Bids Are Invited For Item1 Office Paste 20 Ml. In Tube -Camlin Or Fevigum Specification Of Material - 1. The Paste Should Be A Clean Homogeneous White Adhesive Free From Offensive Odor And Must Not Turn Sour Or Go Moldy, Thicken Or Separate In Any S, ALLAHABAD-Uttar Pradesh

Bids Are Invited For Item1 Office Paste 20 Ml. In Tube -Camlin Or Fevigum Specification Of Material - 1. The Paste Should Be A Clean Homogeneous White Adhesive Free From Offensive Odor And Must Not Turn Sour Or Go Moldy, Thicken Or Separate In Any Season Of The Year Under Normal Conditions. It Should Be Free From Acid Or Alkali And Must Not Have Any Damaging Effect On Paper Etc. It Must Not Contain Any Preservative Which Is Poisonous. 2. It Shall Contain Total Soluble Solid Not Less, Than 18 Percent And Not More Than 22 Percent. 3. The Paste Shall Have The Property Of Adhering Fast Paper To Paper, Cloth, Woods, Glasses, Porcelain And Metal Within A Short Time. It Should Not Decompose Or Loss Its Useful Properties Within 18 Months From The Date Of Supply And If That Happens, The Supplier Will Have To Effect Free Replacement. Item2 Office Paste 50 Ml. In Tube - Camlin Specification Of Material - 1. The Paste Should Be A Clean Homogeneous White Adhesive Free From Offensive Odor And Must Not Turn Sour Or Go Moldy, Thicken Or Separate In Any Season Of The Year Under Normal Conditions. It Should Be Free From Acid Or Alkali And Must Not Have Any Damaging Effect On Paper Etc. It Must Not Contain Any Preservative Which Is Poisonous. 2. It Shall Contain Total Soluble Solid Not Less, Than 18 Percent And Not More Than 22 Percent. 3. The Paste Shall Have The Property Of Adhering Fast Paper To Paper, Cloth, Woods, Glasses, Porcelain And Metal Within A Short Time. It Should Not Decompose Or Loss Its Useful Properties Within 18 Months From The Date Of Supply And If That Happens, The Supplier Will Have To Effect Free Replacement. Item3 Office Paste 150Ml. - Camlin Specification Of Material - 1. The Paste Should Be A Clean Homogeneous White Adhesive Free From Offensive Odor And Must Not Turn Sour Or Go Moldy, Thicken Or Separate In Any Season Of The Year Under Normal Conditions. It Should Be Free From Acid Or Alkali And Must Not Have Any Damaging Effect On Paper Etc. It Must Not Contain Any Preservative Which Is Poisonous. 2. It Shall Contain Total Soluble Solid Not Less, Than 18 Percent And Not More Than 22 Percent. 3. The Paste Shall Have The Property Of Adhering Fast Paper To Paper, Cloth, Woods, Glasses, Porcelain And Metal Within A Short Time. It Should Not Decompose Or Loss Its Useful Properties Within 18 Months From The Date Of Supply And If That Happens, The Supplier Will Have To Effect Free Replacement. Item4 Cello Tape Half Inch - 45 Metre White Specification Of Material- The Tape Should Be Transparent Having Length 45 Metre And Width 0.5Inch ± 1Mm. The Tape Should Be Wound On Circular Hard Board And Have Good Adhesion On One Side. The Performance Should Retain Satisfactory For At Least 18 Month From The Date Of Supply Otherwise The Firm Will Have To Replace Them Free Of Cost. Item5 Cello Tape 1 Inch - 45 Metre White Specification Of Material- The Tape Should Be Transparent Having Length 45 Metre And Width 1Inch ± 1Mm. The Tape Should Be Wound On Circular Hard Board And Have Good Adhesion On One Side. The Performance Should Retain Satisfactory For At Least 18 Months From The Date Of Supply Otherwise The Firm Will Have To Replace Them Free Of Cost . Item6 Cello Tape 2 Inch - 45 Metre White Specification Of Material- The Tape Should Be Transparent Having Length 45 Metre And Width 2 Inch ± 1Mm. The Tape Should Be Wound On Circular Hard Board And Have Good Adhesion On One Side. The Performance Should Retain Satisfactory For At Least 18 Months From The Date Of Supply Otherwise The Firm Will Have To Replace Them Free Of Cost. Item7 Cello Tape 2 Inch - 45 Metre Khakhi Specification Of Material - The Tape Should Be Khakhi Having Length 45 Metre And Width 2 Inch ± 1Mm. The Tape Should Be Wound On Circular Hard Board And Have Good Adhesion On One Side. The Performance Should Retain Satisfactory For At Least 18 Months From The Date Of Supply Otherwise The Firm Will Have To Replace Them Free Of Cost. Item8 Glue Stick Or Fevi Stick 15 Gm - Kores Specification Of Material - Stick With Paper, Photo And Stamp. Nett Weight 15 Gm. Without Solvent Non-Toxic In Nature. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item9 Pin Container Magnetic Specification – The Magnetic Type Pin Container Shall Be Made Of Heavy Plastic. The Body Of The Pin Container Shall Be In Two Parts. The Lower Part Shall Be Made Of Transparent Plastic And Its Height Shall Be 70±5 Mm. And The Upper Portion Shall Have Made Of Soberly Coloured Plastic Of Height 23±2 Mm. The Upper Portion Shall Be Snugly Fitted On The Lower Portion. The Upper Portion Shall Have A Circular Opening Of Diameter 25±1 Mm. And Magnetic Girdle Shall Be Fixed Into The Opening So That When Pins Are Poured Out Of The Magnetic Girdle May Allow Pins Only To Protrude Out Of The Opening And Prevent The Pins From Spilling Out Of It. The Pin Container Shall Be Suitable For Keeping About 50 Gms. Of Pins. Item10 Paper Clip U - Vinyl Coated - Lion Specification-The Gauge Of The Wire Shall Be 18 / 19 S.W.G. U Shape Clips Will Be Preferred. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Each Packet Should Contain 100 Clips. Item11 Allpins ( Pins ) Iron Size–25 ±1 Mm. Long ( Liobn Or Bell ) - 100 Grams Net In Card Board Box Specification - The Gauge Of The Brightly Plated Pins Shall Be 20 / 21 Swg With Sharp Point To Pierce 10 Papers Kept One After Another Of 60 Gsm Substance, Without Undue Pressure On The Hand At The Time Of Pinning. Quantity Of Blunt, Malformed Or Rusty Pins Shall Not Exceed 4.5%. The Pin Shall Remain Rust Free For At Least 18 Months From The Date Of Supply Under Normal Storing Condition. If Otherwise The Supply Will Have To Make Free Replacement. 100 Gms Of Pins Shall Be Packed In A Strong Card Board Box. Ten Such Boxes Shall Be Supplied Packed In An Air-Sealed Moisture Proof Alkathene Bag To Prevent The Pins From Getting Rusted. Item12 Scissor 15 Cm Long - Plastic Handle Specification – The Scissors Shall Be Made Of Suitable Steel. Properly Heat Treated With Satisfactory Cutting Edges. The Finger Holes Shall Comfortable. The Scissors Shall Be Brightly Plated & Plating Shall Not Readily Peel Off. The Surface Shall Be Free From Forge Marks. The Scissors Should Be Quality Marked And Should Be Able To Cut Silk Pieces. They Should Weight 35 Gm ± 5 Gm. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Each Pair Of Scissor Should Be Wrapped In A Thin Wax Paper And Supplied In Grease Proof Paper Packets Containing One Dozen In Each. The Scissors Shall Be Properly Greased At The Time Of Supply To Avoid Rusting. Item13 Clip Board - Plastic - Transparent Specification – The Length Should Be 33.4 ±1 Mm And Width 23.1± 1 Mm. & Thickness 2.5 Mm±.3Mm. The Plastic Should Be Of Good Transparent Acrylic Sheet. At Both Side Edge Tap To Bottom Scale Should Be Embossed. Item14 Waste Paper Basket Plain - Cello Or Neelkamal Specification – The Waste Paper Basket Shall Be Made Of Brightly Colored Plastic Size 24X24.5X17.5 Cms ±1 Mm. The Weight Shall Not Be Less Than 200 Gms. The Lower Portion Of The Wall And The Bottom Shall Be Solid. Baskets Made Of Recycled Plastic Will Not Be Accepted. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item15 Plastic File Folder Superior - Full Scape Base- Red - Sangam Specification Of Material – Size 24.5X34.5 Cms±5Mm. And Weight 55 Gram±2 Gram One Side Plastic Should Be Transparent. The Base Colour Of The Plastic File Folder Should Be Red In Colour. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item16 Solo Folder - Transparent - White - A4 Specification Of Material - Size 22.0X31.0 Cms.±5Mm. Both Side Plastic Should Be Transparent. Item17 Solo Folder -Transparent - Green - A4 Specification Of Material - Size 22.0X31.0 Cms.±5Mm. Both Side Plastic Should Be Transparent Green In Colour Item18 Erazex White - Kores Specification For Material – Correcting Fluid Having 15 Ml. Quantity In Each Phial. Fluid Having Quick Drying Property On Each File . The Fluid Shall Retain Its Useful Properties For 18 Months From The Date Of Supply. If Dries Then The Firm Will Have To Replace At Its Own Cost. Item19 Self Inking Stamp Pad Medium Blue - Camlin Specification – The Rubber Stamp Pad Inked Shall Be In A Tin Box With Smooth Rounded Corners And Hinged Lid, Having Inner Dimension 11X7.0 Cm. ( Inner ) . The Tin Box Shall Be Satisfactory Enameled To Make That Rust Proof. The Pad Shall Have Two Layers Of Felt Of 3 To 4 M.M. Thickness And Two Blotting Papers Mounted On A Rich-Absorbent Wooden Or Plastic Base On Blotting Paper Placed On The Top And Other Lower The Felt. The Whole Pad Shall Be Covered And Fixed By A Piece Of New And Clean Starch Free Cloth. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item20 Self Inking Stamp Pad Large Blue - Camlin Or Korse Specification – The Rubber Stamp Pad Inked Shall Be In A Tin Box With Smooth Rounded Corners And Hinged Lid, Having Inner Dimension 15.9X9.0 Cm. ( Inner ) . The Tin Box Shall Be Satisfactory Enameled To Make That Rust Proof. The Pad Shall Have Two Layers Of Felt Of 2 To 3 M.M. Thickness And Two Blotting Papers Mounted On A Rich-Absorbent Wooden Or Plastic Base On Blotting Paper Placed On The Top And Other Lower The Felt. The Whole Pad Shall Be Covered And Fixed By A Piece Of New And Clean Starch Free Cloth. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item21 Self Inking Stamp Pad Large Black - Camlin Or Korse Specification – The Rubber Stamp Pad Inked Shall Be In A Tin Box With Smooth Rounded Corners And Hinged Lid, Having Inner Dimension 15.9X9.0 Cm. ( Inner ) . The Tin Box Shall Be Satisfactory Enameled To Make That Rust Proof. The Pad Shall Have Two Layers Of Felt Of 2 To 3 M.M. Thickness And Two Blotting Papers Mounted On A Rich-Absorbent Wooden Or Plastic Base On Blotting Paper Placed On The Top And Other Lower The Felt. The Whole Pad Shall Be Covered And Fixed By A Piece Of New And Clean Starch Free Cloth. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item22 Self Stamp Pad Ink - Blue, Black, Red - Camlin Specification – The Fluid Base Of The Rubber Stamp Ink Shall Contain Not Less Than 50% By Volume Of An Hydrous Glycerin. The Ink Should Be Free From Odor And Contain Adequate Coloring Matter. The Rubber Stamp Impression Should Have The Maximum Degree Of Fastness To Light. Ink Contain Saccharine Matter Will Not Be Accepted. The Ink Shall Retain Its Useful Properties At Least 18 Months From The Date Of Supply. If Any Defect Arises Then Firm Will Have To Replace The Item Free Of Cost. Item23 Spiral Note Book Medium Size 40 Pages - Good Quality - Specification -Size Of The Spiral Note Book Should Be 21X13.5 Cms±2Mm. It Should Be Contained 40 Pages Ex-Cluding Cover. Inner Sheets Should Be Ruled And Binding Micro Perforated. Item24 Post It Pad 4X3 Inch - Desmat - High Quality - Specification – The Postit Pad Should Contains 100 Sheets Each Pad Must Bearing The Adhesion On The Top Of The Paper. If Any Defect Arises Then The Supplier Will Have To Make Replacement Free Of Cost At Its Own Risk. Item25 Post It Pad 5X3 Inch - Desmat - High Quality Specification – The Postit Pad Should Contains 100 Sheets Each Pad Must Bearing The Adhesion On The Top Of The Paper. If Any Defect Arises Then The Supplier Will Have To Make Replacement Free Of Cost At Its Own Risk. Item26 Post It Slip With Three Colour - Desmat - Specification – Each Colour Strip Having Width 25 Mm And Length 75 Mm. The Three Colour Post It Slip Should Contains 100 Sheets Each In Three Colours. Pad Must Bearing Adhesion On The Top Of The Paper. Item27 Plastic Scale 12 Inch - Camlin Specification Of Material - It Should With Divisions In Inches And Centimeters Width 25 Mm. And Thickness 1 Mm. ± 2.5%. The Scale Should Be Made Of Good Quality Plastic.

Refer document

INR 110000.0 /-

Refer document