Tender For Supply Of Laboratory Devices And Equipments, kalpakkam-Tamil Nadu

Tender For Supply Of Laboratory Devices And Equipments - Controllers, Calibrators And Pumps As Per Technical Specifications , Laboratory Digital Low Pressure Controller And Indicator _Range1 With Accessories. 1. Instrument Pressure Range - Required Range : 0 To 25 Mbar ( Gauge Pressure ) ( Upper Range From 25 Mbar To Maximumof 75 Mbar Acceptable ) 2. Performance Parameters2.1 Note: Performance Evaluation Of Offered Pressure Controller Will Be Based Only On Following Calibration Range As Per 2.1.1 & Calibration Span As Per 2.1.2 As Mentioned Below.2.1.1 Calibration Range: 0 To 25 Mbar 2.1.2 Calibration Span: 25 Mbar. 2.3 Precision: Shall Be Within 0.06% Reading + 0.06 % Calibration Span Including Combined Effect Of Linearity, Repeatability, Hysteresis And Temperature Effects Throughout The Operating Temperature Range. I.E. Calibration Span = 25 Mbar As Per The Specification Annexure. , Laboratory Digital Low Pressure Controller And Indicator _Range2 With Accessories. 1. Instrument Pressure Range: Required Range : 0 To 700 Mbar ( Gauge Pressure ) ( Upper Range From 700Mbar To Maximumof 2.0 Bar Acceptable ) 2. Performance Parameters 2.1 Note: Performance Evaluation Of Offered Pressure Controller Will Be Based Only On Following Calibration Range As Per 2.1.1 & Calibration Span As Per 2.1.2 As Mentioned Below. 2.1.1 Calibration Range: 0 To 700 Mbar 2.1.2 Calibration Span: 700 Mbar. 2.2. Precision: Shall Be Within 0.01 % Of Calibration Span Including Combined Effect Of Linearity, Repeatability, Hysteresis And Temperature Effects Throughout The Operating Temperature Range. I.E. Calibration Span = 700 Mbar As Per The Specification Annexure. , Laboratory Digital Pressure Indicator With Accessories. 1. Type Of Indicator: Pressure Indicator With Different Type Of Ranges And Pressure Modules For Calibration Lab. 2. Application: For Calibration Laboratory 3. No. Of Sensors: 4 Nos. ( Minimum Two Nos. Pressure Modules Shall Be Only In-Built And For Balance Two Nos. May Be External Type But They Should Supply With Necessary Hardware And Software Etc. 4. Instrument Pressure Ranges: Sensor 1 Range: 0 To 25 Mbar ( Upper Range From 25 Mbar To Maximumof 75 Mbar Acceptable ) Sensor 2 Range: 0 To 350 Mbar ( Upper Range From 350 Mbar To Maximumof 450 Mbar Acceptable ) Sensor 3 Range: 0 To 700 Mbar ( Upper Range From 700 Mbar To Maximumof 2 Bar Acceptable ) Sensor 4 Range: 0 To 7 Bar ( Upper Range From 7 Bar To Maximumof 20 Bar Acceptable ) As Per The Specification Annexure. , Digital Pressure Manometer Cum Loop Calibrator_Range1 With Accessories. 1. Type: Compound Pressure 2. Pressure Sensing Element: Sensor Shall Be Piezoresistive, Capacitance, Silicon Resonant, Etc Sensor With Temperature Compensation. And Sensor Module Shall Be Inbuilt / External Type. 3. Range: + / - 25 Mbar ( Max Range Up To + / - 75 Mbar Acceptable ) 4. Calibration Range: + / -25 Mbar 5. Precision: Shall Be Within ±0.06 % Of Fs* ( See Note-1 ) Or Better ( Including Combined Effect Of Repeatability, Hysteresis ) At Temp Compensation Range. As Per The Specification Annexure. , Digital Pressure Manometer Cum Loop Calibrator_Range2 With Accessories. 1. Type: Compound Pressure 2. Pressure Sensing Element: Sensor Shall Be Piezoresistive, Capacitance, Silicon Resonant, Etc Sensor With Temperature Compensation. And Sensor Module Shall Be Inbuilt / External Type. 3. Range: + / - 350 Mbar ( Max Range Up To + / - 750 Mbar Acceptable ) 4. Calibration Range: + / -350 Mbar 5. Precision: Shall Be Within ± 0.05 % Of Fs* ( See Note-1 ) Or Better ( Including Combined Effect Of Repeatability, Hysteresis ) At Temp Compensation Range. As Per The Specification Annexure. , Digital Pressure Manometer Cum Loop Calibrator_Range3 With Accessories. 1. Type: Compound Pressure 2. Pressure Sensing Element: Sensor Shall Be Piezoresistive, Capacitance, Silicon Resonant, Etc Sensor With Temperature Compensation. And Sensor Module Shall Be Inbuilt / External Type. 3. Range:-0.7 To + 6.0 Bar ( Max Range Up To -1 To 10 Bar Acceptable ) 4. Calibration Range: -0.7 To + 6.0 Bar 5. Precision: Shall Be Within ±0.035 % Of Fs* ( See Note-1 ) Or Better ( Including Combined Effect Of Repeatability, Hysteresis ) At Temp Compensation Range. As Per The Specification Annexure. , Low Pressure Generation Pump With Accessories. • Pressure Generation Range : + / - 400 Mbar ( Max Up To +700 Mbar & Min Up To -700 Mbar Is Acceptable ) • Required Min Generation Of Pressure: + 400 Mbar • Required Min Generation Of Vacuum: - 400 Mbar • Type: Hand Operated • Mode: Selection Knob Shall Be Provided For Pressure / Vacuum. • Pressure Media: Air As Per The Specification Annexure. , Vacuum Generation Pump With Accessories. • Vacuum Generation Range : 0 To -0.8 Bar ( Max Pump Range -1.0 Bar To +4.0 Bar Is Acceptable ) • Type: Hand Operated • Pressure Media: Air • Material Of Construction : Aluminum / Ss • Pressure Adjustment: Course As Well As Fine Adjustment Shall Be Provided. As Per The Specification Annexure , High Pressure Generation Pump With Accessories. • Pressure Generation Range: 0 To +20 Bar ( Max Pump Range Up To -1To +35 Bar Is Acceptable ) • Type: Hand Operated • Pressure Media: Air • Material Of Construction : Aluminum / Ss • Pressure Adjustment: Course As Well As Fine Adjustment Shall Be Provided With Separate Knob / Hand Wheel. As Per The Specification Annexure.

Refer document

INR 174857.0 /-

Refer document