|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | a) All sorts of soil |
| 3 | b) Ordinaryrock |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 5 | a) All sorts of soil |
| 6 | b) Ordinaryrock |
| 7 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 8 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 9 | Extra for earth work beyond 1.5m depth |
| 10 | Providing & Laying of Stone Soling hand packed |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level. 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) Crushed |
| 12 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Crushed |
| 13 | Reinforced cement concrete work in arches, archribs, domes, valults, shells, folded plate and roofs having slope more than 15 upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1:5:3 (1 cement :1.5coarse sand :3graded stone aggregate 20mm nominal size) Crushed |
| 14 | Reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone agg) in walls (any thickness) incl. attached pilasters, buttresses, plinth and string courses fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor-five- level, excl the cost of centering, shuttering, finishing and reinforcement.Crushed |
| 15 | Reinforced cement cons. Work in beams, suspended floors, roofs, slope up to 15O landings, balconies, shelves, Chajjas, lintels, bands, plain window sills, stair cases and spiral starir cases, upto floor five level excl. The cost of centering, shuttering, finishing and reinforcement with 1:1:5:3 mix (1 cement: 3 coarse sand: 3 graded stone agg 20mm nominal size) |
| 16 | Supply and filling of trench around filtration plant site by way of earth filling incl all carriage unloading and spreading of earth by mechanical means all work complete job. |
| 17 | Brick work in super structureabove plinth level upto floor V level |
| 18 | Extra over Brick Work in Super structure |
| 19 | Reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete, Thermo-Mechanically treated bars. |
| 20 | Centering and shuttering including strutting, propping etc, and removal of form for. |
| 21 | Foundations, footings, bases of columns etc for mass concrete. |
| 22 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 23 | Beams , lintels, Bressumers, Cantilevers |
| 24 | Columns/pillars/piers etc |
| 25 | Suspended floors, roofs, landings, balconies and access platform. |
| 26 | Arches, domes valuts upto 6m span |
| 27 | Extra for shuttering in Circular work |
| 28 | Foundation |
| 29 | Walls |
| 30 | Beams |
| 31 | Suspended floors |
| 32 | Extra for Arches, Domes, Vaults exceeding 6m |
| 33 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- in walls etc.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD/ Silver |
| 36 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (KD/ Silver)30mm th |
| 37 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : KD/ Silver |
| 38 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 2nd class kail wood 35mm th. |
| 39 | P/F of glass panes (Floating glass) on top of window 3.5mm thick including all carriages upto site of work and beading etc as per req at site complete job. |
| 40 | 12mm thick cement plaster finished with a floating coat of neat cement of mix 1: 3 mix (1 cement : 3 fine Sand). |
| 41 | 12mm thick cement plaster finished without a floating coat of neat cement of mix 1: 6 mix (1 cement : 6 fine Sand). |
| 42 | Providing & laying of PVC pipes 80mm dia for weep holes in RRM masonry |
| 43 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification |
| 44 | Providing and laying of Hand packed stone backing of size not greater than 200mm behind R wall upto full height of Rwall including stacking in layers as complete job. |
| 45 | Structural steel work in built up sectionsin trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 46 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 47 | Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm |
| 48 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 49 | Providing & fixing of MS pipes/pipe fittings/Tees/Bendsincl, flanges, for inlet/outlet/washout etc. The job incl, welding using welding machine and genset at site of work.as per requirement at site & directions of Engineer In-Charge |
| 50 | Providing Corrugated GS Sheet roofing incl verical/curved with polymer j/l Coats 8 mm dia nuts, 0.63mm thick zinc coating |
| 51 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work |
| 52 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work |
| 53 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 54 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 thick with 20 mm nominal size stone agg. (Cruhsed) |
| 55 | Providing & incorporating during Constt. Of P.G.I sheet strips incl all sort of carriage etc as complete job. |
| 56 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 57 | a. 100 mm long |
| 58 | b. 125 mm long |
| 59 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 60 | a. 100 mm x 10 mm |
| 61 | b. 150 mm x 10 mm |
| 62 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality with all accessories and all carraiges complete. |
| 64 | 25 mm dia |
| 65 | 40 mm dia |
| 66 | 50 mm dia |
| 67 | 65 mm dia |
| 68 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)conforming to IS - 1536 : (same may be purchased if not avaialble from Divisional store) 250mm dia pipe |
| 69 | P/F of double flanges CI sluice valves conforming to IS 780 of 1984 read with upto date amendments, Kirloskar PN-I rating lift incld. cost of nuts, bolts, RI cloth incld. all sorts of carriages utpo site of work complete job incld. cost of pedestrals, extension rods upto working plateform and handles: |
| 70 | 100 mm dia |
| 71 | 150 mm dia |
| 72 | 200 mm dia |
| 73 | P/F of exhaust fans 350mm size reputed make ISI mark incld. all carriage complete job. |
| 74 | Providing and fixing of electrical points (heating and lighting) including cost of wire switches, necessary MCB\"s Switches, Switch boards,Ceiling rose reputed make ISI mark Screws,casing conduit material including all sorts of carriage and labour charges req for the job. |
| 75 | a. Lighting points. |
| 76 | b. Heating points. |
| 77 | Laying and fitting of G.I. pipes (all classes) complete including cost of pipe specials and excluding cost of Pipes and Earth work. |
| 78 | 15mm dia G.I pipes |
| 79 | 20mm dia G.I pipes |
| 80 | 25mm dia G.I pipes |
| 81 | 40mm dia G.I pipes |
| 82 | 50mm dia G.I pipes |
| 83 | 65mm dia G.I pipes |
| 84 | 80mm dia G.I pipes |
| 85 | Laying in position ofCentrifugally cast (spun) iron S &S or flanged pipes (excl cost of pipes) |
| 86 | 100 MM DI |
| 87 | 150 MM DI |
| 88 | 100/150/200 mm DI |
| 89 | Providing push on joints to centrifugally cast (spun) iron S&s including testing of joints and cost of rubber gaskets. |
| 90 | 100 MM DI |
| 91 | 150 MM DI |
| 92 | 200 MM DI |
| 93 | Making of Connections of distribution mains with supply mains….. |
| 94 | 25 mm to 40 mm Nominal Bore |
| 95 | 50mm to 80 mm Nominal Bore |
| 96 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 97 | Providing fixing of 10 to 12mm thick flanges to GI pipe including cost of rubber washers, nuts , bolts etc all work as complete job including carriage of welding machine and Gen set involving welding at site as per the ground profile complete job. |
| 98 | 65mm dia GI |
| 99 | 80mm dia GI |
| 100 | 100mm dia GI |
| 101 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper |
| 102 | 15mm thick cement plaster finished without floating coat of neat cement of mix 1: 6 mix (1 cement : 6 fine Sand). |
| 103 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 104 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 105 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 106 | Providing & fixing of 1200mm sweep ceiling fans complete with accessories including dimmer of ISI mark complete. |
| 107 | Providing & fixing CP brass Bib cock of approved qyality confirming to Is-8931. 15mm dia nominal bore. |
| 108 | Providing & fixing CP brass angle valve for basin mixer and gyser points of approved make confirming to Is-8931.15mm dia nominal bore. |
| 109 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent |
| 110 | Providing & fixing of 50 litre capacity gyser of approved quality (venus make or equivalent). |
| 111 | Providing & fixing of 16-A MCB of Indocap complete. |
| 112 | Providing & fixing MCB distribution box 10 way main double door system. |
| 113 | Providing & fixing PVC soil waste and vent pipe. |
| 114 | 100mm |
| 115 | 75mm |
| 116 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 117 | Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink with drain board 510x1040mm bowl depth |
| 118 | Providing & fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Internal works). |
| 119 | 15mm dia nominal bore. (light weight) |
| 120 | 20mm dia nominal bore. (light weight) |
| 121 | Providing & fixing GI pipes complete with GI fittings including trenching and refilling etc. (External works). 15mm dia nominal bore. (light weight) |
| 122 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x61 Omm. internal diamensions total weight of cover and frame to be not less than 38 |
| 123 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH |
| 124 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions and other accessories complete. |
| 125 | 50mm dia double acting |
| 126 | Providing and fixing of MS surface boxes (0.75x0.75x0.75) of 6mm thick plate for sluice valves. The job includs fixing of angle iron frame legs in cement concreate 1:2:4 mix with locking arrangements complete. |
| 127 | Boulder filling in walls/rooms including hand packing properly &all carriages upto site. |
| 128 | Providing ridges or hips width 60mm overall of G.S sheets fixed with polymer coated J or L hooks nolts and nuts 8mm dia G.I Limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 129 | Providing & fixing of plain Eaves boarding of 2nd class kailwood 40mm thick & 300mm wide. |
| 130 | Providing & fixing corrugated GS sheet colour coated chajja etc. soffit |
| 131 | Providing & Fixing of MS door of size(1 x 2.5m)with 3mm Ms sheet thk 40x40x6mm size angle iron frame incl. all accessories, locking arrangements, applying of approved steel primerand all carriages upto the site of work complete job. |
| 132 | Providing and fixing of MS lid of size1m x 1m of 50x50x6mm angle section with 3mm thick MS lid including all locking arrangements handles etc all work as complete job. |
| 133 | Providing and fixing of MS ladder of required height made of 50x50x6mm angle section with 40x40x5mm thick treads etc all work as complete job. |
| 134 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 135 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 136 | Supply of quarry stones including all sorts of carriage upto site of work. Complete job |
| 137 | Providing/supplying of Crates. |
| 138 | Providing hoisting and fixing trusses/purlins/rafters/posts/ post-plates or like components including cost of screws etc. complete |
| 139 | Popular wood |
| 140 | Carriage of materials by Mech. Transport including, loading, unloading and stacking for |
| 141 | cement/steel |
| 142 | 100mm dia |
| 143 | 150mm DI |
| 144 | 200mm DI |
| 145 | Gi pipe below 100mm dia |
| 146 | Sand / 20mm aggregate |
| 147 | Stone Soling |
| 148 | Bricks |
| 149 | Crate |
| 150 | Carriage of materials by Manual Laboursincl. loading, unloading and stacking avg for |
| 151 | Cement /Steel |
| 152 | Sand 20mm aggregate |
| 153 | Stone soling |
| 154 | Gi pipes below 100mm dia avg |
| 155 | 200 MM DI |
