Equipment Items Equipment Items , Module 1 - Arduino Uno - Atmega328 Microcontroller, Input Voltage - 7-12V, 14 Digital I/O Pins(6 Pwm Outputs), 6 Analog Inputs, 32K Flash Memory, 16Mhz Clock Speed. , Module 2- Esp32 As Node Mcu With Wi-Fi And 1St Bluetooth - Xtensa® Dual-Core 32-Bit Lx6 Microprocessor(S) , Cp2102 Usb-Uart Bridge, 4 × Spi, 2 × I²s Interfaces ,2 × I²c Interfaces 3 × Uart, 1 Host (Sd/Emmc/Sdio) , 34 × Programmable Gpios ,12-Bit Sar Adc Up To 18 Channels , 2 × 8-Bit Dac , 10 × Touch Sensors , Module 3 - Led-5Mm Red Color , Lamp Light Emitting Diode , Dc 3V - 5V Push Buttons-Through-Hole Design, Shaft Shape: Square, High Operating Force (3.0Nor 3.6N) Suited To Automotive Equipment Requirements. Dc Servomotor- Operating Voltage: 3.0V~ 7.2V, Operating Speed: 0.12Sec/60 Degree, Output Torque: 1.6Kg/Cm , .8V 5V Dc Relay- 5 V-5V Ttl Control Signals, The Control Pins With Pull-Down Circuit , Blue Kf301 Terminal Control Measure . , Module 4- Mini Bread Board- Matching Jumper, Diameter 0.8Mm, Accepts 20-29 Awg Wire Sizes, Phosphor Bronze Nickel Plated Spring Clips. , Module 5- 16X2 Lcd Display- 5 X 8 Dots Includes Cursor, Yellow Backlight , Module 6 - Infrared Sensor- Operating Voltage Is 5Vdc, I/O Pins – 3.3V & 5V.,The Range Is Up To 20 Centimeters., The Supply Current Is 20Ma. Lm35 Temperature Sensor - Linear + 10 Mv/°C, Scale Factor, 0.5°C, Ensure Accuracy (At +25°C) Ultrasonic Sensor- Working Voltage :5V(Dc), Working Current : 15Ma, Working Frequency : 40Hz, Output: 0-5V , Beam Angle : Max 15 Degree , Distance : 2Cm – 400Cm, Input Trigger Signal : 10Us Impulse Ttl , Connecting Wires - Length: 20Cm , Color: Multicolor , Material: Copper Wire, Jumper Wires (Male To Female, Male-To-Male ,Female-To-Female Jumpers) => Limited