Supply Installation & commissioning of one set of gauge for Inspection of AAR-H typecoupler. ne set consisting of 06 gauge for checking of AAR-H type coupler of LHB coaches. All Gauge are madeof hand alloy steel and hardness 45-50 HRC. Make PIE or similar. Detail description & specification are givenbellow :- (1) PIE make contour maintenance Gauge. ( Knuckle profile gauge) for checking CBC- \"H\" type coupler(APTA Drawing / Gauge No. 31000). (2) PIE make contour condemning limit Gauge ( Jaw- Cap Gauge) forchecking CBC- \"H\" type coupler (APTA Drawing/ Gauge No 34100- 1. (3) PIE make Aligning wing limit gauge forchecking CBC- \"H\" type coupler (APTA Drawing/Gauge No-32600. (4) PIE make Vertical height condemninglimit Aligning wing pocket & Guard arm gauge (NO-GO Gauge must nit pass)for checking CBC- \"H\" type (APTADrawing /Gauge No. 44250-5).(5)PIE make vertical height Condemning limit Aligning wing pocket & Guard armGauge (Go gauge must pass) for checking CBC-\"H\" type coupler (APTA Drawing/ gauge no.34101-4. (6) PIEmake knuckle nose were & stretch limit gauge for checking CBC-\"H\" type coupler (APTA Drawing /gauge no-34100-2A. The gauge quoted above will be supplied with PIE Calibration Certification traceable to nationalstandard /NPL standard not any other Agency.Consignee SSE/C&W/NBQ , NFR Assam 1.00 Set3. T AND CF.O.RDescriptionDestinationDelivery PeriodDescription Delivery /Completion Rate of SupplyPage 1 of 3 Run Date/Time: 13/10/2022 15:28:43RANGIYA DIV/N F RLYTENDER DOCUMENTTender No RN225178 Closing Date/Time 26/10/2022 14:30For all items Commencement : Within 0 Days of issue of Contract, Completion : 30Within 30 Days thereafterPayment TermsS.No DescriptionPayment Terms1 100% payment against receipt, inspection and acceptance of material by the consignee at destination.Statutory Variation ClauseS.No Description1 Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments inrespect of the items stipulated in the contract (and not the raw materials there of), within the original deliveryperiod stipulated in the contract, or last unconditionally extended delivery period shall be to Railways account.Only such variation shall be admissible which takes place after the submission of bid. No claim on account ofstatutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in hisoffer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall beadmissible on account of misclassification by the supplier/ contractor.Standard Governing ConditionsS.No Description1 IRS Conditions of Contract: The contract shall be governed by latest version (along with all correction slips) ofIRS conditions of contract, and all other terms and conditions incorporated in the tender documents.4. ELIGIBILITY CONDITIONSSpecial Eligibility CriteriaS.No. Description Confirmation Remarks DocumentsRequired Allowed Uploading1 All the bidders/tenderers should ensure that they are GST complaint and Yes Yes Not Allowedtheir quoted tax structure/rates are as per GST Law.5. COMPLIANCE CONDITIONSCommercial-ComplianceS.No. Description Confirmation Remarks DocumentsRequired Allowed Uploading1 Please enter the percentage of local content in the material being offered. Yes Yes Not AllowedPlease enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance withthe Make in India policy as incorporated in the tender conditions2 Please enter the percentage of local content in the material being offered. No Yes Not AllowedPlease enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance withthe Make in India policy as incorporated in the tender conditions.General InstructionsS.No. Description Confirmation Remarks DocumentsRequired Allowed UploadingPage 2 of 3 Run Date/Time: 13/10/2022 15:28:43RANGIYA DIV/N F RLYTENDER DOCUMENTTender No RN225178 Closing Date/Time 26/10/2022 14:301 MSE sources, for availing benefits under MSME Act, should upload valid No No Not Alloweddocuments maintained under MSME Act such as MSIC Certificate etc dulymarking the tendered item in the certificate. Otherwise, claim for benefitsunder MSME Act may not be entertained. (b) MSE source owned bySC/ST, should upload necessary documents to get the benefits of beingowned by SC/ST. Otherwise, claim for benefits under MSME Act may notbe entertainedOther ConditionsS.No. Description Confirmation Remarks DocumentsRequired Allowed Uploading1 By the Consignee No No Not AllowedSpecial ConditionsS.No. Description Confirmation Remarks DocumentsRequired Allowed Uploading1 A) All the tenderers are requested to furnish offered Brand/Make, if any. No No Not AllowedThey are also requested to attach the technical literature/leaflet. Anydeviation with respect to tender description is specifically to be mentionedin their offer. No, further correspondence regarding make/brand/deviationwill be done after opening of tender b) Authorized dealer/agent shall submittender specific authorizations from manufacturers/OEMs along with their e-bid at the time of submission of online electronic offer, in case of dealeragent received without tender specific authorization frommanufactures/OEM their offer will be summarily rejected. C)Tenderersmust submit performance documents such as copies of recent PurchaseOrders for the tendered item or similar items received from any ZonalRailways/PSU with receipt notes/completion certificate. Please note thatnon submission of such document shall be taken as they are not havingany such past performance and their offer shall be considered future as perextant rule.6. DOCUMENTS ATTACHED WITH TENDERS.No. Document Name Document DescriptionNo Document AttachedThis tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued byDepartment of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.As a Tender Inviting Authority, the undersigned has ensured that the issue of this tender does not violate provisions ofGFR regarding procurement through GeM.Digitally Signed By DMM ( JAYANTA MEDHI )Page 3 of 3 Run Date/Time: 13/10/2022 15:28:43
3
Supply Installation & commissioning of one set of gauge for Inspection of AAR-H typecoupler. ne set consisting of 06 gauge for checking of AAR-H type coupler of LHB coaches. All Gauge are madeof hand alloy steel and hardness 45-50 HRC. Make PIE or similar. Detail description & specification are givenbellow :- (1) PIE make contour maintenance Gauge. ( Knuckle profile gauge) for checking CBC- \"H\" type coupler(APTA Drawing / Gauge No. 31000). (2) PIE make contour condemning limit Gauge ( Jaw- Cap Gauge) forchecking CBC- \"H\" type coupler (APTA Drawing/ Gauge No 34100- 1. (3) PIE make Aligning wing limit gauge forchecking CBC- \"H\" type coupler (APTA Drawing/Gauge No-32600. (4) PIE make Vertical height condemninglimit Aligning wing pocket & Guard arm gauge (NO-GO Gauge must nit pass)for checking CBC- \"H\" type (APTADrawing /Gauge No. 44250-5).(5)PIE make vertical height Condemning limit Aligning wing pocket & Guard armGauge (Go gauge must pass) for checking CBC-\"H\" type coupler (APTA Drawing/ gauge no.34101-4. (6) PIEmake knuckle nose were & stretch limit gauge for checking CBC-\"H\" type coupler (APTA Drawing /gauge no-34100-2A. The gauge quoted above will be supplied with PIE Calibration Certification traceable to nationalstandard /NPL standard not any other Agency.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
