|
| 1 | Upper Deck assy and lift cylinder mounting |
| 2 | Upper deck Arm place both side pin seat damaged, oval and worn out portionrepairing andrectification with the help metal filling by special weldingelectrodes as required up toroundness and after welding re- shaping by grinding/machining as per pin sizeboth side |
| 3 | Lift cylinder place both side pin seat damaged, oval & worn out portion repairing & rectification with the help of metal filling by special weldingelectrodes as required up to roundness & after welding re- shaping by grinding as per pin size & also making required size, distance ring 02 Nos. & welding with both side of lifting cylinder pin place with centre & alignment and also making locking arrangement of pin both side. |
| 4 | EN- 9 steel bush new making as per sample size – |
| 5 | Lift cylinder worn out pin welding by special electrodes then machiningas per original shape – |
| 6 | Upper deck bodies broken bolts removing by drilling. |
| 7 | Over size new thread making by tapping. |
| 8 | Lift cylinder opening and fitting in mounting and upper deck arm assy. |
| 9 | Hydraulic traction motor assy. RH side |
| 10 | Providing and fixing of shaft |
| 11 | Providing of piston complete |
| 12 | Providing and fixing of ring spacer shim |
| 13 | Providing and fixing of spacer bearing |
| 14 | Replacement of shaft seal kit. |
| 15 | Replacement of bushing setting screw |
| 16 | Complete opening overhauling and reassembly |
| 17 | Recoil assembly – 02 nos |
| 18 | Recoil Shaft new making 16.5” long X 1.5” OD with nut fitting with supportingplate fitting welding in shaft 04 Nos. plate fitting11” long X 1.5” wide andcompletely welding- |
| 19 | Broken recoil spring welding with LH electrodes- |
| 20 | Complete assy. dismantling repairing and assembling with hyd. Press- |
| 21 | Track chain adjusting bolt new making with head and adjustment nut size 60mm Head X 430mm length X 45mm OD X 300mm long thread. |
| 22 | Front Idler assembly- 02 nos. |
| 23 | Track chain Idler assy. dismantling, full overhauling repairing and assembling. |
| 24 | Repairing of worn out portion of idler bracket seat collar by welding and machining as per original dimension for proper assembly |
| 25 | Repairing of worn out bearing seat and colour of idler shaft by welding machining. |
| 26 | Damaged and worn out Bearing cover seat repairing by welding metal filling, and machining as per bearing seat and dust seal |
| 27 | Broken and seized bolt removing by drilling from Idler collar- |
| 28 | New thread making in idler collar- |
| 29 | Providing and fixing of H.T bolts 12mmX30mm- |
| 30 | Providing and fitting of Bearing 4T- 623/612 - |
| 31 | Providing and fixing Idler seal kit |
| 32 | Total impact of GST for the purpose of CTC |
