Procurement Of Spares For Esp System 1 INNER ARM ASSEMBLY FOR CERM & EERM consists i)Inner Arm Half-2 Nos. ii)Hex Bolt M16x90-1 nos.(half threaded, grade 4.6) iii) Hex Bolt M16x40-1 nos.(half threaded, grade 4.6) iv) hex nuts M16-2 nos.( grade 4.6) (, Kota-Rajasthan

Procurement Of Spares For Esp System 1 INNER ARM ASSEMBLY FOR CERM & EERM consists i)Inner Arm Half-2 Nos. ii)Hex Bolt M16x90-1 nos.(half threaded, grade 4.6) iii) Hex Bolt M16x40-1 nos.(half threaded, grade 4.6) iv) hex nuts M16-2 nos.( grade 4.6) (MOC EN-08 for flats ) as per drawing / sample 1000 2 OUTER ARM FOR CERM (Total weight 8Kg+/-2.5-5%) i)Roller wheel- 1 no. ii) Arm- 2 nos.(10 mm thick flat) iii)Washer- 2 nos.(45x28x3 mm) iv)Pin - 2 nos.(L114xdia25mm round bar) as per drawing / sample *MOC EN-08 for roller wheel & pin and MS for arms & washers 600 3 OUTER ARM FOR EERM(Total weight 5.3Kg +/- 2.5-5%) i) Roller wheel- 1 no. ii) Arm- 2 nos.(10 mm thick flat) iii)Washer- 2 nos.(45x28x3 mm) iv)Pin - 2 nos.(L114xdia25mm round bar) (*MOC EN-08 for roller wheel & pin and MS for arms & washers) as per drawing / sample 600 4 SLEEVE BEARING BRACKET ASSY. Consists i)Sleeve Bearing/CI Liner (in two halves),C.I.FG-210 - 2NOS. ii)HT hex Nut+ Bolt M12x50- 2nos. iii)MS Strip (40x40x10)- 4 nos. iv)Weld type - 6 (MOC FOR LINER SET IS AS PER IS-210 FG-210) as per drawing / sample 80 5 SET RING (Material EN-08) ID-50+/-0.5mm , OD-75.0m, Height-18.00mm Grub Screw,M10x15 mm-2nos. 80 6 GRIP COUPLING FOR EERM (MOC EN-08 for flat) consists Grub Screw m10x25 mm -1 no. as per drawing / sample 50 7 SHAFT SLEEVE 50 Ø MM (EN-24) Inner dia -50+/- 0.5 mm Outer dia-70+/- 0.5 mm Length- 130+/-1 mm Thickness-10 mm, 40 8 SHAFT SLEEVE 40.5 Ø MM (EN-24) Inner dia -40+/- 0.5 mm Outer dia-50+/- 0.5 mm Length- 120+/-1 mm Thickness-5 mm 25 9 PLAIN BEARING ASSEMBLY FOR RAPPING MECHANISM CONSISTS i)Lower Half -01(IS-210-FG 200) ii) Upper Half -01 01(IS-210-FG 200) iii)Hex Bolt M16X120 mm-02 Nos (4.6 Grade half threded) iv)Hex Nut M16 -02 nos.( 4.6 Grade) *Casting must be free of all kinds of casting defects. 1000 NIB-2177/22-23 15 10 TOP SLEEVE FOR EMMITING SHAFT DIA.40 MM (MATERIAL EN-8) 20 11 END SHAFT FOR CERM DIA 50mm Lenth : 790mm Hole Dia 17mm Material : EN-8 as per drawing / sample 30 12 GD screen material as per IS 513,CRCA sheet 2.5mm (as per Drawing),material of hook MS, 4.00mm thick

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-08-2022		Tender due date is hereby extended	26-08-2022
2	26-08-2022		Corrigendum-II	02-09-2022

Refer document

Refer document

INR 11.67 Lakhs /-