Establishment Of Advanced Virus And Other Pathogens Diagnostic …. Farmers And Entrepreneurs In West Bengal -Purchase , Particulars , Online Ups With Stabilizer: Uninterrupted Power Supply Through True Online Ups. O One 6Kva Power Bank Within Built I, mohanpur-West Bengal

Establishment Of Advanced Virus And Other Pathogens Diagnostic …. Farmers And Entrepreneurs In West Bengal -Purchase , Particulars , Online Ups With Stabilizer: Uninterrupted Power Supply Through True Online Ups. O One 6Kva Power Bank Within Built Isolation Transformer. O Double Conversion. O One Kva On-Line System O Power Backup Should Be 3Hrs+ For Both Units O Battery Bank Should Be Straight Warranty For 3 Years O Full Operation Of The System Should Be Warranted Also For Three Years. O Supply, Installation With Necessary Accessories Complete , Electrophoresis System : Mini Gel Electrophoresis • System Should Be Completely Self Contained System Designed For Quick Checks Of Samples. • Gel Casting, Running And Analysis All Should Be Performed In The Same Unit. • Should Have Uv Transparent Base To Allow Direct Viewing On A Uv Transilluminator. • Gel Dimensions Should Be 10X8cm. • Should Have In-Built Tray With Dual Comb Slots. • Two Combs Of 1.5Mm Thickness For 8 Samples Should Be Provided With The Unit. • Casting Dams Should Also Be Included For Tape Free Casting. • Buffer Volume Should Not Be More Than 50Ml. • Should Be Able To Run Maximum Of 40 Samples. • Option For Multichannel Compatible Combs. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use – Part 1: En61010-1: 2001, General Requirements Following The Provisions Of Directives 73 / 23 / Eec ( Low Voltage ) And 89 / 336 / Eec ( Emc ) As Amended By 93 / 68 / Eec ( Ce Marking ) . Midi Gel Electrophoresis:The Horizontal Electrophoresis Unit Must Include 10X10cm Tray And 7X7 Cm Tray • Gel Trays Should Be Uv Transparent. • Lid And Cables Should Be Separate And Must Not Be Attached. • Bromophenol Blue Migration Should Be Approx 4-5Cm / H At 90V. • Run Time Should Be 45-60 Min At 90. • Should Include 1 Mm Thick 2 Combs Of 16 Sample Wells. • Buffer Volume Should Not Be More Than 300Ml. • Tank Of The System Should Be Single Moulded To Ensure Leak Proof Buffer Tank. Even The Parts Should Also Be Single Molded That Are Easy To Repair And Replace. • 16 Sample Combs Should Have 16 ?L Sample Capacity In Each Well. • The Electrodes Should Not Be Attached To The Tank And Should Be Cassette Type Electrodes For Easy Repair And Replacement. • Should Have Pure Platinum Wire And Gold Plated Corrosion Resistant Electrodes. • Should Include Casting Dams For Tape Free Casting Of Gels. • Should Include Loading Guides For Easy Identification Of Wells. • Should Have Color Coded Combs Option And Should Have Options For 0.75Mm, 1Mm, 1.5Mm And 2Mm Combs. • It Should Support Widest Range Of Combs To Run Up To 100 Samples. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use – Part 1: En61010-1: 2001, General Requirements Following The Provisions Of Directives 73 / 23 / Eec ( Low Voltage ) And 89 / 336 / Eec ( Emc ) As Amended By 93 / 68 / Eec ( Ce Marking ) . Power Pack• The Power Pack Should Be From A Reputed Manufacturer. • It Must Have 5-300V, 1-700Ma And 150W With 1V / 1Ma Increment. • Should Be Capable Of Running At Constant Current Constant Voltage. • Power Supply Should Have 5 Pair Of Output To Connect 5 Units All Together In The Same Unit. • It Should Be Programmable To Set Different Programs. • Display Should Be 2.4” Lcd Display. •It Must Include Preset Programs And Must Have 6 Steps With 30 Programmable Files. • Should Have Timer To 999 Minutes And Timer Alarm Too After The End Of Run. • When Target Constant Mode Is Set, The System Automatically Adjusts The Two Other Parameters To Maximum To Allow For A Constant Run. • Safety Feature: No Load Detection, Leakage Detect, Over Load Detection, Over Temperature Protection, & Sudden Load Change Detection. • Operating Temperature 4?~ 40?. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use – Part 1: En61010-1: 2001, General Requirements Following The Provisions Of Directives 73 / 23 / Eec ( Low Voltage ) And 89 / 336 / Eec ( Emc ) As Amended By 93 / 68 / Eec ( Ce Marking ) .

Refer document

INR 6000.0 /-

Refer document