|
| 1 | Disconnecting and taking down repairable LED type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specifiedand directed.Note : (i)The Spare parts will be measured and paid separtely.(ii) All type of T&P for repairing of street light should be provided by the contractor at own arrangememt. |
| 2 | (a) Supply only LED driver 240 Volt 50Hz for 45 to 50 watt LED fittings complete all as specified and directed. |
| 3 | (b) Supply only LED driver 240Volt 50Hz for 60 to 90 watt LED fittingscomplete all as specified and directed. |
| 4 | (c) Supply only LED surge arrester 240Volt 50Hz for 45 to 75 watt LED fittings complete all as specified and directed. |
| 5 | (d) Supply only LED surge arrester 240Volt 50Hz for 75 to 90 watt LED fittings complete all as specified and directed. |
| 6 | (e) Supply only LED bulb set for street light complete set 240Volt 50Hz for 45 to 60 watt LED fittings complete all as specified and directed. |
| 7 | (f) Supply only LED bulb set for street lightset 240Volt 50Hz for 70 to 90 watt LED fittings complete all as specified and directed. |
| 8 | Disconnecting and taking down repairable LED type street light fitting fromHigh Mast Light of any type and capacity and make from existing 15 mtrs/16 mtrs high mast pole by taking down the LED light by roatating through Electric/Mechanical Mechanism for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specifiedand directed. Note : (i)The Spare parts will be measured and paid separtely.(ii) All type of T&P for repairing of High mastlight should be provided by the contractor at own arrangememt. |
| 9 | (a) Supply only LED driver 240Volt 50Hz for 120 to 150 watt LED fittingscomplete all as specified and directed. |
| 10 | (b) Supply only LED surge arrester 240Volt 50Hz for 120 to 150watt LED fittingscomplete all as specified and directed. |
| 11 | (c) Supply only LED bulb complete set 240Volt 50Hz for 120 to 150 W watt LED fittingscomplete all as specified and directed. |
| 12 | Retightening of Loose/ Disconnected Connection of LEDtype street light fitting of any type and capacity and make on existing 9 metre /11 metre pole for Cleaning of carbon from connecting wire and joint the connection as per existing Connections andrefixing in original position,etc complete all as specifiedand directed. Note : (i) All type of T&P for Connection Checking and tightening of connection of street light shall be provided by the contractor at own arrangement. |
| 13 | Taking down old worm out /faultyLT UG Cable of size 10 Sqmm to 16 Sqmm 4 core complete all as specified and directed. |
| 14 | Laying only serviceable cable XLPE insulated and sheathed armoured 1100 volts grade heavy duty electric cable with multistranded aluminium conductor laid in trenches/duct through pipe, in floor on poles in and including aluminium thimble, Sleeve and proper insulating material i.e. PVC insulation tapecompleteof Size 10 Sqmm 4 corecomplete all as specified and directed by Engr in Charge.Note:- Serviceable cable retrived from item No 13 shall be reused) |
| 15 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 core 10 sqmmcomplete all as specified and directed. |
| 16 | Supplying and fixingin repairs1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular for connection of security /Street lights complete all as specified and directed. |
| 17 | S&F in repairs cable PVC insulated sheathed twin core stranderd Aluminium conductor of size 2.5 Sq mm for connection of security /Street lights complete all as specified and directed. |
| 18 | S&F in repairs service cable PVC insulated sheathed twin core stranderd aluminium conductor of size 6 Sq mm for connection of security /Street lights complete all as specified and directed. |
| 19 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for laying of cable foundations of poles/stays etc. and getting out in soft/loose soil complete all as specified and directed . |
| 20 | Removal of surplus excavated material n exc. 50 m and depositing where directed at a n. exc 1.5 m above the starting point complete all as specified and directed. |
| 21 | Returning filling in including spreading , levelling watering and well ramming in layers each n.exc. 25 cm thick each layer and performing bottom surface to required gradient complete all as specified and directed. |
| 22 | M & L dry and clean fine sand for cable cushioning for cable protection complete all as directed.Note : ThePunned down thickness shall be measured and paid seperatly |
| 23 | Supply and laying well burnt old size sub class \"B\" bricks laid in trenches for cable protection complete all as specified and directed. |
| 24 | S&F in replacement ofFactory made sheet metal encloser SPN single door type made out of CRCA sheetIP 43 protection 2 way 240 v dust and vermin proof includind clamps, nut-bolts for fixing of fixing on pole complete all as specified.Make -Havells or other equivalant make from HPL/Indo asian of approved by GE. |
| 25 | S&F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified and directed. |
| 26 | S&F MCB single pole neutral 240 volts, 63 Amps, 10 KA complete all as specified and directed. |
| 27 | Supply and errecting prestressed concete poles 9.00 mtrs long of cross section 102mm X 152 mm at top and 102mm X 281mmat bottom class 10complying with requirements of IS-1678-1978 including paints of poles in strips upto 1.5 metre from PCC block with two coats of synthetic enamel paint complete all as specified and directed. |
| 28 | M&L for plain cement concrete1:4:8 type D-2 using 40 mm graded stone aggregate in foundation of PCC pole/struts including necessary form work complete all as specified and directed. |
| 29 | M& L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of stay assemble etc including necessary form work complete all as specified and directed. |
| 30 | M &L for plain cement concerete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for coping bed block around poles, includingnecessary form work finishing even and smooth without using extra cement complete all as specified and directed. |
| 31 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 32 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 33 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 34 | Supply & fixingstreet light pole cable junction box IP-65 with metnic knockoutsforcable entryand the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nutsduly painted and MCB SP 6Amp etc complete all as specified & directed |
| 35 | S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade 40mm bore upto1.2 mtr longetc complete with MS clamps duly painted with two coat of aluminum paint with nuts/bolts/washers for fixing arrangement to pole /wall complete all as specified and directed. |
| 36 | M&L Painting to old LT RCC pole upto 1.5 mtr height from PCC, of synthetic enamelpaintwith Yellow and Black of 30cm strips of each color upto 1.5mtr and including wiriting pole No. completeall as specified and directed . |
| 37 | M&L painting to steel tubular pole ofsize 9metre / 11 metre hight withtwo coats aluminium paintincluding preparation of old painted surface complete all as specified and as directed |
| 38 | Supply and laying GI pipe 40 mm bore /Size \"light grade \" for cable protection including taking out old/broken/rusty GI pipe with MS clamps complete all as specified and directed. |
