Sic Of E&M Equipment For Newly Bored T / Wells In Moti Nagar Constituency.- 1 Supply Of Sub. P / Set Fitted With Dynamically Balanced Impeller Mounted On Stainless Steel Shaft With Protection Sleeve Having Stage Bowls Of Closed Grained Shorted Type Imp, Delhi-Delhi

Sic Of E&M Equipment For Newly Bored T / Wells In Moti Nagar Constituency.- 1 Supply Of Sub. P / Set Fitted With Dynamically Balanced Impeller Mounted On Stainless Steel Shaft With Protection Sleeve Having Stage Bowls Of Closed Grained Shorted Type Impeller.The Pump Will Be Directly Coupled To Required Wet Type Induction Motor Of Speed 2900Rpm Suitable For Operation On 3 Phase 415 Volt 50C / S., Ac Supply. Discharge:-180 Lpm, Head: - 96 Mtr., Od:-125 Mm Make:Bs / Su / Cromp / Approved Make Of Djb 2 Supply Of Automatic Lt Panel Board Suitable For 415 Volts , 3 Phase , 50 Hz , 4 Wire System For Operation Ofup To15 Hp Submersible Set, Made Out Of Not Less Than 2Mm Thick Crca For Load Bearing Members, And 1.6 Mm For Doors Of Panel, Totally Enclosed , Dust And Verminproof , Floor Mounted Type .The Panel Size 760Mmx1360x300mm And Having ( 1 ) Fp Mcb 63A, 10Ka :-1 No ( 2 ) Ammeter ( Digital ) 0-50A Ae / L&T / Rep. :-1No ( 3 ) Ass 6A :-1No ( 4 ) Voltmeter ( Digital ) 0-500 :- 1 No ( 5 ) Vss 6A :- 1 No ( 6 ) Ct 50 / 5A :-3 No Contactor For Phase Reversal 40A :- 2 No ( 7 ) Phase Sequence Relay S1 Vmr7 :- 1 No ( 8 ) Tp Contactor 32A :-2 No ( 9 ) Tp Contactor 18A :- 1 No ( 10 ) Add On Block 1No+1Nc :- 5 No ( 11 ) Electronic Star Delta Timer 230V :- 1 No ( 12 ) Thermal Overload Relay 14-23A :- 1 No ( 13 ) Motor Protection Relay :-1 No ( 14 ) Indication Lamp ( R / Y / B ) 22.5Mm :- 3 No ( 15 ) Control Mcb 6A :-3 No ( 16 ) Push Button ( Start / Stop ) 22.5Mm :- 2 No ( 17 ) Auto Manual Selector Switch 6A :-1 No ( 18 ) Qt Timer Analog 24Hrs :- 1No ( 19 ) Tp Mcb 10A, 10Ka :-1 No Make Of Accessories L&T / C&S / Ae / Minilac / Selec / As Per Djb Approved 3 Supply-Of M.S. Clamp Of 600 Mm Length, Duly Fabricated Out-Of 12.5 Mm Thick, 40 Mm Wide M.S.Plate For Holding The Pipe Of 50 Mm Dia. Hsn Code:- 7307 4 Supply-Of G.I. Pipe 50Mm Dia, Medium-Class, Each Of 3±3 Meters Long, Duly Threaded On Both-Ends, Welded & Fitted With G.I. / M.S. Flange Of Minimum Thickness 6 Mm On Both Ends With A Slot For Submersible-Cable. Welding Of M.S Strips At Both Ends On Flange.Make Of Pipe: Jindal / Tata.Hsn Code:- 7308 5 Supply Of Three Core Flat Cable With Bare Bunched Copper Conductor Insulated & Sheathed With Pvc For Submersible Pump Motor With Voltage Grade Upto 1100V Of 6.0 Sq Mm. Size In 100Mtr. Roll.Make: Finolex / Havells / Cci 6 Supply-Of Tail-Piece Of Medium-Class G.I.-Pipe 500 Mm Long With One-End Threaded, As Per Out-Let Of Pump And Another-End Flanged, As Per Size Of G.I. Pipe 50 Mm Dia.Make Of Pipe:Jindal / Tata 7 Supply-Of G.I. Bend 90O X 50 Mm Dia, Having Flange At Both-Ends. 8 Supply-Of Nut-Bolts, ½” Dia Of Different Size I.E. 1.5” & 2.5” Long, Threaded Of Good Quality. 9 Supply-Of Rubber-Packing For 50 Mm Dia Flange. 10 Supply-Of Bore-Cover Plate Of Size: 200 Mm Dia, Made Out From 6 Mm Thick M.S.-Sheet In 2-Halves And A Circular-Hole Of 50 Mm Dia In Center With Lockingarrangement By Nuts & Bolts. 11 Supply-Of Orifice-Assembly 50Mm Dia, 0.6 Meter Long, Double-Flange. 12 Installation Of Pump And Motor, Electric Paneland Delivery Pipe And Flange Nut Bolt Washer The Job I / C All Tools And Tackles, Making Of Foundation For Electric Panel, Fitting Of Electrical Panel, Connection, To & Fro, Safety Equipments And Other Precautions Etc. For Each Twell.

INR 500 /-

INR 16700.0 /-

Refer document