Construction Of Material Recovery Facility ( Mrf ) In The Property Under Sy No.63 / 2 Of Village Naroa Under Xiv / Xv Finance Commission- Earthwork In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Pipeline Trenches Drain ( Not Exceeding 1.5 M In Widthor 10 Sq.M. On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directedwithin A Lead Of 50 M. 2 A ) All Kinds Of Soil 3 Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. 4 Providing & Laying Cement Concrete 1:3:6 ( 1 Cement: 3 Coarse Sand: 6 Graded Granitic Or Basaltic Stone Aggrt. 40 Mm. Nominal Size ) Excluding Cost Of Centering, Shuttering And Finishing In: 5 A ) All Works Upto Plinth Level 6 Providing & Laying Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggrt. 20 Mm. Nominal Size ) Excluding Cost Of Centering, Shuttering And Finishing In: 7 A ) All Works Upto Plinth Level 8 Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) In Foundation And Basement. 9 Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. B ) Murrum 10 Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 ( 1 Cement :4 Coarse Sand ) In Foundation And Basement.+Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. 11 Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With Bricks Of Class Designation 40 Kg / Cm2 12 In Superstructure Upto Floor Five Level 13 Providing And Laying In Position ( 1:11 / 2:3 ) Reinforced Cement Conrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinfrocement ( 1 Cement: 1½ Coarse Sand:3 Graded Stone Agg 20Mm Nominal Size ) 14 A ) All Works Upto Plinth Level 15 B ) In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Structs Etc. Upto Floor Five Level 16 C ) In Beams, Suspended Floors, Roofs Having Slope Upto 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases Upto Floor Five Level 17 Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : 18 I ) Foundations, Footings, Bases For Columns 19 Iii ) Columns, Piers, Pillars, Aburments, Posts And Struts ( Square Rectangle Polygon In Plan ) 20 Iv ) Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth 21 Xiii ) Suspended Floors, Roofs Landings, Shelves & Their Supports 22 Providing Tmt Steel Reinforcement Bars Of ( Sail, Tata. Vizag, Jsw Steel Ltd. ) ) ( Confirming To Is 1786 Of 1986 ) For Rcc Work ( Conforming To I.S. 1786 Of 1986 ) Including Bending, Binding & Placing In Position In All The Floorsalongwith The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. 23 Steel Work In Single Sections ( Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only ) Including Cutting, Hoisting Fixing In Position And Aplying A Priming Coat Of Red Lead Paint. A ) In R.S. Joists, Channels, Angles, Tees 24 A ) Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories ( Tata Make ) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. 25 C ) Add For Providing & Fixing Flashings - [ Corners, Ridges, Valleys, Gable End & Trims ] ( Girth Upto 610Mm ) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. 26 Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. 27 A ) Plain Grill 28 Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates ( 2004 ) Vol & Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Windows With Two Sliding Shutters Using 18 Mm Series Shutters Section. 29 A ) Plain Glass 30 Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates ( 2004 ) Vol & Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Adjustable Louvered Windows. 31 Figured Glass 32 Single Colour Foam Core Frp ( Fiber Reinforced Polymer ) Door Shutter 33 Single Colour Foam Core Frp ( Fiberreinforced Polymer ) Door Shuttermanufacture, Supply And Installation ( Including Accessories As Mentioned Below ) Of Epee Or Equivalent Goan Make Frp ( Fiber Reinforced Polymer ) Door Shutter Of Specified Thickness As Per Options Below By Using Tray System With Seasoned Hard Wood, Moisture Less Than 17%, Wood Styles For Top Rail And Lock Rails. Frp ( Fiber Reinforced Polymer ) Laminate Made Up Of450 Grams Per Sq.Mts ( Gsm ) Chop Strand Matt And Unsaturated Polyester Resin With Viscosity Range Of 400 / 450 Centipoises Per Second ( Cps ) . The Core Of Shutter Will Be Filled As Specified ( Expanded Polystyrene Foam / Polyurethane Foam ( Eps / Pu ) Foam ) . The Shutter To Be Of Single Colour & Water Proof As Well As Mild Acid / Alkali Resistant Manufactured Using Rv Tifac ( R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council ) Technology In Line With Is 13034 1990 Test Standard In An Iso 9001 – 2015 Certified Factory. 34 Accessories: 35 I ) S. S. Hinges 4” - 3 Nos 36 Ii ) S. S. Latch - 1 No 37 Iii ) Tower Bolt 5” - 2 Nos 38 Iv ) Handle 5”- 2 Nos 39 Shutter Thickness:B ) 35Mm 40 Frp ( Fiber Reinforced Polymer ) Framesmanufacture, Supply And Installation ( Withanchor Fastener ) Of Epee Or Equivalent Goan Make Frp ( Fiber Reinforced Polymer ) Frame Of Cross Section As Per Options Below With Right Angle Joint And Frp ( Fiber Reinforced Polymer ) Laminate Made From 450 Grams Per Sq.Mts ( Gsm ) Chop Strand Glass Fiber ( Matt ) And Saturated Polyester Resin With Viscosity Range Of 400 / 450 Centipoises Per Second ( Cps ) . The Core Of Frame Would Be Filled With Seasoned Wood As Infill Material. The Slot Of Frame For Door Resting Will Be Of Suitable Width So As To Take Specified Thickness Door.. The Frame Will Be Water Proof As Well As Mild Acid / Alkali Resistant Manufactured In An Iso 9001- 2015 Certified Company 41 Specified Cross Section: D ) 5” X 2 ½ “ 42 12Mm Cement Plaster 1:4 ( 1 Cement : 4 Fine Sand ) 43 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand ) And Top Layer 6Mm Thick With Cement Plaster 1: 3 ( 1 Cement : 3 Coarse Sand ) Finished With Sponge. 44 Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture ( Such As Dulex / Asian Paints / Sherwin Willians ) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. 45 Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 46 Applying One Coat Of Distemper Primer Of Approved Brand And Manufacture On Wall Surface. 47 Wall Painting ( Two Or More Coats ) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. 48 Applying Priming Coat With Ready Mixed Red Lead Paint Of Approved Brand And Manufacture On Steel Work. 49 Painting Two Or More Coats ( Excluding Priming Coat ) With Superior Quality Ready Mixed Paint For Steel Work Of Approved Brand & Manufacture In All Shades On New Work To Give An Even Shade. 50 Providing And Fixing Vitrified Antiskid Tiles ( 320X320 ) And 10Mm Thick Tiles In Floor, Treads Of Steps, Landing On 25Mm Thick Bed Of Cement Mortar 1:3 And Jointed With Cement Slurry Complete. 51 Providingand Fixing Coloured Ceramic Tiles Spartek Or Equivalent Of 12 X 12 ( 399X150 Mm Cut Size ) 6 Mm Thick In Skirting And Dados On 12 Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) Andjointed With Cement Slurry Complete. 52 Proving And Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type W.C. Pan ) Size 580 Mm With 100 Mmsand Cast Iron P. Or S Trap 10 Litres High Level P.V.C. Flushing Cister ( Of Approved Make ) With Fittings, Rack Bolts 32 Mm Diameter P.V.C Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C. Over Flow Pipe Withspecials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon Pull Complete Cutting And Making Good The Walls And Floors Where Required. 53 Long Pan Pattern W. C. Pan 54 Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. 55 Flat Back Wash Basin Size 630 X 450Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. 56 Kotah Stone Slab Flooring Over 20 Mm ( Average ) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 57 20 Mm Thick. 58 Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : 59 Providing And Fixing Chlorinated Ployvinyl Chloride ( Cpvc ) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall ( Medium Duty Sdr 13.5 Pipe ) . 60 20 Mm Outer Dia Cpvc Pipe 61 Providing And Fixing Brass Bib Cock ( Heavy ) Of Approved Quality : 62 15 Mm Nominal Bore 63 Providing And Fixing Brass Stop Cock ( Heavy ) Of Approved Quality : 64 15 Mm Nominal Bore 65 Providing And Fixing Brass Full Way Valve ( Heavy ) Duty With Wheel Of Approved Quality : 66 15 Mm Nominal Bore 67 Providing And Fixing Nahani Trap Of Rigid Pvc ( Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door : 68 110 Mm Dia 69 Providing And Placing On Terrace Roof Of Floor Two ( 1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming Toi S 12701; 1996. 70 500 Lit. Capacity 71 Providing And Fixing Rigid Pvc S.W.R. ( Soil, Waste & Rain Water Drainage Pipes Ofapproved Including Lubricant Etc. Complete ( Single / Double ) Socketed: 72 110 Mm Dia 73 Providing And Fixing Rigid Pvc Bend ( Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend Withdoor : 74 100 Mm Dia 75 Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 ( 1 Cement :5 Fine Sand ) R.C.C. Top Slab With 1:2:4 Mix ( 1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix ( 1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size ) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix ( 1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size ) Neatly Finished Complete As Per Standard Design. 76 Inside Size 60 X 60Cmand 60Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610mm Internal Diameter Total Weight Of Cover And Frame To Be Not Less Than 38 Kg. ( Weight Of Cover 23 Kg ) .
