|
| 1 | Taking of actual measurements of existing setup of Fume hood from the site, preparation of drawing based on site measurements & new inputs from E-I-C. Preparation of AutoCAD Drawing of existing setup of Fume hood & submission for approval of EIC. After completion of entire work as-built drawing also to be submitted under this scope of work. (This item includes as built drawing of entire setup after completion of work.) Supplier need to submit two sets of hard copies of drawing on A2 sheets along with soft copy of the same in AutoCAD and PDF format. |
| 2 | Dismantling / Cutting and safe disposal of existing setup consisting of fume hoods along with exhaust ducting,piping etc. as per tender technical specifications. |
| 3 | Fabrication, supply and installtion ofCustomised fume hood as per approved drawing along with utility piping and exhaust ducting & associate work as per tender technical specifications. |
| 4 | Removal of existing glasses of Glove Boxes & instalation of new glasses after surface preparation & associated work as per tender technical specifications & as directed by EIC |
| 5 | Supply of M.S. Structural Materials (ISMC, ISA, square tubes etc as per site requirement and approved drawing) according to IS 808 as per tender technical specifications; |
| 6 | M S structure fabrication work as per tender technical specifications |
| 7 | Surface preparation and painting of steel surfaces as per tender technical specifications |
| 8 | Removal of shutter of existing fume hood , fabrication of new shutter and installation on existing fume as per tender technical specifications. |
| 9 | Fabrication & supply of PVC basedContainments & Airlocks as per tender technical specifications |
| 10 | Fabrication & supply of PVC based Containments alongwith pipe structure as per tender technical specifications |
| 11 | Supply & application of PVC self drying PVC based peelable coating s per tender technical specifications |
| 12 | Supply of Double sided tapes as per tender technical specifications and using for sealing of tent surface with second skin of GB. |
| 13 | Supplyand application of Silane Modified Polymer sealentas per tender technical specifications |
| 14 | Supply of hot air gun as per tender technical specifications and drying of metal surface during tent installation. |
| 15 | Supply of ultrasonic thickness tester as per tender technical specifications for measuring of thickness of existing globe box & fume hood and taking readings at identified points. |
| 16 | Supply , cutting and installation/pasting of neoprene (Minimum 30% neoprene) rubber Sheets of1 m x 2 m size in following thickness, Hardness of sheets should be in the rage of 40 ± 5 Shore A ( as perASTM D2240 05) |
| 17 | 3.0 mm thick |
| 18 | 6. 0 mm thick |
| 19 | Synthetic Rubber Adhesive in pack of 500 ml |
| 20 | Supply, inspection, testing, packing, transportation, safe delivery, guarantee and installation of three piece design stainless steel ball valves as per tender specifications in following sizes; |
| 21 | 8 NB |
| 22 | 15 NB |
