Normalt Refit Of In-Asset - 1.0001 Normal Refit Of In Asset Equipment Description Hull Work Package 001 , visakhapatnam-Andhra Pradesh

Normalt Refit Of In-Asset - 1.0001 Normal Refit Of In Asset Equipment Description Hull Work Package 001 Docking- Vessel To Be Docked In Both Versions. Note 1:- Firms Not To Quote View Docking, Undocking And Dock Blocks Preparation Will Be Done By Navy And The Job Is Required To Be Carried Out In Navy Premises ( I.E Nd ( V ) Slipway ) . Note 2:- Last Date Of Undocking -06 Mar 17 1.0002 002 Hull Cleaning ( A ) Under Water And Boot Top Area Hp Jet Clean Entire Under Water Area Inlcuding Boot Top Area ( With A Pressure Not Exceeding 3000 Psi ) Including Ship Side And Remove The Marine Growth / Barnacles And Prepare For Survey. 1.0003 002 Hull Cleaning ( B ) Internal Compartments - Engine Room And Srp Compartment Manually Clean Following Internal Compartments And Present For Survey. Engine Room. 1.0004 003 Hull Survey ( A ) Carry Out Visual / Hammer Survey In Accordance With No 01 / 15 Of U / W Hull Including Boot Top Area, Above Water Hull, Super Structure, Weather Decks, All Internal Compartments Including Living Spaces Tanks I.E. Fw Tanks, Ballast Tanks, Fore Peak Tank, Engine Room, Steering Compartment, Fo Tanks, Cofferdams, All Stiffeners And Deck Fittings Etc. All Manholes To Be Inspected To Ensure Water Tightness. Note: Firm To Submit 07 Copies Of Hull Survey Report . Firm To Prove The Welds By Non-Destructive Tests And By Hose Test On Completion Of Welding.Cost Of Visual / Utg Survey And Necessary Repairs Undertaken To Be Quoted Under Dl 1.0005 003 Hull Survey ( B ) Carry Out Utg Survey Of Entire U / W Hull Including Boot Top Area And Sea Tubes. Note: Cost Of Visual / Utg Survey And Necessary Repairs Undertaken To Be Quoted Under Dl 1.0006 003 Hull Survey ( C ) Carry Out Utg Survey Fw Tanks And Ballast Tanks. 1.0007 003 Hull Survey ( D ) Carry Out Utg Survey Fuel Oil Tanks 1.0008 003 Hull Survey ( E ) Carry Out Utg Survey Of External Above Water Area ( Shipside ) Including Bulwark, Weather Deck, Main Wt Bulkheads, Super Structure, Deck Fittings, Foundations And Main Mast As Indicated By Survey Team. 1.0009 003 Hull Survey ( F ) Carry Out Utg Survey Of Machinery Bilges, Void Spaces, Cofferdam And Cable Locker 1.001 004 Steel Renewals Quote For Steel Renewal At Various Locations As Per Survey Report. Note 1:- Quoted Repair Cost Shall Include Cost Of Both Sides Blasted And Primed Grade `A’ Quality Ship Building Steel For Shell And Is 2062 Grade `B’ Quality Steel For Non Structural Works, Degutting / Regutting / Renewal Of All Obstructions In Way Of Steel Renewals Including Lagging / Panelling, Minor Fittings / Equipments With Their Foundations, Ventilation Systems, Staging Etc., As Indicated By Survey Team / Rmt, Proving Of The Weld Runs By Non-Destructive Tests And By Hose Test On Completion Of Welding, Pressure Testing And Proving Of Tanks Where Steel Renewal Undertaken Etc. Note 2:- Firms To Indicate Cost Of New Panelling ( 2Mm Thick ) And Lagging ( 2 Mfmb ) Material In The Budgetary Cost For 50 Sqm Each.Note: Cost Of Visual / Utg Survey And Necessary Repairs Undertaken To Be Quoted Under Dl 1.0011 005 Build Ups Carry Out Build Ups As Indicated By The Hull Survey Team / Surveyor ( A ) 25 X 25 Mm - 300 Nos 1.0012 005 Build Ups Carry Out Build Ups As Indicated By The Hull Survey Team / Surveyor ( B ) 50 X50 Mm - 150 Nos 1.0013 006 Fairing Carryout Fairing Of Deformed Structures As Indicated By Hull Survey Team / Surveyor 1.0014 007 Re-Welding Run Carry Out Re-Welding Runs On Weld Seams As Indicated By Hull Survey Team / Qc / Rmt. 1.0015 008 Sea Tube ( A ) Hydro Jet Blasting, And Pressure Testing Of Sea Tube Including Sea Chest To Be Carried Out. Dia - 300Mm 1.0016 008 Sea Tube ( B ) Carryout Renewal Of Defective Seatubes, Od-300Mm. 1.0017 009 Draught Marks Draught Marks Corroded / Eaten Away, To Be Renewed And Painted. Both Roman And Numeric. 1.0018 010 Sacrificial Anodes ( A ) Renew Sacrificial Anodes ( Mk-Ii ) Those Consumed More Than 50% Note:- Anodes Will Be Supply By Firm. 1.0019 010 Sacrificial Anodes ( B ) Renew Sacrificial Anodes ( Mk- Iii ) Those Consumed More Than 50% Note:- Anodes Will Be Supply By Firm. 1.002 011 Surface Preparation. Under Water Area Including Boot Top Area Carry Out Grit Blasting To Sa 2.5 Standard On The Underwater Areas For Removal Of U / W Paint And Application Of Under Water Paint Scheme As Per No 01 / 15 . 1.0021 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area Including Boot Top Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer - Penguard Primer , Dft-50 Microns 1.0022 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Anti Corrosive - Jotacote Universal N10 ( Aluminium ) - 150 Microns 1.0023 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( C ) 3Rd Coat: Anti Corrosive - Jotacote Universal N10 ( Grey ) - 150 Microns 1.0024 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( D ) 4Th Coat: Tie Coat: Safeguard Universal Es - 125 Microns 1.0025 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Under Water Area - Painting - Akzo Nobel Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( E ) 5Th Coat: A / F: Seaquantum Pro U ( Light Red ) - 150 Microns 1.0026 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( F ) 6Th Coat: A / F:Seaquantum Pro U ( Dark Red ) - 150 Microns 1.0027 012 Painting Under Water Area Including Boot Top Area - Jotun Scheme. Paint Under Water Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( G ) 7Th Top Coat: A / F Seaquantum Spectrum ( Black ) - 150 Microns Dft 1.0028 013 Surface Prepartion Above Water Area And Bulwark ( A ) Carry Out Grit Blasting To Sa 2.5 Standard On The Above Water Area And Bulwark For Removal Of Paint And Application Of New Paint Scheme As Per No 01 / 15. 1.0029 013 Surface Prepartion Super Structure, Deck Fittings Including Guardrails ( B ) Carry Out Hydrojet Blasting To Wj 2 Standard For Removal Of Paint. 1.003 014 Painting Above Water Area, Bulwark, Super Structure And Deck Fittings Including Guardrails - Jotun Scheme ( A ) Paint Above Mentioned Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. 1St Coat: Penguard Primer ( Red ) , 50 Microns Dft 1.0031 014 Painting Above Water Area, Bulwark, Super Structure And Deck Fittings Including Guardrails - Jotun Scheme ( B ) Paint Above Mentioned Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. 2Nd Coat:Jotamastic 80 ( Red Brown ) - 125 Microns Dft 1.0032 014 Painting Above Water Area, Bulwark, Super Structure And Deck Fittings Including Guardrails - Jotun Scheme ( C ) Paint Above Mentioned Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. 3Rd Coat:Jotamastic 80 ( Grey ) - 125 Microns Dft 1.0033 014 Painting Above Water Area, Bulwark, Super Structure And Deck Fittings Including Guardrails - Jotun Scheme ( D ) Paint Above Mentioned Area With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. 4Th Coat:Hardtop Xp ( Ral7040 ) - 60 Microns Dft 1.0034 015 Surface Prepartion Weather Deck Carry Out Hydrojet Blasting To Wj 2 On Weather Deck. 1.0035 016 Painting Weather Deck - Jotun Scheme Paint Weather Deck With Following Paint Scheme. Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer - Penguard Primer ( Red ) , 50 Microns Dft 1.0036 016 Painting Weather Deck - Jotun Scheme Paint Weather Deck With Following Paint Scheme. Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Jotacote Universal N10 ( Aluminium ) - 2X150 Microns Dft 1.0037 016 Painting Weather Deck - Jotun Scheme Paint Weather Deck With Following Paint Scheme. Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( C ) 3Rd Coat: Non Slip Epoxy D.A. Grey ( Hdns ) - 2X250 Microns Dft 1.0038 017 Cleaning And Application Of Om 750 Oil Lube Oil Tank, Waste Oil Tank, Bilge Holding Tank, Fuel Oil Service Tank, Fuel Oil Db Tank Manually Scrap And Clean Fuel Tank And Apply Two Coats Of Om 750 Oil. Note:- Firm To Quote For Service & Material Required For Undertaking Job. Oil To Be Provisioned By Firm. 1.0039 018 Surface Preparation Internal Compartments -Tanks Carry Out Mechanical Surface Preparation To St 3 ( Bare Metal ) Standards For Paint Application In Fore Peak Tanks, Aft Peak Tank, Ballast Tank, Sw Oh Tank. 1.004 019 Painting Fore Peak Tanks, Aft Peak Tank, Ballast Tank, Sw Oh Tank - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( A ) 1St Coat: Primer -Penguar Primer -50 Microns Dft 1.0041 019 Painting Fore Peak Tanks, Aft Peak Tank, Ballast Tank, Sw Oh Tank - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( B ) 2Nd Coat: Bolloxy Hb Light Light Biege- Dft -150 Micron 1.0042 019 Painting Fore Peak Tanks, Aft Peak Tank, Ballast Tank, Sw Oh Tank - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( C ) 3Rd Coat: Bolloxy Hb Light Light Green - 150 Microns 1.0043 020 Surface Preparation Internal Compartments -Cable Locker Carry Out Mechanical Surface Preparation To St 3 ( Bare Metal ) Standards For Paint Application In 1.0044 021 Painting Internal Compartments -Cable Locker - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( A ) 1St Coat: Primer -Penguar Primer -50 Microns Dft 1.0045 021 Painting Internal Compartments -Cable Locker - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( B ) 2Nd Coat: Jotacoat Universal N10 Dft -2X150 Micron 1.0046 021 Painting Internal Compartments -Cable Locker - Jotun Scheme. Paint Fore Peak Tanks, Cofferdams And Cable Locker With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( C ) 3Rd Coat: Penguard Top Coat - 50 Microns 1.0047 022 Surface Preparation Fresh Water Tanks, Foam Tank And Fresh Water Gravity Tanks Carry Out Mechanical Cleaning To St 3 ( Bare Metal ) Standard For Paint Application. 1.0048 023 Painting Fresh Water Tanks, Foam Tank And Fresh Water Gravity Tanks - Jotun Scheme. Paint Fresh Water Tanks / Foam Tanks With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints . ( A ) 1St Coat: Penguard Hb White -100 Microns Dft 1.0049 023 Painting Fresh Water Tanks, Foam Tank And Fresh Water Gravity Tanks - Jotun Scheme. Paint Fresh Water Tanks / Foam Tanks With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: Penguard Hb Grey -100 Microns Dft 1.005 023 Painting Fresh Water Tanks, Foam Tank And Fresh Water Gravity Tanks - Jotun Scheme. Paint Fresh Water Tanks / Foam Tanks With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( C ) 3Rd Coat: Penguard Hb White -100 Microns Dft 1.0051 024 Surface Preparation Internal Compartments - Bilges Of Engine Room And Srp Compartment Carry Out Mechanical Cleaning To St 3 Standard For Paint Application. 1.0052 025 Painting Bilges Of Engine Room And Srp Compartment - Jotun Scheme. Paint Bilges Of Engine Room And Asp Compartment With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( A ) 1St Coat: Primer - Penguard Primer ( Red ) - 50 Microns Dft 1.0053 025 Painting Bilges Of Engine Room And Srp Compartment - Jotun Scheme. Paint Bilges Of Engine Room And Asp Compartment With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints ( B ) 2Nd Coat: Anticorrosive - Jotacote Universal N10 ( Aluminium ) - 150 Microns 1.0054 025 Painting Bilges Of Engine Room And Srp Compartment - Jotun Scheme. Paint Bilges Of Engine Room And Asp Compartment With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also ( C ) 3Rd Coat: Anticorrosive - Jotacote Universal N10 ( Grey ) - 150 Microns 1.0055 025 Painting Bilges Of Engine Room And Srp Compartment - Jotun Scheme. Paint Bilges Of Engine Room And Asp Compartment With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints ( D ) 4Th Coat: Top Coat -Penguard Top Coat ( Grey 38 ) - 50 Microns 1.0056 026 Surface Preparation Bulkheads Of Engine Room And Srp Compartments And Living Spaces. Carry Out Mechanical Cleaning To St 1 Standard For Paint Application. 1.0057 027 Painting Bulkheads Of Engine Room And Srp Compartments And Living Spaces - Paint Bulkheads Of Engine Room And Srp Compartments And Living Spaces , With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints. ( A ) 1St Coat: Primer -Epoxy Red Oxide Primer - 2X40 Microns Dft 1.0058 027 Painting Bulkheads Of Engine Room And Srp Compartments And Living Spaces - Jotun Scheme Paint Bulkheads Of Engine Room And Srp Compartments And Living Spaces , With Following Paint Scheme:- Note:- Quoted Repair Cost Shall Be Inclusive Of Cost Of Paints Also. ( B ) 2Nd Coat: White Interior Fire Retradant Paint ( Jss 8010-72:2001 ) Dft-2X100 Microns 1.0059 028 Air Pressure Testing ( A ) Air Pressure Test The Following Tanks To 0.14 Kg Per Sq. Cms And Rectify The Defects Any Observed During Pressure Testing And Prove. Note:- Apt And Proving Of Those Tanks Wherein Steel Renewal Undertaken As Part Of Steel Renewal Dl. 0004 Above Is That Of Firms Liability With No Additional Cost And Those Tanks Where No Steel Renewals Undertaken Only Would Be Considered For Payment As Per The Indicated Rates Under This Dl. Serial. ( I ) Fresh Water Tank ( Ii ) Fwd Ballast Tank ( Iii ) Forepeak Tank ( Iv ) Fuel Tank ( V ) Aft Peak Tank ( Vi ) Lube Oil Tank ( Vii ) Waste Oil Tank ( Viii ) Bilge Holding Tank 1.006 028 Bilge Platform Plate ( B ) Renew Bilge Platform Plate. Material- Aluminium Chequered Plate, Thickness- 05 Mm 1.0061 029 Bilge Platform Supporting Brackets Bilge Platform Supporting Brackets At Indicated Locations To Be Renewed. Mat - Ms 1.0062 030 Key Fender Head & Stern Fenders Key Fender Securing Arrangement Coaming Plate And Partition Plates Between Fenders Corroded, Thinned And Holed. All Fittings To Be Renewed As Per Survey Reports . Note: - Work Involves Removal Of Head And Stern Key Fenders For Hull Survey And Repair / Renewal Of Top And Bottom Securing Brackets / Plates And Partition Plates. ( A ) Top And Bottom Securing Brackets / Plates And Partition Plates Length Varies From 430 Mm To 905 Mm X 8Mm Thick 1.0063 030 Key Fender Head & Stern Fenders ( B ) All Head And Stern Key Fenders To Be Renewed With White Colour Fenders As Per Sizes. Specification - Epdm Rubber As Per Nes 170.Crossection Size 300Mmx300mm. Length Of Fenders Varies Between 430Mm To 850 Mm. 1.0064 030 Key Fender Head & Stern Fenders Key Fender Securing Arrangement ( C ) Renewal Of Nuts And Bolts Including Washers - M24 Dia , Length Of Fenders Varies Between 430 Mm To 905 Mm. Length Of Ms Rod As Per Size Of Each Fenders. 1.0065 031 Tyre Fenders Tyre Fender Damaged On P&S Side , To Be Renwed With Used Aircraft Tyre Fenders Moulded With 8 Mm White Natural Rubber. Mat- Rubber, Colour-White . No Painting Or Coating Of Any Other Form Will Be Permitted. Vendors To Adhere Sow ( A ) Od 750Mm; Id 400Mm Width Of Tyre- 360 Mm 1.0066 031 Tyre Fenders Tyre Fender Damaged At Fwd And Aft To Be Renwed With Used Aircraft Tyre Fenders Moulded With 8 Mm White Natural Rubber. Mat- Rubber, Colour-White . No Painting Or Coating Of Any Other Form Will Be Permitted. Vendors To Adhere Sow ( B ) Tyre Fenders , Od- 1000 Mm, Id 800 Mm For Fwd And Aft . Width-350 Mm 1.0067 031 Tyre Fenders ( C ) Tyre Fenders Are To Be Secured With Securing Chains. Dia- 16 Mm 1.0068 031 Tyre Fenders ( D ) Tyre Fenders Securing Chain Is To Be Secured With D-Shackles. 14 Mm Dia 1.0069 031 Tyre Fenders ( E ) Securing Brackets Of Tyre Fenders Damaged / Detoriartyed To Be Renewed 1.007 032 Under Water Fenders ( A ) Underwater Fenders To Be Removed For Inspection Of Fenders And C Channel And For Visual / Utg Survey And Necessary Repairs To Be Attended On Fender Securing Brackets ( C Channel ) And Associted Hull. Note: Cost Of Visual / Utg Survey And Necessary Repairs Undertaken To Be Quoted Under Dl 1.0071 032 Under Water Fenders ( B ) Fenders To Be Fitted In Black Colour Below Water Line And Above Water Line With-White Colour. Specification - Epdm Rubber As Per Nes 170, Qty. - 50 Nos Black, 100 Nos White 1.0072 032 Underwater Fenders Securing Arrangment ( C ) Fenders Is To Be Secured With Proper Nut, Bolt And Washers As Per Sample. ( Mat - Ms With Nickel Coating ) , Nut & Bolt Dia -20 Mm, Bolt Length-370 Mm, Washer Dia-22Mm ) ( Note : Firm To Quote For Nuts Bolts And Associated Accessories Also ) 1.0073 032 Under Water Fenders ( D ) Damaged C Channel Of Underwater Fender Scuring Channel To Be Renewed 1.0074 033 Bulwark Coaming Bulwark Coaming Pipes Corroded And Thinned. To Be Included In Hull In Survey And Renew As Per Survey Report. To Be Quoted Under Steel Renewal. ( A ) Pipe On Bulwark 1.0075 033 Bulwark Coaming ( B ) Frames Deformed At Various Locations On Weather Deck Including Bulwark Frames To Be Renew As Per Survey Report. 1.0076 034 Anchor And Chain Cable ( A )  Chain Cable And Associated Fittings Are To Be Hydrojet Blasted To Bare Metal And Survey To Be Carried Out. Paint With 02 Coat Of Black Bituminous Post Survey Iaw No 02 / 2021 And Refit Back. Renew Off All Such Parts Which Declared Unservicebile. Note : -The Job Involves Removal Of All Anchor Accessories, Laying Out And Hydro Jet Blasting For Survey And Painting And Final Refitment Post Survey By Nd ( V ) 1.0077 034 Anchor And Chain Cable ( B )  Removal Of Swivel Piece For Hydrojet Blasting And Survey.Paint With 02 Coat Of Black Bituminous Paint Post Survey Iaw No 02 / 2021 And Refit Back 1.0078 034 Anchor And Chain Cable ( C )  Removal Of Lug Less Joining Shackles For Hydrojet Blasting And Survey.Paint With 02 Coat Of Black Bituminous Paint Post Survey Iaw No 02 / 2021 And Refit Back 1.0079 034 Anchor And Chain Cable ( D )  Serviceabilty Checks Of Anchor Strope To Be Carried Out. Note : Report To Be Submitted. 1.008 034 Anchor And Chain Cable ( D )  Anchor Strope To Be Renew If Found Unserviceable. 1.0081 034 Anchor And Chain Cable ( E ) Anchors ( Including Anchor Shackle, Trasition Shackle And Crown Shackle ) To Be Hydrojet Blasted To Bare Metal And Survey To Be Carried Out. Paint With 02 Coat Of Jotamastic 80 Black ( As Per Ps 60 Of No 53 / 16 ) Post Survey Iaw No 02 / 2021 And Refit Back. 1.0082 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. Type: Anchor Windlass ( Chain Size 20.5Mm ) ( A ) Overhaul Anchor Windlass. Arrest Leackages In Piping And Fittings. Oil Level Sight Glass To Be Replaced.The Complete Grease To Be Removed, The Bearing Housing To Be Washed With Cleaner / Petrol And Throughly Dried. Overhauling Of Anchor Windlass Includes Removal Of Drum, Gearbox, . Renewal Of Bearings, Machining Of Sleeves / Bushes, Brake Drum Surfaces To Be Cleaned And Deposited Rust, Oil Grease To Be Removed. Renewal Of Brake Lining, Renewal Of Gear Box Oil, And Overhauling And Refitment. Grease Nipples To Be Renewed. Fresh Grease To Be Charged Into Sytem. Anchor Windlass To Be Proved For Satisfactory Operation Post Overhaulling. Note: Oil And Grease To Be Supplied By Firm. ( Oil Qty- 100 Ltrs, Oil Grade- Sae 140 ) , Grease :- Servogem ( M / S Ioc Or Equivalent, 10 Kgs ) 1.0083 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. ( B ) Renewal Of Bearings To Be Carried Out. 1.0084 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. ( C ) Blow Out Motor Windings Throughly With Clean Dry Air.Clean And Varnish Dirty And Oily Windlings. Check Insulation Resistamce To Earth And Between Phases. Air Gap To Be Checked And Adjusted Terminals And Scres To Be Cleaned And Tightned. Corroded Surfaces To Be Made Clean And Smooth. Bad Contacts To Be Replaced With New. Replacement Of Switch And Fuse Contacts To Be Carried Out Report To Be Rendered. 1.0085 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. ( D ) Gypsy, Pedestal, Linkages, Brake & Clutch To Be Cleaned And Check For Proper Operation. Greasing To Be Done. Adjust Clearances For Optimum Performance. Clearances To Be Checked And Recorded 1.0086 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. ( E ) Bushes And Bearings For Gypsy And Pedestal Arrangement To Be Replaced 1.0087 035 Anchor Windlass Make: Geeta Engineering Works Pvt. Ltd. ( F ) Clutching And Declucting Arrangement To Be Overhauled.Rust And Old Grease To Be Removed. Parts To Be Cleaned Properly. Oil Seal And Bushes To Be Replaced. Defective Parts To Be Repaired / Fabricated.Lubrication Of Clutch Arrangements Be Done. Clutch Arrangement System To Be Proved For Satisfactory Performance. 1.0088 036 Capstan ( A ) Overhauling Of Capstan To Be Carried Out. Renew Brake Linings, Refit And Prove For Satisfactory Operation. Dia 400 Mm Note :- Overhauling Involves Removal Of Drum, Gearbox, And Overhaul Of All These Items And Refitment. 1.0089 036 Capstan ( B ) Drain Gear Unit Oil & Flush Throughly And Refill With Fresh Oil. Note: Oil To Be Supplied By Firm. ( Qty-20 Ltrs ) Oil Grade- Sae 140 ) 1.009 036 Capstan ( C ) Clean All Surfaces And Adjacent To End Covers. Remove Old Grease And Lubricate All Greasing Points. 1.0091 037 Single Bollards Single Bollards Corroded, Thinned And Holed. To Be Repaired As Per Survey Report.Details :- Size Of Pipe: 280Mm Diax1200 Mm Height. Doubler Plate Of Dia 300Mm And 10Mm Thick, Dummy Plate Of 300Mm Dia And 12Mm Thick, Supporting Bracket Of Bollard Pipe Of 380Mmx360mmx10mm. Tripping Bracket Of Size 250Mmx150mm And 03 No.S On Each Bollard. 1.0092 038 Twin Bollard Twin Bollards Corroded, Thinned And Holed, To Be Repaired As Per Survey .Details ( Dia Of Bollard Pipe: 270Mm, Height Of Bollard: 620Mm, Size Of Bollard Base / Foundation: 1140Mmx380mmx 220Mm; Doubler Plate Size: 1240Mmx500mm; Side Rods Of Bollard Pipe: 520Mmx40mmdia Rod; Dummy Plate 300Mm Dia X12mm Thick. 1.0093 039 Rubber Beading Rubber Beading Of Wt Doors , Hatches, Scuttles, Ventillation Flap Perished / Cracked To Be Renewed And Chalk Test To Be Proved. Rubber Beading Size: 45Mmx20mm; Specification As Per Sample ) 1.0094 040 Wt Doors Wt Door Clips To Be Overhauled And Fitted Back. Note: Each Door Fitted With 08 Clips 1.0095 041 Wt Hatch. ( A ) Wt Hatch Clips To Be Overhauled And Fitted Back. Note: Each Hatch Fitted With 08 Clips 1.0096 041 Wt Hatch ( B ) 10 In No Wt Hatch Clips Broken / Damaged. To Be Renewed. Mat. Ms 1.0097 042 Sky Light Ventilator / Sky Light To Be Overhauled And Fitted Back. 1.0098 043 Single Arm Davit ( A ) Overhauling Of Single Arm Davit Is To Be Carried Out, Prove For Satisfactory Opertaion. Note: Overhauling Includes Removal, Cleaning, Greasing And Refitment Of Wire Rope, Overhauling Of Gear Box. 1.0099 043 Single Arm Davit ( B ) The Centrifugal Brake Assembly ( Two Brake Shoes Lined With Friction Lining & Restrained By Spring On Each Shoe ) To Be Overhauled . Renew Brake Shoes, Friction Lining. Prove For Satisfactory Operation. 1.01 043 Single Arm Davit ( C ) Single Arm Boat Davit Motor Overhauling To Carry Out, Prove For Satisfactory Operation 1.0101 043 Single Arm Davit ( D ) Gear Box To Be Inspected, Flush Through The System. Fresh Oil To Be Charged . ( Oil Grade Sae-90 ) ( Oil Qty- 40 Ltrs ) ( Oil To Be Supplied By Firm ) 1.0102 043 Single Arm Davit ( E ) Dead Man Brake Assembly To Be Overhauled. Renew The Brake Shoes. Check Brake Drum And Clean Drum Surfaces. Prove Dead Man Brake Assembly For Satisfactory Operation. 1.0103 043 Single Arm Davit ( F ) Wire Ropes- Remove Old Grease & Lubricate With Fresh Grease. Grease To Be Applied To All Points. Renew Grease Nipples 1.0104 043 Single Arm Davit ( G ) Check The Functioning Of All Limit Switches. Renew Defective Limit Switches Prove For Satisfactory Operation. 1.0105 043 Single Arm Davit ( H ) Load Test Of Single Arm Boat Davit To Be Carried Out. 1.0106 044 Steel Wire Rope ( A ) Servicibilty Checks Of Steel Wire Rope Is To Be Carried Out And Renewed If Unserviceable And Load Tested Upto 1.5 Times Of Swl.As Per Inbr 1552 ( Swl- 1250 Kgs ) , Submit A Copy Of Load Test To This Office. 1.0107 044 Steel Wire Rope ( B ) Renewal Of Steel Wire Rope To Be Carried Out And Initial Load Test Certificate To Be Rendered 1.0108 044 Steel Wire Rope ( C ) Servicibilty Checks Of Steel Wire Rope ( Used For Remote Operation Of Brake ) Is To Be Carried Out . 1.0109 044 Steel Wire Rope ( D ) Renewal Of Steel Wire Rope To Be Carried Out And Initial Load Test Certificate To Be Rendered 1.011 045 Pipe Lines ( A ) Chemical Cleanig Of Soil And Fresh Water Pipe Lines At Various Places. Defetive Pipes To Repaired 1.0111 045 Pipe Lines ( B ) Renewal Of Soil And Fresh Water Pipe Lines To Be Carried Out 1.0112 046 Nwt Doors Nwt Doors At Various Locations To Be Repaired.Door To Be Prove For Smoth Open / Close Operation. 1.0113 047 Ventilation Following Mushroom Type Ventilators To Be Removed, Cleaned / Overhauled And Fitted Beck. ( A ) Dia: 550 Mm Dia- 02Nos ( B ) Dia - 360Mm Dia -03 Nos 1.0114 048 Towing Hook Towing Hook To Be Overhauled And Load Tested To 25 Tons . Note 1 -The Job Involves Overhaul Of Operating Handle. Note 2 - Load Test Will Be Undertaken By The Yard Certified Firm. Any Defects Occurred During Load Testing Will Be Rectified By The Firm. 1.0115 049 Tanks / Manhole ( A ) Manholes To Be Renewed As Per Survey Carried In Dl No. 003 Size Of Manhole: 720X520x08mm Thick 1.0116 049 Tanks / Manhole ( B ) 04 No.S Handles Of 10Mm Dia Rod And Length 400Mm Corroded / Thinned / Holed To Be Remewd 1.0117 049 Tanks / Manhole ( C ) Neoprene Rubber Joints Of 720Mmx520mmx06mm Perished / Deterioted To Be Renwed 1.0118 049 Tanks / Manhole ( D ) Nuts And Bolts / Studs Of 16Mm Dia And 50Mm Length - 20 No.S On Each Manhole. Mat Ss 1.0119 050 Nav Light Nav Light Foundation ( Port & Stbd ) Corroded, To Be Renewed. Size: 620Mmx620mmx300mm And Thickness 6Mm, Mat Ms 1.012 051 Drainage System ( A ) Chemical Cleaning & Repair Of Deck Drain Pipe Lines At Various Places , Note : Pipes / Fittings Should Be Secured With Rubber Packings And Clamps Uniformly 1.0121 051 Drainage System ( B ) 4 Soil Pipes Of Crew, Eds And Masters Bathroom To Be Removed Chemically Cleaned And Fit Back. 1.0122 052 Automatic Release Hook Provisioning And Fitment Of Arh In Boat Davit. Note: Arh To Comply With Ihq Policy Nc / Policy / H-136 / Equipment Dated 25 Oct 18. 1.0123 053 Foam Solution Supply Of Type 3% Afff Concentrate For Forming Mechanical Foam 1.0124 054 Deck Covering Deck Underlay ( Macrotech ) To Be Renewed Wherever Uprooted / Damaged In Accommodation Areas, Wheel House And Bathrooms. ( A ) Surface Preparation And Application Of Erop. And Mass 98. 1.0125 054 Deck Covering Deck Underlay ( Macrotech ) To Be Renewed Wherever Uprooted / Damaged In Accommodation Areas, Wheel House And Bathrooms. ( B ) Surface Preparation To Be Carried Out By Buffing On Mass 98 And Application Of Mass 96. 1.0126 054 Deck Covering Deck Underlay ( Macrotech ) To Be Preiared / Renewed At Uprooted / Damaged / Steel Renewed, Accommodation Areas, Wheel House And Bathrooms ( C ) Surface Preparation And Application Of Sealer Coat On Entire Area 1.0127 055 Chairs Chairs In Bridge And Master / Crew Cabin Damaged / Broken / Including Cushion & Roller Wheels Chairs Is To Be Replaced With Roller Chairs. As Per Sample. 1.0128 056 Lifebuoy Lifebuoys To Be Painted As Per Sample Including Lettering And Symbols. Size: 300Mmx100mmx06mm 1.0129 057 Life Raft Roller Beam Life Raft Roller Beams Leading From Weatherdeck To Life Raft Deck Corroded / Thinned / Holed. To Be Repaired. Mat- Ms Pipe, Dia Of The Pipe- 10 Cm 1.013 058 Liferraft Securing Stand Securing Stand Of Life Rafts Perished And Damaged. Same Are To Be Renewed Alongwith Rubber Lining And Supporting Frame, Including Fitment Of Hrg, Thickness- 06Mm. 1.0131 059 Awning ( A ) Repair Of Damaged Awning Shade Frame Of Gi Pipes And Fitment Of The Same On Weather Deck Area. 1.0132 059 Awning ( B ) Renewel Of Pvc Awning Over The Frame Alongwith Securing Rope. Mat - As Per Sample. 1.0133 060 Name Board ( A ) Tug Name Board ( Vessel Illuminating Board ) To Be Repaired. 1.0134 060 Name Board ( B ) Word Letter Of Tug Name On Bulwark Perished At Fwd And Stern , To Be Repaired / Renewed, Whererever Required, Tug Name Is To Be Painted With Flourocent Paint. 1.0135 061 Door Locks Mortise Lock Of Non Wt Door Defectice At Various Locations , All Defective Moritse Locks To Be Renewed. 1.0136 062 Wooden Paneling With Sunmica Wooden Paneling And Sunmica Damaged At Various Locations , To Be Renewed 1.0137 063 Mfmb Lagging Degutting And Regutting Of Mfmb Lagging At Accomodation Area, Wheel House To Be Carried Out. 1.0138 064 Sanitry System ( A ) Ss Wash Basin, Corroded / Thinned / Holed To Be Renewed. Note:- Quoted Repair Cost Shall Include Cost All Items. 1.0139 064 Sanitry System ( B ) Wc Commode Of Crew Ed And Master Cabin Corroded / Thinned / Holed. W / C To Be Renewed Note:- Quoted Repair Cost Shall Include Cost All Items. 1.014 064 Sanitry System ( C ) Wash Basin Drain Pipes Of Crew And Master Cabin Damaged To Be Renewed Note:- Quoted Repair Cost Shall Include Cost All Items. 1.0141 064 Sanitry System ( D ) Ss Tap: 1 / 2 Inch Damaged To Be Renewed. Note:- Quoted Repair Cost Shall Include Cost All Items. 1.0142 064 Sanitry System ( E ) Supply Pipes Deformed To Be Renewed. Mat : Pvc Note:- Quoted Repair Cost Shall Include Cost All Items 1.0143 064 Sanitry System ( F ) Drain Pipe: Mat-Ms, Dia- 2 Inch To Be Renewed. Note:- Quoted Repair Cost Shall Include Cost All Items 1.0144 064 Sanitry System ( G ) Overhaulling Of All Flushing Valves To Be Carried Out - Mat - Brass, Dia - 2 Note:- Quoted Repair Cost Shall Include Cost All Items 1.0145 064 Sanitry System ( H ) Mirror To Be Renewed. Note:- Quoted Repair Cost Shall Include Cost All Items 1.0146 064 Sanitry System ( J ) Shower Head To Be Renewed. Note:- Quoted Repair Cost Shall Include Cost All Items 1.0147 065 Foot Step Foot Step On Foxle Near Bollard Corroded / Thinned / Holed, Including Foundations , To Be Repairerd, As Per Survey Repert, Mat- Al Chequerd Plate. 1.0148 066 Panelling Ss Panelling In Bathrooms Damaged At Various Locations , Same To Be Repaired. ( Mat-Wood ) 1.0149 067 Kit Lockers Kit Lockers In Crew Cabin And Master Cabiin To Be Renewed. ( Mat-Crca ) 1.015 068 Mast Winch Mast Winch To Be Ovehaulled Including All Pulleys. 1.0151 069 Fisherman Plate Fisherman Plate Corroded / Thin / Holed , To Be Renewed Mat-Ms Fish Plate Size: 20X20 Inch, 10Mm Thickness 1.0152 070 Butterfly Nut Ss Butterfly Nuts And Tumbler Bolt Of Engine Room Sky Light & Exhaust Flaps Broken. To Be Renewed. Dia Of Bolt : 20 Mm & 6 Inch Length ( Mat-Ss ) 1.0153 071 Guard Rail And Stanchions Guard Rails And Stanchions On 01 & 02 Deck ( Port Side ) Corroded / Perished . To Be Repaired. ( Mat-Gi Pipe ) 1.0154 072 Mob Marker Mob Marker Stand On ( P&S ) Damaged . To Be Repaired. 1.0155 073 Ventilation Wire Mesh Of All Air Vent Corroded / Perished. To Be Renewed. 1.0156 074 Remote Oprating Valve Remote Operating Valve Of Fore Peak Tank, Jammed , To Be Ovehauled And Operation To Be Proved. 1.0157 075 Bulwark Doors Bulwarks Doors Including Hand Rails On Weather Deck Jammed / Dented / Damaged. To Be Repaired. 1.0158 076 Cleats Ms Cleats On ( P&S ) Bulwark Damaged, To Be Renewed As Per Sample 1.0159 077 Boxes Boxes Of Variuos Control Panel Corroded / Thinned / Holed At Varios Locations, To Be Renewed As Per Existing As Fitted Sample. ( Mat-Ms ) 1.016 078 Sofa Sofa Cushion Torned In Ed , Master And Crew Rest Room , To Be Renewed. 1.0161 079 Water Purifier Complete Servicing Of Water Purifier To Be Carried Out Including Piping Arrangement And Replacement Of All Type Of Filters. Work Includes Provisioning Of Following Spares Also :- ( A ) Ro Membrane Welded -02 , ( B ) Ro Membrane High Flow-02 ( C ) Inline Carbon Filter-02 , ( D ) Inline Sediment Filter- 02 , ( E ) Activated Carbon Filter ( Excel Elite ) , ( F ) Post Carbon Filter-02 1.0162 080 Fixed H2s Sensor ( A ) H2s Sensor To Be Callibrated. Note:- Trial Report Along With H2s Sensors Calibration Certificate By Oem To Be Submitted. 1.0163 080 Fixed H2s Sensor ( B ) H2s Sensor To Be Renewed. Note:- For New Sensors , Trial Report / Calibration Certificate By Oem To Be Submitted. 1.0164 081 Portable H2s Sensors. Calibration Of Portable H2s Sensors To Be Carried Out. Note:- Calibration Certificate By Oem To Be Submitted. 1.0165 082 Bunk Bunk In Crew Rest Room / Master Room Damaged To Be Repaired 1.0166 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 1.0167 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( A ) Cleaning Of Stp Main Tanks To Be Carried Out. The Main Tank Consist Of Integral Aeration Settling Tank, Disinfecting Compartment. Tanks To Be Completely Wahsed And Cleaned From Internally & Outside. Suitable Paint To Be Applied On Outside Surface Of Tank. 1.0168 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( B ) After Cleaning Tanks Internally , Main Tank To Be Coated With Rust Resistant Primer And Suitable Coat Of Paint. 1.0169 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( C ) Air Compressor To Be Overhauled And Prove For Satisfactory Operation 1.017 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( D ) Discharge Pump To Be Overhauled And Prove For Satisfactory Operation. 1.0171 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( E ) Flexible Hoses / Wire Breaded Hoses To Be Renewed. 1.0172 083 Eqpt / System: Sewage Treatment Plant Make / Model: M / S Wartsila / Hamworthy System Ltd. Model: Stc 02 ( F ) Complete Assembly And System Pipe To Be Painted Post Work Completion As Per Code. 1.0173 084 Misc 1.0174 084 Misc ( A ) Fire Hoses Brackets To Be Renewed. 1.0175 084 Misc ( B ) Fire Hoses Bracket Glass To Be Renewed 1.0176 084 Misc ( C ) Fire Hoses To Be Renewed. Hoses To Be Provided With Male & Female Couplings ( Coupling Material : Ss ) 1.0177 084 Misc ( D ) Name Tallies For Fire Extinguishers To Be Provisioned. ( Tallies To Be Prepared As Per Sample ) 1.0178 084 Misc ( E ) Fire Hydrants Coupling ( Male & Female ) To Be Renewed ( Material : Ss ) 1.0179 Engineering Work Package 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C Following Routines To Be Undertaken On Main Engines. Firm To Quote For Services And Material Required For Underatking Routines. Firm To Obtain Quote From Oem / Authorised Dealership For Spares And Services. Required Spares / Material To Be Provided By Firm For Underatking Each Dl Serials. Firm To Quote For Services And Material / Spares Columns In Each Dl Serial . Required Spares / Material To Be Provided By Firm For Underatking Dl Serials. 1.018 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C A ) Both Main Engine 3000 Hrly Routines To Be Undertaken As Per Oem Maintenance Schedule. Job Includes Replacement Of Lub Oil Filters, Fuel Oil Filters, Air Filters Elements To Be Renewed. Firm To Quote For Services, Spares, Consumables Required To Undertake 3000 Hourly Routines 1.0181 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C B ) Starting Air Motor To Be Overhauled Using Overhauling Kit. Gear Carrier, Planet Gear , Gear Ring, Pre Engaged Drive, Springs And O-Rings To Be Replaced With New. Firm To Quote For Services, Spares, Consumables Required To Undertake Job Overhauling Of Main Engine Starting Air Motor To Be Carried Out. Starting Air Motor To Be Proved For Optimum Performance. Overhauling Of Starting Air Motor To Be Carried By Authorised Oem Only. Make:- Tdi Turbostart , Cat , Part No 3829606 ( Port ) Rh Cw 1.0182 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C B1 ) Starting Air Motor To Be Overhauled Using Overhauling Kit. Gear Carrier, Planet Gear , Gear Ring, Pre Engaged Drive, Springs And O-Rings To Be Replaced With New. Firm To Quote For Services, Spares, Consumables Required To Undertake Job Overhauling Of Main Engine Starting Air Motor To Be Carried Out. Starting Air Motor To Be Proved For Optimum Performance. Overhauling Of Starting Air Motor To Be Carried By Authorised Oem Only. Make:- Tdi Turbostart , Cat , Part No 3982385 ( Stbd ) Lh Ccw 1.0183 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C F ) Main Engine Heat Exchangers ( Plate Type ) To Be Chemically Cleaned & Pressure Tested. The Liner And O-Rings Of Heat Exchanger To Be Renewed. Heat Exchanger To Be Proved For Satisfactory Performance. 1.0184 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C G ) Main Engine Staring Air Line Moisture Absorber To Be Renewed. Drain Valve To Be Renewed. 1.0185 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C H ) Overahuling Of Pressure Regulating Valve To Be Carried Out. Pressure Gauges For Upsteam & Downstream Valves To Be Replaced With New . Prv To Be Proved For Satisfactory Operation. 1.0186 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C J ) The Plates Of Fresh Water Heat Exchanger To Be Inspected. The Damaged Aluminium Plates And End Titanium Plates To Be Reconditioned And Machined. Suitable Repairs On Plates To Be Carried Out And Proven For Satisfactory Operation 1.0187 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C K ) Main Engine Coolant To Be Drained, Coolant System / Circuit To Be Cleaned Using Oem Recommended Solvent And Flushed Through. Job Involves Cleaning And Flushing Of Tanks Available For Main Engine Cooling System. 1.0188 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C M ) Fresh Coolant To Be Charged Into System. ( Coolant To Be Provided By Firm ) 1.0189 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C N ) Main Engine Sump To Be Drained, Sump To Be Cleaned And System To Be Flushed Through. 1.019 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C P ) Fresh Oil To Be Charged Into Main Engine System. ( Lub Oil Cat 15 W 40 , Lub Oil To Be Provided By Firm ) 1.0191 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C Q ) Main Engine Cooling Water Pump To Be Overhauled. Pump To Prove For Satisfacory Performance 1.0192 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C R ) Main Engine Cooling Water Pump To Be Replaced With New. 1.0193 1001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C S ) Main Engine Pre Lub Oil Pump To Be Overhauled. Pump To Prove For Satisfacory Performance 1.0194 1002 Eqpt:Diesel Generator, Make: M / S Koel , Model: 6R1080ta, 100 Kva The Routines Includes Supplying Of Required Materials / Spares And Services. Firm To Quote For Services And Material Required For Underatking Routines. Firm To Obtain Quote From Oem / Authorised Dealership For Spares And Services. Required Spares / Material To Be Provided By Firm For Underatking Each Dl Serials. Firm To Quote For Services And Material / Spares Columns In Each Dl Serial . Required Spares / Material To Be Provided By Firm For Underatking Dl Serials. 1.0195 1002 Eqpt:Diesel Generator, Make: M / S Koel , Model: 6R1080ta, 100 Kva ( A ) Fresh Water Pump To Be Renewed. Pump To Prove For Satisfactory Performance 1.0196 1002 Eqpt:Diesel Generator, Make: M / S Koel B ) Carry Out Cleaning And Pressure Testing Of Heat Exchangers. Zinc Plugs To Be Replaced. 1.0197 1002 Eqpt:Diesel Generator, Make: M / S Koel C ) Da System To Be Flushed Through. Fresh Oil To Be Charged Into System. ( Lub Oil 15 W 40, ( Lub Oil To Be Provided By Firm ) 1.0198 1002 Eqpt:Diesel Generator, Make: M / S Koel D ) Replace The Lub Oil Filter Catridges. ( Firm To Quote For Material / Spares ) 1.0199 1002 Eqpt:Diesel Generator, Make: M / S Koel E ) Replace The Element Of Dry Type Air Cleaner. ( Firm To Quote For Material / Spares ) 1.02 1002 Eqpt:Diesel Generator, Make: M / S Koel F ) Replacement Of The V Belts To Be Carried Out. ( Firm To Quote For Material / Spares ) 1.0201 1002 Eqpt:Diesel Generator, Make: M / S Koel G ) Replace The Cartridge Of Fuel Filter. 1.0202 1002 Eqpt:Diesel Generator, Make: M / S Koel H ) Engine Coolant To Be Drained, Coolant Circuit To Be Cleaned And System To Be Flushed Through. Fresh Coolant To Be Charged Into System. ( Coolant To Be Provided By Firm ) 1.0203 1002 Eqpt:Diesel Generator, Make: M / S Koel J ) Replacement Of All Fuel Oil Hoses To Be Carried Out 1.0204 1002 Eqpt:Diesel Generator, Make: M / S Koel K ) Replacement Of Thermostat Element To Be Carried Out 1.0205 1002 Eqpt:Diesel Generator, Make: M / S Koel M ) Replacement Of High Pressure Fuel Pipes To Be Carried Out. Seal Ring / Orings And Copper Washer To Be Renewed. 1.0206 1002 Eqpt:Diesel Generator, Make: M / S Koel N ) Replacement Of The O Ring Of The Drain Plugs To Be Carried Out 1.0207 1002 Eqpt:Diesel Generator, Make: M / S Koel P ) Replacement Of The Rubber Hoses Of Charge Air Cooler Inlet & Outlet Pipes To Be Carried Out. 1.0208 1002 Eqpt:Diesel Generator, Make: M / S Koel Q ) Replacement Of Sealing Rings Of Exahust Manifold To Be Carried Out 1.0209 1002 Eqpt:Diesel Generator, Make: M / S Koel R ) Replacement Of Expansion Tank To Be Carried Out. Necessary Fitment Along With Tank Cap To Be Carried Out. 1.021 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion, Model:Vsp 21R5 / 150-2 The Routines Includes Supplying Of Required Materials / Spares And Services. The Firm To Obtain Quote From Oem / Authorised Dealership For Spares And Services And Quote For Each Serial Under Services And Material / Spares Columns. 1.0211 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion, Model:Vsp 21R5 / 150-2 A ) 10000 Hourly Routines To Be Undertaken On Both Voith Turbo System. Vsp System To Be Proved For Satisfactory Performance Post Complition Of Routines. Firm To Quote For Services, Spares, Consumables Required To Undertake 10000 Hourly Routines On Voith Propulsion System. Routines Should Involves Follwoing Inspection And Checks :- I ) Visual Assessment Of Both Vsp System Ii ) Checks Propeller In Standstill Condition Iii ) Oil Level Of Vsp System Iv ) Oil Condition V ) Condition Of System Pipe Lines. Repair Of Defective Connection And Joints Vi ) Filter Checks And Cleaning Of Filters. Vii ) Checks Of Shaft Line Viii ) Inspection Of Turbo Coupling Ix ) Inspection Of Shafting Bearings X ) Inspection Of Tooth Bow Coupling Xi ) Inspection Of Of Main Gear & Flange Gear Xii ) Checks Of The Contact Patterns Of Main Gear & Flange Gear Xiii ) Measuring Of Clearances Checks With Vessel In Dry Dock Xiv ) Inspection Of All Anodes. 1.0212 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion B ) Oil Removal & Fushing Out From Vsp System And Top Up With Iso Vg 150 Oil. Oil To Be Provided By Firm . 1.0213 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion C ) Cutting Of Guard Plate As Per Marking Underneath The Blade Tip To Facilitate Removal Of Blade To Be Carried Out 1.0214 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion D ) Welding Of Eyepads On Ship Hull Near Voith For Lifting Of Blade 1.0215 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion E ) Removal & Flushing Out Of Gear Coupling Oil To Be Carried Out And Both System To Be Charged With Iso Vg 460. Oil To Be Provided By Firm. 1.0216 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion F ) Removal Of 10 Nos Blades From Position And Shifting Of Blades To Work Shop 1.0217 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion G ) Removal Of Bearing, Packing Ring, Gland Ring Of Vsp Systems To Be Undertaken. Items To Be Shifted To Designated Place For Carrying Out Cleaning And Repair.Necessary Cleaning And Repairs Of Items To Be Undertaken.Post Cleaning And Repairs, Items To Fit Back In Position. 1.0218 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( H ) Pedestal Bearing Oil To Be Drained & System To Be Flushed Out. Post Flushing / Cleaning Oil To Be Topped Up With Iso Vg 100 Oil To Be Provided By Firm. 1.0219 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( J ) Check And Record Axial And Torsional Readings And Zero Position Of Blades. 1.022 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( K ) Seal Leak Test To Be Carried Out. Necessary / Suitable Repair Of Mating Surfaces To Be Undertaken And Defect To Be Rectified. 1.0221 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( M ) Inspection, Cleaning & Paint To Be Applied At Following Areas :- I ) Bottom Of Rotor Casing Ii ) Rotor Casing Iii ) Well Area Iv ) Propeller Casing V ) Driving Sleeve 1.0222 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( N ) All Lub Oil Filters To Be Replaced With New Filters. ( Filter To Be Supplied By Firm ) 1.0223 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( P ) Sacrificial Anodes To Be Replaced With New Anodes. Firm To Supply New Anodes. 1.0224 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( Q ) Condition Of The Propeller Blades To Be Checked.Cleaning Of Blades To Be Carried Out. Post Cleaning Dye Penetration Test Of Blades To Be Undertaken. Clearances Of Blades To Be Measured. Condition Of Blade Seals To Be Inspected.Constraint Test Of Blade Seals To Be Carried Out 1.0225 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( R ) Vsp System Turbo Coupling Oil To Be Drained. System To Be Flushed With Fresh Oil & Renewal Of System Oil To Be Undertaken. Turbo Coupling Oil To Be Renewed. Iso Vg 32 ( Oil To Be Supplied By Firm ) 1.0226 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( S ) Health Checks In Floating And Running Condition To Be Carried Out Adjustment Of Linkages From Bridges To Voith System To Be Undertaken 1.0227 1003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion ( T ) Oil Leakages Observed At Gear Pump Housing & System Pipe Lines. Pipe Lines To Be Removed & O-Rings / Seal Rings To Be Renewed. Defect To Be Rectified And Leakges To Be Arrested. Fitment Of Pipelines To Be Carried Out. 1.0228 1004 Eqpt:Fire / Bilge Pump Make : Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- Ma843kks-6, Cap: 30 Cmh 1.0229 1004 Eqpt:Fire / Bilge Pump Make : Be Pumps, A ) Carry Out Overhauling Of Pumps. Dismantle Pump Completely. Examine All Parts For Any Damage / Wear . Replacement Of Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys, O-Rings And Gaskets To Be Carried Out. Reconditioning Of Damaged Parts Including Shaft & Impleller, Pump Housing To Be Done. ( The Cost Of Spares / Material Required For The Overhauling & Reconditioning To Be Included In Cost Of Spares / Material 1.023 1004 Eqpt:Fire / Bilge Pump B ) Suction And Discharge Pressure Gauges To Be Replaced With New Guages ( Glecerin Filled ) Range -30 To 30 Psi And 0 To120 Psi . 1.0231 1004 Eqpt:Fire / Bilge Pump C ) Replacement Of Instrumentation Gauge Pipes With Suitable End Fittings . Mat: Cuni Dia:1 / 4”. 1.0232 1004 Eqpt:Fire / Bilge Pump D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0233 1004 Eqpt:Fire / Bilge Pump E ) Coupling Guards To Be Repaired & Suitable Primer & Paint To Be Applied. 1.0234 1004 Eqpt:Fire / Bilge Pump F ) Foundationframe For Pump To Be Renewed. Fabrication Of New Channels To Be Done ( Thickness 6Mm, Length 3Mtrs ) . Suitable Primer And Paint To Be Applied. 1.0235 1004 Eqpt:Fire / Bilge Pump G ) Carry Out Alignment Of Pump With Motor And Prove For Satisfactory Performance With General Fire & Bilge System. 1.0236 1004 Eqpt:Fire / Bilge Pump H ) Replacement Of Impeller To Be Carried Out 1.0237 1004 Eqpt:Fire / Bilge Pump J ) Replacement Of Pump Shaft To Be Carried Out 1.0238 1005 Eqpt: Gs Pump Make : Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- Ma843kks-6, Cap: 35Cmh 1.0239 1005 Eqpt: Gs Pump Make : Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- Ma843kks-6, Cap: 35Cmh A ) Carry Out Overhauling Of Pumps. Dismantle Pumps Completely. Examine All Parts For Any Damage / Wear . Replacement Of Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys, O-Rings And Gaskets To Be Varried Out. Reconditioning Of Damaged Parts Including Shaft & Impleller, Pump Housing To Be Done. ( The Cost Of Spares / Material Required For The Overhauling & Reconditioning To Be Included In Cost Of Spares / Material ) 1.024 1005 Eqpt: Gs Pump Make : Be Pumps B ) Suction And Discharge Pressure Gauges To Be Replaced With New Guages ( Glecerin Filled ) Range -30 To 30 Psi And 0 To120 Psi . 1.0241 1005 Eqpt: Gs Pump Make : Be Pumps C ) Replacement Of Instrumentation Gauge Pipes With Suitable End Fittings . Mat: Cuni Dia:1 / 4”. 1.0242 1005 Eqpt: Gs Pump Make : Be Pumps D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0243 1005 Eqpt: Gs Pump Make : Be Pumps E ) Coupling Guards To Be Fabricated & Suitable Primer & Paint To Be Applied. 1.0244 1005 Eqpt: Gs Pump Make : Be Pumps F ) Foundation To Be Repaired. Fabrication Of New Channels To Be Done ( Thickness 6Mm, Length 3Mtrs ) . Suitable Primer And Paint To Be Applied. 1.0245 1005 Eqpt: Gs Pump Make : Be Pumps G ) Carry Out Alignment Of Pump With Motor And Prove For Satisfactory Performance 1.0246 1005 Eqpt: Gs Pump Make : Be Pumps Eqpt:Fire / Bilge Pump H ) Replacement Of Impeller To Be Carried Out 1.0247 1005 Eqpt: Gs Pump Make : Be Pumps Eqpt:Fire / Bilge Pump J ) Replacement Of Pump Shaft To Be Carried Out 1.0248 1005 Eqpt: Gs Pump Make : Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- Ma843kks-6 K ) Replacement Of Pump To Be Carried Out. 1.0249 1006 Eqpt: Voith Cooling Water Pumps Make: Best & Crompton Pumps, Type-Cetrifugal Motor Driven, Model-Cnw 100-200 1.025 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, Type-Cetrifugal Motor Driven, Model-Cnw 100-200 A ) Carry Out Overhauling Of Pumps. Dismantle Pumps Completely. Examine All Parts For Any Damage / Wear . Replacement Of Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys, O-Rings And Gaskets To Be Varried Out. Reconditioning Of Damaged Parts Including Shaft & Impleller, Pump Housing To Be Done. ( The Cost Of Spares / Material Required For The Overhauling & Reconditioning To Be Included In Cost Of Spares / Material ) 1.0251 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, B ) Suction And Discharge Pressure Gauges To Be Replaced With New Guages ( Glecerin Filled ) Range -30 To 30 Psi And 0 To120 Psi . 1.0252 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, C ) Replacement Of Instrumentation Gauge Pipes With Suitable End Fittings . Mat: Cuni Dia:1 / 4”. 1.0253 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0254 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, E ) Coupling Guards To Be Fabricated & Suitable Primer & Paint To Be Applied. 1.0255 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, F ) Foundation To Be Repaired. Fabrication Of New Channels To Be Done ( Thickness 6Mm, Length 3Mtrs ) . Suitable Primer And Paint To Be Applied. 1.0256 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, G ) Carry Out Alignment Of Pump With Motor And Prove For Satisfactory Performance 1.0257 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, H ) Replacement Of Impeller To Be Carried Out 1.0258 1006 Eqpt: Voith Cooling Water Pumps Make: Best&Crompton Pumps, J ) Replacement Of Pump Shaft To Be Carried Out 1.0259 1006 Eqpt: Voith Cooling Water Pumps Make: Best & Crompton Pumps, Type-Cetrifugal Motor Driven, Model-Cnw 100-200 J ) Replacement Of Pump To Be Carried Out.Shipyard To Procure And Replace The Existing Pump Along With Coupling, Mounts. The Work To Include Procurment, Fitment And Performace Trials Of The New Pump 1.026 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- A01210k-1B-304, Cap: 1 Cmh 1.0261 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- A01210k-1B-304, Cap: 1 Cmh A ) Carry Out Overhauling Of Pumps. Dismantle Pumps Completely. Examine All Parts For Any Damage / Wear . Replacement Of Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys, O-Rings And Gaskets To Be Carried Out. Reconditioning Of Damaged Parts Including Shaft & Impleller, Pump Housing To Be Done. ( The Cost Of Spares / Material Required For The Overhauling & Reconditioning To Be Included In Cost Of Spares / Material 1.0262 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps B ) Suction And Discharge Pressure Gauges To Be Replaced With New Guages ( Glecerin Filled ) Range -30 To 30 Psi And 0 To120 Psi . 1.0263 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps C ) Replacement Of Instrumentation Gauge Pipes With Suitable End Fittings . Mat: Cuni Dia:1 / 4”. 1.0264 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0265 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps E ) Coupling Guards To Be Fabricated & Suitable Primer & Paint To Be Applied. 1.0266 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps F ) Foundation To Be Repaired. Fabrication Of New Channels To Be Done ( Thickness 6Mm, Length 3Mtrs ) . Suitable Primer And Paint To Be Applied. 1.0267 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps G ) Carry Out Alignment Of Pump With Motor And Prove For Satisfactory Performance . 1.0268 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps H ) Replacement Of Impeller To Be Carried Out 1.0269 1007 Eqpt: Domestic Fresh Water Pumps Make: Be Pumps, Type-Cetrifugal Self Priming Motor Driven, Model- A01210k-1B-304, Cap: 1 Cmh J ) Replacement Of Pump To Be Carried Out. 1.027 1008 Eqpt: Salvage Pump Make: Best & Crompton, Model- Bwl 1525, Type: Centifugal, Self Priming Engine Driven, Cap: 200 Cmh 1.0271 1008 Eqpt: Salvage Pump Make: Best & Crompton, Model- Bwl 1525, Type: Centifugal, Self Priming Engine Driven, Cap: 200 Cmh A ) Carry Out Overhauling Of Pumps. Dismantle Pumps Completely. Examine All Parts For Any Damage / Wear . Replacement Of Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys, O-Rings And Gaskets To Be Carried Out. Reconditioning Of Damaged Parts Including Shaft & Impleller, Pump Housing To Be Done ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0272 1008 Eqpt: Salvage Pump B ) Suction And Discharge Pressure Gauges To Be Replaced With New Guages ( Glecerin Filled ) Range -30 To 30 Psi And 0 To120 Psi . 1.0273 1008 Eqpt: Salvage Pump C ) Replacement Of Instrumentation Gauge Pipes With Suitable End Fittings . Mat: Cuni Dia:1 / 4”. 1.0274 1008 Eqpt: Salvage Pump D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0275 1008 Eqpt: Salvage Pump E ) Coupling Guards To Be Fabricated & Suitable Primer & Paint To Be Applied. 1.0276 1008 Eqpt: Salvage Pump F ) Foundation To Be Repaired. Fabrication Of New Channels To Be Done ( Thickness 6Mm, Length 3Mtrs ) . Suitable Primer And Paint To Be Applied. 1.0277 1008 Eqpt: Salvage Pump G ) Carry Out Alignment Of Pump & Prove For Satisfactory Performance 1.0278 1008 Eqpt: Salvage Pump H ) Replacement Of Impeller To Be Carried Out 1.0279 1008 Eqpt: Salvage Pump J ) Replacement Of Pump Shaft To Be Carried Out 1.028 1008 K ) Carry Out Overhauling Of Liquid Ring Priming Pump. Pump To Be Prove For Satisfactory Performance. Double Row Deep Groove Ball Bearings, Mechanical Seal, Gaskets To Be Replaced With New, 1 / 4 Bsp Non Return Valves, And 1 / 4 Copper Tubes To Be Replaced. 1.0281 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1, Type: 3 Cycles, Inline Diesel Engine, Power: 42 Hp Qty : 1 No. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0282 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 A ) Engine Lub Oil To Be Drained, Sump To Be Cleaned & Fresh Lub Oil To Be Charged In Sump. Lub Oil 15W40, Qty-100 Ltrs ( Lub Oil To Be Provided By Firm ) 1.0283 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1, B ) Replacement Of Air Filter To Be Carried Out . ( Filters To Be Provided By Firm 1.0284 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1, Diesel Generator, Make-Greaves, Model-3G11na, C ) Radiator Fins To Be Cleaned. 1.0285 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 D ) Renewal Coolant Inhibitor With Zinc Plugs To Be Carried Out. 1.0286 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 E ) Replacement Of Engine Oil Filters, & Fuel Oil Filters To Be Carried Out. ( Filters To Be Provided By Firm ) 1.0287 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 F ) Valve Clearance To Be Checked And Adjusted 1.0288 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 G ) Tightening Of All External Fasteners To Be Checked & Tightned If Necessary. 1.0289 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 H ) Injectors To Be Overhauled. 1.029 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 J ) Injectors To Be Replaced With New. 1.0291 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 K ) Engine Cooling Water With Additives To Be Replaced. Qty-100 Ltrs, Coolant To Be Provided By Firm ) 1.0292 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 L ) Replacement Of Belts To Be Carried Out. 1.0293 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 M ) Engine Starting Motor To Be Overhauled And Prove For Satidfactory Operation. 1.0294 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 N ) Cooling Fresh Water Pump To Be Overhauled And Prove For Satidfactory Operation. 1.0295 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( P ) Replace All Rubber Hoses & Rubber Clips. ( Qty-06 ) 1.0296 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( Q ) Remove & Chemical Cleaning Of Lub Oil Cooler To Be Carried Out.Replacement Of Gasket, Seals / O Rings T Be Undertaken. Cooler To Be Pressure Tested & Prove For Satisfactory Performance. 1.0297 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( R ) Radiator To Be Cleaned With Air. ( Do Not Use Water & Chemicals For Cleaning ) .& Radiator Pressure Cap To Be Replace With Rubber Ring. 1.0298 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( S ) Fuel Shut Off Solenoid Valve To Be Overhauled. 1.0299 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( T ) Coolant Replinish Tank To Be Repaired / Fabricated 1.03 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( U ) Post Completion Of Routine, Engine To Be Proved For Satisfactory Perfomance 1.0301 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 Following Gauges Of Dg Control Panel To Be Renewed ( V ) Lub Oil Pressure Gauge. ( Range - 0 To 4 Kg / Cm2 ) 1.0302 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 Following Gauges Of Dg Control Panel To Be Renewed ( W ) Fresh Water Pressure Gauge. ( Range - 0 To 4 Kg / Cm2 ) 1.0303 1008 ( A ) Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( X ) Ignition Switch With Key Is Malfunctioning. Defect To Be Rectified & Operation Of Engine Using Ignition Switch Key To Be Proved. 1.0304 1009 Eqpt : Fuel Oil Transfer Pump, Make : Raysons, Model-Rgp 2 Mt , Type: Rotary Gear Pump, Cap: 02 Cmh 1.0305 1009 Eqpt : Fuel Oil Transfer Pump, Make : Raysons, Model-Rgp 2 Mt , Type: Rotary Gear Pump, Cap: 02 Cmh A ) Carry Out Overhauling Of Pump And Dismantle Pump Completely. Examine All Parts For Wear. Mechanical Seal, Bearings, Bearing Brackets, Bearing Bushes, Shaft Sleeve, Keys And Gaskets. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0306 1009 Eqpt : Fuel Oil Transfer Pump B ) Suction And Discharge Pressure Gauges ( Glecerin Filled ) To Be Renewed. Range -30 To 30 Psi And 0 To120 Psi . 1.0307 1009 Eqpt : Fuel Oil Transfer Pump C ) Overhauling Of Relief Valve To Be Carried Out & Reset Relief Valve After Overhaul . ( Set Pr.-5Kg / Cm2 ) 1.0308 1009 Eqpt : Fuel Oil Transfer Pump D ) Coupling Assembly Between Pump & Motor To Be Renewed. Pump Coupling Consist Of Two Metal Hubs And Hard Rubber / Neoprene Insert. 1.0309 1009 Eqpt : Fuel Oil Transfer Pump E ) Instrumentation Gauges Pipes With Suitable End Fittings To Be Renewed. Mat: Cuni Dia:1 / 4” 1.031 1009 Eqpt : Fuel Oil Transfer Pump F ) Carry Out Alignment Of Pump With Motor And Pump To Be Proved For Satisfactory Performance Post Work Completion. 1.0311 1010 Eqpt : External Fire Fighting Pump Make : Jason Engineering As, Model: 250 X 350 Ogf, Power Consumption: 772 Kw, Cap: 1500 Cmh. 1.0312 1010 Eqpt : External Fire Fighting Pump Make : Jason Engineering As, Model: 250 X 350 Ogf, Power Consumption: 772 Kw, Cap: 1500 Cmh. A ) Carry Out Overhauling Of Pump And Renew Follwing Parts :-Dismantle Pump Completely. Examine All Parts For Wear.Shaft And Impeller To Be Cleaned And Polished, Renew Wear Ring, Bushes, Mechanical Seals, Bearings, Sealing Rings, Keys , Gland Packing And Gaskets. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0313 1010 Eqpt : External Fire Fighting Pump B ) Carry Out Alignment Of Pump With Gear Box And Pump To Be Proved For Satisfactory Performance Post Work Completion.. 1.0314 1010 ( A ) Eqpt : Fi-Fi Pump Suction Line Valves, 300 Dia, Type: Bvkx Water Butter Fly Valve, Model : Gibson Bvk1-Bvka Wafer. A ) Carry Out Overhauling Of Flap Valves . Valves To Be Prove For Satisfactory Operation. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0315 1010 ( A ) Eqpt : Fi-Fi Pump Suction Line Valves, 300 Dia, Type: Bvkx Water Butter Fly Valve, Model : Gibson Bvk1-Bvka Wafer. B ) Renew Solenoid Valve. 1 / 4-5 / 2 24V Dc Solenoid Valve , Make: Janatics Solenoid Valves 5 / 2 Way With 2 Coils, . 1.0316 1010 ( A ) Eqpt : Fi-Fi Pump Suction Line Valves, C ) Valves To Be Pressure Tested, Up To 1.5 Times Of Working Pressure And Proved Opening And Closing Through Manual And Auto Mode Operations With Control Pannel. 1.0317 1010 ( B ) Eqpt : Fi-Fi Pump Discharge Line Valves, 250 Dia, Type: Bvkx Water Butter Fly Valve, Model : Gibson Bvk1-Bvka Wafer. A ) Carry Out Overhauling Of Valves And Renew Following Parts : Solinoid Valves 5 / 2 Way With 2 Coils, Gascuts, And Hand Wheel Lock Pins. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0318 1010 ( B ) Eqpt : Fi-Fi Pump Discharge Line Valves B ) Valves To Be Pressure Tested, Up To 1.5 Times Of Working Pressure And Proved Opening And Closing Through Manual And Auto Mode Operations With Control Pannel. 1.0319 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps : Eureka Pumps 250X350 Dgf, Model Df A6468-000, 182.02, 45Tmb1480958 Reduction Gear Box: Make - Jason Engg, Model - 255Vk-1.12-Ccw-02, Sl No-1881-56-11 A ) Check And Inspection The Gear Mechanism Profile Of Gears Teeth In Gear Box. 1.032 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps : Eureka Pumps 250X350 Dgf, Model Df A6468-000, 182.02, 45Tmb1480958 Reduction Gear Box: Make - Jason Engg, Model - 255Vk-1.12-Ccw-02, Sl No-1881-56-11 B ) Renewal Of Oil Filters And Oil Pump To Be Carried Out 1.0321 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps : Eureka Pumps 250X350 Dgf, Model Df A6468-000, 182.02, 45Tmb1480958 Reduction Gear Box: Make - Jason Engg, Model - 255Vk-1.12-Ccw-02, Sl No-1881-56-11 C ) Oil Cooler Shell And Tube Type Oil Cooler To Be Chemical Cleaned, Repaired, Renual Of Gascuts, And Pressure Testting Up To 1.5 Times Of Working Pressure. 1.0322 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps : Eureka Pumps 250X350 Dgf, Model Df A6468-000, 182.02, 45Tmb1480958 Reduction Gear Box: Make - Jason Engg, Model - 255Vk-1.12-Ccw-02, Sl No-1881-56-11 D ) Servicing Of Hydraulic System Manifold And Renew Suitable Orifaces Placed In Out Put Manifold Lines. 1.0323 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps E ) Renew 24V Dc 2 Way Solenoid Valve. 1.0324 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps F ) Renew External Hydraulic Pipe Lines Size 1 / 4 Mat: Ss With Suitable End Fittings. 1.0325 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps G ) Renew Lub Oil, Clutch In And Temperature Gauges Range: 0-10 Bar, 0-50 Bar, 0-100 Degree C 1.0326 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps H ) Flexible Coupling Between Fifi Pump And Main Engine To Be Renewed. Suitable New Flexible Coupling To Be Supplied By Firm. 1.0327 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps J ) Renew Gear Box Oil With Fresh Oil. ( Oil Grade Servo System 68, Oil To Be Supplied By Firm ) 1.0328 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps K ) Carry Out Alignment Of Transmission Gear Box With Engine. 1.0329 1010 ( C ) Eqpt : Fifi Pump Power Take Off Assembly Pumps L ) Adjust Prsssure Relief Valve & Pressure Restrictor Valves And Transmission Gear Box To Be Proved For Satisfactory Perfomance Post Work Completion. 1.033 1010 ( D ) Fire Monitors Series Fm200hjf-V , And Hydraulic Monitor Control . Qty:-2Nos. A ) Fire Monitors And Hydraulic Monitor Control To Be Overhauled, And Renew Following Parts :Solenoid Valves, High Pressure Hoses, Limit Switches, O-Rings, Adapters, And Gaskets. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0331 1010 ( D ) Fire Monitors Series Fm200hjf-V B ) Drain Hydraullic Oil From Power Pack Oil Holding Tank, Tank To Be Cleaned, Flushed And Renew With Fresh Hydr Oil. Iso Vg 32. ( Supplied By Firm ) , Qty-210Ltrs 1.0332 1010 ( D ) Fire Monitors Series Fm200hjf-V C ) Carry Out Alignment Of Power Pack Assembly And Fire Monitors To Be Proved For Satisfactory Performance Post Work Completion. 1.0333 1011 Eqpt: Semi Rotor Hand Pumps, Make: M / S Westindia Traders . 1.0334 1011 Eqpt: Semi Rotor Hand Pumps, Make: M / S Westindia Traders . A ) Pumps To Be Overhauled And Proved For Satisfactory Operation. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0335 1011 Eqpt: Semi Rotor Hand Pumps B ) Dismantle And Clean Pumps Internally, Renew Wear Down Parts . 1.0336 1011 Eqpt: Semi Rotor Hand Pumps C ) Pump Handles To Be Replaced With New. 1.0337 1012 Eqpt: Dd Compressor Engine Make: Hatz Diesel, Model- Ib20-6. 1.0338 1012 Eqpt: Dd Compressor Engine Make: Hatz Diesel, Model- Ib20-6. A ) Overhauling Of Engine To Be Carried Out. Injector To Be Renewed ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0339 1012 Eqpt: Dd Compressor Engine B ) Calibration Of Fip Assembly To Be Carried Out. Fip Assembly To Be Prove For Satidfactory Performance . 1.034 1012 Eqpt: Dd Compressor Engine C ) Drain Lub Oil Sump, Clean And Charge With New Oil. ( Supplied By Firm ) Qty-20 Ltrs 1.0341 1012 Eqpt: Dd Compressor Engine D ) Replacement Of Air Intaake Element, Fuel Filter Element, And Lub Oil Filter Element To Be Carried Out. ( Firm To Supply Filters ) 1.0342 1012 Eqpt: Dd Compressor Engine E ) Engine To Be Proved For Satisfactory Performance Along With Compressor Post Work Completion. 1.0343 1013 Eqpt: Air Compressor , Make: Atlas Copco, Model-Lt5-60Ke ( Qty-02 Nos ) , Model-Lt3-30Ke ( Qty-01 Nos ) , Type: 2 Stage Reciprocating , Capacity:- 12.4 Cmh At 30 Bar. 1.0344 1013 Eqpt: Air Compressor , Make: Atlas Copco, Model-Lt5-60Ke, Type: 2 Stage Reciprocating , Capacity:- 12.4 Cmh At 30 Bar. ( A ) Complete Overhauling Of Compressors To Be Carried Out. Renew Filters And Water Seperators. Renew Compressor Belts. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0345 1013 Eqpt: Air Compressor , Make: Atlas Copco B ) Renew Both Big End And Small End Bearings Of Connecting Rod . 1.0346 1013 Eqpt: Air Compressor , Make: Atlas Copco, C ) Air Compressor Lub Oil Sump To Be Drained, Cleaned, And New Oil To Be Charged In Sump. ( Oil To Be Supplied By Firm, Lub Oil- Atlas Copco Piston Fluid, Lubricant For Le / Lt Piston Compressors ) , Qty-40 Ltrs 1.0347 1013 Eqpt: Air Compressor , Make: Atlas Copco D ) Piston Rings To Be Renewed. 1.0348 1013 Eqpt: Air Compressor , Make: Atlas Copco E ) Air Inlet Filter Element And Head Gaskets To Be Renewed. 1.0349 1013 Eqpt: Air Compressor , Make: Atlas Copco F ) Renew Pressure Switches And Set Required Pressures ( Cut In 20 And Cut Out At 30 Bar ) . 1.035 1013 Eqpt: Air Compressor , Make: Atlas Copco G ) Chemical Cleaning And Pressure Testing Of Air Bottles To Be Carried Out Capacity: 500Ltrs Tp: 45 Bar, Air Bottles To Be Removed And Taken To Designated Place At Firm Workshop. Post Cleaning And Testing Air Bottles To Be Fitted In Original Position Onboard 1.0351 1013 Eqpt: Air Compressor , Make: Atlas Copco H ) Calibrate Relief Valves On Air Bottles Set Presure Is 45 Bar. 1.0352 1013 J ) Renew Air System Drain Line Ball Valves ( Dia 20 Mm ) 1.0353 1013 K ) Renew Air System Inlet / Outlet Ball Valves ( Dia 50Mm ) 1.0354 1013 M ) Fabrication Of The Foundation Frame And Painting To Be Done. 1.0355 1013 N ) Replace Shock And Vibration Mounts. 1.0356 1013 P ) Carry Out Alignment Of Compressor With Motor And To Be Proved For Satisfactory Performance Of Capacity Trails. 1.0357 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval, Model: P605, Sl.No: 4215658, Qty-01 Nos ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0358 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval, A ) Overhauling Of Purifier To Be Carried Out. Inspection Of Separator Bowl, Inlet / Outlet And Operating Water System To Be Done. Defetive Parts To Be Renewed.. 1.0359 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval, B ) Lub Oil Sump To Be Drained, Cleaned, And New Oil To Be Charged In Sump. ( Supplied By Firm ) . ( Qty-20 Ltrs ) 1.036 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval C ) Replace Flexible Hoses Of Water And Fuel Lines. 1.0361 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval D ) Replacement Of Bearings, Seals, Buffers And Gaskets In Drive System. 1.0362 1014 Eqpt: Fuel Oil Purifier, Make: Alfa Laval E ) Purifier To Be Proved For Satisfactory Performance 1.0363 1015 Eqpt: Oil Water Seperator, Make: Rwo, Model: Skit-S-Dev 0.25, Sl.No: 13443, Capacity: 0.25M3 / Hr 1.0364 1015 Eqpt: Oil Water Seperator, Make: Rwo A ) Repalcement Ppm Monitor To Be Carried Out. 1.0365 1015 Eqpt: Oil Water Seperator, Make: Rwo B ) Replacement Of Measuring Shell To Be Carried Out. 1.0366 1015 Eqpt: Oil Water Seperator, Make: Rwo C ) Cleaning Of Primary And Secondary Tanks To Be Carried Out & Internal Painting To Be Undertaken 1.0367 1015 Eqpt: Oil Water Seperator, Make: Rwo D ) Replacement Of Filters In Primary And Secondary Tanks To Be Carried Out. 1.0368 1015 Eqpt: Oil Water Seperator, Make: Rwo E ) Overhauling Of Discharge Pump To Be Carried Out. Dismantle Pump Completely. Examine Parts For Wear.Shaft And Impeller To Be Cleaned And Polished, Renew Wear Ring, Bushes, Mechanical Seals, Bearings, Sealing Rings, Keys , Gland Packing And Gaskets. Pump To Be Proved For Satisfactory Performance. ( The Cost Of Spares / Material Required For The Overhauling To Be Included In Cost Of Spares / Material ) . 1.0369 1015 Eqpt: Oil Water Seperator, Make: Rwo F ) Oily Water Seperator To Be Proved For Satisfactory Performance Post Work Completion. 1.037 1016 Eqpt: Harbour Diesel Generator, Make: M / S Koel , Model: 4R1040 T 1.0371 1016 Eqpt: Harbour Diesel Generator, Make: M / S Koel , Model: 4R1040 T ( I ) Injectors To Be Callibrated And Adjusted. 1.0372 1016 Eqpt: Harbour Diesel Generator B ) Engine Lub Oil Sump To Be Drained And System To Be Flushed. Fresh Lub Oil To Be Charged Into Sump. ( Oil To Be Supplied By Firm ) 1.0373 1016 Eqpt: Harbour Diesel Generator C ) Lub Oil Filter Catridges To Be Replaced. 1.0374 1016 Eqpt: Harbour Diesel Generator D ) Engine Coolant Circuit To Be Flush Through And Coolant To Be Changed. ( Coolant To Be Supplied By Firm ) 1.0375 1016 Eqpt: Harbour Diesel Generator E ) Change Centrifuge Filter And Replace It With Sealing Kit. 1.0376 1016 Eqpt: Harbour Diesel Generator H ) Replace Fuel Oil Filter Catridges 1.0377 1016 Eqpt: Harbour Diesel Generator I ) Main Element Of Dry Type Air Cleaner , Rubber Hose And Clip Of Dry Type Air Cleaner To Be Replaced. ( Filters To Be Provided By Firm, Qty-10 ) 1.0378 1016 Eqpt: Harbour Diesel Generator K ) Change Joint Of Rocker Cover 1.0379 1016 Eqpt: Harbour Diesel Generator L ) Rubber Hoses And Clip 1.038 1016 Eqpt: Harbour Diesel Generator M ) Carry Out Perfomance Trial Post Work Completion. Note:-Above Repairs / Routines To Be Undertaken By Oem / Authorised Firms Of Oem 1.0381 1017 Eqpt : Valves Following Valves To Be Overhauled, Repaired And Pressure Tested. Up To 1.5 Times Working Pressure. Job Includes Renewal Of 10% Ber Valves If Any. 1.0382 1017 Eqpt : Valves Sea Water Line Valves: A ) Gate Valve Dia 200Mm, Main Sea Chest Line 1.0383 1017 Eqpt : Valves B ) Sdnr Valve Dia 100Mm, Main Sea Chest Line To Stbd M / E 1.0384 1017 Eqpt : Valves C ) Angle Valve Dia 100Mm, Stbd M / E To Obd Valve 1.0385 1017 Eqpt : Valves D ) Sdnr Valve Dia 100Mm, Main Sea Chest Line To Port M / E 1.0386 1017 Eqpt : Valves E ) Angle Valve Dia 100Mm, Port M / E To Obd Valve 1.0387 1017 Eqpt : Valves F ) Sdnr Valve Dia 50Mm, Main Sea Chest To Stbd Dg 1.0388 1017 Eqpt : Valves G ) Sdnr Valve Dia 50Mm, Stbd Dg To Obd Line 1.0389 1017 Eqpt : Valves H ) Angle Valve Dia 50Mm, Stbd Dg To Obd Line 1.039 1017 Eqpt : Valves J ) Sdnr V / V Dia 50Mm, Port Dg To Obd Line 1.0391 1017 Eqpt : Valves K ) Sdnr V / V Dia 65Mm, Main Sea Chest To Fire / Bilge Pump Manifold 1.0392 1017 Eqpt : Valves M ) Sdnr V / V Dia 65Mm, Bilge Suction To Manifold 1.0393 1017 Eqpt : Valves N ) Sdnr V / V Dia 50Mm, Ele Store / Endd Store Suction To Manifold 1.0394 1017 Eqpt : Valves P ) Angle V / V Dia 65Mm, Engg Room Bilge Suction To Manifold 1.0395 1017 Eqpt : Valves Q ) Sdnr V / V Dia 50Mm, Bilge Pump Suction Manifold To Fwd And Ballast Tank 1.0396 1017 Eqpt : Valves R ) Sdnr V / V Dia 65Mm, Bilge / Fire Discharge Line 1.0397 1017 Eqpt : Valves S ) Angle V / V Dia 65Mm, Fire / Bilge Diacharge To Obd 1.0398 1017 Eqpt : Valves T ) Fire Hydrant V / V Dia 65Mm , Fire Pump Discharge To Fire Lines 1.0399 1017 Eqpt : Valves U ) Globe V / V Dia 50Mm, Emergency Line To Stbd Dg 1.04 1017 Eqpt : Valves V ) Pressure Releif V / V Dia 50Mm, Emergency Line To Stbd Dg 1.0401 1017 Eqpt : Valves W ) Glove V / V Dia 50Mm, Stp Suction Manifold 1.0402 1017 Eqpt : Valves X ) Sdnr V / V Dia 65Mm, Emergency Line To Voith Cooling Line 1.0403 1017 Eqpt : Valves Y ) Pressure Releif V / V Dia 65Mm, Emergency Line To Voith Cooler Line 1.0404 1017 Eqpt : Valves Z ) Sdnr V / V Dia 65Mm, Main Sea Chest To Gs Pump Suction Manifold 1.0405 1017 Eqpt : Valves Aa ) Sdnr V / V Dia 65Mm, Gs Pump Discharge Line 1.0406 1017 Eqpt : Valves Ab ) Gate V / V Dia 100Mm, Main Sea Chest To Voith Cooling Pump Suction 1.0407 1017 Eqpt : Valves Ac ) Sdnr V / V Dia 100Mm, Voith Cooling Pump To Discharge Line 1.0408 1017 Eqpt : Valves Ad ) Sdnr V / V Dia 40Mm, Voith Cooling Line 1.0409 1017 Eqpt : Valves Ae ) Angle Valve Dia 65Mm, Voith Cooling Line To Obd 1.041 1017 Eqpt : Valves Af ) Sdnr V / V Dia 40Mm, Voith Cooling To Obd 1.0411 1017 Eqpt : Valves Ag ) Screw Down V / V Dia 20Mm, Voith Cooling Pump Discharge To Fifi Gear Box Oil Cooler 1.0412 1017 Eqpt : Valves Ah ) Sdnr V / V Dia 20Mm, Fifi Gear Box Oil Cooler To Obd 1.0413 1017 ( A ) Eqpt : Valves Fifi System Line Valves A ) Sd V / V Dia 60Mm, Sprinklers To Fire Line Dummy 1.0414 1017 ( A ) Eqpt : Valves B ) Fire Line Sprinklers Dia 20Mm 1.0415 1017 ( A ) Eqpt : Valves C ) Sd V / V Dia 100Mm, Fifi Pump Discharge To Sprinklers Line 1.0416 1017 ( A ) Eqpt : Valves D ) Gate V / V Dia 50Mm, Fifi Pump Discharge From Foam Tank 1.0417 1017 ( A ) Eqpt : Valves E ) Gate V / V Dia 50Mm, Fifi Pump Discharge To Bypass Line 1.0418 1017 ( A ) Eqpt : Valves F ) Angle V / V Dia 50Mm, Fifi Pump Discharge To Obd 1.0419 1017 ( A ) Eqpt : Valves G ) Pressure Relief V / V Dia 50Mm, Fifi Pump Discharge Line 1.042 1017 ( B ) Eqpt : Valves Fresh Water System Valves A ) Sd V / V Dia 40Mm, Lt Line Expansion Tank Outlet V / V 1.0421 1017 ( B ) Eqpt : Valves B ) Sd V / V Dia 20Mm, Lt Line To Both M / Es 1.0422 1017 ( B ) Eqpt : Valves C ) Sd V / V Dia 25Mm, Fw Storage Tank To Fw Pump Suction 1.0423 1017 ( B ) Eqpt : Valves D ) Ball V / V Dia 25Mm, Fw Pump Suction Line 1.0424 1017 ( B ) Eqpt : Valves E ) Sd V / V Dia 25Mm, Fw Discharge To Return Line 1.0425 1017 ( B ) Eqpt : Valves F ) Sd V / V Dia 25Mm, Fw Discharge To Overhead Tank 1.0426 1017 ( B ) Eqpt : Valves G ) Ball V / V Dia 30Mm, Overhead Tank To Galley And Wash Rooms 1.0427 1017 ( B ) Eqpt : Valves H ) Sd V / V Dia 30Mm, Overhead Tank To Wash Rooms 1.0428 1017 ( B ) Eqpt : Valves J ) Sd V / V Dia 65Mm, Fw Filling Line 1.0429 1017 ( B ) Eqpt : Valves K ) Ball V / V Dia 20Mm, Fw Discharge To Both M / Es 1.043 1017 ( C ) Eqpt : Valves Fuel System Line Valve: A ) Gate V / V Dia 50Mm, Fo Filling Line Port / Stbd 1.0431 1017 ( C ) Eqpt : Valves B ) Angle V / V Dia 40Mm, Fo Storage Tank To Fuel Pump Suction Line 1.0432 1017 ( C ) Eqpt : Valves C ) Quick Shutoff V / V Dia 50Mm, Fo Storage Tank To Fuel Pump Suction Line 1.0433 1017 ( C ) Eqpt : Valves D ) Sd V / V Dia 40Mm, Fo Storage Tank To Fuel Pump Suction Line 1.0434 1017 ( C ) Eqpt : Valves E ) Sd V / V Dia 40Mm, Fuel Line Bypass 1.0435 1017 ( C ) Eqpt : Valves F ) Sd V / V Dia 32Mm, Fuel Pump Discharge To Both Ru Tanks 1.0436 1017 ( C ) Eqpt : Valves G ) Sd V / V Dia 25Mm, Fuel Pump Suction To Hand Pump 1.0437 1017 ( C ) Eqpt : Valves H ) Sd V / V Dia 25Mm, Fuel Storage Tank To Fuel Oil Purifier 1.0438 1017 ( C ) Eqpt : Valves J ) Sd V / V Dia 20Mm, Fo Purifier To Ru Tank Port & Stbd 1.0439 1017 ( C ) Eqpt : Valves K ) Quick Shut Off V / V Dia 40Mm, Ru Tank To Port / Stbd M / Es 1.044 1017 ( C ) Eqpt : Valves M ) Sd V / V Dia 25Mm, Ru Tank To Port / Stbd M / Es 1.0441 1017 ( C ) Eqpt : Valves N ) Sd V / V Dia 15Mm, M / Es Port & Stbd Return Line To Cooler 1.0442 1017 ( C ) Eqpt : Valves P ) Sd V / V Dia 20Mm, Fuel Return Line Cooler To Ru Tank 1.0443 1017 ( C ) Eqpt : Valves Q ) Quick Shutoff V / V Dia 32Mm, Fuel Ru Tank To Port / Stbd / Harbour Dgs 1.0444 1017 ( C ) Eqpt : Valves R ) Sd V / V Dia 15Mm, Fuel Inlet For Port / Stbd / Harbour D / Gs 1.0445 1017 ( C ) Eqpt : Valves S ) Sd V / V Dia 20Mm, Fo Return Line Of Dgs To Ru Tanks 1.0446 1017 ( C ) Eqpt : Valves T ) Ball V / V Dia 32Mm, Fuel Pump Discharge To Shore Connection 1.0447 1017 ( D ) Eqpt : Valves Air System Line Valves A ) Sdnr V / V Dia 20Mm, Air Compressor Discharge To Air Reserviors Inlet 1.0448 1017 ( D ) Eqpt : Valves B ) Ball V / V Dia 50Mm, Compressor To Air Reserviors Inlet 1.0449 1017 ( D ) Eqpt : Valves C ) Sd V / V Dia 20Mm, Air Reservior Outlet To Manifold Line 1.045 1017 ( D ) Eqpt : Valves D ) Reducers Dia 20Mm, Manifold System 1.0451 1017 ( D ) Eqpt : Valves E ) Sdnr V / V Dia 20Mm, . Manifold System 1.0452 1017 ( D ) Eqpt : Valves F ) Sd V / V Dia 15Mm, Manifold 1.0453 1017 ( D ) Eqpt : Valves G ) Sd V / V Dia 20Mm, Air Line Manifold To Sea Chest Blow Through Line 1.0454 1017 ( D ) Eqpt : Valves H ) Sd V / V Dia 20Mm, Air Line Manifold To Purifiers / Ows 1.0455 1017 ( D ) Eqpt : Valves J ) Sd V / V Dia 20Mm, Air Line Manifold To Fifi Pneumatic V / V 1.0456 1017 ( D ) Eqpt : Valves K ) Sd V / V Dia 15Mm, Air Line Manifold To Air Horn 1.0457 1017 ( D ) Eqpt : Valves M ) Ball V / V Dia 50Mm, Air Reservior Outlet To M / E Starting Air Regulators 1.0458 1017 ( D ) Eqpt : Valves N ) Sdnr V / V Dia 40Mm, Air Reservior Outlet To M / E Starting Air Regulators 1.0459 1017 ( D ) Eqpt : Valves P ) Sd V / V Dia 15Mm, Air Line Drain V / V Near M / Es 1.046 1017 ( D ) Eqpt : Valves Q ) Ball V / V Dia 15Mm, Air Reservior Outlet To Service Line 1.0461 1018 Equp / System: Pipe Lines Sea Water Lines A ) Main Sea Chest Line Dia 200Mm 1.0462 1018 Equp / System: Pipe Lines B ) Main Sea Chest Line To Stbd M / E Dia 100Mm 1.0463 1018 Equp / System: Pipe Lines C ) Stbd M / E To Obd Line Dia 100Mm 1.0464 1018 Equp / System: Pipe Lines D ) Main Sea Chest To Port M / E Dia 100Mm 1.0465 1018 Equp / System: Pipe Lines Sea Water Lines E ) Port M / E To Obd Line Dia 100Mm 1.0466 1018 Equp / System: Pipe Lines F ) Main Sea Chest To Stbd Dg Dia 50Mm 1.0467 1018 Equp / System: Pipe Lines Sea Water Lines G ) Stbd D / G To Obd Line Dia 50Mm 1.0468 1018 Equp / System: Pipe Lines H ) Main Sea Chest To Port Dg Dia 50Mm 1.0469 1018 Equp / System: Pipe Lines Sea Water Lines J ) Port Dg To Obd Line Dia 50Mm 1.047 1018 Equp / System: Pipe Lines Sea Water Lines K ) Main Sea Chest Fo Fire / Bilge Suction Manifold Dia 100Mm 1.0471 1018 Equp / System: Pipe Lines M ) Manifold To Fire / Bilge Suction Dia 65Mm 1.0472 1018 Equp / System: Pipe Lines N ) Bilge Suction Ele Store / Engg Store To Fire Bilge Suction Manifold Dia 65Mm 1.0473 1018 Equp / System: Pipe Lines P ) Engg Room Bilge Paints To Bilge Pump Suction Manifold Dia 65Mm 1.0474 1018 Equp / System: Pipe Lines Q ) Fwd Ballast & Fwd Cofferdam To Bilge Dia 65Mm 1.0475 1018 Equp / System: Pipe Lines R ) Fire / Bilge Discharge To Ballast Tank Fwd Dia 65Mm 1.0476 1018 Equp / System: Pipe Lines S ) Fire / Bilge Pump Discharge To Obd Dia 65Mm 1.0477 1018 Equp / System: Pipe Lines T ) Fire / Bilge Pump Discharge To Fire Hydrants Lines 1.0478 1018 Equp / System: Pipe Lines U ) Emergency Line To Stbd Dg Dia 50Mm 1.0479 1018 Equp / System: Pipe Lines V ) Stp Suction Manifold Line Dia 50Mm 1.048 1018 Equp / System: Pipe Lines W ) Emergency Line To Voith Cooling Line Dia 65Mm 1.0481 1018 Equp / System: Pipe Lines X ) Main Sea Chest Line To Gs Pump Suction Line Manifold Dia 65Mm 1.0482 1018 Equp / System: Pipe Lines Y ) Gs Pump Discharge To Dischrage Common Line Dia 65Mm 1.0483 1018 Equp / System: Pipe Lines Z ) Main Sea Chest Line To Voith Cooling Pumps Suction Line Dia 100Mm 1.0484 1018 Equp / System: Pipe Lines Aa ) Voith Cooling Pump Discharge To Voith Lube Oil Coolers Line Dia 80Mm 1.0485 1018 Equp / System: Pipe Lines Ab ) Voith Cooling Line To Cooler Dia 40Mm 1.0486 1018 Equp / System: Pipe Lines Ac ) Voith Cooling Line To Obd Line Port / Stbd Dia 65Mm 1.0487 1018 Equp / System: Pipe Lines Ad ) Voith Cooling Pump Discharge Line To Fifi Gear Box Oil Cooler Line Dia 20Mm 1.0488 1018 Equp / System: Pipe Lines Ae ) Fifi Gear Box Oil Cooler To Voith Obd Line Dia 20Mm 1.0489 1018 ( A ) Equp / System: Pipe Lines Fifi System Lines A ) Main Sea Chest Line To Stbd Fifi Suction Line Dia 300Mm 1.049 1018 ( A ) Equp / System: Pipe Lines B ) Stbd Fifi Discharge Line To Fire Monitor Line Dia 200Mm 1.0491 1018 ( A ) Equp / System: Pipe Lines C ) Stbd Fifi Discharge Line To Sprinklers Line Dia 100Mm 1.0492 1018 ( A ) Equp / System: Pipe Lines D ) Sprinklers Line To Fire Line Dummy Dia 60Mm 1.0493 1018 ( A ) Equp / System: Pipe Lines E ) Fire Line To Bridge Sprinklers Line Dia 40Mm 1.0494 1018 ( A ) Equp / System: Pipe Lines F ) Pump Discharge To Prv Line Dia 40Mm 1.0495 1018 ( A ) Equp / System: Pipe Lines G ) Fifi Discharge Line From Foam Tank Dia 50Mm 1.0496 1018 ( A ) Equp / System: Pipe Lines H ) Fifi Discharge To Middle Deck Fire Manifold Dia 150Mm 1.0497 1018 ( A ) Equp / System: Pipe Lines K ) Fifi Discharge Line To Manifold Dia 100Mm 1.0498 1018 ( A ) Equp / System: Pipe Lines M ) Fifi Discharge Line To Obd Line Dia 50Mm 1.0499 1018 ( B ) Equp / System: Pipe Lines Fresh Water System Lines: A ) Lt Line Expansion Tank To Port / Stbd M / Es Dia 40Mm 1.05 1025 Equp / System: Pipe Lines B ) Lt Line To Both M / Es Dia 150Mm 1.0501 1018 ( B ) Equp / System: Pipe Lines C ) Fw Storage Tank To Fw Pumps Suction Line Dia 25Mm 1.0502 1018 ( B ) Equp / System: Pipe Lines D ) Fw Pump Discharge To Return Line Dia 25Mm 1.0503 1018 ( B ) Equp / System: Pipe Lines E ) Fw Pumps Dischrge To Fw Ru Tank And Service Lines Dia 25Mm 1.0504 1018 ( B ) Equp / System: Pipe Lines F ) Fw Pumps Discharge Line Fuel Purifier And Ows Dia 150Mm 1.0505 1018 ( B ) Equp / System: Pipe Lines G ) Ru Tank To Galley & Wash Rooms Dia 30Mm 1.0506 1018 ( B ) Equp / System: Pipe Lines H ) Fw Filling Line Dia 65Mm 1.0507 1018 ( B ) Equp / System: Pipe Lines K ) Fw Pump Discharge To Both M / Es Dia 20Mm 1.0508 1018 ( C ) Equp / System: Pipe Lines Fuel System Lines : A ) Fo Filling Line To Storage Tank Port / Stbd Dia 65Mm 1.0509 1018 ( C ) Equp / System: Pipe Lines B ) Fo Storage Tank To Fuel Pump Suction Dia 40Mm 1.051 1018 ( C ) Equp / System: Pipe Lines C ) Fuel Pump Discharge To Ru Tanks Port / Stbd Dia 32Mm 1.0511 1018 ( C ) Equp / System: Pipe Lines D ) Fuel Pump Suction To Hand Pump Dia 25Mm 1.0512 1018 ( C ) Equp / System: Pipe Lines E ) Fo Storage Tank To Fuel Oil Purifier Dia 25Mm 1.0513 1018 ( C ) Equp / System: Pipe Lines F ) Fo Purifier To Ru Tanks Port / Stbd Dia 20Mm 1.0514 1018 ( C ) Equp / System: Pipe Lines G ) Ru Tank To Port / Stbd M / Es Inlet Dia 40Mm 1.0515 1018 ( C ) Equp / System: Pipe Lines H ) Ru Tank To Port / Stbd Main Line To M / Es Dia 25Mm 1.0516 1018 ( C ) Equp / System: Pipe Lines J ) M / Es Port / Stbd Return Line To Cooler Dia 25Mm 1.0517 1018 ( C ) Equp / System: Pipe Lines K ) Fuel Return Line Cooler To Ru Tanks Dia 20Mm 1.0518 1018 ( C ) Equp / System: Pipe Lines M ) Fuel Ru Tank To Port / Stbd / Harbour Dgs Inlet Dia 32Mm 1.0519 1018 ( C ) Equp / System: Pipe Lines N ) Fuel Inlet For Port / Stbd / Harbour Dgs Dia 15Mm 1.052 1018 ( C ) Equp / System: Pipe Lines P ) Fuel Return Line From Dgs To Ru Tank Dia 20Mm 1.0521 1018 ( C ) Equp / System: Pipe Lines Q ) Fuel Pump Discharge Line To Shore Connection Dia 32Mm 1.0522 1018 ( D ) Equp / System: Pipe Lines Air System Lines : A ) Air Compressors Discharge To Air Reserviors Inlet Dia 20Mm 1.0523 1018 ( D ) Equp / System: Pipe Lines B ) Air Compressors Discharge Common Line To Air Reservior Inlet Line Dia 50Mm 1.0524 1018 ( D ) Equp / System: Pipe Lines C ) Air Reservior Outlet To Manifold Dia 50Mm 1.0525 1018 ( D ) Equp / System: Pipe Lines D ) Air Line Manifold To Sea Chest Blow Through Line Dia 20Mm 1.0526 1018 ( D ) Equp / System: Pipe Lines E ) Air Line Manifold To Purifiers / Ows Dia 20Mm 1.0527 1018 ( D ) Equp / System: Pipe Lines F ) Air Line Manifold To Fifi Pneumatic Valves Dia 20Mm 1.0528 1018 ( D ) Equp / System: Pipe Lines G ) Air Line Manifold To Air Horn Dia 15Mm 1.0529 1018 ( D ) Equp / System: Pipe Lines H ) Air Reservior Outlet To Port / Stbd M / Es Air Regualtors Dia 50Mm 1.053 1018 ( D ) Equp / System: Pipe Lines J ) Air Reservior Outlet To Service Line Dia 20Mm 1.0531 1019 Eqpt: Strainers Following System Strainers To Be Manufactured As Per Sample Material: Brass A ) Main Sea Water Supply Manifold Strainers 1.0532 1019 Eqpt: Strainers B ) Main Engine Cooling Water System Strainers 1.0533 1019 Eqpt: Strainers C ) Main Fire Pump Suction System Strainers 1.0534 1020 Eqpt: Co2 Fire Extinguishing System Make: Zeal Marketing Pvt Ltd, Mumbai - 400104. 1.0535 1020 Eqpt: Co2 Fire Extinguishing System Make: Zeal Marketing Pvt Ltd, Mumbai - 400104. A ) All Co2 Cylinders To Be Weighed. If Weight Falls Below The 10% Of Initial Weight Recharge The Cylinders. Weight Of The Co2 Is 45Kg In Each Cyl. 1.0536 1020 Eqpt: Co2 Fire Extinguishing System B ) All Co2 Discharge Multi Jet Nozzles In E / R To Be Opened, Checked For Chockages, Cleaned And Fitted Back. Size 2.5Mm ( Qty-11 Nos ) & 2Mm ( Qty-4 Nos ) 1.0537 1021 Eqpt: Misc A ) Fifi System Gear Box Oil Cooler Inlet Sea Water Line Pressure Measuring Point And Pressure Gauge To Be Provided. ( Range 0-10Bar ) 1.0538 1021 Eqpt: Misc B ) Voith Lube Oil Cooler Sea Water Line Pressure Measuring Point And Pressure Gauges To Be Provided. ( Range 0-10Bar ) 1.0539 1021 Eqpt: Misc C ) Both Main Engines Sea Water Suction Line Pressure Measuring Points And Pressure Gaugesto Be Provided 1.054 1021 Eqpt: Misc D ) Main Engines Complete Body To Be Cleaned. Spray Down The Entire Engine Block With Degreaser. Scrub Down The Deposited Oil, Grease, Rust And Dirt. After Complete Cleaning Apply Suitable Anti Rust Coating To Engine Body. Cautions To Be Taken While Cleaning Of Engine. Sensors And Controls Not Be Damaged. 1.0541 1021 Eqpt: Misc E ) Da Engines Complete Structure To Be Cleaned. Spray Down The Entire Engine Block With Degreaser. Scrub Down The Deposited Oil, Grease, Rust And Dirt. After Complete Cleaning Apply Suitable Anti Rust Coating To Engine Body.Cautions To Be Taken While Cleaning Of Engine. Sensors And Controls Not Be Damaged. 1.0542 1021 Eqpt: Misc F ) Shafting Of Turbocoupling To Be Cleaned. Spray Down The Entire Shaft ( From Main Engine To Voith System ) With Degreaser. Scrub Down The Deposited Oil, Grease, Rust And Dirt. After Complete Cleaning Apply Suitable Anti Rust Coating To Engine Body. Grease To Be Applied To Shaft For Rust Prevention. 1.0543 1021 Eqpt: Misc G ) Main Engine Exhaust Trunking To Be Cleaned Internally. Compensator To Be Replaced With New. 1.0544 1021 Eqpt: Misc H ) Da Exhaust Trunking To Be Cleaned Internally. Compensator To Be Replaced With New. 1.0545 1021 Eqpt: Misc J ) Da Exhaust Lagging To Be Renewed 1.0546 1021 Eqpt: Misc K ) Main Engine Exhaust Lagging To Be Renewed 1.0547 1021 Eqpt: Misc M ) Rack At Spare Store Room Perished , To Be Fabricated In Spare / Store Room. Size ( 6*4 Feet ) 1.0548 1021 Eqpt: Misc N ) Strainers To Be Fabricated As Per Sample, Mat : Brass 1.0549 1021 Eqpt: Misc Q ) Zinc Plug Fitting / Connection Along With Adapter On Main Engine ( Main Engine, Make: Caterpillar, Model:3512C ) Cooling Pipe System To Be Replaced. 1.055 1021 Eqpt: Misc R ) .Zinc Plugs For Main Engine Along With Adapters ( Main Engine, Make: Caterpillar, Model:3512C ) ) To Be Replaced. Location Of Zinc Plug Is Elbow Of The Auxilary Water Pump And Elbow Of The After Cooler. ( Zinc Plugs Be Provided By Firm ) 1.0551 Electrical Work Package Important Note:- Following Points Are Applicable For All Relevant Dls And Shipyards / Firms To Consider And Quote Accordingly. ( A ) Renewal Of Items / Spares:- ( I ) Renewal Of Items / Spares Wherever Mentioned In The Qdl To Be Undertaken By Shipyard / Firm As Per The Sample / Drawing / Details Provided By Ss / Coa / Rmt. ( Ii ) Shipyard / Firm Should Undertake The Routines / Overhaul Of The Equipment Including The Mandatory Spares Required For Undertaking The Same, Irrespective Of The Spares Mentioned In The Mandatory Spares List Provided By Nd ( V ) . ( Iii ) Further, The Cost Should Include The Degutting Of Existing Item, Supply Of New Item, Fitment And Proving Of The System Post Renewal. 1.0552 The Definition Of Overhaul Of Motors / Alternators Includes The Following:- ( A ) Dismantle The Motor. The Motors / Alternators Has To Be Dismantled And Landed By Firm For Overhauling. ( B ) Undertake Trueness Checks Of Rotors / Alternators On The Lathe. Repair Observed Defects ( C ) Check For Ovality In Bearing Housing. Repair Observed Defects. ( D ) Clean The Rotor And Stator Thoroughly With Alcohol, Air, Varnish And Bake. There Should Be No Dust Particles Or Other Foreign Particles Observed After Cleaning ( E ) Measure The Insulation Of Windings Of Rotor And Stator. In Case Insulation Is Below One Mega Ohm Rewind The Rotor / Stator ( F ) Replace Heater And Thermistor Units. ( G ) Assemble The Motor With New Bearings ( H ) In Case Of Repairs To Shaft Trueness Or Replaced Of Winding, Undertake Dynamic Balancing Of The Rotor ( J ) Check And Rectify Phase Imbalance In Insulation Of Windings ( K ) Undertake Test Bed Trials And Confirm No Load Starting And Running Currents, Speed, Spm Readings Apart From Other Standard Checks. Spm Reading Are To Be In Green Zone Post Overhaul. ( L ) All Motors / Alternators And Machinery Body / Cabinets To Be Painted As Per The Original Colour. ( M ) Brass Marking Talleys To Be Provided For All Equipment ( 8X2 Cms ) . ( N ) Wiring / Cabling Which Are Removed During Gutting / Degutting To Be Re Wired Whereever Applicable. ( P ) All Motors / Alternators With Monoblock Pumps Are To Be Proved In Situ. ( Q ) All Terminal Boxes Rubber Beading To Be Replaced To Achieve Water Tight Integrity. 1.0553 Following As Fitted Drawings Need To Be Prepared And Handed Over To Ships Staff ( A ) Foundations Of New Equipment ( B ) Electrical Cabling ( C ) All As And As Including Internals Of Control Panel ( Hull, Engineering & Electrical ) . ( D ) Aber Replacement ( Hull, Engineering & Electrical ) . 1.0554 2001 Equp / System: Main Switch Board , Oem: Marine Electrical , Mumbai 1.0555 2001 Equp / System: Main Switch Board 01 No Switch Board With Common Bus Bar System With Four Incoming Feeders From Two Das.One Harbour Dg & Shore Supply And These Four Are Electrically Interlocked & Connected To The Two Bus Bars Which Is Connected By Bus Coupler In Swbd. Make Marine Electrical , Mumbai 1.0556 2001 Main Switch Board , Oem: Marine Electrical , Mumbai ( A ) De-Energise Switchboard. Clean And Decarbonise The All Busbars, Insulators, Cts, Pts, Junction Boxes, Switch Contact Surfaces, Fuse Bases / Carriers And Other Components. Using Soft Brush / Calico Cloth Dipped In Alcohol. 1.0557 2001 Equp / System: Main Switch Board ( B ) Calibration Of Digital Protection Display Unit Symap-Y Make: Stucke Electrical 1.0558 2001 Main Switch Board , Oem: Marine Electrical , Mumbai ( C ) Renewal Of Digital Protection Display Unit Symap-Y To Be Carried Out 1.0559 2001 Main Switch Board , Oem: Marine Electrical , Mumbai ( D ) Calibration Of Meters Fitted In Msb To Be Carried Out. Callibration Certificates To Be Rendered. 1.056 2001 Main Switch Board , Oem: Marine Electrical , Mumbai ( E ) Digital Kw Meters To Be Renewed 0 To 200Kw 1.0561 2001 Main Switch Board , Oem: Marine Electrical , Mumbai ( F ) Led Bulbs 230V, 20W Pin Type ( Bc Type ) To Be Renewed 1.0562 2001 Equp / System: Main Switch Board ( H ) Replacement Of Indication Lamps To Be Carried Out 1.0563 2001 Equp / System: Main Switch Board ( J ) Replacement Of Voltmeters To Be Carried Out 1.0564 2001 Equp / System: Main Switch Board ( K ) Replacement Of Ampere Meters To Be Carried Out 1.0565 2001 Equp / System: Main Switch Board ( M ) Repalcement The Panel Door Locks Along With Keys To Be Carried Out. 1.0566 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) 1.0567 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( A ) Carry Out Overhauling Of Da Control Panel Along With Calibration Of All Sensors Fitted To Das, Gauges, Converting Modules, Check Circuit Functionality. Renewal Of Indication Lamps To Be Carried Out. Equipments Callibration Reports To Be Rendered. 1.0568 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( B ) Replacement Of Lube Oil Pressure Sensor To Be Carried Out 1.0569 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( C ) Replacement Of Fresh Water / Coolant Temperature Sensors To Be Carried Out 1.057 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( D ) Replacement Of Lube Oil Temperature Sensors To Be Carried Out 1.0571 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( E ) Replacement Of Coolant Level Sensor To Be Carried Out 1.0572 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( F ) Replacement Of Engine Speed / Rpm Sensor To Be Carried Out 1.0573 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( G ) Replacement Of Sea Water Pressure Sensor To Be Carried Out 1.0574 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( H ) Replacement Of Exaust Gas Temperature Sensor To Be Carried Out 1.0575 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( J ) Replacement Of Engine Speed / Rpm Meter 0-2000Rpm To Be Carried Out 1.0576 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( K ) Safety Device Checks For Dg Sets To Be Proved For Satisfactory Performance. 1.0577 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( L ) Renew The Magnetic Switches 24V Dc For Self Starter Circuit 1.0578 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( M ) Overhauling Of The Self Starters 24V Dc To Be Carried Out 1.0579 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Da Starting Control Pannel ( P ) Clean & Tighten The All Connections With Proper Lugs, Ferrules & Connectors 1.058 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( Q ) Renew The Speed Control Unit For Esd5200 Series 1.0581 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( R ) Renew The Generator Engine Protection Display Unit 1.0582 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( S ) Renew The Self Starters 24V Dc For Da 1.0583 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( T ) Renew The Dynamos 24V Dc For Da 1.0584 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( U ) Renew The Self Starters 12V Dc For Koel Engine 1.0585 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) Starting Control Pannel ( V ) Renew The Dynamos 12V Dc For Koel Engine 1.0586 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( W ) Overhauling Of The Dynamo 24V Dc To Be Carried Out 1.0587 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( X ) Overhauling Of The Self Starters 24V Dc For Da To Be Carried Out 1.0588 2002 Eqpt / System:Dg Engine ( Make:Koel;Model:6R1080t ) ( Y ) Overhauling Of The Self Starters 12V Dc For Da To Be Carried Out 1.0589 2003 Eqpt / System: Generators / Alternator Make:Stamford, 415V, 3Ph, 50Hz, 1500Rpm, Qty- 02 Nos ( 100Kva ) And 01 No ( 50 Kva ) 1.059 2003 Eqpt / System: Generators / Alternator Make:Stamford, 415V, 3Ph, 50Hz, 1500Rpm, Total Qty-03 Nos Qty- 02 Nos ( 100Kva ) And 01 No ( 50 Kva ) ( A ) Carryout Overhauling Of Alternator. Job Includes Load Trails And Synchronisation. During Overhauling Observations / Defects Observed To Be Liquidated And Trials To Be Conducted. ( With Full Load ) Post Completion Of The Routines / Overhaul, The Machinery Should Be Proved To Rated / Designed Power / Capacity Without Limitations / Observations And Vibration Levels At All Points Should Be Less Than 5 Mm / Sec. The Equipment Performance Will Be Considered Satisfactory Only If The Performance Trials Are Cleared By Qc. Spm Readings Of Generator To Be In Green Zone. Overvoltage And Undervoltage Protection To Be Proved. 1.0591 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat 3512C Engines, Starting Control Panel ( Including Local & Remote Panels ) Make:Gmmco ( Qty- 02 Nos ) 1.0592 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( A ) Callibration Of Engine Alarm & Control System To Be Done. All Alarm Sensors, Transmitters And Safety Circuit Of System To Be Checked For Proper Functioning. Indication Lamps Along With Holder ( Qty-10 Nos ) To Be Renewed 1.0593 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( B ) Lub Oil Pressure Sensor To Be Replaced With New. 1.0594 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( B1 ) Lub Oil Temperature Sensor To Be Replaced With New. 1.0595 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( B2 ) Air Pressure Sensor To Be Replaced With New. 1.0596 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( B3 ) Cooling Water Temperature Sensor To Be Replaced With New. 1.0597 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( C ) Sensor Inputs From Main Engine To Hmi Not Available For Various Parameters . Defct To Be Rectified. ( Make : Siemens ) 1.0598 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( D ) Software Loaded In Hmi Panel Of Main Engines In Engine Room Is Not Responding Intermittently. Defect To Be Rectfiied 1.0599 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( E ) Pockets For Main Engine Parameters ( Pressure And Temperature Transmitter ) Damaged. Same To Be Fabricared And Suitable Pockets To Be Provisioned For Main Engine Parameters ( Temperature & Pressure ) , 1.06 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( F ) Main Engine Start / Stop Key Switch To Be Renewed. 1.0601 2004 Eqpt / System:Main Engine ( Make:Caterpillar , Model-Cat3512c Engines, 1194Kw@1600Rpm ) ( G ) Main Engine The Push Butons Assembly ( No And Nc Contact ) To Be Renewed 1.0602 2005 Eqpt / System: Shore Supply Make: Marine Electrical, 100Amps, 415V, 3Ph 1.0603 2005 Eqpt / System: Shore Supply Make: Marine Electrical ( A ) Carryout Compleat Overhaul Of The Shore Supply Pannel And Prove Them For Satisfactory Performance 1.0604 2005 Eqpt / System: Shore Supply Box. ( B ) Renew The Indication Lamps With Holders-3Nos 1.0605 2005 Eqpt / System: Shore Supply Box. ( C ) Provide The Phase Sequence Change Over Switch 2 Way With Off 415V, 4 Pole, 100A.Near The Shore Supply Panel Box & Connect The Switch In Shore Supply Circuit & Made Operational. 1.0606 2005 Eqpt / System: Shore Supply Box. ( D ) Provide The Water Proof ( Ip65 ) Panel With Door Type For Phase Sequence Change Over Switch. 1.0607 2005 Eqpt / System:-Shore Supply Cable Reel Drum Mechanisam 1.0608 2005 Eqpt / System:-Shore Supply Cable Reel Drum Mechanisam ( E ) Carry Out Complete Over Hauling Of The Cable Drum Incuding Slip Ring Mechanisam And Prove For Satisfactory Operation. Renew The Deffictive Parts. 1.0609 2005 Eqpt / System:-Shore Supply Cable Reel Drum Mechanisam ( F ) Renew The Slip Ring Set . 1.061 2005 Eqpt / System:-Shore Supply Cable Reel Drum Mechanisam ( G ) Renew The Bearings. 1.0611 2005 Eqpt / System:-Shore Supply Cable Reel Drum Mechanisam ( H ) Renewal Of Shore Suppply Cable 3X50 Sqmm, Rubber Insulated, Copper Multi Stranded Wire Marine Cable 1.0612 2006 Eqpt / System: Smf Lead Acid Batteries ( Maintance Free ) 1.0613 2006 Eqpt / System: Smf Lead Acid Batteries ( Maintance Free ) ( A ) Renew The Lead Acid Batteies Make:Exide 12V, 200Ah For Dg 1.0614 2006 Eqpt / System: Smf Lead Acid Batteries ( Maintance Free ) ( B ) Renew The Lead Acid Batteies Make:Exide 12V, 200Ah For Main Engine Ups 1.0615 2006 ( C ) Eqpt / System: Smf Lead Acid Batteries ( Maintance Free ) Renew The Lead Acid Batteies Make:Exide 12V, 200Ah For Emergency Load Bank 1.0616 2006 Eqpt / System: Smf Lead Acid Batteries ( Maintance Free ) ( D ) Renew The Lead Acid Batteies Make:Exide 12V, 200Ah For Gmdss 1.0617 2007 Equp / System: Emergency Battery Charger Make :Marine Electrical Input;415V, 3Ph, 50Hz. Out Put 24V, Dc 1.0618 2007 Equp / System:Emergency Battery Charger ( A ) Overhaling Of Battery Charger To Be Done. The Functional Checks For Control Pcb , Diode Set , Transformer To Be Carried Out. Cable Insulation To Be Checked. Battery Charger To Be Proved For Satisfactory Perfromance 1.0619 2007 Equp / System:Emergency Battery Charger ( B ) Renew The Fuse Carrries 1.062 2007 Equp / System:Emergency Battery Charger ( C ) Dcdb 1.0621 2007 Equp / System:Emergency Battery Charger ( D ) Complete Overhauling Dcdb To Be Done Cheking Of Cabling , Mcbs, Contactors 1.0622 2007 Equp / System:Emergency Battery Charger ( E ) Renewal Of Voltmeter To Be Carried Out 1.0623 2007 Equp / System:Emergency Battery Charger ( F ) Renewal Of Ammeter To Be Carried Out 1.0624 2008 Eqpt / Syst:Group Starter Panel Group Starter Panel In Mcr Room. ( It Was Having Two Sections & Each Section Having 8 In Nos Starter Controls Including Remote Copntrol Push Buttens & Group Wise Remote Emergency Buttens ) 1.0625 2008 Eqpt / System:Group Starter Panels ( A ) Renew The Remote Emergency Push Buttons Switches 1.0626 2008 Eqpt / System:Group Starter Panels ( B ) Overhauling Of Group Starter Panel To Be Carried Out & Prove It Satisfactory Performance. ( Calibration Certificates / Test Reports From Nabl Recognised Labs Are To Be Submitted ) 1.0627 2009 Eqpt / System:Control Panels / Starters 1.0628 2009 Control Panels / Starters Carry Out Overhauling / Servicing Routines Of The Following Control Pannels / Starters And Prove For Satisfactory Operation. 1.0629 2009 Control Panels / Starters ( A ) Control Panel For Boat Davit Winch ( Including Push Button Station, Limit Switches ) 3Ph, 415V, 5Hp Make: Geetha Engg Works, 1.063 2009 Control Panels / Starters ( B ) Control Panel For Capston Motor ( Including Remote Operational Push Button Stations ) Make:Emco Dynatro, Single Speed, Run & Reverseble With Break System 1.0631 2009 Control Panels / Starters ( C ) Control Panel For Anchor Wind Loss Motor ( Including Master Controller ) Make:Narahari Eng.Works, Double Speed, Run & Reverseble With Break System 1.0632 2010 Eqpt / System: Navigational Lighting Panels ( Ac & Dc ) Make:Edna 230V For Ac, 24V For Dc 1.0633 2010 Eqpt / System: Navigational Lighting Panels ( Ac & Dc ) ( A ) Overhauling Of Navigational Lighting Panels ( Ac & Dc ) To Be Carried Out. Clean & Tighten The All Connections With Proper Lugs, Ferrules & Connecters Check The Functions Of All Fuse Units, Control Cards, Indication Lamps & Horn. Defective Components To Be Renewed. Led Lamps ( Qty-02 ) To Be Renewed. Post Overhauling Of Nlp Prove For Satisfatory Operation 1.0634 2010 Eqpt / System: Navigational Lighting Panels ( Ac ) ( B ) Renew The Fault Detection Module Cards. ( 230V ) 1.0635 2010 Eqpt / System: Navigational Lighting Panels ( Dc ) ( C ) Renew The Fault Detection Module Cards. ( 24V ) 1.0636 2010 Eqpt / System: Navigational Lighting Panels ( Ac & Dc ) ( D ) Toggle Swiches To Be Renewd ( 6 Amps ) 2 Pole, 2 Way With Off 1.0637 2011 Eqpt:Motors / Blowers 1.0638 2011 Eqpt:Motors / Blowers Carry Out Overhauling Of The Following Motors ( Including Blower Parts For Blowers ) And Prove For Satisfactory Operation. ( Total 22 Nos ) 1.0639 2011 Eqpt:Motors / Blowers ( A ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Sea Water Cooling Pumps For Voith System 415V, 3Ø, 20Hp 1.064 2011 Eqpt:Motors / Blowers ( B ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Domesting Fw Pump Motor 415V, 3Ø, 0.5Hp 1.0641 2011 Eqpt:Motors / Blowers ( C ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Engine Room Supply Blower Motor 415V, 3Ph, 50Hz, 10Hp. 1.0642 2011 Eqpt:Motors / Blowers ( D ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Engine Room Supply Blower Motor ( Voith Side ) 415V, 3Ph, 50Hz, 2Hp. 1.0643 2011 Eqpt:Motors / Blowers ( E ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Fire & Bilge Service Pumps 415V, 3Ø, 12.5Hp 1.0644 2011 Eqpt:Motors / Blowers ( F ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Gs Pump 415V, 12.5Hp, 3Ø 1.0645 2011 Eqpt:Motors / Blowers ( G ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Engine Room Supply / Exaust Blower Motor ( Reversable ) 415V, 3Ø, 50Hz, 10Hp. 1.0646 2011 Eqpt:Motors / Blowers ( H ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Fuel Oil Transfor Pump Motor 415V, 3Ø, 12.5Hp 1.0647 2011 Eqpt:Motors / Blowers ( J ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Galley Supply & Exaust Blowers 415V, 3Ø, 2Hp 1.0648 2011 Eqpt:Motors / Blowers ( K ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Toilet Exaust Blower Motor 415V, 3Ø, 2Hp 1.0649 2011 Eqpt:Motors / Blowers ( M ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Accomodation Supply And Exhaust Blower 415V, 3Ø, 2Hp 1.065 2011 Eqpt:Motors / Blowers ( N ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Co2 Exaust Blower Motor 415V, 3Ø, 2Hp 1.0651 2011 Eqpt:Motors / Blowers ( P ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Anchor Windlass Motor 415V, 3Ø, 7.5Kw 1.0652 2011 Eqpt:Motors / Blowers ( Q ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Capstan Motor 415V, 3Ø, 7.5Kw 1.0653 2011 Eqpt:Motors / Blowers ( R ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Davit Crane Motor 415V, 3Ø, 5Hp 1.0654 2011 Eqpt:Motors / Blowers ( S ) Carry Out Overhauling Of The Motor And Blower Aseembly And Prove For Satisfactory Operation. Air Compressor Motor 415V, 3Ø, 5Hp 1.0655 2012 Eqpt / System: Navigational & Communication Equipments. Carryout Serviceable Routines ( Cleaning And Functional Checks ) And Prove Satisfactory Performances For The Foolowing Equipments 1.0656 2012 Eqpt / System: Navigational & Communication Equipments ( A ) Navigational Marine Radar. Make:Praxis, Serviceability Checks To Be Carried Out, Job Includes Cleaning Of Internal Components , Functional Checks Of Equipment And Replacement Of Cable / Wiring, 1.0657 2012 Eqpt / System: Navigational & Communication Equipments ( B ) Navigational Gps System. Make:Furno Serviceability Checks To Be Carried Out, Job Includes Cleaning Of Internal Components , Functional Checks Of Equipment And Replacement Of Cable / Wiring, 1.0658 2012 Eqpt / System: Navigational & Communication Equipments ( C ) Vhf System. Make:Furno, Serviceability Checks To Be Carried Out, Job Includes Cleaning Of Internal Components , Functional Checks Of Equipment And Replacement Of Cable / Wiring, 1.0659 2012 Eqpt / System: Navigational & Communication Equipments ( D ) Echo Sounder Unit. Make: Koden Serviceability Checks To Be Carried Out, Job Includes Cleaning Of Internal Components , Functional Checks Of Equipment And Replacement Of Cable / Wiring, 1.066 2012 Eqpt / System: Navigational & Communication Equipments ( E ) Sound Power Telephones. Make: Elcom Serviceability Checks To Be Carried Out, Job Includes Cleaning Of Internal Components , Functional Checks Of Equipment And Replacement Of Cable / Wiring. 1.0661 2013 Eqpt / System:Illuminated Name Board-1No ( A ) Renew The Led Tube Lights 230V, 20W.2 Make;Sysca / Philips Inside The Ship Name Board. 1.0662 2014 Eqpt / System: Wall Mounted Electrical Fans ( Oscillating ) Type- 400 Mm Sweep 1.0663 2014 Eqpt / System: Wall Mounted Electrical Fans ( Oscillating ) ( A ) Overhauling Of Fans To Be Carried Out. Fan Power Cables And Operating Swiches To Be Renewed..Post Overhauling Of Fans, Prove For Satisfactory Performance. Fitment Of Fans To Be Done At Suitable Locations 1.0664 2014 Eqpt / System: Wall Mounted Electrical Fans ( Oscillating ) ( B ) Fitment Of New Fans At Suitable Locations. 1.0665 2015 Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 1.0666 2015 Eqpt: Salvage Pump Engine Make: M / S Greaves Cotton, Model- 3G11nag1 ( A ) Renewal Of Ignition Switch With Key. Prove Operation Of Engine Using Ignition Switch Key. 1.0667 2015 Eqpt / System:Emergency Dd Pump ( B ) Replacement Of Lub Oil Pressure Sensor To Be Carried Out. 1.0668 2015 Eqpt / System:Emergency Dd Pump ( C ) Replacement Of Lub Oil Temperature Sensor To Be Carried Out 1.0669 2016 Eqpt / System: Fire Detection & Alarm System Make:Marinelec Technolgies; Model:D109_Manuel_Gb Rev2 1.067 2016 Eqpt / System: Fire Detection & Alarm System Make:Marinelec Technolgies;Model:D109_Manuel_Gb Rev2: ( A ) Callibration Of Fire Detection And Alarm Panel To Be Carried Out. Check Circuitry Functions With Control Voltages. Defective Components To Be Renewed. Battery Inside The Control Panel To Be Renewed ( Qty-02 ) 1.0671 2016 Eqpt / System: Fire Detection & Alaraming System ( B ) Renew The Fire Detection Panel Display System Unit Model:D109_Manuel_Gb Rev2 1.0672 2017 Electrically Operated Windlass Manufacturer:- M / S Hemant Engineering Works, Thane; Stud Link Chain Dia: 24 Mm, Electric Motor ( 415V, 50 Hz ) Output: 10 Hp, Motor Speed : 1500 Rpm 1.0673 2017 Electrically Operated Windlass ( A ) Check / Inspection Rotor Thickness, Air Gap, Release / Voltage. Readjustment Of Air Gap If Required.Renew Sealing / O-Rings & Cable Gland. Renew Terminal Cover Mounting Screws, Manual Release Screw, Enclouser Cover Mounting Screws. 1.0674 2017 Electrically Operated Windlass ( B ) Checking Of Insulation Of Resistance Of Motor & Starter Control Panel. Prove For Satisfactory Operation 1.0675 2017 Electrically Operated Windlass ( C ) Checking Of Motor & Starter Control Panel. Overhauling Of Controllers. 1.0676 2018 Ams Panel Make :Praxis 1.0677 2018 Equp / System: Ams Panel Make :Praxis ( A ) Overhauling Of Ams Panel To Be Carried Out . Prove For Satisfactory Operation 1.0678 2018 Equp / System: Ams Panel Make :Praxis ( B ) Renewal Of Ups Input 220V Ac-240V Ac, 50 / 60Hz, 7.5A, Single Phase, Output:- 220V Ac-240V Ac, Capacity 1000 Va 1.0679 2018 Equp / System: Ams Panel Make :Praxis ( C ) All Connections Between Ams-Db And Ams Panel To Be Checked. Defective Componenets To Be Checked 1.068 2019 Eqpt / System: Scr Control Rectifier Unit 2Kw For M / E Make:Eltek Sgs Pvt Ltd , Model Type:Fp2-2000W; Input 230V Ac, Out Put 24V Dc 1.0681 2019 Eqpt / System: Scr Control Rectifier Unit 2Kw ( A ) Carryout Overhauling Of Scr Cotrol Rectifier Unit To Be Carried Out. 1.0682 2019 Eqpt / System: Scr Control Rectifier Unit 2Kw ( B ) Smps To Be Replaced With New. Fitment Of Smps To Be Carried Out And To Be Proved For Satisfactory Operation 1.0683 2020 Eqpt / System: Light Fittings. Renewal Of Following Navigation Lights 1.0684 2020 Eqpt / System: Light Fittings ( A ) Renew The Ac Navigational Bulbs 230V, 60W 1.0685 2020 Eqpt / System: Light Fittings ( B ) Renew The Dc Navigational Bulbs 24V, 60W 1.0686 2020 Eqpt / System: Light Fittings Watertight 24V, 10W, Bulkhead Emergency Light Fittings ( C ) Renew The Existing Light Fittings With Led Fittings, Spec 10W, 24V, Dc Along With Necessary Accessories And Wiring ( The Bulb To Be Operated 15V Dc To 30V Dc ) ( Wt ( Ip65 ) Surface Type-25Nos, Flash Type 25Nos 1.0687 2020 Eqpt / System: Light Fittings ( D ) Renew Flush Mounting Type Indoor Twin Led Tube Light Lamp Fittings 230V, 2X20w, Led Light Fittings, Make- Sysca / Philips 1.0688 2020 Eqpt / System: Light Fittings ( E ) Renew Industrial Type Watertighttwin Led Tube Light Lamp 230V, 2X20w, Led Light Fittings, Make- Sysca / Philips 1.0689 2020 Eqpt / System: Light Fittings ( F ) Renew Led Flood Light Fitting ( Wt ) In Deck Area. 120W, 230V, Ac; Make Sysca / Philips 1.069 2020 Eqpt / System: Light Fittings ( G ) Renew Led Flood Light Fitting ( Wt ) In E / R 120W, 230V, Ac; Make Sysca / Philips 1.0691 2020 Eqpt / System: Light Fittings ( H ) Renew Wt U Glass Deck Light Fittings Make:Ajmer 1.0692 2020 Eqpt / System: Light Fittings ( J ) Renew Led Lights 9W, 230V Make: Syska / Philips 1.0693 2021 Eqpt / System: External Fire Fighting System Make:Janson 1.0694 2021 Eqpt / System: External Fire Fighting System Make:Janson ( A ) Overhauling Of Fifi Gun Motors And Prove For Satisfatory Operation 1.0695 2022 Eqpt / System: Pa System 1.0696 2022 Eqpt / System: Pa System ( A ) Pa System To Be Checked For Satisfactory Operation. Defective Speakers And Cables To Be Replaced. 1.0697 2022 Eqpt / System: Pa System ( B ) Overhauling Of Amplifier To Be Carried Out 1.0698 2022 Eqpt / System: Pa System ( C ) Overahauling Of Remote Pa System Panel In Ecr Room And Make It Satisfactory Performance 1.0699 2023 Window Wiper 1.07 2023 Window Wiper ( A ) Complete Overhauling Of Window Wiper Control Panel And Make It Satisfactory Performance 1.0701 2023 Window Wiper ( B ) Control Pcb To Be Rapaired ( Presently Not Working ) 1.0702 2023 Window Wiper ( C ) Overhauling Of Window Wiper Motors. 1.0703 2023 Window Wiper ( D ) Renewal Of Wiper Blades With Rubber Combing 1.0704 2025 Eqpt / System: Digital Tank Content Level Indication System Make:Pune Techtrol Pvt Ltd Model:Slt-11Sfw 1.0705 2025 Eqpt / System: Digital Tank Content Level Indication System ( A ) Digital Tank Content Level Indication System Is Malfunctioning. . Callibration Of Sensors To Be Carried Out. Defective Cable To Be Renewed. 1.0706 2025 Eqpt / System: Digital Tank Content Level Indication System ( B ) Renewal Of Digital Tank Content Level Indication System Level Sensor ( Qty-04 ) . 1.0707 2026 Eqpt / System: Cooking Range With 2 Hot Plates With Oven;430V 3Ph 6Kw. Make:M / S Krist Engineering & Mfg Compeny 1.0708 2026 Eqpt / System: Cooking Range With 2 Hot Plates With Oven ( A ) Overahuling Of Cooking Range. Renew Defective Components. Cleaning Of All Equipment. Cleaning & Tightening The All Connections With Proper Lugs, Ferrules & Connecters To Be Done 1.0709 2026 Eqpt / System: Cooking Range With 2 Hot Plates With Oven ( B ) Renew The Heating Elements ( W Type ) 430V, 1500W 1.071 2026 Eqpt / System: Cooking Range With 2 Hot Plates With Oven ( C ) Renew The W / T Iron Clad 3Ph 430V 30A Plug Top Along With Socket. 1.0711 2026 Eqpt / System: Cooking Range With 2 Hot Plates With Oven ( D ) Renew The Internal Wiring With Heat Resistance Multi Stand Flexible Copper Cable 4Sq.Mm 1.0712 2027 Eqpt / System:Hot Water Boiler ( A ) Repair / Overhauling Of Hot Water Boiler 20Ltrs 230V 1.0713 2028 Eqpt / System:Water Cooler ( A ) Servicing Of Water Cooler ( 20Ltrs ) To Be Carried Out. Water Cooler Tro Be Proved For Satisfactory Operation 1.0714 2029 Eqpt / System:Electrical Horn 1.0715 Eqpt / System:Electrical Horn ( A ) Provision The Suitable Ship Electrical Horn For 50Mtrs To 75 Mtrs Length Vessels Along With Control Panel.Sound >130Db, Weather Proof, & Rust Proof Material 1.0716 2030 Eqpt / System:Air Horn Control System. Make:M / S Krist Eng & Mant Corp. Ghaziabad 1.0717 2030 Eqpt / System:Air Horn Controling System ( A ) Air Horn Control System To Be Checked For Satisfactory Performance. Air Strainer To Be Cleaned. Control Power Supply Unit ( 24V Dc ) To Be Checked. Circuit Countinuity To Be Checked. Check Circuit Control Voltage And Function. 1.0718 2030 Eqpt / System:Air Horn Controling System ( B ) Clean & Tighten The All Connections With Proper Lugs, Ferrules & Connecters. Replace Defective Connectors, Lugs & Ferrules 1.0719 2030 Eqpt / System:Air Horn Controling System ( C ) Renew The Air Solenoid Valves Along With Coil 24V Dc 1.072 2030 Eqpt / System:Air Horn Controling System ( D ) Renew The Timer Pcb 1.0721 2031 Equp / System:Transformer, Make: Static Transformer Pvt Ltd 1.0722 2031 Equp / System:Transformer, Make: Static Transformer Pvt Ltd ( A ) Overahualing Of Transformer Unit. Post Overhauling Prove For Satisfactory Performance 1.0723 2032 Eqpt / System:Split A / Cs 1.0724 2032 Eqpt / System: Air Conditioning Unit ( A ) Provisioning Of A / Cs Unit In Accomodation - Qty 03 Nos ( 1.5 Tons ) . Firm To Include Cost Of All Connection, Fitment Of Unit ( Qty-03 ) & Power Supply Etc Required For Installation Of Ac Unit. Ac Unit To Be Proved For Satisfactory Performance 1.0725 2032 Eqpt / System:Split A / Cs ( B ) Servicing Of Split Ac Unit To Be Carried Out.Leak Test To Be Carried Out. Necessary Repair To Be Undertaken.Servicing Includes Full Cleaning Of Outdoor And Indoor Unit. Gas Charging To Be Carried Out. Remote For Operating Ac To Be Provided. Ac Unit To Be Proved For Satisfactory Performance 1.0726 2032 Eqpt / System:Split A / Cs ( C ) If Ac Found Unserviceable, New Ac ( 1.5T ) To Be Provisioned. Firm To Include Cost Of All Coonection & Power Supply Etc Required For Fitment Of Ac Unit. Length Of Piping To Be Considered Up To 10 Rmtr 1.0727 2032 Eqpt / System:Split A / Cs ( D ) Suitable Ac Drain Arrangment To Be Provided. Ac Outdoor Unit Supporting Stand To Be Renewed. Suitable Protection Cover / Box To Be Fabricated For Ac Outdoor Units.. 1.0728 2033 Eqpt: Co2 Fire Extinguishing System Make: Zeal Marketing Pvt Ltd, Mumbai - 400104. 1.0729 2033 Eqpt / System: Co2 Existinguishing System ( A ) Overhaul The Motorised Siren & Flasher 1.073 2033 Eqpt / System: Co2 Existinguishing System ( B ) Check , Calibrate & Test The Set Point Of Heat Detectors-4Nos, Type Nittan, Uk Ns-Dhg1 Set Point 58°C 1.0731 2033 Eqpt / System: Co2 Existinguishing System ( C ) Check , Calibrate & Test The Set Point Of Pressure Operated Switch-1No 1.0732 2033 Eqpt / System: Co2 Existinguishing System ( D ) Renew The Indication Lamps With Holders ( 2.5 Cm Dia Cover ) 1.0733 Mandatory Spares List 3001 Eqpt : Main Engine, Make: Caterpillar, Model:3512C 1.0734 3001 Eqpt : Main Engine ( A ) Cat- Me Cooling System ( Fw Cooler ) Liner P / N:-3271109 1.0735 3001 Eqpt : Main Engine ( B ) Tdi Regulator , Pressure Npt Pipe Threads ( 2 Npt Pipe Thread ) P / N:-2-29394 1.0736 3001 Eqpt : Main Engine ( C ) Cat- Tdi Starter Tdi Overhaul Kit , Tdi P / N:-457 1.0737 3001 Eqpt : Main Engine ( D ) Cat- Tdi Starter Tdi Housing Seal Bearing Tdi P / N:-224114 1.0738 3001 Eqpt : Main Engine ( E ) Cat- Tdi Starter Tdi Nozzle, Valve Rh-13, Tdi P / N:-22509813R 1.0739 3001 Eqpt : Main Engine ( F ) Cat- Tdi Starter Tdi Turbine Rotor, Tdi P / N:-225462 1.074 3001 Eqpt : Main Engine ( G ) Cat- Tdi Starter Tdi Shaft, Turbine Tdi P / N:-224764 1.0741 3001 Eqpt : Main Engine ( H ) Cat- Tdi Starter Tdi Hose Assembly Steel Braid- 9.68, Tdi P / N:-1P23448014 1.0742 3001 Eqpt : Main Engine ( J ) Cat- Tdi Starter Tdi Hose Assembly Steel Braid- 12.25, Tdi P / N:-1P23448015 1.0743 3001 Eqpt : Main Engine ( K ) Cat- Tdi Starter Nye Rheolube 377Al Grease, Tdi P / N:-994121003 1.0744 3001 Eqpt : Main Engine ( L ) Cat- Tdi Starter Spring Compression Tdi P / N:-990435 1.0745 3001 Eqpt : Main Engine ( M ) Cat- Tdi Starter O Ring Tdi P / N:-225106 1.0746 3001 Eqpt : Main Engine ( N ) Cat- Tdi Starter Spool Valve Tdi P / N:-225099 1.0747 3001 Eqpt : Main Engine ( P ) Cat- Tdi Starter Male Below, 90Deg Tdi P / N:-993589001 1.0748 3001 Eqpt : Main Engine ( Q ) Cat- Tdi Starter Elbow, 90Deg Tdi P / N:-993565001 1.0749 3001 Eqpt : Main Engine ( R ) Cat- Tdi Starter Washer Tdi P / N:-225103 1.075 3001 Eqpt : Main Engine ( S ) Cat- Tdi Starter Key-1 / 8 Square X.500Lg Tdi P / N:-990220050 1.0751 3001 Eqpt : Main Engine ( T ) Cat- Tdi Starter Retaining Ring Tdi P / N:-992001027 1.0752 3001 Eqpt : Main Engine ( U ) Cat- Tdi Starter Spring Compression Tdi P / N:-990433 1.0753 3001 Eqpt : Main Engine ( V ) Cat- Tdi Starter Shaft Turbine Tdi P / N:-224764 1.0754 3001 Eqpt : Main Engine ( W ) Cat- Tdi Starter Carrier Assy, Stage 1 Tdi P / N:-Stg125305001 1.0755 3001 Eqpt : Main Engine ( X ) Cat- Tdi Starter Piston Tdi P / N:-224644001 1.0756 3001 Eqpt : Main Engine ( Y ) Cat- Tdi Starter Split Ring Tdi P / N:-223419 1.0757 3001 Eqpt : Main Engine ( Z ) Cat- Tdi Starter Stage 2 Assy Repair Kit-20.1 Tdi P / N:-4514 1.0758 3001 Eqpt : Main Engine ( Aa ) Cat- Tdi Starter Carrier Output Shaft-20.1 Tdi P / N:-2P25207 1.0759 3001 Eqpt : Main Engine ( Ab ) Cat- Tdi Starter Plate Retainer Tdi P / N:-225422 1.076 3001 Eqpt : Main Engine ( Ac ) Cat- Tdi Starter Drive, Pre-Engaged, Rh, 6 / 8P, 11T Tdi P / N:-222954 1.0761 3001 Eqpt : Main Engine ( Ad ) Cat- Tdi Starter Spring, Compression Tdi P / N:-990422 1.0762 3001 Eqpt : Main Engine ( Ae ) Cat- Me Cooling System Oil Cooler P / N:-Fg120-4894-3 1.0763 3001 Eqpt : Main Engine ( Af ) Cat- Me Cooling System ( Fw Cooler ) End Titanium Plates P / N:-327115 1.0764 3001 Eqpt : Main Engine ( Ag ) Cat- Me Cooling System ( Fw Cooler ) Titanium Collars P / N:-3271101 1.0765 3002 Eqpt :Diesel Generator , Make:Koel, Model: 1.0766 3002 Eqpt : Diesel Generator ( A ) Koel- Dg W.P Assy With Del. Volute ( 282.5Crs ) ( Tbk Make ) P / N:-4H.052.20.0.00 1.0767 3002 Eqpt : Diesel Generator ( B ) Koel- Dg Service Kit For Sea Water Pump P / N:-F6.M009.02.0.00 1.0768 3002 Eqpt : Diesel Generator ( C ) Koel- Dg Oil Metering Orifice P / N:-2H.022.06.0.00 1.0769 3002 Eqpt : Diesel Generator ( D ) Koel- Dg Rocker Cover Joint Metallic P / N:-4H.009.12.0.00 1.077 3002 Eqpt : Diesel Generator ( E ) Koel- Dg Rocker Cover Gaskets ( Rcs With Half Bead ) P / N:-6H.013.15.0.00 1.0771 3002 Eqpt : Diesel Generator ( F ) Koel- Dg Banjo Bolt P / N:-03.027.04.0.00 1.0772 3002 Eqpt : Diesel Generator ( G ) Koel- Dg Centrifugal Filter Service Kit P / N:-F6.999.100.0.00 1.0773 3002 Eqpt : Diesel Generator ( J ) Koel- Dg Lub Oil Filter P / N:-Dv0.014.11.0.00 1.0774 3002 Eqpt : Diesel Generator ( K ) Koel- Dg Primary Element P / N:-6H.411.02.0.00 1.0775 3002 Eqpt : Diesel Generator ( L ) Koel- Dg V Belt Roulands ( 1250 ) Make P / N:-4H.1531.01.0.00 1.0776 3002 Eqpt : Diesel Generator ( M ) Koel- Dg V Belt Clogged ( Bx-48 ) P / N:-47.305.01.0.00 1.0777 3002 Eqpt : Diesel Generator ( N ) Koel- Dg Fuel Filter Cartridge Duplex Type P / N:-4H.333.03.0.00 1.0778 3002 Eqpt : Diesel Generator ( P ) Koel- Dg Koel Care Genuine Coolant Premix 26 Lts Can P / N:-82.020.35.1.26 1.0779 3002 Eqpt : Diesel Generator ( Q ) Koel- Dg Fuel Pipe ( Primary To Secondary ) P / N:-F6.353.112.0.00 1.078 3002 Eqpt : Diesel Generator ( R ) Koel- Dg 1 Mtr Long Fuel Hoses Wire Braded P / N:-6H.466.35.0.00 1.0781 3002 Eqpt : Diesel Generator ( S ) Koel- Dg 1 Mtr Long Fuel Hoses Wire Braded P / N:-6H.466.36.0.00 1.0782 3002 Eqpt : Diesel Generator ( T ) Koel- Dg Wire Braided Pipe From Jacketed Leafoff To Fuel Collector P / N:-6H.945.14.0.00 1.0783 3002 Eqpt : Diesel Generator ( U ) Koel- Dg Lub Oil Supply Hose ( Crank Case To Fip ) For Irs P / N:-4H.333.01.0.00 1.0784 3002 Eqpt : Diesel Generator ( V ) Koel- Dg Lub Oil Hose Both Side M26x1.5 Female P / N:-4H.M019.01.0.00 1.0785 3002 Eqpt : Diesel Generator ( W ) Koel- Dg Lub Oil Hose 550 Length Both Side M26 Female P / N:-4H.M019.04.0.00 1.0786 3002 Eqpt : Diesel Generator ( X ) Koel- Dg Adaptor M22x1.5 & M26x1.5 P / N:-4H.M019.02.0.00 1.0787 3002 Eqpt : Diesel Generator ( Y ) Koel- Dg M26x1.5 Male & Female Elbow P / N:-4H.M019.03.0.00 1.0788 3002 Eqpt : Diesel Generator ( Z ) Koel- Dg Copper Washer ( 10X16 ) P / N:-50.508.08.000 1.0789 3002 Eqpt : Diesel Generator ( Aa ) Koel- Dg Leakoff Assy P / N:-6H.1124.30.0.00 1.079 3002 Eqpt : Diesel Generator ( Ab ) Koel- Dg O Ring For Drain Plug P / N:-F6.024.47.0.00 1.0791 3002 Eqpt : Diesel Generator ( Ac ) Koel- Dg Thermostat Bypass Hose P / N:-4H.023.02.0.00 1.0792 3002 Eqpt : Diesel Generator ( Ad ) Koel- Dg Hose Straight 70Mm Length With Central Hump P / N:-4H.366.07.0.00 1.0793 3002 Eqpt : Diesel Generator ( Ae ) Koel- Dg Lo Supply Hose ( Fip ) M10 Banjo Ends X 235 L P / N:-4H.006.01.0.00 1.0794 3002 Eqpt : Diesel Generator ( Af ) Koel- Dg Rubber Hose ( For Tr55 Turbo, Compressor Outlet ) P / N:-4H.168.11.0.00 1.0795 3002 Eqpt : Diesel Generator ( Ag ) Koel- Dg Hose Air Cleaner P / N:-6H.466.47.0.00 1.0796 3002 Eqpt : Diesel Generator ( Ah ) Koel- Dg Hose ( Donaldson P532944-3 Rings - 4 Ply-102X152 260 Deg Cac-Inlet ) P / N:-F6.377.08.0.00 1.0797 3002 Eqpt : Diesel Generator ( Ai ) Koel- Dg Hose For Water Pump Inlet To Rad Outlet P / N:-6H.036.13.0.00 1.0798 3002 Eqpt : Diesel Generator ( Aj ) Koel- Dg Hose ( Radiator To Water Pump Pipe ( 45X45x130l ) P / N:-4H.073.01.0.00 1.0799 3002 Eqpt : Diesel Generator ( Ak ) Koel- Dg Hose ( Pipe To Water Pump ) ( 45X45x80l ) P / N:-4H.073.02.0.00 1.08 3002 Eqpt : Diesel Generator ( Al ) Koel- Dg Hose Make Up Connection P / N:-6H.036.14.0.00 1.0801 3002 Eqpt : Diesel Generator ( Am ) Koel- Dg S S Joint ( 4 ) P / N:-F6.503.02.0.00 1.0802 3002 Eqpt : Diesel Generator ( An ) Koel- Dg Joint For Adaptor ( Turbo Side ) P / N:-4H.132.27.0.00 1.0803 3002 Eqpt : Diesel Generator ( Ao ) Koel- Dg Joint For Adaptor Crank Case Side P / N:-4H.132.31.0.00 1.0804 3002 Eqpt : Diesel Generator ( Ap ) Koel- Dg Joint Ss ( For Turbocharger ) P / N:-6H.029.01.0.00 1.0805 3002 Eqpt : Diesel Generator ( Aq ) Koel- Dg R Rings ( Din 70910-65X2.5 ) P / N:-F6.168.02.0.00 1.0806 3002 Eqpt : Diesel Generator ( Ar ) Koel- Dg S S Joint For Exhaust Manifold P / N:-P2.106.01.0.00 1.0807 3002 Eqpt : Diesel Generator ( As ) Koel- Dg Washer For Inj. ( Bosch No 2439999032 / 2430105020 ) P / N:-10.029.07.0.00 1.0808 3002 Eqpt : Diesel Generator ( At ) Koel- Dg O Ring For Nozzle P / N:-3H.009.11.0.00 1.0809 3002 Eqpt : Diesel Generator ( Au ) Koel- Dg Thermostat Element ( 74 Deg ) - Wtil No Dev 358 P / N:-39.040.09.0.00 1.081 3002 Eqpt : Diesel Generator ( Av ) Koel- Dg Joint For Thermostat Cover ( Metallic ) P / N:-4H.053.08.0.00 1.0811 3002 Eqpt : Diesel Generator ( Aam ) Koel- Dg Float Type Level Sensor Make; Rico Threading: 1 Bsp, ( With Tyko Make Connector ) Suitable For Marine Application P / N:-Dv0.901.26.0.00 1.0812 3002 Eqpt : Diesel Generator ( Aan ) Koel- Dg Battery Exide / U Power Make 7Ah 12V Dc P / N:-Dv2.860.32.0.00 1.0813 3002 Eqpt : Diesel Generator ( Aao ) Koel- Dg Fuel Collector P / N:-F6.353.109.0.00 1.0814 3002 Eqpt : Diesel Generator ( Aap ) Koel- Dg Speed Control Unit Esd 5221 P / N:-F6.614.02.0.00 1.0815 3002 Eqpt : Diesel Generator ( Aaq ) Koel- Dg Exhaust Temperature Sensor With 2Pin Connector, 1 / 4 Connection, Radix Make Type-K P / N:-6H.715.31.0.00 1.0816 3002 Eqpt : Diesel Generator ( Aar ) Koel- Dg Pressure Transmitter ( Danfoss Make, Type-Mbs 3250, Range 0 To 10 Bar, Output 4 To 20Ma ) P / N:-6H.715.27.0.00 1.0817 3002 Eqpt : Diesel Generator ( Aas ) Koel- Dg Lub Oil Pressure Sensor With Switch Three Point Dual Wiper Type, Continental Make ) P / N:-46.252.05.0.00 1.0818 3002 Eqpt : Diesel Generator ( Aat ) Koel- Dg Centrigugal Filter P / N:- F6.024.46.0.00 1.0819 3002 Eqpt : Diesel Generator ( Aau ) Koel- Dg Raw Water Pump & Mtg P / N:-6H.465.8 1.082 3002 Eqpt : Diesel Generator ( Aav ) Koel- Dg Expansion Tank P / N:-6H.466.28.0.00 1.0821 3002 Eqpt : Diesel Generator ( Aaw ) Koel- Dg Sea Water Pump P / N:-F6.064.92.0.00 1.0822 3002 Eqpt : Diesel Generator ( Aax ) Koel- Dg Control Protection Card Symap-G Make Stuckle 1.0823 3002 Eqpt : Diesel Generator ( Aaz ) Koel Dg Worm Drive Hose Clip ( 61Mm ) P / No 50.519.11.0.00 1.0824 3002 Eqpt : Diesel Generator ( Aaaa ) Koel Dg Worm Drive Hose Clip ( 35Mm ) P / No 50.519.07.000 1.0825 3002 Eqpt : Diesel Generator ( Aaac ) Koel Dg Water Pump Belt 3 P / No 4H.465.46.0.00 1.0826 3002 Eqpt : Diesel Generator ( Aaad ) Koel Dg Water Pump Belt 1 P / No 4H.465.21.0.Pr 1.0827 3002 Eqpt : Diesel Generator ( Aaae ) Koel Dg Water Pump Belt 2 P / No 4H.465.45.0.Pr 1.0828 3002 Eqpt : Diesel Generator ( Aaaf ) Koel Dg V Belt ( Xpa 1250 ) Cogged P / No 4H.069.01.0.00 1.0829 3002 Eqpt : Diesel Generator ( Aaag ) Koel Dg Joint ( For Air Inlet / Outlet Cover ) P / No 4H.1494.11.0.00 1.083 3002 Eqpt : Diesel Generator ( Aaah ) Koel Dg Hose ( Thermostat To H.E ) P / No 6H.466.43.0.00 1.0831 3002 Eqpt : Diesel Generator ( Aaai ) Koel Dg Joint For Heat Exchanger ( Marine ) P / No 4H.465.38.0.00 1.0832 3002 Eqpt : Diesel Generator ( Aaaj ) Koel Dg Hose T Bolt Clamp ( Dia 55-65 ) P / No 4H.1712.24.0.00 1.0833 3002 Eqpt : Diesel Generator ( Aaak ) Koel Dg Hose ( Pipe From H.E To Engine Coolant Side ) P / No 6H.466.44.0.00 1.0834 3002 Eqpt : Diesel Generator ( Aaal ) Koel Dg Worm Drive Hose Clip ( 48 Mm ) P / No 50.519.09.0.00 1.0835 3002 Eqpt : Diesel Generator ( Aaam ) Koel Dg Copper Washer ( 14X20 ) P / No 50.508.12.000 1.0836 3002 Eqpt : Diesel Generator ( Aaan ) Koel Dg Banjo Bolt - M14x1.5 P / No 50.504.04.000 1.0837 3002 Eqpt : Diesel Generator ( Aaao ) Koel Dg Fuel Pipe ( Primary To Secondary ) P / No F6.353.112.0.00 1.0838 3002 Eqpt : Diesel Generator ( Aaap ) Koel Dg Wire Braided Pipe ( From Jacketed Hp Leak Off To Fuel Collector ) P / No 4H.333.42.0.Pr 1.0839 3002 Eqpt : Diesel Generator ( Aaaq ) Koel Dg Injector Assy ( V.S Turbo Chraged Engine ) P / No 4H.154.10.0.00 1.084 3002 Eqpt : Diesel Generator ( Aaar ) Koel Dg Bush For Injector P / No 02.035.08.0.00 1.0841 3003 Eqpt :Voith Propulsion , Make:Voith Turbo Schneider Propulsion, Model:Vsp 21R5 / 150-2 1.0842 3003 Eqpt :Voith Propulsion ( A ) Vsp 21R5 / 150-2 Fusible Plug P / N:-Tcr11977700 1.0843 3003 Eqpt :Voith Propulsion ( B ) Vsp 21R5 / 150-2 Mts Switch Element P / N:-Tcr12390160 1.0844 3003 Eqpt :Voith Propulsion ( C ) Vsp 21R5 / 150-2 Switch P / N:-Tcr11960720 1.0845 3003 Eqpt :Voith Propulsion ( D ) Vsp 21R5 / 150-2 Resist. Thermometer P / N:-Tcr10685300 1.0846 3003 Eqpt :Voith Propulsion ( E ) Vsp 21R5 / 150-2 Gland Ring P / N:-1822179691000 1.0847 3003 Eqpt :Voith Propulsion ( F ) Vsp 21R5 / 150-2 O-Ring P / N:-H01004361 1.0848 3003 Eqpt :Voith Propulsion ( G ) Vsp 21R5 / 150-2 O-Ring P / N:-H01062750 1.0849 3003 Eqpt :Voith Propulsion ( H ) Vsp 21R5 / 150-2 Packing Ring P / N:-1822276481000 1.085 3003 Eqpt :Voith Propulsion ( J ) Vsp 21R5 / 150-2 O-Ring P / N:-H01008043 1.0851 3003 Eqpt :Voith Propulsion ( K ) Vsp 21R5 / 150-2 O-Ring P / N:-H01034137 1.0852 3003 Eqpt :Voith Propulsion ( L ) Vsp 21R5 / 150-2 Lock Washer P / N:-H01234462 1.0853 3003 Eqpt :Voith Propulsion ( M ) Vsp 21R5 / 150-2 Shaft Seal Ring P / N:-1822076631000 1.0854 3003 Eqpt :Voith Propulsion ( N ) Vsp 21R5 / 150-2 Grease P / N:-888004440 1.0855 3003 Eqpt :Voith Propulsion ( P ) Vsp 21R5 / 150-2 Reactive Anode P / N:-H82018445 1.0856 3003 Eqpt :Voith Propulsion ( Q ) Vsp 21R5 / 150-2 Screw Plug P / N:-H01047754 1.0857 3003 Eqpt :Voith Propulsion ( R ) Vsp 21R5 / 150-2 Seal Ring P / N:-H01004475 1.0858 3003 Eqpt :Voith Propulsion ( S ) Vsp 21R5 / 150-2 Seal P / N:-H82012954 1.0859 3003 Eqpt :Voith Propulsion ( T ) Vsp 21R5 / 150-2 Seal P / N:-H82012956 1.086 3003 Eqpt :Voith Propulsion ( U ) Vsp 21R5 / 150-2 Gasket P / N:-1822070661000 1.0861 3003 Eqpt :Voith Propulsion ( V ) Vsp 21R5 / 150-2 Seal P / N:-H82015087 1.0862 3003 Eqpt :Voith Propulsion ( W ) Vsp 21R5 / 150-2 Aeration Filter P / N:-1822285431100 1.0863 3003 Eqpt :Voith Propulsion ( X ) Vsp 21R5 / 150-2 Filter Element P / N:-1822316551000 1.0864 3003 Eqpt :Voith Propulsion ( Y ) Vsp 21R5 / 150-2 Thermometer P / N:-H82006778 1.0865 3003 Eqpt :Voith Propulsion ( Z ) Vsp 21R5 / 150-2 Float Switch P / N:-1822091221000 1.0866 3003 Eqpt :Voith Propulsion ( Aa ) Vsp 21R5 / 150-2 Pressure Switch P / N:-H82013502 1.0867 3003 Eqpt :Voith Propulsion ( Ab ) Vsp 21R5 / 150-2 Pressure Switch P / N:-H82013503 1.0868 3003 Eqpt :Voith Propulsion ( Ac ) Vsp 21R5 / 150-2 Thermometer P / N:-H82006773 1.0869 3003 Eqpt :Voith Propulsion ( Ad ) Vsp 21R5 / 150-2 Thermometer P / N:-H82006773 1.087 3003 Eqpt :Voith Propulsion ( Ae ) Vsp 21R5 / 150-2 Thermometer P / N:-H82006774 1.0871 3003 Eqpt :Voith Propulsion ( Af ) Vsp 21R5 / 150-2 Thermometer P / N:-H82007588 1.0872 3003 Eqpt :Voith Propulsion ( Ag ) Vsp 21R5 / 150-2 Thermometer P / N:-H82007587 1.0873 3003 Eqpt :Voith Propulsion ( Ah ) Vsp 21R5 / 150-2 Float Switch P / N:-18220759610I0 1.0874 3003 Eqpt :Voith Propulsion ( Ai ) Vsp 21R5 / 150-2 Split Pin P / N:-H01001667 1.0875 3003 Eqpt :Voith Propulsion ( Aj ) Vsp 21R5 / 150-2 Seal P / N:-H82015086 1.0876 3003 Eqpt :Voith Propulsion ( Ak ) Vsp 21R5 / 150-2 Contamination Indicator P / N:-1822306271000 1.0877 Miscellaneous 1.0878 Pump Coupling Metal Hub Set ( Along With Key ) ( As Per Sample ) 1.0879 Pump Coupling Rubber Insert ( As Per Sample ) 1.088 Rotary Hand Pump 1.0881 Portable Pump ( 1 Hp ) 1.0882 1 Pvc Hose 1.0883 Non Return Valve ( For Portable Pump ) 1.0884 20 Mm Dia Screw Down Valve 1.0885 25 Mm Dia Screw Down Valve 1.0886 Purging Cocks ( As Per Sample ) 1.0887 Grease Gun 1.0888 6H.411.02.0.00 - Air Filter 1.0889 1R-0756 - Fuel Filter 1.089 1R-0726 - Engine Oil Filter 1.0891 226-2779 - Pri Element 1.0892 6H.466.35.0.Pr - Fuel Hose 1.0893 Electrical Spares 1.0894 Main Engine Misc Spares ( Electrical ) 1.0895 2120848 - Speed Timing Sensor ( Primary ) 1.0896 2120848 - Speed Timing Sensor ( Secondary ) 1.0897 3045666 - Intake Air Pressure Sensor 1.0898 3045668 - Fuel Pressure Sensor 1.0899 1619932 - Oil Pressure Sensor 1.09 2123423 - Coolant Temperature Sensor 1.0901 1952150 - Intake Air Temperature Sensor 1.0902 2644297 - Fuel Temperature Sensor 1.0903 2644297 - Oil Temperature Sensor 1.0904 2123425 - Exhaust Temperature Sensor 1.0905 4535609 - Coolant Level Sensor 1.0906 3991522 - Air Starting System 1.0907 2123426 - Magnetic Pickup 1.0908 Motor Operated Plug In Type Mccb Along With All Its Accessories. Rated:-415V, 50 Hz, 3Phase, 250Amps. Make:Schneider Model-Nsx250b 3P Lv431140 1.0909 Advanced Digital Protection Relays ( Generator Protection ) , ( Ct Ratio 200 / 5A, 415V, 50Hz, Aux Voltage 24Dc, Di-Do Supply Unit.24V Dc Modbus Communication Port, Can Bus Redundant &With Governor O / P Suitable For Gac Make Speed Control Unit Model Esd 5200 ) Make:Stucke Electronik, Model: Symap-Y ( G ) 1.091 Drydock And Allied Services ( A ) Docking And Undocking Charges ( Both Versions ) 1.0911 ( B ) Dock Blocks Preparation & Laying Out As Per Docking Plan 1.0912 Dock Hire Charges For An Estimated Duration Of 60 Days As Per Ocr 1.0913 Wet Basin / Alongside Hire Charges For The Remaining Duration ( I.E. Total Refit Duration Of 90 Days – 60 Days Docking Period ) 1.0914 Provision Of Sufficient Lighting For Duty Staff 1.0915 ( A ) Quote For Maintenance Of Two In No. Fire Lines For The Refit Duration . 1.0916 ( B ) Two Each Connection / Disconnection Charges For For The Refit Duration 1.0917 Provision Of Two Transports ( Cars ) For Entire Refit Duration ( One For Refit Co-Ordinating Staff And One For Nd ( V ) Monitoring Team ) For 10 Hrs Or 100Km / Day Whichever Is Less 1.0918 Provision Of Stationory / Office Items For Nd ( V ) / Refit Monitoring Team For Entire Refit Duration Period. Cater Budget Of Rs 4000 / - Per Month. Requirement Will Be Intimated Rmt / Ndv On As Requirement Basis. Payment At Actuals. Note:- Firms To Quote. 1.0919 Mail Man Services ( 02 Nos ) For Entire Refit Duration ( One For User Department And One For Planning / Co-Ordinating Department ) To Be Provided For 10 Hrs Per Day .

Refer document

Refer document

Refer document