Repair And Renovation Of Centralized Facilities In The Department Of Environmental Sciences In Connection With Naac Accreditation Of Jammu University- 1 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 2 Providing And Applying White Cement Based Putty Of 1.0Mm Thick ( Avg. ) Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 3 Distempering With Ist Quality Acrylic Distemper ( Ready Mixed ) Having Voc Contents Less Than 50 Gms / Ltr, Two Or More Coats Of Required Shade And Colour, Including Applying One Coat Of Water Thinable Cement Primer Of Approved Brand And Manufacture. 4 Distempering ( One Coat ) With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. 5 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Raking Out Old Putty Float Glass Panes Of Thickness 4.0 Mm ( Weight Not Less Than 10 Kg / Sqm 6 Repair To Plaster Of Thickness 12Mm To 20 Mm In Patches Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing Plastering The Wall Surface With Cement Mortar 1:4, Including Disposal Of Rubbish Outside The University Campus. 7 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish Outside The University Campus. 8 15 Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Sand ) Including Formwork / Scaffolding. All Work Upto Floor V Level. 9 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 1.67 Liter / 10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg / 10Sqm ) / All Work Upto Floor V Level. 10 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete.Powder Coated Aluminum ( Minimum Thickness Of Powder Coated 50 Microns ) 11 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer In-Charge. ( Cost Of Aluminum Snap Beading Shall Be Paid In Basic Itemwith Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 12 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge ) , Including Finishing With Cement Mortar 1:3 ( 1 Cement: 3 Fine Sand ) As Per Standard Design. In 75X75 Mm Deep Chase. 13 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate Of 20 Mm Nominal Size ) Over P.V.C. Sheet 1 M X1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 ( 1 Cement: 3 Coarse Sand ) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet Complete 14 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion.110 Mm Diameter 15 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer And Then Painting With Synthetic Enamal Paint ( Two Or More Coats ) Of Approved Brand And Manufacture ( Make Asian / Nerolac ) .In Stringers, Treads, Landings Etc. Of Stair Cases, Grating, Frames, Guard Bar, Ladder, Railing, Brackets, Gates & Similar Work Including Use Of Chequered Plate Wherever Required, All Complete 16 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing, Cost Of Centering And Shuttering. All Work Upto Plinth Level With:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 17 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer And Then Painting With Synthetic Enamal Paint ( Two Or More Coats ) Of Approved Brand And Manufacture ( Make Asian / Nerolac ) . 18 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) Including Applyiing A Priming Coat Of Wood Primer And Then Painting With Synthetic Enamal Paint ( Two Or More Coats ) Of Approved Brand And Manufacture ( Make Asian / Nerolac ) . 19 Providing And Fixing Glazed Shutters For Doors, Windows, Clearstory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S Pressed But Hinges Bright Finished Of Required Size With Necessary Screws. 2Nd Class Deodar Wood 30 Mm Thick Including Applying A Priming Coat Of Wood Primer And Then Painting With Synthetic Enamal Paint ( Two Or More Coats ) Of Approved Brand And Manufacture ( Make Asian / Nerolac ) . 20 Supply Of Labour For Different Work.Mazdoor 21 ------------Do-------------- Sweeper 22 ------------Do-------------- Carpenter 23 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade. One Or More Coats On Old Work. 24 Providing And Fixing 3Mm Thick Acp Sheet Of Approved Quality / Make ( Isi ) Including Cost Of Nuts, Bolts / Scews As Required Etc. Complete. 25 Providing And Fixing 4Mm Thick Ploycarbonate Sheet Of Approved Quality & Of Required Shade / Colour Including Cost Of Nuts, Bolts With Washers Etc. As Required. 26 Providing And Fixing Aluminum Tower Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. 150 X 10 Mm 27 Providing And Fixing Aluminum Handles Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete.Handle 125 Mm 28 Providing And Fixing Aluminum Hanging Floor Door Stopper, Isi Marked, Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete.Twin Rubber Stopper 29 Providing And Fixing Powder Coated 50 Microns Aluminum Work ( 10 Gauge ) For Doors, Windows, Ventilators, Almirahs And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Metered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.For Frames And Shutter Of Door Windows, Ventilators & Almirah Including Providing And Fixing Hinges / Pivots, Handles, Tower Bolts, Eye Hooks / Window Stays, Including The Cost Of Pvc / Neoprene Gasket, 5Mm Glass Panes / 12Mm Thick Particle Board Laminated On Both Sides, Locks Of Superior Quality Including P&F Of Double Action Hydraulic Door Closer / Floor Spring Of Approved Brand And Manufacture Is:6315 With Stainlees Steel Cover Plate Minimum 1.25 Mm Thickness. The Spacing Of Vertical / Horizontal Members Not To Exceed 4 Feet And The Section To Be Used Shall Be 104Mm X 44.45 Mm. 30 Providing And Fixing Isi Marked Flush Door Shutters Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood Andwell Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters :30 Mm Thick Including Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws. 31 Regrinding Of Terrazzo / Kota Stone Flooring And Polishing The Same Including Necessary Repairs Wherever Required To Give An Even And Smooth Surface 32 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material At Site And Disposal Of Unserviceable Material Outside The University Campus. 33 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars At Site And Disposal Of Unserviceable Material Outside The University Campus. 34 Providing And Fixing Fly Proof Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions All Complete.With 2Nd Class Teak Wood Beading 62X19 Mm 35 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per Is 13983 With C.I Brackets And Stainless Steel Plug 40Mm, Incluiding Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required 610X460 Bowl Depth 200Mm 36 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Of Serviceable Material At Site And Disposal Of Unserviceable Material Outside The University Campus. For Thickness Of Tiles 10 Mm To 25 Mm Thick 37 Chequerred Precast Cement Concrete Tiles 22Mm Thick In Footpath And Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing, Cleaning And Curing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Dark Shade Using Ordinary Cement.
