11700.00 Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Up To 50M Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work As Per Ss - 20 B ( Apss 308 ) - Ordinary Soils-Mechanical Means -Up To 3 M Depth Earth Work In Ordinary Soil, M Earth Work In Ordinary Soil, Mechanical Means Upto 3.00M Depth 18000.00 Clearing Thorny Jungle Clearing Thorny Jungle Clearing Thorny Jungle 4900.00 Filling With Excavated Earth ( Excluding Rock ) / Sand In Trenches, Sides Of Foundations And Basement With Initial Lead In Layers Not Exceeding 15 Cm Thick, Consolidating Each Deposited Layer By Watering And Ramming Including Cost And Conveyance Of Water To Work Site And All Operational, Incidental, Labour Charges, Hire Charges Of T And P Etc., Complete For Finished Item Of Work. ( Apss No. 309 And 310 ) ( Excluding Cost Of Sand ) - By Manual Means Filling With Excavated Earth ( Filling With Excavated Earth ( Excluding Rock ) / Sand In Trenches, Sides Of Foundations And Basement - 1200.00 Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Up To 50M Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work As Per Ss - 20 B ( Apss 308 ) - Ordinary Soil-Manual Means -Up To 3 M Depth Earth Work In Ordinary Soil, M Earth Work In Ordinary Soil, Manual Means Upto 3.00M Depth 1160.00 Cement Concrete 1:4:8 With 40 Mm Size Crushed Granite Metal Of Approved Hard Quality In Foundations Or Plinths Etc., Complete ( But Excluding Cost Of Cement ) - With Concrete Mixer Cement Concrete 1:4:8 With 40 Cement Concrete 1:4:8 With 40 Mm Size Cg Metal With Concrete Mixer In Foundations Or Plinth Etc., 35.00 Cement Concrete 1:2:4 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Inclusive Of Shuttering / Centering Charges For Bed Blocks, Encasing Joists / Rails, Holdfasts Of Doors And Windows, Etc. Complete ( But Excluding Cost Of Cement ) - With Concrete Mixer ( Ca : 0.90 Cum, Fa:0.45Cum ) Cement Concrete 1:2:4 With 20M Cement Concrete 1:2:4 With 20Mm Down Size Cg Metal For Bed Blocks, Encasing Joists / Rails, Holdfasts 2960.00 Cement Concrete 1:3:6 With 40Mm Down Size ( 50% Of 40-20Mm, 30% Of 20-10Mm And 20% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Vibrating, Etc., Complete For Finished Item Of Work As Directed For Side Walls Of Drains Or Basement / Substructure Of The Buildings ( Excluding Cost Of Cement, Centering And Shuttering Charges ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Cement Concrete 1:3:6 With 40M Cement Concrete 1:3:6 With 40Mm Down Size Cg Metal For Side Walls Of Drains Or Basement / Substructur 745.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Column Footings / Raft. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Column Footings / Raft 310.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Columns. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Columns 460.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Plinth Beams / Brace Beams. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Plinth Beams / Brace Beams 35.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Lintels. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Lintels 18.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Sunshades. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Sunshades 450.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Roof Beams. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Roof Beams 360.00 Labour Charges For Cutting, Bending And Binding Reinforcement With Contractors Binding Wire, And Placing In Position As Directed By Engineer - In - Charge Including All Leads, Etc., Complete Labour Charges For Cutting, Be Labour Charges For Cutting, Bending And Binding Reinforcement With Contractors Binding Wire 700.00 Providing Rcm Screen Wall ( Parada Wall ) / Rcm Drop Walls 50Mm Thick In Cm1:3 Including Steel Reinforcement With 6Mm Dia @ 150Mm C / C Both Ways And Rabbit Wire Mesh Of 24 Gauge 2 Layers Including Necessary Centering Charges Including Cost And Conveyance Of All Materials, All Labour Charges Including Tying Rabbit Wire Mesh To The Steel Reinforcement Applying Mortar Lumps, Finishing Plastering 12Mm In 2 Coats Of Cm 1:4 And Cm 1:2 On Both Faces, Sponge Finishing, All Operational And Incidental Charges, Curing Etc., But Excluding Cost Of Steel And Its Fabrication Charges And Cost Of Cement ) Complete For Finished Item Of Work As Directed. Providing Rcm Screen Wall ( Par Providing Rcm Screen Wall ( Parada Wall ) / Rcm Drop Walls 50Mm Thick In Cm1:3 620.00 Providing And Fixing Of Rcc 1:2:4 Precast Shelves 25Mm Thick With 6Mm Dia Ms Reinforcement At 125Mm C / C Both Ways With 10Mm Size Crushed Granite Metal Of Approved Hard Quality Without Brackets, Including Necessary Centering Charges And Plastering With Cm 1:3, 12Mm Thick Etc., But Excluding Cost Of Steel And Cost Of Cement ) Complete As Directed. ( Cost Of Fabrication Of Reinforcement Included ) Providing And Fixing Of Rcc 1: Providing And Fixing Of Rcc 1:2:4 Precast Shelves 25Mm Thick 675.00 Reinforced Cement Concrete M-20 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) . Cement @ 350Kg / Cum Of Concrete Is To Be Used. - For Roof Slab - Up To 150Mm Thick. M-20 Design Mix Concrete For R M-20 Design Mix Concrete For Rcc Roof Slab- Up To 150Mm Thick. 4450.00 Extra Lifts For Plastering Material And For Scaffolding / Centering Material - In 1St Floor Extra Lift Charges For Plaster Extra Lift Charges For Plastering In 1St Floor 1000.00 20 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 Up To 300 Mm In Width For Elevations And Drip Moulds Etc., - Raised Band ( But Excluding Cost Of Cement ) 20 Mm Thick Plain Cement Morta 20 Mm Thick Plain Cement Mortar Bands In Cm 1:4 Up To 300 Mm In Width, Drip Moulds Etc., 2570.00 Providing Gultha In Cm 1:6, 20 Mm Thick And 150 Mm Wide Including Necessary Scraping Of Wall And Finishing The Surface As Directed ( But Excluding Cost Of Cement ) Providing Gultha In Cm 1:6 In Providing Gultha In Cm 1:6 In Two Coats, 150Mm Wide. 295.00 Roofing / Side Sheeting With Pre-Painted Galvalume Trapezoidal Profile Roofing Sheets With 0.50Mm Thickness, Coating: Alu-Zinc Coating Az150 Gsm. Tensile Strength: 550 Mpa. Paint Coating: Regular Modified Polyester Painting. Painting Thickness ( Top ) : 18 To 20 Microns, ( Bottom ) : 5 To 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters With Regular Range Colours Fixed With Suitable Bolts, Nuts And Washers, Including Fixing Of Wind Ties As Per The Requirement Etc., And Including Cost And Conveyance Of All Materials Etc., Complete ( With / Without Ridges / Valley Gutters ) For Finished Item Of Work As Directed. ( Cost Of Wind Ties And Its Fabrication Charges Are Not Included ) Roofing / Side Sheeting With 0 Roofing / Side Sheeting With 0.50Mm Thick Gi Pre-Painted Profiled Or Galvanised Aluminium Sheets 4980.00 Brushing Of Existing Concrete Surface With Wire Brush And Providing Cement Concrete 1:2:4 Screed Of An Average Thickness Of 20Mm Using 6Mm Size Crushed Granite Metal Of Approved Hard Quality, And Providing 2 Layers Of 24 Guage Rabbit Wire Mesh In The Cc Screed As Nominal Reinforcement And Plastering With Cm 1:4, 12Mm Thick Including Admixing Of Approved Impervious Water Proofing Compound As Per Manufacturers Specification Or @ 2% By Weight Of Cement And Finishing Smooth And Including Providing Slopes To Drain Off Water Etc., Complete As Directed ( But Excluding Cost Of Cement ) Screed Concrete With Cc 1:2:4, Screed Concrete With Cc 1:2:4, 20Mm Thick With 2 Layers 24 Gauge Rabbit Wire Mesh Including Plasteri 2150 Supplying And Fixing Gyp Board Suspended Regular Single Layer False Ceiling ( Gs-Mfsc-4.1As Per India Gypsum ) Using 12.5Mm Thick Gyp Board Conforming To Is 2095-1993 Fixing To Gyp Steel Gi Perimeter Channels Of Size 20Mm X27mm X30mm ( Web ) Of 0.55Mm Thick Screws Fixed To Brick Work / Partition At 610Mm C / C And Suspending The Frame Work Using Intermediate Channels ( 45Mm X15mm X15mm X0.9Mm ) From Soffit At 1220Mm C / C With Ceiling Angle ( 25Mm X10mm X0.55Mm ) Fixed With Gi Cleat And Steel Expansion Fasteners And Connecting Clip To The Ceiling Channels ( With Knurled Web Of 51.5Mm X26mm X10.5Mm X0.55Mm ) Fixed In Direction Perpendicular To The Intermediate Channel At 457Mm C / C And Fixing The 12.5Mm Tapered Edge Gypboard With 25Mm Drywall Screws At 230Mm C / C And Jointing And Finishing Using Joint Compound And Paper Tape To Have A Flush Look Including Filling The Tapered And Square Edges With Jointing Compound, Two Coats Of Drywall Topcoat Complete For Finished Item Of Work As Per India Gypsum Ltd Specification. - For Flat Surfaces S&F Gypboard False Ceiling Usi S&F Gypboard False Ceiling Using 12.5Mm Thick Gypboard With Gi Frame Work. 72 Supply And Fixing Minimum Of 25Mm To 30Mm Thick Polished Black Kadapa Single Slab Of Required Size As Directed By The Engineer-In-Charge With Exposed Faces Square Cut And Well Polished, On Existing Walls, With Grey Cement Slurry Of Honey Like Consistency Spread At The Rate Of 3.30Kg. / Sqm. Including Cost And Conveyance All Materials And Water To Work Site And All Operational, Incidental, Labour Charges, Dressing And Fixing Of Stones In Position Rubbing Curing Etc., Complete For Shelves As Directed ( But Excluding Cost Of Cement ) S&F Min 25Mm To 30Mm Thick Pol S&F Min 25Mm To 30Mm Thick Polished Black Kadapa Single Slab For Kitchen Platforms / Window Sills. 300 Flooring 30Mm Thick With Cc 1:2:4 Using 10Mm Size Crushed Granite Metal Of Approved Hard Quality On Existing Concrete Base, Rendering Smooth Complete. ( But Excluding Cost Of Cement ) Flooring With Cc 1:2:4, 30Mm T Flooring With Cc 1:2:4, 30Mm Thick, On Existing Concrete Base Rendered Smooth. 1810 Flooring 40Mm Thick With Cc1:2:4 Using 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10 - 4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality On Existing Concrete Base, Rendering Smooth Complete. ( But Excluding Cost Of Cement ) Flooring With Cc 1:2:4, 40Mm T Flooring With Cc 1:2:4, 40Mm Thick, On Existing Concrete Base Rendered Smooth. 1360 Providing Plinth Protection Work With 50Mm Thick Cc 1:3:6 Using 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10 - 4.75Mm ) Graded Crushed Granite Metal Together With A Bed Of 75Mm Thick Cc 1:5:10 Using 40Mm Crushed Granite Metal Well Rammed, Consolidated Including Finishing The Top Smooth Duly Maintaining The Required Slopes To Drain Off Water As Per Site Conditions Including Cost And Conveyance Of All Materials To Site Of Work, All Labour, Operational, And Incidental Charges And Necessary Side Support For Concrete While Laying Etc., Complete For Finished Item Of Work ( To A Total Thickness Of 125Mm ) . ( But Excluding Cost Of Cement ) Using Machine Mixing Plinth Protection With 50Mm Th Plinth Protection With 50Mm Thick Cc 1:3:6, And 75Mm Thick Cc 1:5:10. 375 Flooring With Non-Skid Ceramic Floor Tiles Of Size 400 X 400 Mm And Thickness Between 7-8 Mm 1St Quality Conforming To Is:13711, Is:13712, Is:13630 ( Parts 1 To 15 ) Of Any Colour And Finish In All Shades And Designs, Set Over Base Coat Of Cement Mortar ( 1:6 ) , 12 Mm Thick Over Cc Bed Already Laid Or Rcc Roof Slab, Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3.Kgs Per Sqm And Jointed Neatly With White Cement Paste To Full Depth Mixed With Pigment Of Matching Shade, Including Cost And Conveyance Of All Materials, Labour Charges Etc., Complete For Finished Item Of Work, ( But Excluding Cost Of Cement ) Flooring With Non-Skid Cerami Flooring With Non-Skid Ceramic Floor Tiles Of Size 400 X 400 Mm And Thickness Between 7-8 Mm 1475 Providing Dadooing To Walls With Ceramic Wall Tiles Of Size 300X450mm / 320Mm X 400 Mm And Thickness 6 Mm 1St Quality Conforming To Is:13711, Is:13712, Is:13630 ( Parts 1 To 15 ) Of Any Colour And Finish In All Shades And Designs, Set Over Base Coat Of Cm ( 1:3 ) 12 Mm Thick With Cement Slurry Of Honey Like Consistency Spread At The Rate Of 3.30 Kgs Per Sqm And Jointed With White Cement Paste Mixed With Pigment Of Matching Shade To Full Depth, Including Cost And Conveyance Of All Materials, Labour Charges Etc., Complete For Finished Item Of Work, ( But Excluding Cost Of Cement ) Providing Dadooing To Walls Wi Providing Dadooing To Walls With Ceramic Wall Tiles Of Size 300X450mm / 320Mm X 400 Mm And Thickness 3000 Flooring With Double Charged / Multi Charged Stain Free Vitrified Tiles With Double Layer Pigment Of Size 600 X 600 Mm And Thickness Between 8-10 Mm 1St Quality Conforming To Is:15622-2017, Is:13630 ( Parts 1 To 15 ) Of Any Colour And Finish In All Shades And Designs, Set Over Base Coat Of Cement Mortar ( 1:6 ) , 12 Mm Thick Over Cc Bed Already Laid Or Rcc Roof Slab, Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3.Kgs Per Sqm And Jointed Neatly With White Cement Paste To Full Depth Mixed With Pigment Of Matching Shade, Including Cost And Conveyance Of All Materials, Labour Charges Etc., Complete For Finished Item Of Work, ( But Excluding Cost Of Cement ) Note :- The Same Rate Is Applicable For Skirting / Risers Flooring With Double Charged / Flooring With Double Charged / Multi Charged Stain Free Vitrified Tiles With Double Layer Pigment Of 415 Providing High Strength Cement Concrete Terrazzo / Pre-Polished / Chequered Step Tiles With Edge Rounded And Grooved Conforming To Is: 13801 Using Aggregates, Cement, Pigments Of Any Premium Colour, Design And Of 25 Mm Thickness In Foot-Path And Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, On 20 Mm Thick Bed Of Cement Mortar 1:4 Including Cost Of Cement Mortar Bed And Conveyance Of All Materials To Site, Labour And Other Operational Charges Etc., Complete As Directed ( Excluding Cost Of Cement ) Providing High Strength Cement Providing High Strength Cement Concrete Terrazzo / Pre-Polished / Chequered Step Tiles With Edge Round 1200 Supply And Fixing Door Frame Of 100 X75mm With Medium Teak Wood Including Supply And Fixing With 6Nos. M.S.Z Type Hold Fasts Made Out Of 50X3mm M.S.Flat 300Mm Long In Cc Beds, Etc., Complete. ( Excluding Cost Of Bed Blocks. ) S / F Door Frame Of 100 X75mm, M S / F Door Frame Of 100 X75mm, Medium Teak Wood Including 6Nos. M.S.Z Type Hold Fasts In Cc Beds. 510 Providing And Fixing Pvc Door Frame Of The Size 50X47mm With A Wall Thickness Of 5Mm, Made Out Of Extruded 5Mm Rigid Pvc Foam Sheet, Mitre Cut At Two Corners And Joined With 2Nos. Of 150Mm Long Brackets Of 15X15mm M.S Square Tube. The Two Vertical Door Profiles Are To Be Reinforced With 19X19mm Ms Square Tube Of 19 Gauge. The Door Frame Shall Be Fixed To The Wall Using 65 / 100Mm Long Ms Screws Through The Frame By Using Pvc Fasteners. A Minimum Of 4Nos. Of Screws To Be Provided For Each Vertical Member And Minimum 2Nos. For Horizontal Member Etc. Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge For Finished Item Of Work As Per Approved Make S&F Pvc Door Frame Of Size 50X S&F Pvc Door Frame Of Size 50X47 With Wall Thickness Of 5Mm Made Out Of Extruded 5Mm Rigid Pvc Sheet 500 Supplying And Fixing Of Unplasticised Poly Vinyl Chloride ( Upvc ) 3 Track Sliding Windows With Mesh Shutter €“ ( 2-Glass Shutters And 1-Mesh Shutter ) Duly Manufactured Using Upvc Reinforced Profiles ( Composition Of Profile Shall Consists A Minimum Of 5.5 Phr Of Tio2 And Not More Than 12 Phr Of Caco3 For Every 100 Parts Of Pvc Resin ) Of ( 94 X 45Mm ) / ( 80X 52Mm ) X 2.20Mm For Outer Frames, ( 58X 39Mm ) / ( 54X 38Mm ) X 2.20Mm For Sliding Shutter Frames Capable Of Mounting Single Glazing System Structurally Reinforced With Hot Dip Galvanized Up To 50 Microns Of Minimum Thickness Of 1.0 / 1.2Mm Prefabricated And Welded Through Fusion Welding. The Window Sash Shall Be Fitted With 5 Mm Thick Clear Float Glass Of Reputed Make And Mesh Shutter Frame Shall Be ( 42X 25Mm ) / ( 52X 21.5Mm ) X 2.0Mm Fitted With Vinyl Coated Fiber Mesh- On Rollers / Pulley Duly Fixed With Grey Colour Tpv Gasket For Sash And Glazing Bead Shall Be Co-Extruded With Grey Colour Soft Pvc. System Shall Have Single Point Locking With Touch Lock And The System Is To Be Installed At The Site Using Anchor Fasteners, Silicon Rubber Sealant, Easy Glazing / Deglazing At Site Etc., Including Cost And Conveyance Of All Materials, Accessories, Labour Charges For Transportation, Erection At Site Complete For Finished Item Of Work. Supplying And Fixing Of Unplas Supplying And Fixing Of Unplasticised Poly Vinyl Chloride ( Upvc ) 3 Track Sliding Windows With Mesh S 370 Supply And Fixing Of Bed Room Cupboard Using Teak Wood Frames And Teak Veneered Decorative Plywood Conforming To Is:1328 Shutters As Per The Approved Drawing With The Following Components. 1 ) . The Frame Is Of Size 100Mm X 30Mm With Teak Wood. The Frame Is Fixed To The Wall By Means Of Screws Of Size 100Mm. 2 ) . The Openable Shutters Are Made Of 9 Ply - 12 Mm Thick Both Sides Teak Veneered Decorative Plywood Conforming To Is:1328 Shutters Are To Be Fixed To The Frame By Means Of Heavy Duty Ms Powder Coated Piano Hinges. 3 ) . Sliding Shutters Are Made Of 5 Ply - 9 Mm Thick One Side Teak Veneered Decorative Plywood Conforming To Is:1328. Shutters Are To Be Fitted In The Aluminium Track Of Size 32Mm X 6Mm By Using Nickle Coated Sliding Rollers Of Suitable Size. 4 ) . The Cost Is Inclusive Of M.S. Powder Coated Piano Hinges ( Is 3818 ) , Nickle Coated Sliding Rollers, Magnetic Catches, Hasp And Staple 2 Nos, Aluminium Anodised Tower Bolts ( Is 204 ) , Handles ( Is 208 ) , Etc., Complete. Supply And Fixing Of Bed Room Supply And Fixing Of Bed Room Cupboard Using Teak Wood Frames And Teak Veneered Decorative Plywood C 275 Supply And Fixing Of Living Room / Hall Cupboard Using Using Teak Wood Frames And Teak Veneered Decorative Plywood Conforming To Is:1328 Shutters As Per The Approved Drawing With The Following Components. 1 ) . The Frame Is Of Size 100Mm X 30Mm With Teak Wood. The Frame Shall Be Fixed To The Wall By Means Of Screws Of Size 100Mm. 2 ) . The Openable Shutters Are Made Of 9 Ply - 12 Mm Thick Both Sides Teak Veneered Decorative Plywood Conforming To Is:1328 . Shutters Are To Be Fixed To The Frame By Means Of Heavy Duty Ms Powder Coated Piano Hinges. 3 ) . 5Mm Thick Glass Sliding Shutters In Middle Top. 4 ) . Sliding Shutters Are Made Of 5 Ply - 9 Mm Thick One Side Teak Veneered Decorative Plywood. Shutters Are To Be Fitted In The Aluminium Track Of Size 32Mm X 6Mm By Using Nickle Coated Sliding Rollers Of Suitable Size. 5 ) . The Cost Is Inclusive Of M.S. Powder Coated Piano Hinges ( Is 3818 ) , Nickle Coated Sliding Rollers, Magnetic Catches, Hasp And Staple 2Nos, Handles ( Is 208 ) , Etc., Complete. Note : Open Areas Within Cupboard Shall Not Be Measured For Payment. Supply And Fixing Of Living Ro Supply And Fixing Of Living Room / Hall Cupboard Using Using Teak Wood Frames And Teak Veneered Dec 45 Supply And Fixing Flush Door Shutters, Solid Bond Wood Block Board Type With Teak Ply On Both Faces.: 35 Mm Thick Conforming To Is:2202 As Per Approved Make Including The Following Aluminium Anodised Fittings : Conforming To Relevant Is Standards : Single Shutter A ) 3 Nos. 150 Mm Long Butt Hinges. ; B ) 1 Nos. 200 Mm To 250 Mm Long Tower Bolt With 10Mm Dia Shoot. C ) 2No.Of 300Mm Long Aldrop With 16Mm Dia Rod. D ) 2 No. 100 Mm To 150 Mm Long Grip Handle. E ) 1 No. Foot Door Stopper With Brass Clip. S&F 35Mm Thick Flush Door Sing S&F 35Mm Thick Flush Door Single Shutter, Solid Bond Wood, Teak Ply On Both Faces- Aluminium Fitting 325 Supply And Fixing Flush Door Shutters, Solid Bond Wood Block Board Type With Teak Ply On Both Faces.: 30 Mm Thick Conforming To Is:2202 As Per Approved Make Including The Following Aluminium Anodised Fittings : Conforming To Relevant Is Standards : Single Shutter A ) 3 Nos. 150 Mm Long Butt Hinges. B ) 2 Nos. 200 Mm To 250 Mm Long Tower Bolt With 10Mm Dia Shoot. ; C ) 1 No. 300Mm Long Aldrop With 16Mm Dia Shoot. D ) 2 No. 100 Mm To 150 Mm Long Grip Handle. E ) 1 No. Foot Door Stopper. S&F 30Mm Thick Flush Door Sing S&F 30Mm Thick Flush Door Single Shutter, Solid Bond Wood, Teak Ply On Both Faces- Aluminium Fitting 4350 White Washing To New Walls With Surya Cem / Equivalent Cem Two Coats Complete For Finished Item Of Work. White Washing To New Walls Wit White Washing To New Walls With Surya Cem / Equivalent Cem Two Coats 1900 Oil Bound Distempering To New Walls With 2 Coats Of Approved Make Distemper Over A Base Coat Of Grade -1 Primer ( Making 3 Coats In All ) Complete For Finished Item Of Work. Obd To New Walls 2 Coats With Obd To New Walls 2 Coats With Over A Base Coat Of Grade -1 Primer Making 3 Coats 7500 Providing Superior Quality Wall Care Putty 2 Coats For Internal / External Walls Complete For Finished Item Of Work. Providing Superior Quality Wal Providing Superior Quality Wall Care Putty 2 Coats For Internal / External Walls 8920 Plastic Emulsion Painting To New Internal Walls With Paint Of Approved Make With 2 Coats Over A Base Coat Of Grade -1 Primer ( Making 3 Coats In All ) Complete For Finished Item Of Work - For Internal Walls Plastic Emulsion Painting To N Plastic Emulsion Painting To New Internal Walls 2 Coats Over A Base Coat Of Grade -1 Primer Make Mak 9900 Acrylic Exterior Emulsion Painting To New Walls With Grade-I I.E., Apex Or Equivalent Paint Of Approved Make 2 Coats Over A Base Coat Of Grade -Ii Primer ( Making 3 Coats In All ) Complete For Finished Item Of Work For External Walls Acrylic Exterior Emulsion Pain Acrylic Exterior Emulsion Painting To New Walls With Grade-I Paint 2 Coats & Grade -Ii Primer Make M 10000 Fabrication Of Steel Works Like Compound Wall Gates, Ms Fencing Posts On Ground Or On Top Of Compound Wall, Cattle Trap , Ms Holding Down Bolts, Templates, In Position Etc., Complete Including Cost Of Welding Rods, Power Charges Etc., Complete. Fabrication Of Compound Wall G Fabrication Of Compound Wall Gates, Ms Fencing Posts, Ms Holding Down Bolts, Etc. 10000 Erection Of Compound Wall Gates, Ms Fencing Posts On Ground Or On Top Of Compound Wall, Cattle Trap , Ms Holding Down Bolts, Templates, In Position Etc., Complete Erection Of Compound Wall Gate Erection Of Compound Wall Gates, Ms Fencing Posts, Cattle Trap, Ms Holding Down Bolts, Etc. 210 Supply And Fixing Of Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Crca Laths, Interlocked Together Through Their Entire Length And Jointed Together At The Ends By End-Locks, Mounted On Specially Designed Pipe Shaft Of 50Mm Diameter Nominal Bore Ms B Class Pipe With Brackets, Plates, Guide Channels, Stoppers, Bottom Locking Plates And Arrangements For Inside And Outside Locking With Push-Pull Operations Including Cost Of Hood Cover And Springs Complete, Painted With One Coat Of Approved Steel Primer, Locks, Ball Bearings, All Accessories Etc Complete For Finished Item Of Work As Per Special Spec: 1108 S & Fixing Of Rolling Shutters S & Fixing Of Rolling Shutters Made Of 80X1.25Mm Machine Rolled Crca Laths With All Fittings. 600 Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) Conforming To Din Standards 8077 / 8078 Including Transportation Of Material To Anywhere In The State And Including Fixing Necessary Fittings Like Bends, Plugs, Couplers, Junctions, Tees, Etc With Welding The Joint As Per Standard Practice Cost Of Specials Will Be Paid Separately. ( Excluding Taxes ) - 63Mm X 5.8Mm Dia Supplying, Laying, Jointing, W Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) - 63Mm X 5.8Mm 1000 Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) Conforming To Din Standards 8077 / 8078 Including Transportation Of Material To Anywhere In The State And Including Fixing Necessary Fittings Like Bends, Plugs, Couplers, Junctions, Tees, Etc With Welding The Joint As Per Standard Practice Cost Of Specials Will Be Paid Separately. ( Excluding Taxes ) - 32Mm X2.9Mm Dia Supplying, Laying, Jointing, W Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) - 32Mm X2.9Mm D 400 Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) Conforming To Din Standards 8077 / 8078 Including Transportation Of Material To Anywhere In The State And Including Fixing Necessary Fittings Like Bends, Plugs, Couplers, Junctions, Tees, Etc With Welding The Joint As Per Standard Practice Cost Of Specials Will Be Paid Separately. ( Excluding Taxes ) - 25Mm X2.3Mm Dia Supplying, Laying, Jointing, W Supplying, Laying, Jointing, Welding, Fixing And Commissioning Of Ppr Pipes ( Pn-10 ) - 25Mm X2.3Mm D 200 Supply Of 63Mm Ppr Socket Conforming To Din Standards 8077 / 8084 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm Ppr Socket Supply Of 63Mm Ppr Socket 400 Supply Of 32Mm Ppr Socket Conforming To Din Standards 8077 / 8084 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr Socket Supply Of 32Mm Ppr Socket 100 Supply Of 25Mm Ppr Socket Conforming To Din Standards 8077 / 8084 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 25Mm Ppr Socket Supply Of 25Mm Ppr Socket 200 Supply Of 63Mm Ppr Elbow Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm Ppr Elbow Supply Of 63Mm Ppr Elbow 200 Supply Of 25Mm Ppr Elbow Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 25Mm Ppr Elbow Supply Of 25Mm Ppr Elbow 600 Supply Of 32Mm Ppr Elbow Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr Elbow Supply Of 32Mm Ppr Elbow 100 Supply Of 63Mm Ppr Tee Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm Ppr Tee Supply Of 63Mm Ppr Tee 200 Supply Of 25Mm Ppr Tee Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 25Mm Ppr Tee Supply Of 25Mm Ppr Tee 400 Supply Of 32Mm Ppr Tee Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr Tee Supply Of 32Mm Ppr Tee 100 Supply Of 63Mm Ppr End Cap Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm Ppr End Cap Supply Of 63Mm Ppr End Cap 100 Supply Of 32Mm Ppr End Cap Conforming To Din Standards 8077 / 8084 To 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr End Cap Supply Of 32Mm Ppr End Cap 100 Supply Of 32Mm X25mm Ppr Reducer Conforming To Din Standards 8077 / 8084 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm X25mm Ppr Reduc Supply Of 32Mm X25mm Ppr Reducer 100 Supply Of 63Mm X 32Mm Ppr Reducer Conforming To Din Standards 8077 / 8084 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm X 32Mm Ppr Redu Supply Of 63Mm X 32Mm Ppr Reducer 100 Supply Of 63Mm X 32X63mm Ppr Reducer Tee Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 63Mm X 32X63mm Ppr R Supply Of 63Mm X 32X63mm Ppr Reducer Tee 100 Supply Of 32Mm X 25Mm X 32Mm Ppr Reducer Tee Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm X 25Mm X 32Mm P Supply Of 32Mm X 25Mm X 32Mm Ppr Reducer Tee 40 Supply Of 25Mm Ppr Union Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 25Mm Ppr Union Supply Of 25Mm Ppr Union 60 Supply Of 32Mm Ppr Union Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr Union Supply Of 32Mm Ppr Union 40 Supply Of 32Mm Ppr Ball Valve Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) - For Supply Of 32Mm Ppr Ball Valve Supply Of 32Mm Ppr Ball Valve - For 100 Supply Of 25Mm Ppr Clamp Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 25Mm Ppr Clamp Supply Of 25Mm Ppr Clamp 100 Supply Of 32Mm Ppr Clamp Conforming To Din Standards 8077 / 8092 Including Transportation Of Material To Anywhere In The State ( Excluding Taxes ) Supply Of 32Mm Ppr Clamp Supply Of 32Mm Ppr Clamp 100 Construction Of 900Mm Dia And 450Mm Depth Circular Manhole With Cc 1:4:8 Base Of 150Mm Thick With 40 Mm Crushed Granite Metal, 225Mm Thick Brick Masonry Walls In C.M 1:6 With Flyash Bricks Of Size 225X100x60mm And Having Compressive Strength Of 50 Kg / Sqcm, Plastering With Cm 1:4, 12Mm Thick Including Rendering The Surfaces Smooth Both Inside And Outside And Benching With 100Mm Thick Cc 1:2:4 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal And Channelling To Required Slope Including Supply And Fixing Precast Rcc 1:2:4 Cover Of 50Mm Thick And 600Mm Dia Using 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal, Including Earth Work Excavation To The Required Depth Etc. Complete For Finished Item Of Work ( But Excluding Cost Of Cement, Steel And Its Fabrication Charges. ) Construction Of 900Mm Dia And Construction Of 900Mm Dia And 450Mm Depth Circular Manhole 600 Extra Depth Of Circular Man Hole Of Size 900Mm Dia ( Excluding Rock Cutting ) Beyond 450Mm Depth ( Excluding Cost Of Cement ) Extra For Every 0.100M ( 100Mm ) Depth Extra Depth Of Circular Man Ho Extra Depth Of Circular Man Hole Of Size 900Mm Dia Beyond 450Mm Depth Extra For Every 0.100M ( 100Mm ) 100 Construction Of 450Mm X 450Mm And 450Mm Depth Inspection Chamber With Cc 1:4:8 Base Of 150Mm Thick 40 Mm Crushed Granite Metal And 225 Mm Thick Brick Masonary Walls In Cm 1:6 With Fly Ash Bricks Of Size 225 X 100 X 60Mm With 50Kg / Sq. Cm Compressive Strength And Plastering With Cm 1:4; 12Mm Thick Including Rendering The Surfaces Smooth Both Inside And Outside And Channelling To Required Slope Including Supply And Fixing Precast Rcc 1:2:4 Cover Of 50Mm Thick And 600 X 600Mm Size With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal, Including Earthwork Excavation To The Required Depth Etc; Complete For Finished Item Of Work ( But Excluding Cost Of Cement Steel And Its Fabrication Charges. ) Construction Of 450Mm X 450Mm Construction Of 450Mm X 450Mm And 450Mm Depth Inspection Chamber 300 Extra Depth Of 450Mm X 450Mm Inspection Chamber Beyond 450Mm Depth ( Excluding Cost Of Cement ) Extra For Every 0.100M ( 100Mm ) Depth Extra Depth Of 450Mm X 450Mm I Extra Depth Of 450Mm X 450Mm Inspection Chamber Beyond 450Mm Depth - Extra For Every 0.100M ( 100Mm ) 60 Supplying And Fixing 580 X 440Mm Orissa Pan White Glazed W.C First Quality Isi Marked Conforming To Is 2556 - Part 3- 2004 With P Or S Trap Supplying And Fixing 580 X 440 Supplying And Fixing 580 X 440Mm Orissa Pan White Glazed W.C First Quality With P Or S Trap 20 Supplying And Fixing Wash Down European Water Closet Of First Quality Conforming To Is 2556-Part-2-2004 Of White Glazed With S Trap. Plastic Seat And Lid Is To Be Paid Extra. Supplying And Fixing Wash Down Supplying And Fixing Wash Down European Water Closet Of First Quality With S Trap. 80 Supply And Fixing Of Pvc Low Level Cistern With Internal Components And Short Bend 10 Ltrs Capacity Single Flush Supply And Fixing Of Pvc Low L Supply And Fixing Of Pvc Low Level Cistern With Internal Components And Short Bend 10 Ltrs Capacity 80 Supplying And Fixing Indian Make Flat Back Wash Hand Basin 1St Quality Conforming To Is: 2556 - Part-4:1972 With Waste Fittings Like 32Mm Nominal Size C.P. Fitting With Parallel Pipe Thread Conforming To Is:2963-1979 And Fitted With 15Mm Nominal Bore Chromium Plated Pillar Tap Of 1St Quality Indian Make 400Grams Seiko / Senior / Nice / Esso Or Equivalent Complete With Standard Ci Brackets Including Wooden Block: 550X400mm - Single C.P. Pillar Cock Supplying And Fixing Indian Ma Supplying And Fixing Indian Make Flat Back Wash Hand Basin 400Grams 550X400mm - Single C.P. Pillar 118 Supply And Fixing 30 Mm Nominal Size Dia Pvc Flexible Waste Pipe Of 914.4 Mm Length Of Ist Quality Supply And Fixing 30 Mm Nomina Supply And Fixing 30 Mm Nominal Size Dia Pvc Flexible Waste Pipe Of 914.4 Mm Length Of Ist Quality 120 Supplying And Fixing Cp Finish Brass Body 32 Mm Dia Nominal Size Waste Coupling With Half / Full Thread And Brass Check Nut Conforming To Is 2963: 1979 Supplying And Fixing Cp Finish Supplying And Fixing Cp Finish Brass Body 32 Mm Dia Nominal Size Waste Coupling With Half / Full Thr 80 Supplying And Fixing Tv Shape Mirror With Plastic Frame Size 609.6X457.2Mm Supplying And Fixing Tv Shape Supplying And Fixing Tv Shape Mirror With Plastic Frame Size 609.6X457.2Mm 300 Supplying And Fixing 15Mm Pvc Connection With Brass Union Nut C.P Coated Supplying And Fixing 15Mm Pvc Supplying And Fixing 15Mm Pvc Connection With Brass Union Nut C.P Coated 120 Supply Of Stainless Steel 4 Inches Dia Round Grating With Frame For Nahany Or Floor Trap Cover Supply Of Stainless Steel 4 In Supply Of Stainless Steel 4 Inches Dia Round Grating With Frame For Nahany Or Floor Trap Cover 400 S And F Of 15 Mm Brass Body Cp Finish Long Body Bib Tap Of Not Less Than 400 Grams Weight With Quarter Turn Spindle Internal / External Threaded Connection Conforming To Is 8931 S And F Of 15 Mm Brass Body Cp S And F Of 15 Mm Brass Body Cp Finish Long Body Bib Tap Of Not Less Than 400 Grams Weight With Quart 80 Supply And Fixing 15 Mm Cp Concealed Stop Valve Not Less Than 400 Grams Weight Quarter Turn Spindle Conforming To Is 8931 Supply And Fixing 15 Mm Cp Con Supply And Fixing 15 Mm Cp Concealed Stop Valve Not Less Than 400 Grams Weight Quarter Turn Spindle 100 Supplying, Laying, Fixing And Commissioning The Swr Pipes Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Swr Pipe ( As Per Isi - Standards ) Type - A Pipes ( Pvc / Swr Pipe - 4Kg / Sq.Cm ) For Rain Water And Vent Pipes Of Any Diameter Including Fixing Necessary Fittings Like Bends, Plugs, Couplers, Junctions, Tees, Etc With Solvent Jointing As Per Standard Practice Excluding Cost Of Fittings - For 110Mm Dia 3M Double Socket Pipe Supplying, Laying, Fixing And Supplying, Laying, Fixing And Commissioning The Swr Pipes Type - A Pipes ( Pvc / Swr Pipe - 4Kg / Sq 60 Supplying, Laying, Fixing And Commissioning The Swr Pipes Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Swr Pipe ( As Per Isi- Standards ) Type - B Pipes ( Pvc / Swr Pipe - 6 Kg / Sq.Cm ) For Soil And Sullage Water Of Any Diameter Including Fixing Necessary Fittings Like Bends, Plugs, Couplers, Junctions, Tees, Etc With Solvent Jointing As Per Standard Practice Excluding Cost Of Fittings. - For 110Mm Dia 3M Double Socket Pipe Supplying, Laying, Fixing And Supplying, Laying, Fixing And Commissioning The Swr Pipes Type - B Pipes ( Pvc / Swr Pipe - 6 Kg / Sq.C 100 Supply Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Upvc / Swr Pipe ( As Per Isi- Standards ) Fittings Like Bends, Tees, Ys, Etc., For Door Bend 87.5 Degrees.- 110Mm Dia Supply Of Upvc / Swr Pipe Fitti Supply Of Upvc / Swr Pipe Fittings Like Bends, Tees, Ys, Etc., For Door Bend 87.5 Degrees.- 110Mm Dia 40 Supply Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Upvc / Swr Pipe ( As Per Isi- Standards ) Fittings Like Bends, Tees, Ys, Etc., For Single Tee ( With Door ) - 110Mm Dia Supply Of Upvc / Swr Pipe Fitti Supply Of Upvc / Swr Pipe Fittings Like Bends, Tees, Ys, Etc., For Single Tee ( With Door ) - 110Mm Di 80 Supply Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Upvc / Swr Pipe ( As Per Isi- Standards ) Fittings Like Bends, Tees, Ys, Etc., For Door Bend 87.5 Degrees.-75Mm Dia Supply Of Upvc / Swr Pipe Fitti Supply Of Upvc / Swr Pipe Fittings Like Bends, Tees, Ys, Etc., For Door Bend 87.5 Degrees.-75Mm Dia 40000 Supplying And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank With Double Layer Approved Make And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet And Outlets And Over Flow Pipes But Without Fittings And Base Support For Tanks Supplying And Placing On Terra Supplying And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank With Double L 60 Supplying And Fixing Of Stainless Steel Finish Health Faucet With 1M Long Tube, Faucet Gun And Wall Hook Supplying And Fixing Of Stainl Supplying And Fixing Of Stainless Steel Finish Health Faucet With 1M Long Tube, Faucet Gun And Wall 600 Supplying, Laying, Jointing Rcc Np2 Hume Pipes ( Socket And Spigot ) Confirming To Is 458 / 2003, With Necessary Rubber Rings ( As Per Is 5382 / 1985 ) Cost And Conveyance Of All Materials To Site, Labour Charges, All Operational Charges Etc Complete As Directed For Finished Item Of Work For 200Mm Dia Pipes. Note - Transportation Of Pipes Includes Up To 5 Km From Factory. For Any Extra Lead, Necessary Extra Lead Charges May Be Added. Supplying, Laying, Jointing Rc Supplying, Laying, Jointing Rcc Np2 Hume Pipes ( Socket And Spigot ) - For 200Mm Dia Pipes 45000 Rate For Conveyance Of Rcc Socket And Spigot Pipes On All Weather Roading Including Loading Unloading And Stacking ( Per Metre Of Effective Length ) ( For Np2 Pipes ) . ( Rate For Every Additional 1 Km. Lead Or Part There Of Beyond 5Km Initial Lead Is Only Payable ) - For 200 Mm Dia Pipes Rate For Conveyance Of Rcc Soc Rate For Conveyance Of Rcc Socket And Spigot Pipes Including Loading Unloading And Stacking For Np2 60 Supply And Fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer Hardwyn Make ( Is: 3564 ) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete ( Type-3: For Width Of Doors 851Mm To 1000 Mm ) S And F Aluminium Hydraulic D S And F Aluminium Hydraulic Door Closer ( Type-3: For Width Of Doors 851 To 1000 Mm ) 120 Supply Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Upvc / Swr Traps ( As Per Isi- Standards ) - For 4 Inches ( 101.6Mm ) Nahani Trap ( With Jali With Inlet ) Supply Of Upvc / Swr Traps - F Supply Of Upvc / Swr Traps - For 4 Inches ( 101.6Mm ) Nahani Trap ( With Jali With Inlet ) 120 Supplying And Fixing 150Mm X100mm Swg Gully Traps Conforming To Is- 651 And 4127 With C.I Grating And Constg. Brick Masonry In Cm 1:6 Prop. Including Plastering And Fitted With 304.8Mm X288.6Mm ( 12 Inchesx9 Inches ) C.I Frame And Hinged Cover Including Earth Work Excavation ( Excluding Cost Of Cement ) Supplying And Fixing 150Mm X10 Supplying And Fixing 150Mm X100mm Swg Gully Traps 60 Supply And Fixing Of 15 Mm Brass Body Cp Finish Bib Cock Of Not Less Than 400 Grams Weight Screw Type ( Full Turn ) With Internal / External Threaded Connection Conforming To Is 8931 Supply And Fixing Of 15 Mm Bra Supply And Fixing Of 15 Mm Brass Body Cp Finish Bib Cock Of Not Less Than 400 Grams Weight Screw Typ 80 S And F Cp Finish Steel Towel Rod Of 600 Mm Long And 20 Mm Dia With Brackets S And F Cp Finish Steel Towel S And F Cp Finish Steel Towel Rod Of 600 Mm Long And 20 Mm Dia With Brackets 5000 Providing Anti- Termite Treatment ( Pre-Constructional Chemical Treatment Measures ) Along The Internal And External Vertical Faces Of The Columns, Plinth Beams / Brace Beams, Basement And Top Surface Of The Basement Filling Below Flooring Bed As Per The Specified Procedure Conforming To Is 6313 ( Part-2 ) 2001 And Other Relevant Approved Specification Duly Using Chlorpyriphos / Lindane Emulsifiable Concentrate 20% With 1% Concentration @ 7.5 Litres / Sqm Of The Vertical Surface And @ 5.0 Litres / Sqm Of The Horizontal Surface Of The Substructure To A Depth Of 500 Mm Around Columns And 300 Mm Deep Around Plinth Beams / Brace Beams, Basements And Floor Filling Area Including Excavation Channel Along The Wall And Rodding Etc And Cost And Conveyance Of All Materials To The Site, Cost Of Labour For Spraying, Rodding Etc Complete For Finished Item Of Work As Per The Approval Of The Engineer-In-Charge Providing Anti- Termite Treatm Providing Anti- Termite Treatment ( Pre-Constructional Chemical Treatment Measures ) 5908 Supply And Fixing Of 25Mm Dia, Heavy Guage Recessed / Concealed Isi Marked Pvc Conduit Pipe Along With Reinforcement Laid Into Wall / Slab With All Required Accessories Wherever Necessary Including Masonry Work For Circuit Main / Sub-Mains / 15 A Power Circuit / Telephone / Tv Points Complete S / F Of 25Mm Dia, Recessed / Con S / F Of 25Mm Dia, Recessed / Concealed Pvc Conduit Pipe Laid Into Wall / Slab With All Accessories For C 155 Supply And Fixing Of 32Mm Dia, Heavy Guage Pvc Conduit Pipe Concealed In Wall / Ceiling With All Required Accessories And Including Chiselling The Wall Wherever Necessary Including Masonry Work For Sub-Mains / Power Circuit / Telephone / Tv Points Complete S / F Of 32Mm Dia Pvc Conduit Pi S / F Of 32Mm Dia Pvc Conduit Pipe Concealed In Wall For Sub-Mains / Power Circuit / Telephone / Tv Point 1340 Supply And Wiring With Three Runs Of 1.0 Sq.Mm ( 14 / 0.3Mm ) 1100 V Grade P.V.C Insulated Flexible Copper Conductor Cable ( Phase, Neutral & Earth ) In The Existing P.V.C Conduit Pipe With 6A Flush Type Isi Marked Modular Type Switch / Bell Push With Gi Box And White Front Plate Concealed In Wall And Ceiling Rose / Slant Accessories As Necessary Complete For Light , Bell, Exhaust Fan Points ( Mds Type ) . Supply & Wiring With Three Run Supply & Wiring With Three Runs Of 1.0 Sq.Mm P.V.C Insulated Flexible Copper Conductor Cable With 6A 160 Supply And Wiring With Three Runs Of 1.0 Sq.Mm ( 14 / 0.3Mm ) 1100 V Grade Pvc Insulated Flexible Copper Conductor Cable ( Phase, Nuetral & Earth ) In The Existing P.V.C Conduit Pipe With 6A Flush Type Isi Marked Modular Type Control Switch, Modular 120W Step Type Electronic Hum Free Fan Regulator, Gi Box And White Front Plate Concealed In Wall Complete For Fan Pont ( Mds Type ) . S & Wiring With Three Runs Of S & Wiring With Three Runs Of 1.0 Sq.Mm Insulated Flexible Copper Conductor Cable 6A Flush Type Modu 160 Supply And Wiring With 3 Runs Of 1.0 Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Conductor Cable ( Phase, Nuetral & Earth ) In The Existing P.V.C Conduit Pipe With Modular Type 6A Isi Marked 5 Pin Pin Modular Type Socket With Modular Type 6A Switch Control And With Gi Box And White Front Plate Concealed In Wall Complete With All Accessories ( Fixing On Seperate Board ) ( Mds Type ) . S & Wiring With 3 Runs Of 1.0 S & Wiring With 3 Runs Of 1.0 Sq.Mm Flexible Copper Conductor Cable With 6A, 5 Pin Modular Type Sock 680 Supply And Fixing Of Isi Marked Modular Type 6A 5 Pin Modular Type Wall Plug Socket With Modular Type Type 6A Switch Control On A Common Board With Earth Continuity Including Gi Box And White Front Plate Including Wire Leads Earth Connections Complete S / F Of Modular Type 6A 5 Pin M S / F Of Modular Type 6A 5 Pin Modular Type Wall Plug Socket With Modular Type 6A Switch Control On A 20 Supply And Wiring With 3 Runs Of 1.0Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Conductor Cable ( Phase, Neutral & Earth ) In The Existing P.V.C Conduit Pipe With Modular Type 6A Isi Marked Modular Type Bell Push With Gi Box With Appropriate White Cover Plate Including Supply And Suitable Mounted Ding Dong Bell Of Approved Make And Type, Mounting For Bell Etc., Complete With All Accessories As Needed. ( Mds Type ) S & Wiring With 3 Runs Of 1.0S S & Wiring With 3 Runs Of 1.0Sq.Mm Copper Conductor Cable With Modular Type 6A Isi Marked Bell Push, 4000 Supply And Laying Of 3 Runs Of 4 Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Cable ( Phase, Neutral & Earth ) In Existing Metallic / Non -Metallic Conduit Pipe For Run Of Circuit / Power Mains Including Copper Lugs Complete S & Laying Of 3 Runs Of 4 Sq.M S & Laying Of 3 Runs Of 4 Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Cable In Existing Metalli 6300 Supply And Laying Of 3 Runs Of 2.5 Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Cable ( Phase, Neutral &Earth ) In Existing Metallic / Non - Metallic Conduit Pipe For Run Of Circuit / Power Mains Including Copper Lugs Complete S & Laying Of 3 Runs Of 2.5 Sq S & Laying Of 3 Runs Of 2.5 Sq.Mm 1100 V Grade Pvc Insulated Flexible Copper Cable In Existing Meta 40 Supply And Fixing Of 6 Way Tpn Double Door Distribution Board With Integral Bus Bar And Din Rail Concealed In Wall With Flexibility To Accept Any Combination Of Mcbs With 1 No 40A, 4 Pole, 100Ma Rccb, As Incomer And 9 Nos. Of 6 Amps Sp Mcbs And 2 Nos Of 16A Sp Mcb And 1 No 20 A Sp Mcbs In Sheet Metal Enclosure Including All Connections Chiselling Masonry Work Etc., ( Quarter In Side As Main Db ) S&F Of 4 Way Tpn Double Door D S&F Of 4 Way Tpn Double Door Distribution Board With Integral Bus Bar And Din Rail Concealed In Wall 60 Supplying, Laying And Connection Of 25X6mm Gi Earth Strips Including All Accessories Etc. Supplying, Laying And Connecti Supplying, Laying And Connection Of 25X6mm Gi Earth Strips Including All Accessories Etc. 1340 Supply And Fixing Of Isi Marked Flush Type 6A 5 Pin Plug Socket With Flush Type Type 6A Switch Control On A Common Board With Earth Continuity Including Anodised Ms Box And Suitable Both Sides Laminated White Front Plate Including Wire Leads Earth Connections Complete S / F Of Flush Type 6A, 5 Pin Pl S / F Of Flush Type 6A, 5 Pin Plug Socket With Flush Type 6A Switch Control On A Common Board Includin 800 Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Up To 50M Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work As Per Ss - 20 B ( Apss 308 ) - Ordinary Rock ( Not Requiring Blasting ) -Mechanical Means - Up To 3 M Depth Excavation In Ordinary Rock ( Excavation In Ordinary Rock ( Not Requiring Blasting ) Mechanical Means For All Depths 1000 Painting To Iron Work With Two Coats Of Synthetic Enamel Paint Of Grade Ii Of Approved Make And Shade Including A Base Coat Of Red Oxide Primer Paint Of Grade -I Of Approved Make Making 3 Coats - To New Work -All Complete For Finished Item Of Work. Painting With Grade-Ii Enamel Painting With Grade-Ii Enamel Paints 2 Coats To New Iron Work, Including Grade-I Red Oxide Primer Co 750 Varnishing / French Polishing To Wood Work - 2 Coats - Complete For Finished Item Of Work Varnishing / French Polishing To Varnishing / French Polishing To Wood Work - 2Coats 40 Supply And Fixing High Polished Granite 16 To 18 Mm Thick Up To 8 Feet ( 2.43 M ) Black Of Required Size As Directed By The Engineer-In-Charge With Exposed Faces Square Cut And Well Polished, Over 12Mm Thick Cm 1:4 Base Coat On Existing Concrete, With Grey Cement Slurry Of Honey Like Consistency Spread At The Rate Of 3.30Kg. / Sqm. Including Cost And Conveyance All Materials And Water To Work Site And Cost Of Base Coat, All Operational, Incidental, Labour Charges Such As Mixing Mortar, Dressing And Fixing Of Stones In Position Rubbing Curing Etc., Complete For Kitchen Platforms As Directed ( But Excluding Cost Of Cement ) Supply And Fixing High Polishe Supply And Fixing High Polished Granite 16 To 18 Mm Thick Up To 8 Feet ( 2.43 M ) Black Of Required S 160 Providing And Fixing 30Mm Thick Solid Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19Mm X 19Mm For Stiles, And 15Mm X 15Mm For Top And Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Shall Be Covered With 5Mm Thick Heat Moulded Pvc €˜C’ Channel Of Size 30 X 50Mm Forming Stiles, And 5Mm Thick, 75Mm Wide Pvc Sheets For Top Rail, Lock Rail And Bottom Rail On Either Side, And 10Mm ( 5Mm X 2 ) Thick, 20Mm Wide Cross Pvc Sheet As Gap Insert For Top Rail And Bottom Rail. Paneling Of 5Mm Thick Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles And Rails With 30Mm Wide X 5Mm Thick Pvc Sheet Beading On Either Side, And Joined Together With Solvent Cement Adhesive Etc. An Additional 5Mm Thick Pvc Strip Of 20Mm Width Is To Be Stuck On The Interior Side Of The €˜C’ Channel Using Pvc Solvent Adhesive. Complete As Per Direction Of Engineer-In-Charge, Manufacturer’S Specification And Drawing For Finished Item Of Work Including The Following Aluminium Anodised Fittings Complete.: Single Shutter As Per Approved Make A ) 1No.Of 200Mm Long Aldrop With 16Mm Dia Shoot. B ) 2 Nos. 200 To 250Mm Mm Long Tower Bolt With 10Mm Dia Shoot. C ) 2 No. 100 Mm To 150 Mm Long Grip Handle. D ) 3 Nos.150 Mm Long Butt Hinges. S&F 30 Mm Thick Solid Panel Pv S&F 30 Mm Thick Solid Panel Pvc Door Shutter, With Aluminium Fittings. 20 Supplying And Fixing Stainless Steel Sink Size 20 Inches X18 Inches X8 Inches ( 508X457.2X 203.2 Mm ) 1Mm Thick With Accessories Supplying And Fixing Stainless Supplying And Fixing Stainless Steel Sink Size 20 Inches X18 Inches X8 Inches ( 508X457.2X 203.2 Mm ) 20 Supply And Fixing Indian Make White Glazed Vitreous China Porcelain Sink Conforming To Is 2556 -Part-5-1994 On Cantilever Brackets With Waste Fittings Like 32Mm Nominal Size C.P. Fitting With Parallel Pipe Thread Conforming To Is:2963-1979 - 600 X 400 X 250Mm Supply And Fixing Indian Make Supply And Fixing Indian Make White Glazed Vitreous China Porcelain Sink - 600 X 400 X 250Mm 30000 Labour Charges For Fabrication Of Steel Works Like Window Grills, Compound Wall Grills, Iron Doors, Windows, Verandah Grils And Window Guard Bars Including Cost Of Welding Rods, Power Charges Etc., ( Excluding Cost Of Fixing In Position ) L / C For Fabrication Of Steel W L / C For Fabrication Of Steel Works Like Window Grills, Cwall Grills, Iron Doors, Windows Etc 30000 Labour Charges For Fixing Of Window Grills, Compound Wall Grills, Iron Doors, Windows, Verandah Grils, And Window Guard Bars In Position Etc., Complete. L / C For Fixing Of Steel Works L / C For Fixing Of Steel Works Like Window Grills, Cwall Grills, Iron Doors, Windows Etc 465 Construction Of Granular Sub-Base By Providing Hbg Material Confirming To Grading - Vi Of Mortandh Table 400-1 Including Cost And Conveyance Of All Materials To Work Site And Spreading In Uniform Layers With Motor Grader Or By Approved Means, On Prepared Surface Mixing By Mix In Place Method With Rotavator / Approved Means At Omc And Compacting With Vibratory Roller To Achieve The Desired Density Etc., Complete For Finished Item Of Work As Per Technical Specification 401 Of Mort And H And As Directed By The Engineer-In-Charge. ( Material Required Per Cum : 53Mm To 9.5Mm Metal -0.448Cum; 9.5Mm To 2.36Mm Metal - 0.608Cum; 2.36Mm And Below Metal - 0.224Cum ) Construction Of Gsb By Providi Construction Of Gsb By Providing Hbg Material Gr-Vi In Layers With Grader, Mixing In Place Method. 290 Cement Concrete 1:4:8 With 40Mm Down Size ( Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing And Vibrating With Mechanical Vibrator Finishing To The Required Camber For Cc Pavement Sub Grade Including Necessary Side Shuttering Etc., Complete For Finished Item Of Work As Directed ( Excluding Cost Of Cement ) . ( Ca : 0.90 Cum, Fa:0.45Cum ) Cc 1:4:8 For Cc Pavement Sub G Cc 1:4:8 For Cc Pavement Sub Grade. 500 Cement Concrete M-30 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Including Cost And Conveyance Of All Materials To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( Excluding Cost Of Cement ) For Cc Pavements. Cement @ 400Kg / Cum Of Concrete Is To Be Used. ( Ca : 0.90 Cum, Fa:0.45Cum ) Note:- In Case Of Provision Of Steel Reinforcement, Fabrication Charges For The Same Are To Be Paid Separately. M-30 Design Mix Concrete With M-30 Design Mix Concrete With 20Mm Down Size Graded Crushed Granite Metal For Cc Pavements. 600 Providing Contraction Sawn Joints At Every 4.50 M Distance Or As Directed By Engineer In Charge By Grooving With Mechanical Saw, The Width Of 3 To 5Mm And Depths 1 / 3Rd To 1 / 4Th Of Thickness Of Concrete And Operation Should Be Carried Out As Soon As Concrete Is Ready To Accept The Saw Cut Without Trowelling Including Providing Dowel Bars Of Required Dia, Length And Spacing As Per Design And Covered With Thin Plastic Sheathing Of 2 / 3 Length. The Joint Shall Be Filled With Polymer Based Fillers And Sealants As Shown In The Drawing And Including Cost And Conveyance Of All Materials To Work Site, Labour Charges, Etc., Complete For Finished Item Of Work And As Directed By The Engineer-In-Charge ( Excluding The Cost Of Dowel Bars And Their Fabrication Required Which Will Be Paid Separately ) . Note: All Relevant Mort And H / Irc Codes To Be Followed. Providing Contraction Sawn Joi Providing Contraction Sawn Joints At Every 4.50 M Distance With Mechanical Saw. 2500 Supply Of Separation Membrane Of Impermeable Plastic Sheeting 150 Micron Thick Supply Of Separation Membrane Supply Of Separation Membrane Of Impermeable Plastic Sheeting 150 Micron Thick 1080 Plastering To Ceiling With Cement Mortar 1:3, 12Mm Thick ( But Excluding Cost Of Cement ) Plastering To Ceiling With Cm Plastering To Ceiling With Cm 1:3, 12Mm Thick. 1080 Whiting To New Ceiling With Surya Cem / Equivalent Cem, Two Coats Complete For Finished Item Of Work. Whiting To New Ceiling With S Whiting To New Ceiling With Surya Cem / Equivalent Cem, Two Coats 7 Fabrication Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., Including All Leads And Lifts At Site Etc., With Companys Steel Sections But With Contractors Welding Rods, Bolts, Rivets And All Contingencies, Power Charges, Etc., Complete As Per Drawings And Instructions Of The Engineer In Charge. Fabrication Of Structural Stee Fabrication Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., 7 Erecting Companys Steel Purlins, Louvers, Sag Rods, Rafters Etc., With Contractors Tackle, Derric, Crane Etc., Complete Erection Of Structural Steel C Erection Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., 60 Supplying And Fixing Of 15Mm Nominal Size Chromium Plated Finish Brass Over Head Shower Arm Of 450 Mm Long With 90 Degree Bend And Wall Flange Suitable For Rain Shower And With 10 Years Warranty Supplying And Fixing Of 15Mm N Supplying And Fixing Of 15Mm Nominal Size Chromium Plated Finish Brass Over Head Shower Arm Of 450 M 273680 Conveyance Charges Of Sand / Gravel ( Murrum ) For Beyond 30Km ( Rate / Km ) Lead Including Loading Charges. Unloading / Stacking Charges Need Not Be Paid For This Material. Conveyance Charges Of Sand / G Conveyance Charges Of Sand / Gravel ( Murrum ) For Beyond 30Km ( Rate / Km ) Lead Including Loading Charge 60 Supplying And Fixing Of Of 15 Mm Central Hole Chromium Plated Finish Brass Body Single Lever Basin Mixer 450 Mm Long Breaded Pipe For Hot & Cold Water Mixing Conforming To Is 8931 Jaquar Make Queen Series / Jupiter Aqua Lines-Jal Or Equivalent Series With 10 Years Warranty Supplying And Fixing Of Of 15 Supplying And Fixing Of Of 15 Mm Central Hole Chromium Plated Finish Brass Body Single Lever Basin M 40 Supplying And Fixing Of 15 Mm Brass Body Cp Finish Two Way Bib Tap Of Not Less Than 400 Grams Weight With Quarter Turn Spindle Internal / External Threaded Connection Conforming To Is 8931 Supplying And Fixing Of 15 Mm Supplying And Fixing Of 15 Mm Brass Body Cp Finish Two Way Bib Tap Of Not Less Than 400 Grams Weight 80 Supplying And Fixing Np Soap Dish Heavy Type With Np Screws Supplying And Fixing Np Soap D Supplying And Fixing Np Soap Dish Heavy Type With Np Screws 7920 Acrylic Exterior Emulsion Painting To New Walls With Grade-Ii I.E., Ace Or Equivalent Paint Of Approved Make 2 Coats Over A Base Coat Of Grade -Ii Primer ( Making 3 Coats In All ) Complete For Finished Item Of Work -For External Walls Acrylic Exterior Emulsion Pain Acrylic Exterior Emulsion Painting To New Walls With Grade-Ii, 2 Coats Over A Base Coat Of Grade -Ii 232 Cement Concrete 1:5:10 With 40 Mm Size Crushed Granite Metal Of Approved Hard Quality In Foundations Or Plinth Etc., Complete. ( But Excluding Cost Of Cement ) - With Concrete Mixer Cement Concrete 1:5:10 With 40 Cement Concrete 1:5:10 With 40 Mm Size Cg Metal With Concrete Mixer In Foundations Or Plinth Etc., 9100 Add Extra For Shuttering And Centring Charges For Cc - Basement / Sidewalls, Water Tank Walls Add Extra For Shuttering And C Add Extra For Shuttering And Centring Charges For Cc - Basement / Sidewalls, Water Tank Walls 2578 Flyash Brick Masonry With Solid Blocks Of Size 290X225x140mm With 50Kg / Cm2 Compressive Strength In C.M.1:6 For Superstructure Including Scaffolding Etc., ( But Excluding Cost Of Cement ) Complete. Flyash Brick Masonry With Soli Flyash Brick Masonry With Solid Blocks Of Size 290X225x140mm With C.M.1:6 For Superstructure 2900 Reinforced Flyash Brick Masonry With Bricks Of Size 225X100 X60 Mm With 50Kg / Cm2 Compressive Strength In C.M.1:4 And Using Two Mild Steel Bars Of 6Mm Dia In Every Third Layer Of Brick Masonry, With Free Joints In To The Main Block Work For Superstructure Including Scaffolding, And Fabrication Charges Of Steel Etc., ( But Excluding Cost Of Cement And Cost Of Steel ) Complete. For 100Mm Walls Reinforced Flyash Brick Masonr Reinforced Flyash Brick Masonry With Bricks Of Size 225X100 X60 Mm In C.M.1:4 - For 100Mm Walls 20980 Plastering To Brick Masonry With Cement Mortar 1:6, 12Mm Thick Including Raking Out Of Joints ( But Excluding Cost Of Cement ) Plastering To Brick Masonry Wi Plastering To Brick Masonry With Cm 1:6, 12Mm Thick Including Raking Out Of Joints. 1800 Plastering 15 Mm Thick Two Coats With Base Coat Of 11Mm Thick In Cement Mortar 1:6; And Top Coat Of 4Mm Thick In Cm 1:4 With Sponge Finishing Etc., ( But Excluding Cost Of Cement ) Complete For Walls Only Plastering 15Mm Thick In Two C Plastering 15Mm Thick In Two Coats, 11Mm Thick In Cm 1:6 & 4Mm Thick Cm 1:4 With Sponge Finish 10080 Plastering 20Mm Thick Two Coats With Base Coat Of 16Mm Thick In Cement Mortar 1:6; And Top Coat Of 4 Mm Thick In Cm 1:4 With Sponge Finishing Etc., ( But Excluding Cost Of Cement ) Complete For Walls Only Plastering 20Mm Thick In Two C Plastering 20Mm Thick In Two Coats, 16Mm Thick In Cm 1:6 & 4Mm Thick Cm 1:4 With Sponge Finish 2527.5 Supply Of Cement 43 / 53 Grade For The Month Of June - 2022 ( As Per C.Memo.No.146 / Cementand Steel / T2 / 2021-22, Dt:- 10-06-2022 ) Supply Of Cement 43 / 53 Grad Supply Of Cement 43 / 53 Grade For The Month Of June-2022 360 Supply Of Fe-500 / 500D Confirming To Is 1786 - 2008 Reinforcement Steel From Primary Producers Like Tata, Sail, Vsp, Jindal As Approved By Ministry Of Steel Guide Lines For The Month Of June - 2022 Supply Of Fe- 500 / 500D Reinfo Supply Of Fe- 500 / 500D Reinforcement Steel For The Month Of June-2022 47 Supply Of Structural Steel Angles / Channels / Beams / Square Bars For The Month Of June-2022 ( Inclusive Of 13.615% Cp And Oh ) Supply Of Structural Steel Ang Supply Of Structural Steel Angles / Channels / Beams / Square Bars For The Month Of June-2022 1000 Painting To Wood Work / Plastered Surfaces With Two Coats Of Synthetic Enamel Paint Of Grade Ii Of Approved Make And Shade Including A Base Coat Of Wood Primer Of Approved Make Making 3 Coats - To New Work -All Complete For Finished Item Of Work. Painting To New Wood Work / Pl Painting To New Wood Work / Plastered Surfaces, Two Coats, Enamel Paint Grade-Ii Over Primer Make Ma 1920 Plastering To Brick Masonry With Cement Mortar 1:4, 12Mm Thick Including Raking Out Of Joints ( But Excluding Cost Of Cement ) Plastering To Brick Masonry Wi Plastering To Brick Masonry With Cm 1:4, 12Mm Thick Including Raking Out Of Joints. 2800 Supply And Fixing Of Rabbit Wire Mesh For Wall Junctions At Rcc Columns / Beams Or Repair Of Rcc Members With Necessary Nails / Binding Wire Complete, Including Cost And Conveyance Of All Materials, Labour Charges Etc., Complete For Finished Item Of Work As Directed By The Engineer-In-Charge. S / F Rabbit Wire Mesh For Wall S / F Rabbit Wire Mesh For Wall Junctions At Rcc Columns / Beams Or Repair Of Rcc Members. 3000 Earthwork Excavation By Machinery Where Mass Excavation With Large Quantity Is Involved For Buildings, Major Pipe Line Works, Etc., In All Soils Up To Sdr And Stone Matrix Including Cutting And Loading In Tippers With All Lifts Etc., Complete Earthwork Excavation By Machin Earthwork Excavation By Machinery Where Mass Excavation In All Soils Including Cutting And Loading. 20 Supply And Fixing Best Indian Make Plastic Seat And Lid For European Water Closets With Rubber Or Plastic Buffers As Per Is 2548-1996 Supply And Fixing Best Indian Supply And Fixing Best Indian Make Plastic Seat And Lid For European Water Closets With Rubber Or Pl 43 Rounding The Edges Of Cuddaph Slabs And Shahabad Stone Slabs Of Any Thickness Including Polishing The Same Rounding The Edges Of Kadapa S Rounding The Edges Of Kadapa Slabs And Shahabad Stone Slabs Of Any Thickness & Polishing The Same 40 Supply Of Prince / Sudhakar / Kisan / Supreme Or Any Isi Brand Upvc / Swr Pipe ( As Per Isi- Standards ) Fittings Like Bends, Tees, Ys, Etc., For Vent Cowl - 110Mm Dia Supply Of Upvc / Swr Pipe Fitti Supply Of Upvc / Swr Pipe Fittings Like Bends, Tees, Ys, Etc., For Vent Cowl - 110Mm Dia 470 Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Up To 50M Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work As Per Ss - 20 B ( Apss 308 ) - Ordinary Soil-Manual Means -Up To 3 M Depth Earth Work In Ordinary Soil, M Earth Work In Ordinary Soil, Manual Means Upto 3.00M Depth 2075 Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Up To 50M Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work As Per Ss - 20 B ( Apss 308 ) - Ordinary Soils-Mechanical Means -Up To 3 M Depth Earth Work In Ordinary Soil, M Earth Work In Ordinary Soil, Mechanical Means Upto 3.00M Depth 205 Cement Concrete 1:5:10 With 40 Mm Size Crushed Granite Metal Of Approved Hard Quality In Foundations Or Plinth Etc., Complete. ( But Excluding Cost Of Cement ) - With Concrete Mixer Cement Concrete 1:5:10 With 40 Cement Concrete 1:5:10 With 40 Mm Size Cg Metal With Concrete Mixer In Foundations Or Plinth Etc., 985 Cement Concrete 1:3:6 With 40Mm Down Size ( 50% Of 40-20Mm, 30% Of 20-10Mm And 20% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Vibrating, Etc., Complete For Finished Item Of Work As Directed For Side Walls Of Drains Or Basement / Substructure Of The Buildings ( Excluding Cost Of Cement, Centering And Shuttering Charges ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Cement Concrete 1:3:6 With 40M Cement Concrete 1:3:6 With 40Mm Down Size Cg Metal For Side Walls Of Drains Or Basement / Substructur 10 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Roof Slab - Up To 150Mm Thick. Rcc 1:1½:3 For Roof Slabs - Up Rcc 1:1½:3 For Roof Slabs - Up To 150Mm Thick. 1 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Roof Beams. Rcc 1:1½:3 For Roof Beams Rcc 1:1½:3 For Roof Beams 38 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Column Footings / Raft Rcc 1:1½:3 For Column Footings Rcc 1:1½:3 For Column Footings 26 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Columns. Rcc 1:1½:3 For Columns Rcc 1:1½:3 For Columns 30 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Plinth Beams / Brace Beams. Rcc 1:1½:3 For Plinth Beams / Rcc 1:1½:3 For Plinth Beams / Brace Beams 20 Labour Charges For Cutting, Bending And Binding Reinforcement With Contractors Binding Wire, And Placing In Position As Directed By Engineer - In - Charge Including All Leads, Etc., Complete Labour Charges For Cutting, Be Labour Charges For Cutting, Bending And Binding Reinforcement With Contractors Binding Wire 20 Providing Coping With Fly Ash Brick Masonry With Bricks Of 50 Kg / Sq.Cm. Compressive Strength Over 225 Mm Thick Brick Walls With 340X340mm Square Pillars Up To 3M C / C With Brick In Cm1:6 Over The Entire Length Including Pillar Portion And Plastering The Sides And Bottom With Cement Mortar 1:6, 12Mm Thick , And Top With 12Mm Thick At Ends And 20Mm Thick At Center Etc., ( But Excluding Cost Of Cement ) Complete: Coping With Fly Ash Brick Maso Coping With Fly Ash Brick Masonry Over 225Mm Thick Brick Walls Including Plastering. 2420 Plastering To Brick Masonry With Cement Mortar 1:6, 12Mm Thick Including Raking Out Of Joints ( But Excluding Cost Of Cement ) Plastering To Brick Masonry Wi Plastering To Brick Masonry With Cm 1:6, 12Mm Thick Including Raking Out Of Joints. 20 Flooring 30Mm Thick With Cc 1:2:4 Using 10Mm Size Crushed Granite Metal Of Approved Hard Quality On Existing Concrete Base, Rendering Smooth Complete. ( But Excluding Cost Of Cement ) Flooring With Cc 1:2:4, 30Mm T Flooring With Cc 1:2:4, 30Mm Thick, On Existing Concrete Base Rendered Smooth. 715 Flooring 40Mm Thick With Cc1:2:4 Using 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10 - 4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality On Existing Concrete Base, Rendering Smooth Complete. ( But Excluding Cost Of Cement ) Flooring With Cc 1:2:4, 40Mm T Flooring With Cc 1:2:4, 40Mm Thick, On Existing Concrete Base Rendered Smooth. 86.94 Flyash Brick Masonry With Solid Blocks Of Size 290X225x140mm With 50Kg / Cm2 Compressive Strength In C.M.1:6 For Superstructure Including Scaffolding Etc., ( But Excluding Cost Of Cement ) Complete. Flyash Brick Masonry With Soli Flyash Brick Masonry With Solid Blocks Of Size 290X225x140mm With C.M.1:6 For Superstructure 3 Reinforced Cement Concrete 1 : 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Sand, Coarse Aggregate, Water Etc., To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) - For Side Walls Above 200Mm But Upto 300Mm Thick. Rcc 1:1½:3 For Side Walls Abo Rcc 1:1½:3 For Side Walls Above 200Mm But Upto 300Mm Thick. 1460 Excavation For Road Work In Soil With Hydraulic Excavator 0.9Cum Bucket Capacity Including Cutting And Loading In Tippers / Pushing The Earth To Side Of Embankment ( By Trench Cutting ) Including Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines And Grades And Cross Sections As Per Technical Specification 301 Of Mort And H Excavation For Road Work In So Excavation For Road Work In Soil With Hydraulic Excavator Including Cutting And Loading In Tippers. 973 Construction Of Granular Sub-Base By Providing Hbg Material Confirming To Grading - Vi Of Mortandh Table 400-1 Including Cost And Conveyance Of All Materials To Work Site And Spreading In Uniform Layers With Motor Grader Or By Approved Means, On Prepared Surface Mixing By Mix In Place Method With Rotavator / Approved Means At Omc And Compacting With Vibratory Roller To Achieve The Desired Density Etc., Complete For Finished Item Of Work As Per Technical Specification 401 Of Mort And H And As Directed By The Engineer-In-Charge. ( Material Required Per Cum : 53Mm To 9.5Mm Metal -0.448Cum; 9.5Mm To 2.36Mm Metal - 0.608Cum; 2.36Mm And Below Metal - 0.224Cum ) Construction Of Gsb By Providi Construction Of Gsb By Providing Hbg Material Gr-Vi In Layers With Grader, Mixing In Place Method. 990 Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant, Laying In Uniform Layers With Paver In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density. ( Material Required Per Cum : 45 To 22.4 Mm Metal -0.396 Cum; 22.4Mm To 2.36Mm Metal - 0.528Cum; 2.36Mm To 75Microns Metal - 0.396Cum ) By Manual Means Wmm - Providing, Laying, Sprea Wmm - Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wmm Specification. 4500 Laying Of Primer Coat With Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg / Sqm Using Mechanical Means As Per Tech. Specification No 502 Morth. ( But Excluding Cost Of Bitumen Emulsion ) Providing And Applying Primer Providing And Applying Primer Coat With Bitumen Emulsion @ 0.70 Kg / Sqm Mechanical Means. 4500 Laying Of Tack Coat With Vg-10 Bitumen @ 2.50 Kg / 10 Sqm On Granular Surface Including Heating Of Bitumen To The Appropriate Range With Self Heating Arrangements And Spraying Tar With Nozzles And Applied Uniformly With Aid Of Bitumen Pressure Distributor Including Labour Charges, Hire And Operational Charges Of T And P And All Other Operational And Contingent Charges Necessary To Complete The Finished Item Of Work To The Specifications Including Cleaning Of Existing Surface With Mechanical Broom As Per Technical Specification No. 503 Of Morth And As Directed By The Engineer-In-Charge. ( Excluding Cost Of Bitumen ) Laying Of Tack Coat With Vg-10 Laying Of Tack Coat With Vg-10 Bitumen @ 2.5 Kg / 10M2 On Bituminous Surface 225 Providing And Laying Bituminous Macadam 50Mm To 75Mm Thick With Vg-30 Bitumen With Hot Mix Plant ( For Colony Internal And Minor Roads ) Using Grading-Ii Crushed Aggregates Of 19Mm Size As Per Table 500-7 Of Mortandh Premixed With Bituminous Binder@ 3.4%, Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level And Alignment And Rolled To Achieve The Desired Compaction As Per Technical Specification 504 Of Mortandh ( Excluding Cost Of Bitumen ) ( Material Required Per Cum : Bitumen Vg-30 - 74.63 Kg, 25Mm To 27Mm - 0.1414Cum, 19Mm To 22Mm - 0.1414Cum, 12Mm To 14Mm - 0.1414Cum, 9.5Mm To 11.2Mm - 0.4241Cum, 5Mm To 7Mm -0.4241Cum, 2.36Mm And Below - 0.1414Cum ) Bm 50 To 75Mm Thick With Vg-3 Bm 50 To 75Mm Thick With Vg-30 Bitumen With 100-120 Tph Hmp ( For Colony Internal & Minor Roads ) . ( Bi 4500 Laying Of Tack Coat With Vg-10 Bitumen @ 2 Kg / 10 Sqm On Bituminous Surface Including Heating Of Bitumen To The Appropriate Range With Self Heating Arrangements And Spraying Tar With Nozzles And Applying Uniformly With Aid Of Bitumen Pressure Distributor Including Labour Charges, Hire And Operational Charges Of T And P And All Other Operational And Contingent Charges Necessary To Complete The Finished Item Of Work To The Specifications Including Cleaning Of Existing Surface With Mechanical Broom As Per Technical Specification No. 503 Of Morth And As Directed By The Engineer-In-Charge. ( Excluding Cost Of Bitumen ) Laying Of Tack Coat With Vg-1 Laying Of Tack Coat With Vg-10 Bitumen @ 2 Kg / 10 Sqm On Granular Surface Treated With Primer 4500 Providing, Laying And Rolling Of 20Mm Thick Close Graded Premix Surfacing / Mixed Seal Surfacing Using Vg-30 Bitumen By Using Hot Mix Process Composed Of 13.2Mm To 0.09Mm ( Type -B ) Crushed Granite Aggregates As Per Table 500 - 19 Of Mort And H Premixed With Bituminous Binder @ 19 Kg / 10 Sqm Area, To The Required Line, Grade And Level To Serve As Wearing Course Using Hydrostatic Paver Finisher With Sensor Control, Compacting With Three Wheeled Roller 8-10 Tonnes Static Roller Complete As Per Technical Specification 508 Of Morth ( Excluding Cost Of Bitumen ) . 20Mm Thick Close Graded Premix 20Mm Thick Close Graded Premix / Mixed Seal Surfacing Using Vg-30 Bitumen Binder @ 19 Kg / 10 Sqm. 2.025 Supply Of Bitumen 80 / 100 ( Vg-10 ) ( Bulk ) As On 01.07.2022 ( Inclusive Of 13.615% Cp And Oh ) Supply Of Bitumen 80 / 100 ( Vg- Supply Of Bitumen 80 / 100 ( Vg-10 ) ( Bulk ) As On 01.07.2022 26 Supply Of Bitumen 60 / 70 ( Vg-30 ) ( Bulk ) As On 01.07.2022 ( Inclusive Of 13.615% Cp And Oh ) Supply Of Bitumen 60 / 70 ( Vg-3 Supply Of Bitumen 60 / 70 ( Vg-30 ) ( Bulk ) As On 01.07.2022 3.15 Supply Of Bitumen Emulsion Ss1 ( Bulk ) As On 01.07.2022 ( Inclusive Of 13.615% Cp And Oh ) Supply Of Bitumen Emulsion Ss Supply Of Bitumen Emulsion Ss1 ( Bulk ) As On 01.07.2022 32550 Conveyance Charges Of Bitumen - Bulk Note:- For Calculating Kilometres, Round The Trip I.E., To And Fro Distance Is To Be Considered. Conveyance Charges Of Bitumen Conveyance Charges Of Bitumen - Bulk Note:- For Calculating Kilometres, Round The Trip I.E., To A 135 Construction Of Embankment / Shoulders With Approved Materials Deposited At Site From Roadway Cutting And Excavation From Drain And Foundation Of Other Structures Graded And Compacted As Per Technical Specification 305 Of Mort And H Construction Of Embankment / S Construction Of Embankment / Shoulders, Graded And Compacted As Per Tech Specification 305 Of Mort&H 5 Cement Concrete 1:4:8 With 40 Mm Crushed Granite Metal Of Approved Hard Quality In Foundations Of Cd Works Including Machine Mixing, Vibrating With Necessary Shuttering Etc., Complete As Per Drawings And Technical Specification Clauses 802, 803, 1202 And 1203 Mord And 1500, 1700 And 2100 Morth ( But Excluding Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Cc1:4:8 In Foundations Of Cd W Cc1:4:8 In Foundations Of Cd Works Including Machine Mixing, Vibrating With Necessary Shuttering Etc 34 Cement Concrete 1:3:6 With 40Mm Down Size ( 50% Of 40-20Mm, 30% Of 20-10Mm And 20% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Vibrating With Necessary Shuttering And Centering Charges, Etc., Complete For Finished Item Of Work As Directed For Substructure Of Cd Works I.E, Abutments / Peirs / Wing Walls / Returns Etc., Up To A Height Of 5M As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 And 1204 Mord And 1500, 1700 And 2200 Morth ( Excluding Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Cc1:3:6 For Substructure Of Cd Cc1:3:6 For Substructure Of Cd Works I.E. Abutments / Piers / Wing Walls / Returns Etc Up To A Ht Of 5M. 10 Reinforced Cement Concrete 1: 1.5 : 3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Vibrating With Necessary Shuttering And Centering Charges, Etc., Complete For Finished Item Of Work As Directed For Super Structure Of Cd Works I.E ., Deck Slab Complete As Per Drawings And Technical Specification Clauses 800, 1205.5 Mord / Sections 1500, 1600 And 1700 Morth ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Rcc 1: 1.5 :3 For Superstructu Rcc 1: 1.5 :3 For Superstructure Of Cd Works I.E. Deck Slab. 1 Reinforced Cement Concrete Grade M 25 Design Mix With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Necessary Shuttering And Centering Charges, Etc., Complete For Finished Item Of Work As Directed For Railing Of Cd Works Complete As Per Drawings And Technical Specification Clauses 800, 900, 1208.3 Mord ( But Excluding Cost Of Steel Reinforcement And Its Fabrication Charges And Cost Of Cement ) Cement @ 380Kg / Cum Is To Be Used. ( Ca : 0.90 Cum, Fa:0.45Cum ) M-25 Design Mix For Railing Of M-25 Design Mix For Railing Of Cd Works Cement @ 380Kg / Cum Is To Be Used. 380 Cement Concrete 1:4:8 With 40Mm Down Size ( Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing And Vibrating With Mechanical Vibrator Finishing To The Required Camber For Cc Pavement Sub Grade Including Necessary Side Shuttering Etc., Complete For Finished Item Of Work As Directed ( Excluding Cost Of Cement ) . ( Ca : 0.90 Cum, Fa:0.45Cum ) Cc 1:4:8 For Cc Pavement Sub G Cc 1:4:8 For Cc Pavement Sub Grade. 760 Cement Concrete M-30 Design Mix Concrete Corresponding To Is 456 Using Concrete Mixer With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Including Cost And Conveyance Of All Materials To Site And Including Machine Mixing And Vibrating With Mechanical Vibrators, Finishing, And Centering / Shuttering Charges, Etc, ( Excluding Cost Of Cement ) For Cc Pavements. Cement @ 400Kg / Cum Of Concrete Is To Be Used. ( Ca : 0.90 Cum, Fa:0.45Cum ) Note:- In Case Of Provision Of Steel Reinforcement, Fabrication Charges For The Same Are To Be Paid Separately. M-30 Design Mix Concrete With M-30 Design Mix Concrete With 20Mm Down Size Graded Crushed Granite Metal For Cc Pavements. 1050 Providing Contraction Sawn Joints At Every 4.50 M Distance Or As Directed By Engineer In Charge By Grooving With Mechanical Saw, The Width Of 3 To 5Mm And Depths 1 / 3Rd To 1 / 4Th Of Thickness Of Concrete And Operation Should Be Carried Out As Soon As Concrete Is Ready To Accept The Saw Cut Without Trowelling Including Providing Dowel Bars Of Required Dia, Length And Spacing As Per Design And Covered With Thin Plastic Sheathing Of 2 / 3 Length. The Joint Shall Be Filled With Polymer Based Fillers And Sealants As Shown In The Drawing And Including Cost And Conveyance Of All Materials To Work Site, Labour Charges, Etc., Complete For Finished Item Of Work And As Directed By The Engineer-In-Charge ( Excluding The Cost Of Dowel Bars And Their Fabrication Required Which Will Be Paid Separately ) . Note: All Relevant Mort And H / Irc Codes To Be Followed. Providing Contraction Sawn Joi Providing Contraction Sawn Joints At Every 4.50 M Distance With Mechanical Saw. 3800 Supply Of Separation Membrane Of Impermeable Plastic Sheeting 150 Micron Thick Supply Of Separation Membrane Supply Of Separation Membrane Of Impermeable Plastic Sheeting 150 Micron Thick 60750 Conveyance Charges Of Sand / Gravel ( Murrum ) For Beyond 30Km ( Rate / Km ) Lead Including Loading Charges. Unloading / Stacking Charges Need Not Be Paid For This Material. Conveyance Charges Of Sand / G Conveyance Charges Of Sand / Gravel ( Murrum ) For Beyond 30Km ( Rate / Km ) Lead Including Loading Charge 1 Cement Concrete 1: 1.5 :3 With 20Mm Down Size ( 65% Of 20-10Mm And 35% Of 10-4.75Mm ) Graded Crushed Granite Metal Of Approved Hard Quality Including Machine Mixing, Vibrating Etc., Complete For Finished Item Of Work As Directed For Wearing Course Of Cd Works Complete As Per Drawings And Technical Specification Clauses 800, 1206.3 Mord And 2702 Morth ( But Excluding Cost Of Cement ) ( Ca : 0.90 Cum, Fa:0.45Cum ) Rcc 1: 1.5 :3 With 20Mm Downsi Rcc 1: 1.5 :3 With 20Mm Downsize Cg Metal, For Wearing Course Of Cd Works. 520 Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600Mm Dia 6 Metre Openable Length, Having 50 Nos Rounds Per 6Metre Length, Upto 3 M Height Of Wall With Existing Angle Iron Y Shaped Placed 2.4M Or 3.00M Apart And With 9 Horizontal Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-Incharge, With Spring Core ( 2.5 Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sq Mm ( Cost Of M.S. Angle, C.C. Blocks And Barbed Wire Shall Be Paid Separately ) . Providing And Fixing Concertin Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600Mm Dia 6 Metre Ope 438.984 Supply Of Galvanized Steel Barbed Wire Conforming To Is 278 -1978 Type A -4 Point Barbs Round Both Line Wires 75Mm Apart With 12 Swg Line Wire With A Minimum Mass Of 9.38 Kg Per 100M. Supply Of Galvanized Steel Ba Supply Of Galvanized Steel Barbed Wire 2 Fabrication Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., Including All Leads And Lifts At Site Etc., With Companys Steel Sections But With Contractors Welding Rods, Bolts, Rivets And All Contingencies, Power Charges, Etc., Complete As Per Drawings And Instructions Of The Engineer In Charge. Fabrication Of Structural Stee Fabrication Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., 72 Painting To Iron Work With Two Coats Of Synthetic Enamel Paint Of Grade Ii Of Approved Make And Shade Including A Base Coat Of Red Oxide Primer Paint Of Grade -I Of Approved Make Making 3 Coats - To New Work -All Complete For Finished Item Of Work. Painting With Grade-Ii Enamel Painting With Grade-Ii Enamel Paints 2 Coats To New Iron Work, Including Grade-I Red Oxide Primer Co 694 Supply Of Cement 43 / 53 Grade For The Month Of June - 2022 ( As Per C.Memo.No.146 / Cementand Steel / T2 / 2021-22, Dt:- 10-06-2022 ) Supply Of Cement 43 / 53 Grad Supply Of Cement 43 / 53 Grade For The Month Of June-2022 20 Supply Of Fe-500 / 500D Confirming To Is 1786 - 2008 Reinforcement Steel From Primary Producers Like Tata, Sail, Vsp, Jindal As Approved By Ministry Of Steel Guide Lines For The Month Of June - 2022 Supply Of Fe- 500 / 500D Reinfo Supply Of Fe- 500 / 500D Reinforcement Steel For The Month Of June-2022 10 Supply Of Structural Steel Angles / Channels / Beams / Square Bars For The Month Of June-2022 ( Inclusive Of 13.615% Cp And Oh ) Supply Of Structural Steel Ang Supply Of Structural Steel Angles / Channels / Beams / Square Bars For The Month Of June-2022 3687 Add Extra For Shuttering And Centring Charges For Cc - Basement / Sidewalls, Water Tank Walls Add Extra For Shuttering And C Add Extra For Shuttering And Centring Charges For Cc - Basement / Sidewalls, Water Tank Walls 2 Erecting Companys Steel Purlins, Louvers, Sag Rods, Rafters Etc., With Contractors Tackle, Derric, Crane Etc., Complete Erection Of Structural Steel C Erection Of Structural Steel Components Like Purlins, Louvers, Sag Rods, Rafters Etc., 1500 Plastering To Brick Masonry With Cement Mortar 1:4, 12Mm Thick Including Raking Out Of Joints ( But Excluding Cost Of Cement ) Plastering To Brick Masonry Wi Plastering To Brick Masonry With Cm 1:4, 12Mm Thick Including Raking Out Of Joints.
