Tender For Execution Of Work Under Mw (Ow) To Sculpture Shed At Tigwa, Distt Katni, Katni-Madhya Pradesh

Execution Of Work Under Maintenance Of W ( Ow ) To Sculpture Shed At Tigwa, Distt Katni- 1 Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side, Up To Seven Story Height Made With 40 Mm Dia M.S. Tube 1.5 M Center To Center, Horizontal & Vertical Tubes Joining With Cup & Lock System With M.S. Tubes, M.S. Tube Challis, M.S. Clamps And M.S. Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It Thereafter .The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc. Wherever Required For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineer-In-Charge .The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose .The Payment Will Be Made Once Irrespective Of Duration Of Scaffolding. Note: - This Item To Be Used For Maintenance Work Judicially, Necessary Deduction For Scaffolding In The Existing Item To Be Done. 2 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 3 12 Mm Cement Plaster Finished With Cement Mortar 1:3 Anda Floating Coat Of Neat Cement Of Mix 4 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 5 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade 6 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:1½:3 ( 1 Cement: 1½ Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 7 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade 8 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer - In -Charge.15.2.2 Nominal Concrete 1:4:8 Or Leaner Mix ( I / C Equivalent Design Mix ) 9 Brick Work With Common Burnt Clay Machine Molded Perforated Bricks Of Class Designation 12.5 Conforming To Is: 2222 In Superstructure Above Plinth Level Up To Floor Five Level In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) :6.3.1 With F.P.S. ( Non-Modular ) Bricks 10 12 Mm Thick Cement Plaster Of Mix :13.4.2 1:6 ( 1 Cement: 6 Coarse Sand ) 11 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade, Over Grills Surmounted On Boundary Wall 12 Provision For Drilling Bore Well, Installation Of Casing, Submersible Pump Starter Cable Etc. All Complete

Refer document

INR 19844.0 /-

INR 7.93 Lakhs /-