal bore 71 20 mm dia. Nominal bore 72 25 mm dia. Nominal bore 73 32 mm dia. Nominal bore 74 40 mm dia. Nominal bore 75 50 mm dia. Nominal bore 76 Providing and fixingof G.I pipes (Class B)of approved quality likePrakash Surya/ Jindal as approved)with G.I sanitary fittings/Fixturesincluding clamps ,concealed pipe , painting with anti corrossive bitumastic paint, cutting chases and making good the wall etc. (Internal work) 77 15 mm dia. Nominal bore 78 20 mm dia. Nominal bore 79 Providing and fixingof G.I fittingsof approved quality likePrakash Surya/ Jindal as approved)Complete Job 80 Elbow 15 mm dia. Nominal bore 81 Elbow 20 mm dia. Nominal bore 82 Elbow 25 mm dia. Nominal bore 83 Elbow 32 mm dia. Nominal bore 84 Elbow 40 mm dia. Nominal bore 85 Elbow 50 mm dia. Nominal bore 86 Tee 15 mm dia. Nominal bore 87 Tee 20 mm dia. Nominal bore 88 Tee 25 mm dia. Nominal bore 89 Tee 32 mm dia. Nominal bore 90 Tee 40 mm dia. Nominal bore 91 Tee 50 mm dia. Nominal bore 92 Union 15 mm dia. Nominal bore 93 Union 20 mm dia. Nominal bore 94 Union 25 mm dia. Nominal bore 95 Union 32 mm dia. Nominal bore 96 Union 40 mm dia. Nominal bore 97 Union 50 mm dia. Nominal bore 98 Un Equal Tee 15 x 20 mm dia. Nominal bore 99 Un Equal Tee 15 x 25 mm dia. Nominal bore 100 Un Equal Tee 15 x 32 mm dia. Nominal bore 101 Un Equal Tee 15 x 40 mm dia. Nominal bore 102 Un Equal Tee 15 x 50 mm dia. Nominal bore 103 Un Equal Tee 20 x 25 mm dia. Nominal bore 104 Un Equal Tee 20 x 32 mm dia. Nominal bore 105 Un Equal Tee 20 x 40 mm dia. Nominal bore 106 Un Equal Tee 20 x 50 mm dia. Nominal bore 107 Socket 15 mm dia. Nominal bore 108 Socket 20 mm dia. Nominal bore 109 Socket 25 mm dia. Nominal bore 110 Socket 32 mm dia. Nominal bore 111 Socket 40 mm dia. Nominal bore 112 Socket 50 mm dia. Nominal bore 113 Nipple 15 mm dia. Nominal bore 50 mm Long 114 Nipple 15 mm dia. Nominal bore 75 mm Long 115 Nipple 15 mm dia. Nominal bore 100 mm Long 116 Nipple 15 mm dia. Nominal bore 125 mm Long 117 Nipple 15 mm dia. Nominal bore 150 mm Long 118 Nipple 20x50 mm dia. Nominal bore 119 Nipple 20x75 mm dia. Nominal bore 120 Nipple 20x100 mm dia. Nominal bore 121 Nipple 20x125 mm dia. Nominal bore 122 Nipple 20x150 mm dia. Nominal bore 123 Reducer 15 x 20 mm dia. Nominal bore 124 Reducer 15 x 25 mm dia. Nominal bore 125 Reducer 15 x 32 mm dia. Nominal bore 126 Reducer 15 x 40 mm dia. Nominal bore 127 Reducer 15 x 50 mm dia. Nominal bore 128 Reducer 20 x 25 mm dia. Nominal bore 129 Reducer 20 x 32 mm dia. Nominal bore 130 Reducer 20 x 40 mm dia. Nominal bore 131 Reducer 20 x 50 mm dia. Nominal bore 132 Cross Over 15 mm dia. Nominal bore 133 Cross Over 20 mm dia. Nominal bore 134 Non Return Valve (Vertical) 15 mm dia. Nominal bore 135 Non Return Valve (Vertical) 20 mm dia. Nominal bore 136 Non Return Valve (Vertical) 25 mm dia. Nominal bore 137 Non Return Valve (Vertical) 32 mm dia. Nominal bore 138 Non Return Valve (Vertical) 40 mm dia. Nominal bore 139 Non Return Valve (Vertical) 50 mm dia. Nominal bore 140 Non Return Valve (Horizontal) 15 mm dia. Nominal bore 141 Non Return Valve (Horizontal) 20 mm dia. Nominal bore 142 Non Return Valve (Horizontal) 25 mm dia. Nominal bore 143 Non Return Valve (Horizontal) 32 mm dia. Nominal bore 144 Non Return Valve (Horizontal) 40 mm dia. Nominal bore 145 Non Return Valve (Horizontal) 50 mm dia. Nominal bore 146 Providing and Fixing Brass sanitary fittings of approved quality ( Leader/ Saint Make or equivalent) complete 147 Ball valve15mm dia nominal bore 148 Ball valve20mm dia nominal bore 149 Ball valve25mm dia nominal bore 150 Gate Valve 15 mm dia. Nominal bore 151 Gate Valve 20 mm dia. Nominal bore 152 Gate Valve 25 mm dia. Nominal bore 153 Gate Valve 32 mm dia. Nominal bore 154 Gate Valve 40 mm dia. Nominal bore 155 Gate Valve 50 mm dia. Nominal bore 156 Ball Cock15mm dia nominal bore 157 Ball Cock20mm dia nominal bore 158 Tanky Nipple 15 mm dia. Nominal bore 159 Tanky Nipple 20 mm dia. Nominal bore 160 Tanky Nipple 25 mm dia. Nominal bore 161 Tanky Nipple 32 mm dia. Nominal bore 162 Providing andfixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801 UV Stabilized and anti microbial fusion welded, having thermal stabilily for hot and coldwater supply excludlxg all PP-R plain and brass threaded Polypropylene random fittings. . This includes testing of joints complete as per direction of Engineer-in charge.Internal Work -Exposed on wall with clamps at 1.00 meter spacing 163 PN-16 Pipe, 16 mm OD(SDR-7.4)Work -Exposed on wall with clamps at 1.00 meter spacing 164 PN-16 Pipe, 20 mm OD(SDR-7.4) Work -Exposed on wall with clamps at 1.00 meter spacing 165 PN-16 Pipe, 25 mm OD(SDR-7.4) Work -Exposed on wall with clamps at 1.00 meter spacing 166 PN-16 Pipe, 32 mm OD(SDR-7.4) Work -Exposed on wall with clamps at 1.00 meter spacing 167 PN-16 Pipe, 40 mm OD(SDR-7.4) Work -Exposed on wall with clamps at 1.00 meter spacing 168 PN-16 Pipe, 50 mm OD(SDR-11) Work -Exposed on wall with clamps at 1.00 meter spacing 169 PN-16 Pipe, 16 mm OD(SDR-7.4)Concealed work including cutting chases and making good the wall etc. 170 PN-16 Pipe, 20 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. 171 PN-16 Pipe, 25 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. 172 PN-16 Pipe, 32 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. 173 PN-16 Pipe, 16 mm OD(SDR-7.4)External Work including trenching, refilling etc. 174 PN-16 Pipe, 20 mm OD(SDR-7.4) External Work including trenching, refilling etc. 175 PN-16 Pipe, 25 mm OD(SDR-7.4) External Work including trenching, refilling etc. 176 PN-16 Pipe, 32 mm OD(SDR-7.4) External Work including trenching, refilling etc. 177 PN-16 Pipe, 40 mm OD(SDR-7.4) External Work including trenching, refilling etc. 178 PN-16 Pipe, 50 mm OD(SDR-11) External Work including trenching, refilling etc. 179 Providing andfixing 3 layer PP-R (Poly propylene Random copolymer) fittings conforming to IS: 15801 UV Stabilized and anti microbial fusion welded, having thermal stabilily for hot and cold water supply . . This includes testing of joints complete as per direction of Engineer-in charge. 180 Coupler 20 mm dia. Nominal bore 181 Coupler 25 mm dia. Nominal bore 182 Coupler 32 mm dia. Nominal bore 183 Coupler 40 mm dia. Nominal bore 184 Coupler 50 mm dia. Nominal bore 185 Elbow 900 20 mm dia. Nominal bore 186 Elbow 900 25 mm dia. Nominal bore 187 Elbow 900 32 mm dia. Nominal bore 188 Elbow 900 40 mm dia. Nominal bore 189 Elbow 900 50 mm dia. Nominal bore 190 Equal Tee 20 mm dia. Nominal bore 191 Equal Tee 25 mm dia. Nominal bore 192 Equal Tee 32 mm dia. Nominal bore 193 Equal Tee 40 mm dia. Nominal bore 194 Equal Tee 50 mm dia. Nominal bore 195 Plain Union 20 mm dia. Nominal bore 196 Plain Union 25 mm dia. Nominal bore 197 Plain Union 32 mm dia. Nominal bore 198 Plain Union 40 mm dia. Nominal bore 199 Plain Union 50 mm dia. Nominal bore 200 End Plug 20 mm dia. Nominal bore 201 End Plug 25 mm dia. Nominal bore 202 End Plug 32 mm dia. Nominal bore 203 Gate Valve 20 mm dia. Nominal bore 204 Gate Valve 25 mm dia. Nominal bore 205 Gate Valve 32 mm dia. Nominal bore 206 Gate Valve 40 mm dia. Nominal bore 207 Gate Valve 50 mm dia. Nominal bore 208 Ball Valve 20 mm dia. Nominal bore 209 Ball Valve 25 mm dia. Nominal bore 210 Ball Valve 32 mm dia. Nominal bore 211 Ball Valve 40 mm dia. Nominal bore 212 Ball Valve 50 mm dia. Nominal bore 213 Cross Over 20 mm dia. Nominal bore 214 Cross Over 25 mm dia. Nominal bore 215 Cross Over 32 mm dia. Nominal bore 216 Four Way Tee 20 mm dia. Nominal bore 217 Four Way Tee 25 mm dia. Nominal bore 218 Four Way Tee 32 mm dia. Nominal bore 219 Tank Connector 20 mm dia. Nominal bore 220 Tank Connector 25 mm dia. Nominal bore 221 Tank Connector 32 mm dia. Nominal bore 222 Male Thread adapto 20x15mmdia. Nominal bore 223 Male Thread adapto 20x20mmdia. Nominal bore 224 Male Thread adapto 25x15mmdia. Nominal bore 225 Male Thread adapto 25x20mmdia. Nominal bore 226 Male Thread adapto 32x20mmdia. Nominal bore 227 Male Thread adapto 32x25mmdia. Nominal bore 228 Male Thread Elbow 20x15mmdia. Nominal bore 229 Male Thread Elbow 20x20mmdia. Nominal bore 230 Male Thread Elbow 25x15mmdia. Nominal bore 231 Male Thread Elbow 25x20mmdia. Nominal bore 232 Male Thread Elbow 32x20mmdia. Nominal bore 233 Male Thread Elbow 32x25mmdia. Nominal bore 234 Male Thread Tee 20x15mmdia. Nominal bore 235 Male Thread Tee 20x20mmdia. Nominal bore 236 Male Thread Tee 25x15mmdia. Nominal bore 237 Male Thread Tee 25x20mmdia. Nominal bore 238 Female Thread adapto 20x15mmdia. Nominal bore 239 Female Thread adapto 20x20mmdia. Nominal bore 240 Female Thread adapto 25x15mmdia. Nominal bore 241 Female Thread adapto 25x20mmdia. Nominal bore 242 Female Thread adapto 32x20mmdia. Nominal bore 243 Female Thread adapto 32x25mmdia. Nominal bore 244 Female Thread Elbow 20x15mmdia. Nominal bore 245 Female Thread Elbow 20x20mmdia. Nominal bore 246 Female Thread Elbow 25x15mmdia. Nominal bore 247 Female Thread Elbow 25x20mmdia. Nominal bore 248 Female Thread Elbow 32x20mmdia. Nominal bore 249 Female Thread Elbow 32x25mmdia. Nominal bore 250 Female Thread Tee 20x15mmdia. Nominal bore 251 Female Thread Tee 20x20mmdia. Nominal bore 252 Female Thread Tee 25x15mmdia. Nominal bore 253 Female Thread Tee 25x20mmdia. Nominal bore 254 Female Thread Tee 32x20mmdia. Nominal bore 255 Female Thread Tee 32x25mmdia. Nominal bore 256 Providing and fixing waterclosetsquatting pan(Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, of approved make like (Parry Ware/Hindware/Cera or Equivalent with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china OrissapatternW.C. panof size 580x440 mm with integral type foot rests. 257 Providingandfixingwhitevitreouschinapedestaltypewatercloset (EuropeantypeW.C.pan)withseatandlid,10literlowlevelwhite P.V.C.flushingcistern,includingflushpipewithmanuallycontrolled device(handlelever),conformingtoIS:7231, ofapproved make like (Parry Ware/Hindware/Cera or Equivalentwithallfittingsand fixturescomplete,includingcuttingandmakinggoodthewallsand floors whereverrequired: W.C. pan with ISI marked white solid plastic seat and lid. 258 Providing and fixing vitreous china dual purpose closet suitable for use as squattingpanorEuropeantypewatercloset(AngloIndianW.C.pan) with seat and lid with C.P. brass hinges and rubberbuffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflowpipe with specialsofstandardmakelike (Parry Ware/Hindware/Cera or Equivalentandmosquito proof couplingofapprovedmunicipaldesigncomplete,includingpaintingof fittingsandbrackets,cuttingandmakinggoodthewallsandfloors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend 259 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make like (Parry Ware/Hindware/Cera or Equivalent, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtureswithseatcover,cisternfittings,nuts,boltsandgasketetc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 260 Providing and fixing white vitreous china extended wall mounting water closetof size 780x370x690 mmof approvedshape and makelike (Parry Ware/Hindware/Cera or Equivalent, including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, 261 Providingandfixingwhitevitreouschinawaterclosetsquattingpan (Indian type) Orissa pattern W.C. pan of size 580x440 mm of approved makelike (Parry Ware/Hindware/Cera or Equivalent, 262 Providingandfixingwhite vitreous china pedestal type (European type/wash down type) water closet pan.of approved makelike (Parry Ware/Hindware/Cera or Equivalent 263 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 264 ExtraforusingcolouredpedestaltypeW.CPan(Europeantype)with low level cistern of same colour instead of white vitreous china W.C. pan and cistern. 265 Providingandfixing solidplasticseatwithlidforpedestaltypeW.C. pan complete: 266 White solid plastic seat with lid. 267 Coloured (other than black and white) solid plastic seat with lid. 268 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern and make like CERA OR EQUIVALENT, including painting of fittings and brackets, cutting and making good the walls wherever required : 269 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 270 WhiteVitreousChinaWashbasinsize630x450mmwitha single 15 mm C.P. brass pillar taps. 271 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 272 White Vitreous China Flat backwashbasinsize 550x400 mm single 15mm C.P. brass pillartrap 273 White Vitreous China Angle back wash basin size 600x480 mm single 15mm C.P. brass pillartrap 274 White Vitreous China Angle back wash basin size 400x400 mm single 15mm C.P. brass pillartrap 275 White Vitreous China Flat back wash basin size 450x300 mm single 15mm C.P. brass pillartrap 276 Providingandfixingwhitevitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 277 Providing and fixing white vitreous china washbasin including making all connections but excluding the cost of fittings. 278 Flat back wash basin of size 630x450 mm. 279 Flat back wash basin of size 550x400 mm. 280 Angle back wash basin of size 600x480 mm. 281 Angle back wash basin of size 400x400 mm. 282 Flat back wash basin of size 450x300 mm. 283 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 284 Semi rigid pipe 32 mm dia 285 Semi rigid pipe40 mm dia 286 Flexible pipe 32 mm dia 287 Flexible pipe 40 mm dia 288 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:250x125x25 mm 289 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White 290 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 liter white P.V.C automatic flushing cistern. 291 Providingandfixingwhitevitreouschinasquattingplateurinalwith integral rim longitudinal flush pipe. 292 Providingandfixing white vitreous chinaflatbackorwall cornertype lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. 293 Construction of plate form for water closet with Brick Masonry in Cement Mortar 1:6 mix (1 Cement: 6 Coarse Sand) including filling of sand andwith cement plaster in 1:4 (1 Cement 2 4 Fine Sand) 294 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 295 Kitchen sink with drain board 510x1040mm bowl depth 250mm 296 Kitchen sink with drain board 510x1040mm bowl depth 225mm 297 Kitchen sink with drain board 510x1040mm bowl depth 200mm 298 Kitchen sink with drain board 510x1040mm bowl depth 178mm 299 Kitchen sink without drain board 610x510mm bowl depth 200mm 300 Kitchen sink without drain board 610x460mm bowl depth 200mm 301 Kitchen sink without drain board 470x420mm bowl depth 178mm 302 Providing and fixing 600x120 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 303 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 304 Providing and fixing mirror of superior glass (of approved quality) and of requiredshapeandsizewithplasticmouldedframeofapprovedmake and shade with 6 mm thick hard board backing 305 Circular shape 450 mm dia. 306 Rectangular shape 453x357 mm 307 Oval shape 450x350mm (outer dimensions) 308 Rectangular shape 1500x450 mm 309 Providing and fixing uplasticized PVC connection pipe with brass unions 30 TO 45 CMOF 15 OR 20MM Nominal bore 310 Supplying and fixing C.I. cover without frame for manholes: 311 455x610mm rectangular C.I. cover(light duty) theweight of the cover to be not less than 23 kg. 312 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 313 560mmdiameterC.I.cover(heavy duty)theweightofthe cover to be not less than 108 kg 314 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. 315 LD - 2.5 Rectangularshape 600x450 internal dimensions 316 LD - 2.5 Square shape 450mm internal dimensions 317 LD - 2.5 Circular shape 450mm internal diameter 318 MD - 10 Square shape 450mm internal dimensions 319 MD - 10 Circular shape 500mm internal diameter 320 HD - 20 Circular shape 560mm internal diameter 321 EHD - 35 Circular shape 560mm internal dia. 322 Raising/Repairingmanholecoverand frameslabtorequiredlevelincluding dismantlingexistingslabandmakinggoodthedamageasrequiredin Brick masonary including Cement Plaster (1:4) complete 323 Providing and fixing PVC manhole cover HEAVY DFUTYof required shape and approved quality. 324 225 X 225 MM 325 300 X 300 MM 326 450 X 450 MM 327 600 X 600 MM 328 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 329 Painting withsynthetic enamel paint of approved brand and manufacture to give an even shade. 330 Two or more coats on new work 331 Twoormorecoatsonnew workoveranundercoatof suitable shade with ordinary paint of approved brand and manufacture. 332 Painting with Ready mixed wood touch on wooden surfaces of approved brand and manufacture on old work (one or more coats) including preparing of surface by cleaning and sand papering. 333 Providing and Fixing of Acrylic iluminted Signages2D Board of rectangular Shape: ( size 15x 7) havingThicknessof Board3 mm with Vinyle Lettering including wooden frame box,saver lamp and wiring all necessary items by way of chiseling of plaster for fixing the same on gate piller .Complete Job 334 15mmcementplasterontheroughsideofsingleorhalfbrickwall finished with a floating coat of neat cement of mix :1 : 4 ( 1 cement : 4 fine sand) 335 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm 336 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 337 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1 1:3:6 or richer mix (i/c equivalent design mix) 338 Providing and fixing of thermal insulation foam of standard quality and make for GI pipesas approved by incharge engineer engineer at site 339 ProvidingandfixingIstqualityceramicglazedwalltilesconformingtoIS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 340 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4(1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm (20 x20)
