Supply, Installation, Testing And Commissioning Of Dual Headed Spect Gamma Camera System With 16 Slice Ct Along With Required Turnkey Works-Quantity , Cat ( A ) -Supply, Installation, Testing And Commissioning Of Dual Headed Spect Gamma Camera System With 16 Slice Ct As Per Tendered Specifications At Actrec, Kharghar, Navi-Mumbai Quantity – 2 No. , Supply, Installation, Testing And Commissioning Of Dual Headed Spect Gamma Camera System With 16 Slice Ct As Per Tendered Specifications At Actrec Kharghar, Navi-Mumbai , Cat ( B ) - Turnkey Works Required Forinstallation, Testing And Commissioning Of Dual Headed Spect Gamma Camera System With 16 Slice Ct At Actrec Kharghar, Navi-Mumbai , Providing And Laying In Position Plain Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering: 1:1½:3 ( 1 Cement: 1½ Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) In Gantry Room Minimum 8 Thick Flush To Floor Tiles Level As Per The Instruction Of Engineer Incharge. , Epoxy Flooring Hardener – Self Leveling Compound: Providing And Applying Epoxy Hardener Over Concrete Surface Or Existing Tiled Flooring As Per Manufacturers Specification To Required Thickness Complete As Directed And Instructed To Get True Levelled Flooring Ready To Lay Pvc Flooring Of Any Type. , Providing And Fixing Antistatic & Conductive Floor Homogenous Vinyl Sheet Flooring Of 2.0 Mm. Thickness. Dissipates Static Charges Developed In Equipment Rooms, Ot. Etc., Preventing Damage / Malfunction Of Sensitive Electric / Electronic Equipment. Heat Welded Seamless Flooring Prevents Bacterial And Fungal Growth Coordinated Color And Patterns With Vinyl Sheet In Other Areas Of Make..Tarket / Armstrong / Polyflor With Fire Retarding Properties Confiming To Indian And International Standards. , Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge As Follows: , Gi Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending. , Providing & Supplying Of Lead Lined Doors 2 Mm Thick Lead Sheets With Lead Window All Lining For View Panel, Doors Accessories Etc Including Tower Bolt Handle, Locks All As Per The Design And Drawing All Complete. , Demolishing Brick / Block Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Outside Actrec Campus As Per Direction Of Engineer-In-Charge. , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm / 230Mm / 300 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level With Rcc Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge. Including Band And Reinforcement As Per The Instructions. , Providing And Applying External 18 Mm Thick Sand Face Cement Plaster In Two Coats At All Heights Below And Above Highest Plinth Level With First Coat Of 12 Mm Thickness With Cemet Mortar, Using Readymix Plaster ( As Per Make List ) Mixed As Per Manufacturer Specifications Including Roughening By Cross Hatch Line To Receive Top Coat Of 6 Mm Thickness With Cement Mortar And 10-12Mm Thick Single Coat Plaster Under Chajja Soffit, Including 300Mm Pvc Chicken Mesh On Both Sides Of Joint, Pp Fibre, Mixing With Additional Waterproofing Compounds Including Making Drip Moulds, Bends, Pattas, Grooves ( Grooves Have To Be Finish With Neat Cement Mixed With Waterproofing Compound ) As Per Drawing / Details, Including Double Scaffolding , Curing With Curing Compound Etc. In Line, Level And Plumb, All Complete As Per Specificationor As Directed. ( No Holes For Scaffolding Will Be Permitted Into The Brickwork ) , Providing And Applying Internal 12 Mm To 15Mm Thick Plain / Smooth Cement Plaster Finish At All Heights And Below Highest Plinth Level In Cement Mortar Using Ready Made Plaster ( As Per Make List ) As Per Manufacturer Specification Including 300Mm Pvc Chicken Mesh On Both Sides Of Joint, Making Pattas, Bends, Grooves, Over Any Bricks Or Concrete Surfaces In Single Layer As Specifiedsmooth Finished Including Preparing The Surfaces Close Hacking Of Concrete Surfaces, Curing With Curing Compound , Double Scaffolding To The Walls, Beams, Stair, Column, Pardis, Bends, Moulds, Pattas, Grooves Etc. In Line, Level And Plumb, All Complete As Per Specification Or As Directed. ( No Holes For Scaffolding Will Be Permitted Into The Brickwork ) , Exterior Weather Proof Finishing Walls With Textured Exterior Paint Of Required Shade : ( Two Or More Coats Applied @ 3.28 Ltr / 10 Sqm ) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg / 10 Sqm , Providing & Applying One / Two Coatsof Primer & Thereafter Two Coats Of Paint As Mentioned Below Of Approved Make First Quality To The Required Colour Scheme And As Per Manufacturers Instructions / Specificationsto The Walls, Beams, Columns, Ceilings, Partitions Doors Etc. Including Thoroughly Scrapping The Existing Surface With Sand Papers, Removing Old Paint, Filling Up Crevices And Levelling With Waterproofputty / Plaster Of Paris Of Necessary To Obtain Smooth Surface Etc. Complete Job Including Removal Of Stains, Painting Spots On Floors, Aluminium Window Frame & Glassetc Asto The Entire Satisfaction Of Engineer In Charge :With Two Coats Of Primer And Two Coats Ofpaint: Luster Paint , Providing & Supplying Stainless Steelss 202And Aboveperforated Type Cylindricaldustbinof230mmdia&400Mmheightas Approved By Engineer Incharge. , Picture Light ( Mural – 6’0” X 8’0” ) Should Be Provided At The Centre Of The Ceiling Inside Gantry Room. , Manufacuring, Supply, Installtion Of Executive Aristo Cabin Table L Shape Of Size 1800Mm W X 2100Mm D X 750Mm H As Per Specifications Primary Work Surface- Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Made Of 25Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Secondary Work Surface- Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel- Made Of 25Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Understructure- Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal- Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. , Seat Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. *Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Assembly: The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. High Back Size: 47.7 Cm. ( W ) X 76.4 Cm Armrests: The Armrest Top Should Be Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. , One Bunker Bed For Resident Doctor On Duty. , Manufacuring, Supply, Installtion Of Upbeat Cabin Table L Shape Of Size 1500Mm W X 600Mm D X 750Mm H With Return Echo Wooden Storage Unit Of Size 900Mm L X 450Mm D X 750Mm H With Pedestal Of Size 390Mm ( W ) X440mm ( D ) X646mm ( H ) As Per Specifications A Desk Based System Consisting Of The Under Structure Of This System Comprises Leg Assemblies And Cross Connectors. Over This Matrix Of Legs And Cross Connectors, The Work Surfaces And Wire Carriers Are Fixed. The Work Surfaces Provide Support To The Other Ancillary Elements Like Screen, Power-Box, And Access Flap. Worktop Shall Be Made Of 25Mm Thick Pre-Laminated E1 Grade E1 Grade Board / Certified Low Emitting Board Conforming To Is:12823. The Top Shall Be Laminated With A Laminate Of 0.6 Mm Thickness Of Approved Shade As Per Is:2046-1995. All The Edges Of The Work Surface Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Low Emitting Hot Melt Eva Glue And Configuration Of Access Flap Or Grommet Cut Out. The Bottom Shall Have A Backing Laminate Of 0.6 Mm Thickness. 2-Legs: The Legs Used In The Entire System Are Fabricated By Co2 Welded Ms Tube ( As Per Is: 7138 Erw ) . This Shall Be Powder Coated With An Average 50 To 60Micron Thickness Of Epoxy Powder Coating, Powder Used For Powder Coating Will Be Lead-Free, As Per Approved Shade. All Legs Have A Common Leg Lateral Member Made From Ms Erw Tube 50 Mm X 25 Mm X 1.2Mmthk ( As Per Is: 7138 Erw ) . Leg Shall Be Fabricated By Argo Shield Welding For Ms Erw Tube 50 Mm X 25 Mm X 1.2Mm Thick, 40 Mm X 20 X 1.2 Mm Thick ( As Per Is: 7138 Erw ) With The Base Of The Ms Tube, Fitted With A Glide Plate 47X47x5mm ( As Per Is: 2062 5Mm Hr ) Over Which A Straight M8 Leveller Shall Be Fitted With Bottom Translucent Cap, Which Would Allow For Height Adjustment Of 50Mm And Support Brackets 3 Mm Thick Hr ( As Per Is:2062 ) Welded On The Top Side Of Leg For Fixing Top, Powder-Coated With Average 50-60 Micron Thickness Of Epoxy Powder Coating, As Per Approved Shade. 3-Cross Connector: These Are The Supporting Members That Span Across The Leg Assemblies And Form The Under Structure Of A Workstation. These Shall Be Fabricated By Co2 Welded Ms Powder Coated And Powder Used For Powder Coating Will Be Lead-Free, The Tube Shall Be Made From Section 50 Mm X 25 Mm X 1.2Mm Thick ( As Per Is: 7138 Erw ) . Cross Members Are Assembled By Friction Fit Pdc Joinery And Grub Screws. Certain Cross Connectors Shall Be Fabricated With Argo Shield Welding With A 3Mm Thick Hr ( As Per Is:2062 ) Plate At The End. There Are Always Two Cross Members In The Under Structure For Recta / Penta, Aisle / B2b, Or Any Other Configuration. For The Extended Top, The Cross Connector Shall Be In U Shape & Attached With The End Leg. For High Table Bottom Cross Members Shall Be Made From Ss 40 X 20 X 1.6 The Tube. Eco Storage: Body Is Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edgeband. The Back Panel Is 9Mm White Plt. The Entire Construction Is Ready To Assemble Unit And Is Assembled With Suitable Kd Fittings. The Shelves And Separator Panels ( If Available ) Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. Doors : Door Panels Ae Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Center Of The Door. The Hinge Door Has Suitable Hinges And Hdu Is Fitted With An Adjustable Fitting For Height Adjustment. The Sdu Runs In A Pvc Track Mounted On The Top And Bottom Panel Of The Body. Hdu Has A Three Point Lock And Sdu Has A Push Type Lock. All The Storages Are Fitted With A 6 Mm Leveler At Bottom For Leveling. 4 - Wire Tray With An Integrated Power Box. This Is Used To Carry Data & Electrical Wires Through The Length Of The Workstation Cluster, High Table Module, And Conference Module To Give A Concealed Look. A Wire Carrier Shall Be Made With A Combination Of 0.6 Mm Thick Crca ( Is:513 ) Outer Body Along With 0.8 Mm Thick Crca ( Is: 513 ) Switch Plate ( 8+3 Anchor Roma ) Module Cut Out As Standard. These Are Mounted Either On Leg Lateral Members Or Cross Members With A Bracket Made From 3 Mm Thick Hr ( Is: 2062 ) . 5 - Access Flap: This Shall Be Soft Closing & Standard For 8 + 3 Module Electrical Points. This Shall Be Made From Aluminium Extrusion, Pdc Parts Made From Aluminium Alloy, And Plastic Parts Made From Nylon 6 And Wire Brush With Nylon Bristles. 6 -Wire Raisers The Wire Raisers Shall Be Made From 0.8 Mm Thick Crca ( Is: 513 ) With Bottom Support Made From 5 Mm Thick Hr ( Is: 2062 ) And 2 Mm Thick Crca ( Is: 513 ) Fabricated With Argo Shield Welding, Shall Be Fixed On Single / Dual Power Box. 7 - Modesty Below Worksurface: This Shall Be In Two Finishes, Metal & Wooden. Wooden Modesty Shall Be Made Of 18Mm Thick Plt, E1-P2 Grade Board For Plt Ref. Specification - Ff04 / Dsn / Std / 101.With 2Mm Pvc Lipping On All Edges. Metal Modesty Shall Be Made Of 0.8 Mm Thick Crca ( Is: 513 ) . Internal Tapped Stud Is Welded To The Modesty For Mounting. Internal Tapped Stud Shall Be Welded To The Modesty For Mounting. Both Metal And Wooden Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Made Of 3 Mm Thick Hr ( Is: 2062 ) . It Would Terminate At 400 Mm From The Ground. , The Seat And Back Shall Be Made Up Of 1.2 ±0.1Cm.Thick Hot-Pressed Plywood And Upholstered With Zipper Fabric Upholstery Covers And Moulded Polyurethane Foam. · The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. · The Seat Shall Be Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. · The Dimensions Of Back Shall Be 47.5 Cm ( W ) X 58.0 Cm ( H ) And Of Seat Shall Be 47.0 Cm ( W ) X 48.0 Cm ( D ) . · The Hr Polyurethane Foam Shall Be Moulded With Density= 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is: 7888 For 25% Compression. · The One-Piece Armrests Shall Be Injection Moulded From Black Co. Polymer Polypropylene. · The Mechanism Shall Be Designed With Centre Tilt Syncro Mechanism 360° Revolving Type, Upright-Position Locking, · Tilt Tension Adjustment, Seat / Back Tilting Ratio Of 1:3.· The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 12.0 ±0.3Cm. · The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. · The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. · The Pedestal Shall Be 66.3 ±0.5Cm. Pitch-Centre Dia. ( 76.3 ±1.0Cm With Castors ) . · The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. · Overall Dimensions Of Chair Shall Be Seat Height - Min 42.5 To Max 54.5Cm, Height - Min85.5 To Max 97.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Manufacuring, Supply, Installtion Of First Impression Reception Table As Per Specifications Top Shall Be Of Rubberwood With Clean Matt Pu Finish 18 Mm Thick , Inside Radius - 700 Mm , Outside Radius - 1350 Mm And Depth - 650 Mm . Cork Shall Be 18 Mm Thick Of Rubber . Glass Shall Be Frostered 10 Mm Thick Diamond Cut Finishing On Edges , Inside Radius Shall Be - 1202.5 Mm , Otside Radius - 1402.5 Mm And Depth - 200 Mm . The Modesty Panel Shall Be Ms Perforated Sheet Below Worksurface : 0.8 Mm ( Thick ) X 665 Mm ( Height ) X 1345 Mm ( Flat Length ) . Above Worksurface : 0.8 Mm ( Thick ) X 260 Mm ( Height ) X 1345 Mm ( Flat Length ) . The Legs Shall Be Of Ms Tube 1.6 Mm Thick Diameter 50.8 Mm And Height 604 Mm:2 Arc Of Size: 2410Mm W X 1065Mm D X 725Mm Table Top Height & 1035Mm Counter Height , 3 Seater Waiting Area Chair : Seat Shell: The Seat Shell Is Welded Assembly Of Seat Back & Side Frame. The Seat & Back Is Made Of .12+ / -0.013 Cm Thick Cr Steel Sheat With Oblong Perfrorations They Are Welded To Side Frame Of Size 3.2 + / - 0.05 Cmx 0.5 + / - 0.05 Cm Thick Hr Steel.The Welded Assemply Is Powder Coated ( 40-60 Micron ) . The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Should Have Also A Buttock Support Curve That Not Only Provide Rear Support But Also Privent Small Childern From Falling Through The Gap Between Seat & Back Clean & Flat Surfaces. : Each Seat Size 47.8 Cm ( W ) X 44.6 ( D ) Under Structure Assembly Consist Of Connecting Beam & Lack Assembly Made Of Mserw Oblong Tube Sixze Of 7.5+ / -0.03 Cm X 2.5 + / -0.03 Cm X 0.2 + / -0.016 Cm Thk. The Welded Assemply Is Powder Coated ( 40-60 Micron ) The Leg Assembly Is Fitted With Shoes & Levellers In Nylon. Connecting Beam Is Fitted With Snap Locking End Gap.Theis Welded Assembly Made Of .12+ / -0.013 Cm Thick Cr Steel Sheat With Oblong Perfrorations They Are Welded To Side Frame Of Size 3.2 + / - 0.05 Cmx 0.5 + / - 0.05 Cm Thick Hr Steel.The Welded Assemply Is Powder Coated ( 40-60 Micron ) & Fitted To Under Structure Assembly. , Supply, Laying In Trenches / On Trays / On Racks / On Wall / Structure, Testing & Commissioning Of The Pvc Insulatedflexible Copper Conductor Power Cables Of The Following Sizes Complete As Required Including Cable Marker And End Termination With Brass Compression Gland And Copper Lugs And All Fixing Accessories , 1Core X 95Sqmm Flexible Copper Cable , 1Core X 70Sqmm Flexible Copper Cablefor Earthing , Supplying, Installing, Testing And Commissioning Of Factory Fabricated 2Mm Thick Crca, Floor Mounted Cubicle Type Districution Panel Board With 150 Mm X 75 Mm X 6Mm Ismc Base Channel, Suitalbe For 415 V Tpn Comprising Of 250A Suitable Copper Bus Bars With Color Codded Heat Shrink Insulation With The Followings: 250A, 4P Mccb With Overvoltage Protection As Incommer Feeder R-Y-B Led Indicating Lamps, On Off Trip Indication Digital Multifunction Meter Of Minimum Size 150 Mm X 150 Mm To Measure Voltage, Current, Pf Etc With All Accessories Outgoing: 160 Amp Tpn Mccb, 35Ka For Spect Ct Machine- 1Nos, 63 Amp Tpn Mccb, 35Ka For Pdb- 01Nos, 63 Amp Tpn Mccb, 35Ka For Spare- 1No, 40 Amp Tpn Mcb, 25Ka- 1No. 32 Amp Tpn Mcb, 10Ka Spare - 2Nos. All Mccbs Are Strictly As Specified Above Only. All Outgoing Must Be In Compartmentalized Chamber Fully Isolated With 2 Mm Thick Crca And 3 Mm Steel Channel Painted With 2 Coats Of Red Oxide Primer Paint Followed By Finishing Paint With Interconnection Etc. , Supply Installation , Testing And Commissioning Of Lighting Distribution Board Made Out Of 2 Mm Thick ( In Case Of Fabrication ) Ms Crca Sheet With Concealed Hinges, Mounted On Ms Angle Frame & Grouted On The Wall / Fixed On The Coloum With Anchor Fastener With Earthing Terminal, Neutral Link, Interconnection With Adequate Size Of Bus-Bar / Wires, Interior Of The Db Shall Be Covered With 3 Mm Thickfrp Sheet With Necessary Cut Out, Neoprene Gasket, Painting With Seven Tank Metal Treatment Process ( Shade To Be Got Approved ) / Powder Coating All As Per Instructions Of E-I--C, Complete In All Respect. Incomer Mcb 40 Amps Tpn Mcb-- 1 No / / / .25Amps Dp Elcb ( 30Ma ) -- 3 Nos / / / .6 Amps Sp Mcb ( 8 Ways ) --24 Nos. , Supply Installation Testing And Commissioning Of Power Distribution Board Tpn Mcb Double Door Distribution Boards Dust And Vermin Protected And Rated For 415V.Three Phase Ac Supply Operation Including Incoming Mccb / Mcb / Rcbo As Per Specifications And Required Capacity Neutral Bar And Earth Terminal Complete As Required And Installed In Flush With Wall Including All Fixing Materials Required. Mcbs Shall Conform : 8828 And Rcbo / Rccb Shall Conform To Is : 12640.12 Way Tpn Mcb Db With 63A, Tpnmcb As Incomer 01 Nos , 3-Nos. 100 A Copper Bus Bars Of Equal Ratings And 36 Nos.20A Sp Mcbas Outgoings . , Supply, Laying, Testing & Commissioning Of 4 X 35 Sq. Mm Al Conductor1.1 Kv Ac Grade Pvc Insulated Isi Markarmored, Bright Annealed Copper / Aluminium Conductor Cablefixed On Wall / Coloum / Ceiling Or In Shaft / Existing Trench On 5 Mm Thick Spacers / Angle Support Fixed With Screws / Coach Screws / Anchor Fasteners, All Other Fixing Accessories Etc. As Per Instruction Of Engg.-In-Charge. For Pdb , Supply, Laying, Testing & Commissioning Of 4 X 25 Sq. Mm Al Conductor1.1 Kv Ac Grade Pvc Insulated Isi Markarmored, Bright Annealed Copper / Aluminium Conductor Cablefixed On Wall / Coloum / Ceiling Or In Shaft / Existing Trench On 5 Mm Thick Spacers / Angle Support Fixed With Screws / Coach Screws / Anchor Fasteners, All Other Fixing Accessories Etc. As Per Instruction Of Engg.-In-Charge. For Ldb , Supply, Laying, Testing & Commissioning Of 4 X 10 Sq. Mm Copperconductor1.1 Kv Ac Grade Pvc Insulated Isi Markarmored, Bright Annealed Copper / Aluminium Conductor Cablefixed On Wall / Coloum / Ceiling Or In Shaft / Existing Trench On 5 Mm Thick Spacers / Angle Support Fixed With Screws / Coach Screws / Anchor Fasteners, All Other Fixing Accessories Etc. As Per Instruction Of Engg.-In-Charge. For Ldb , Supplying & Erecting Heavy Duty Flange Type Brass Cable Glands For 4 X 35 Sq.Mm Size For End Jointing Of Various Sizes For Pvc Armoured Cable With Brass Washers, Rubber Rings Complete With Cable Ends & Leads Connected, With Gland Double Earthing, Work Completed In All Respect All As Per Instructions , Supplying & Erecting Heavy Duty Flange Type Brass Cable Glands For 4 X 25 Sq.Mm Size For End Jointing Of Various Sizes For Pvc Armoured Cable With Brass Washers, Rubber Rings Complete With Cable Ends & Leads Connected, With Gland Double Earthing, Work Completed In All Respect All As Per Instructions , Supplying & Erecting Heavy Duty Flange Type Brass Cable Glands For 4 X 10 Sq.Mm Size For End Jointing Of Various Sizes For Pvc Armoured Cable With Brass Washers, Rubber Rings Complete With Cable Ends & Leads Connected, With Gland Double Earthing, Work Completed In All Respect All As Per Instructions , Supplying & Erecting Crimping Type Copper Lugs For 35 Sq. Mm Confirming To Is Suitable For Various Core Sizes Evenly Crimped With High Pressure Tools & Connected To Switch Gear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manners Along With Lug Crimping Pest Etc , Supplying & Erecting Crimping Type Copper Lugs For 25 Sq. Mm Confirming To Is Suitable For Various Core Sizes Evenly Crimped With High Pressure Tools & Connected To Switch Gear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manners Along With Lug Crimping Pest Etc , Supplying & Erecting Crimping Type Copper Lugs For 10 Sq. Mm Confirming To Is Suitable For Various Core Sizes Evenly Crimped With High Pressure Tools & Connected To Switch Gear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manners Along With Lug Crimping Pest Etc , Providing, Fixing, Testing & Commissioning Of Mds / Siemens Make Tpn Mcb With Provided Leads On Incoming & Outgoing Side With Necessary Fixing Arrangement Duly Completed In Approved Manner All Asper Instructions And As Diredtec By E-I-C, Es.63A Tpn Mcb Including Enclosure , Providing, Fixing, Testing & Commissioning Of Mds / Siemens Make Tpn Mcb With Provided Leads On Incoming & Outgoing Side With Necessary Fixing Arrangement Duly Completed In Approved Manner All Asper Instructions And As Diredtec By E-I-C, Es.32A Tpn Mcb Including Enclosure , 6Sqmm Flexibleearthing Wire , Primary Point Wiring For Light / Fan / Exhaust Fan With1.5Sq Mm Frls1100 V Grade Pvc Insulated Copper Wire In Casing Capping / Pvc Rigid 25 Mm Conduit Withmodularswitch Socket , Plate, Fan Dimmer Accessories , Suitable Gi Box , Ceiling Rose& Appropriate Size Of Insulted Copper Wire For Earthing. Material Are Included - Modular Switch Socketfan Dimmer Modular Accessories With Surface Pvc Boards , 1.5Sqmm Size Wires , Pvc Conduit , Casing Capping And Wiring From Pvc Modular Board To Lights , Fans. , Secondary Point Wiring For Lights ( 1St Light To 2Nd Light ) With Isi Mark 1.5 Sq Mm 1100 V Grade Pvc Insulated Copper Wire In Casing Capping / Pvc Rigid 25 Mm Conduit Of ( Min 25 Mm ) With Isi Mark Switch / Bell Push Of 5 Amps Flush Type Erected On Best Qualitymodular Pvc Switch Socketfan Dimmer Accessories , Ceiling Rose& Appropriate Size Of Insulted Copper Wire For Earthing. , Erection Of Sub Mains Supply & Erecting Of Mains With 3 C X 2.5 Sq Mm Copper Pvc Insulated Wire Of 1.1 Kv Grade With Isi Mark Wire Of Copper Wire As Earth Along With Appropriate Sizes Of Approved Casing / Capping / Pvc Trunking If Requirred With Necessary Screws, Rawal Plugs Etc. Completein All As Per Instructions Of Eic.Prior Approval Is Required For Equivalent Make Etc, All As Per Instructions Of O-I-C, Es , 36 W Led Light 2 X 2 Sizewhite Colour , 5700K- 6500K , , 22W, 4 Long Led Tube , Earhting Strip 25 X 3Sqmm , Tinned Copper Earth Plate Electrode 600 X 600 X 3.15 Mm Earth Station, 2.5 Mtr Below Ground Level As Per Drawing Complete With All Required Materials Like Cole, Charcoal, Salt, Brass Nut Bolts & Washers, Watering Arrangements, Gi Pipe ( B Class ) , Concrete Chamber, Heavy Duty Cast Iron Cover Plate & Excavation In All Types Of Soil In Ground Refilling & Removal Excess Earth Within A Radius Of 500 Mtr. Etc. ( 2 Nos, Of Neutral Earthing Of T / F, 2 Nos. For T / F Body Earthing & 2 Nos. For Panel Earthing ) Note:1.The Chamber Cover & Plate Shall Be Of Heavy-Duty Hinged Type & It Shall Weigh Approx. 65 To 75 Kgs. For 450 X 450 Mm Size & Shall Be Got Approved By Dept. ( 6 Mm Chequred Plate With 40 X 40 X 6 Mm Angle Iron Frame ) 2.Plastering Shall Be Done Both Inside & Out Side.3.The Measurement Of Resistance Of Earth Station & Resistance Of Complete Scheme Of Earthing Layout Shall Be Measured, Recorded & Got Approved By Engg-In-Charge. ( Composite ) , Data Point Sockets , Data Lan Cable , Telephone Points Socket , Telephone Lan Cable , Wiring For 5 / 15 Amp Poweroutlet With2.5 Sqmm 1100V Pvc Insulated, Frls, Copper Conductor Wiresin Recessed / Surface Ms Conduit Including Cost Of Cutting And Filling Chases Supply Andfixing Of6 Pin 16Ampsshuttered Modular Switchsocket, Switch Plate With Internal Wiringin G.I. Box, Earthing Of 3Rd Pin With Pvc Insulated, Green Colour 2.5 Sqmm Copper Wire, Complete With All Accessories As Required. ( Power Socket ) . , One 16A Outletonone Circuit With Switch Socket Of Approved Make. , 5A / 15Aoutletsonone Circuit With Two Switch Sockets Of Approved Make. , Supply & Fixing Of Radiation Lamp , Supply & Fixing Of Emergency Switch , Supply & Fixing Of On / Off Switch , Supply And Laying 2.5 Sqmmpoint Wiring For Light Wiring For Lamps , Emergency Switch On Off Switch , Addressablesmoke Detectorbosch Make , Conventional Hotter With Flasher , 2X1.5 Sqmm Copper Cable Armoured , Response Indicator , Novec Gas Suppression System As Per Annexure I , 250A Mccb With Enclosure Box Ip 65 , Supply, Laying, Testing & Commissioning Of 3.5 X 185 Sq. Mm Al Conductor1.1 Kv Ac Grade Pvc Insulated Isi Markarmored, Bright Annealed Copper / Aluminium Conductor Cablefixed On Wall / Coloum / Ceiling Or In Shaft / Existing Trench On 5 Mm Thick Spacers / Angle Support Fixed With Screws / Coach Screws / Anchor Fasteners, All Other Fixing Accessories Etc. As Per Instruction Of Engg.-In-Charge. For Pdb , Supplying & Erecting Heavy Duty Flange Type Brass Cable Glands For 3.5 X 185 Sq.Mm Size For End Jointing Of Various Sizes For Pvc Armoured Cable With Brass Washers, Rubber Rings Complete With Cable Ends & Leads Connected, With Gland Double Earthing, Work Completed In All Respect All As Per Instructions , Supplying & Erecting Crimping Type Copper Lugs For 185 Sq. Mm Confirming To Is Suitable For Various Core Sizes Evenly Crimped With High Pressure Tools & Connected To Switch Gear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manners Along With Lug Crimping Pest Etc , Supplying & Erecting Crimping Type Copper Lugs For 95 Sq. Mm Confirming To Is Suitable For Various Core Sizes Evenly Crimped With High Pressure Tools & Connected To Switch Gear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manners Along With Lug Crimping Pest Etc , 8 Swg Tinned Copper Bare Wire ( 1 Run ) , Supply , Installation, Testing & Commisioning Of Hot Deeped Galvanised Perforated Type Cable Tray Manufactured From 16 Swg ( 1.6 Mm Thick ) Gi Sheet Of 300 Mm Width & 50 Mm Height Complete With Necessary Coupler Plates, Support From Ceiling, Hardware , Making Cut-Outs In Wall & Finishing Of The Same In Approved Manner. , Sitc Of Biometric Fingerprint Based Time Andattendance + Door Access Control Systemwith Rfid Technology, Power Supply Adaptor , And Have Following Special Feature:, Inout Attendance Records, Push Data Technology Users: 3000 Fingerprints Card Capacity: 3, 000 Transactions: 1, 00, 000 Communication: Rs485, Tcp / Ip, Usb , Including Indoor Biomatric Reader , Emergency Exit Switch , Double Door Electromagnetic Lock, Accessories , Istallation Commissioning Charges , And Proxy Cards Qty 30 Nosas Per Instructions & As Directed By O-I-C, Es. , Air Handling Unit , Supply , Installtion , Testing And Commissioning Ofaircooled ( Coil Section Connected To Dx System ) Floor Mounted Horizontal / Verticalahu In Double Skin Construction With Puf Sanwiched Insulation With Thickness Of 50 Mmand 0.8 Mm Thickness Pre-Plasticised Gi Outer Skin And 0.8Mm Thickness Plain Gi Inner Skin Complete With Didw Centrifugal Fan With Tefc Sq. Cage Motor Suitable For 415 ( + / - ) 15%, 50 Hz And Cooling Section With 6 Row Deep With Blue Fins , Filter Section With Non Flammable, Synthetic Fibre Box Type-Prefilters Having 90 % Efficiency Down To 10 Micron Condensate Drain Pan Of Ss-304 ( 18G ) Complete With Drain Connection, Unit Shall Be With Factory Fitted Inlet / Outletaluminium Aerofoil Dampers.Canvas Connection With Fire Retardent Sythentic Canvas , Cushy Foot Mounts, Necessary Vibration Isolation Arrangement Etc. Fa Opening Shall Have Filter And Insect Screen.Complete As Per Specificationand Instructed By Oic-Es Of Following Capacity. , 22 Tr , 8400 Cfm Ahu With 75 Mm Static Pressure Provide With ( 1W+1S ) Motor, Vfd Compatible , Sitc Of Dx Outdoor Units Complete With Rotary / Scroll Basedtype Compressors & Eco-Friendly Referigerant Gas, Cooling Mode, Low Noise Condenser Fans, Gi Coated Condenser Stands, Microprocessor Panel With Sequential Starting Of Condensing Unit, Coils, Expansion Valves, Cu Cabling, Single Phase Preventor, All Vibration Isolators, Cowl Piece With Flexible Connection, Safeties Etc. Odu To Have Specially Factory Coated Treatment For Heat & Rust Corrosion For Panels, Motor, Electricals & Heat Exchanger Etc. Air On Condenser 45 Deg C Note:- Units Consider With Outdoor Fabricated Stand. , 11 Trwith Expansion Wall, Dryand Stand ( Or Ms Stucture If Require ) , Sitc Of Refrigerant Flow System As Per Specification. , All Refrigerant Piping Shall Be Of Copper, Complete With Supports Between Indoor & Outdoor Units Duly Insulated With 13Mm Nitrile Rubber Insulation With Gc Cloth.Rmt Indicated Is For Set Of Piping Between Indoor And Outdoor Machine, Individual Piping Will Not Be Measured. All Exposed Cableshould Be Laid In Ladder / Perforated Type Tray , 11 / 8, 5 / 8 Or Equivalent To The Unit , Sitc Control Cables Between Indoor And Outdoor Unit All Exposed Cable Should Be Laid In Ladder / Perforated Type Tray. , Sitc Pvc Drain Pipe Having Pressure Holding Of 6Kg / Cm2drain Piping Complete With All Accessories With 12Mm Nitrile Rubber Insulation. , Dia. 32 Mm , Design, Supply, Fabrication And Installation Of G.S.S Ducting: ( Factory Fabricated Duct Shoul Be Provided ) . , Design, Supply, Fabrication And Installation Of G.S.S. Ducting With Volume Control Dampers On Every Branch If There Is, Powder Coated Supply / Return Air Diffusers With Required Hardware’S, Supports, Wooden Frame And Painting On Ducts, Ms Parts Etc With Acoustic Insulation 19 Mm ( Supply ) / 13 Mm ( Return ) Nitrile Rubberinsulation As Per The Smacna Standard, Approved Drawings And Instructions Of Engineer-In-Charge With The Following Gauges. Note:- All Exposed Duct Insulation Should Be With Al Cladding. , 22 Gauge G.S.S. Rectangular Duct With Necessaryinsulation And Metallic Foil. , 24 Gauge G.S.S. Rectangular Duct With Necessaryinsulation And Metallic Foil. , Aluminium Extruded Opposed Blade Collar Dampers , Supply & Fixing Of Volume Controldampers At Collars Supply / Exhaust For Above Units Made Out Of 18 Guage Gi. Frame & 20 Guage Gi Blades At The Supply & Return Air Ducts. , Sitc Of Extruded Aluminium Powder Coated Diffuser With Volume Control Damper With All Necessary Supports As Per Directed And As Instructed By Oic-Es , Sitc Of Extruded Aluminium Powder Coated Diffuser / Grillwithout Volume Control Damper With All Necessary Supports As Per Directed And As Instructed By Oic-Es , Suitable Size Of Sitc Heater Bank For Rh Control For Maintain Rh B / W 40% To 60% With Humidistat And Air Flow Control Sensor Near Heater Bank. Heater Should Be Provided Inside The Ahu And Control Of The Same To Be Provided In The Ahu Control Panelas Per Instruction And As Directed By Oic-Es , Sitc Fire Damper Ul Listed , Sitc Motorised Actuator For Fire Damper Ul Listed , Sitcsupply Cables Between Ahu And Control Panel. All Exposed Cable Should Be Laid In Ladder / Perforatedtype Tray As Per Instruction And As Directed By Oic-Es , Electrical Ahu Control Panel , Sitc Of Ahu Control Panel Has The Following Specifications: Sutable Capacity Of Vfd And Bypass Starter, Mfm Meter, Indicators, Separate Incomer Section With Isolation Mccb In Panel, Pid Controllers For Controlling Temprature And Rh Which Display Set Value And The Present Value Of Temperature& Rh, Temperature & Humiditysensor Suitable To Install In Return Air Duct Path Compatible With For Pid Controller, Control Panel Having The Configuration Of Auto Start Incase Of Power Get To Restore, Panel Shall Be Wall Mounted With Bottom Cable Entry And Installed With The Suitable Frame Structure. All Switch Gear And Cabling Inside The Panel Shall Be Factory Fitted. Panel Shall Be Tagged With Metal Name Plate. All Starters Shall Conform To Is 1882. The Starter Shall Be Enclosed In A Sheet Metal Enclosure Or Mounted Inside The Cubicle Mcc Which Would Be Dust Vermin Proof Etc. Suitable For Outside Weather Condition ( Ip-65 ) . Control Panel Should Be Bms Compatible. , Sitc M.S Structure For Installing Ahu Unit With Coating Of 2 Coat Of Redoxide And2 Coat Of Paint.The Final Ms Work Will Be As Per Site Condition. Note:- Out Door Unitsstand Shall Not Be Considered For The Measurement. , Dismantling Of Existing Ahus, Ducting , Piping, Valves, Damper , Diffusers Etc As Per Instructed And As Director By Oic-Es. , Dismatling Split Acs With All Necessary Piping , Cable , Panel, Drain Pipe Etc As Per Instructed And As Directed By Oic-Es. , All Standby Spares , Ahu Blower , Ahu Belt , Pid Controller , Supply, Installation, Testing, Commissioing Ofas Per Nfpa 99 Level 6020 Medical Grade Gas Distribution Piping Manufactured From Phophorpus Deoxidized Non Arsenical Copper To Bs En 1412:1996 Grade Cw024a Manufactured To Metric Outside Diameters Having Mechanical Properties In Accordance With Bs En 13348:2008-R250 Half Hard For Sizes Up To 54 Mm Or Bsen 133348:2008-R290 Fro Larger Sizes In Ready Made Built Up Trenches As Per Applicable Standard, Open Execution On Internal / External Walls, In Vertical Shafts, Above False Ceilings As Also Inside Removable Trunking, In Walls By Chasing Cuttingcompelete With Factory Made Fittings Such As Tee / Elbow / Crossover / Wall Sleeves Etc., Complete With Vertical & Horizontal Supports And Termination At Both Ends, Colour Coded Painting Etc. , Copper Pipe - 12 Od X 0.7 Mm Thick , Copper Pipe - 15 Od X 0.9 Mm Thick , Copper Pipe - 22 Od X 0.9 Mm Thick , Supply, Installation, Testing, Commissioing Of Medical Gas Isolation Valves, Bare On Line, Nfpa 99 Compliant, High Tensile Bronze / Brass 4 Bolt Bronze Body Double Seal Union Ball Type With Tfe / Viton Seal 400 Psig Isolation Valves With K Type Pipe Stubs-Medical Grade Copper Pipe For Fixing In The Floor Local Zone Valve Box, Area Valve Boxes, Bare For Wards. , 15Mm Od Tube , 22Mm Od Tube , Supply Installation Testing & Commissioning Of Gas Outlets Surface Mounted With Matching Adapter. The Outlet Shall Be Nfpa99 Standard , Oxygen , N2o , Suction And Oxygen Therapy Product , Supply, Installation, Testing, Commissioing Of Oxygen Flow Meters With Humidifier Bottle Bpc Complying With Iso 15002:2008 Range Of 0-15 Lpm, 3-5 Psig Humidifier Setting And All Other Hardware, Tube Etc As Per Instruction And As Directed By Oic-Es , Supply, Installation, Testing, Commissioing Of Ward Vacuum Unit Complying With Iso100793 :2000 Consisting Of 0-760 Mbar Vaccum Regulator, Vaccum Filter & 1000 Ml Vacuum Collection Jar Made From Polycarbonate / Polysulphone Material With All Other Hardware, Tubes Etc As Per Instruction And As Directed By Oic-Es. , S.S. Sink: - Providing And Fixing In Position Stainless Steel Sink With Drain Board Of Approved Make Resting Over Cuddapah And Granite Support With Waste Coupling Including Fabricating Bracket From B Class Gi Pipe With Necessary Welding, Chiselling In Wall And Fixing The Sink In Position With Waste Coupling, Bottle Trap All Complete As Per The Specified And Directed By Engineer-In Charge. Size 1145Mm X 510Mm Large X 200Mm. Including Providing And Fixing Of Pillar Cock And All The Pipeline Connection To Nearest Water And Drainage Point.
