Repairing Work Of Monkey Catch Bevel Pulley Etc- 1 Making / Fabrication Of Monkey Catch- 05 Sets 2 5 / 2.5” Size Channel Cutting By Gas Set- 20 Mouth- ( 10” X 20 Nos. ) 3 5 / 2.5” Size Channel Cutting- 42” Long X 05 Nos. 4 10 / 5” Size Joists Cut, dhori-Jharkhand

Repairing Work Of Monkey Catch Bevel Pulley Etc- 1 Making / Fabrication Of Monkey Catch- 05 Sets 2 5 / 2.5” Size Channel Cutting By Gas Set- 20 Mouth- ( 10” X 20 Nos. ) 3 5 / 2.5” Size Channel Cutting- 42” Long X 05 Nos. 4 10 / 5” Size Joists Cutting 20 Nos. ( 20” X 20 Nos. ) 5 Joist Middle Cutting 24’ Long = 12” X 24 X 05 Nos 6 Rail Cutting By Gas Set- 10 Mouth- ( 18” X 10 Nos. ) 7 Rail Cutting 24” Long Both Side- 10 Nos.- ( 24” X 02 X 10 Nos. ) 8 Hole Making 3 / 4” Size- 04 Nos. In Each Rail X 05 Nos 9 Channel Welding 40 Mouth In Rail- ( 10” X 40 Nos. ) 10 Hole Making In Frame 3 / 4” Size- 04 Nos. In Each Frame X 05 Nos.T 11 Bevel Pulley With Frame 08 Sets 12 Bottom Plate Rivet Cutting 01” Size 18Nos. ( 03” X 18 Nos. X 08 Nos 13 2. 5 / 2.5”Size Channel Cutting 80 Mouth ( 10” X 80 Nos. ) 14 Tub Wheel Axle Dismantling By Hyd. Press – ( 02 Mouth X 08 Nos. ) 15 Shaft Cutting 02 Nos. In Each Shaft = ( 06” X 02 Nos. ) X 08 Nos. = 16 Shaft Machining – 02 Mouth Each Shaft = 02 Nos. X 08 Nos. 17 Shaft Lock Hole Making 18 Channel Middle Portion Cutting 02”Round 16 Nos. ( 06”X16nos. ) 19 Shaft Fitting And Welding With Channel–08Nos.In 03Layer ( 06”X03x 08 No 20 Pulley Caller Making 01 Side By 3 / 4”Size Rod 40” Long Bending And Setting On Caller And Completely Welding In02 Layer- ( 40”X 02 ) X 08 Nos 21 Making / Fabrication Of Stop Block For Track Line 04 Sets 22 5 / 2.5”Size Channel Cutting By Gas Set- ( 31”Longx10”Wide ) = 32 Mouth = ( 05”+2.5” X 02 ) X 32 Nos 23 4 / 2” Size Channel Cutting- 32 Mouth- ( 04” + 02” X 02” ) X 32 Nos 24 Rail Cutting By Gas Set- 16 Mouth- ( 18” X 16 Nos. ) 25 Rail Cutting 24” Long Both Side- 08 Nos.- ( 24” X 02 X 08 Nos. ) 26 Hole Making In Rail 3 / 4” Size- ( 03 Nos. Each Rail X 08 Nos. 27 4 / 2” Size Channel Welding With Rail 03 Mouths In Each Rail Two Layers - ( 08” X 03 X 02 X 04 Nos. ) 28 Hole Making In Frame 3 / 4” Size- 03 Nos. In Each Frame X 04 Nos. 29 Total Impact Of Gst For The Purpose Of Ctc

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-08-2022	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	06-08-2022

Refer document

INR 1500.0 /-

Refer document