|
| 1 | Medical Consumables/ Non Expendable Stores: |
| 2 | Osteotomestraight, stainless steel, 20.32 cm long, 1.27 cm wide |
| 3 | Osteotome , curved, stainless steel, 20.32 cm long, 1.27 cm wide |
| 4 | Pins (Steinmann) 15 cm X 4 mm dia S.S. trocar point 3 faced chuck end |
| 5 | Retractor Humeral head |
| 6 | Stirrup, Extension (Bohler), 8.75 cm internal width |
| 7 | Wire (Kirschner) with drill head ended 25 cm long X 1.5 mm dia, stainless steel |
| 8 | Long nose plier |
| 9 | Drill Bit 2.0 mm |
| 10 | Drill Bit 2.7 mm |
| 11 | Cortex screw 2.7mm x 10mm |
| 12 | Cortex screw 2.7mm x 12mm |
| 13 | Cortex screw 2.7mm x 14mm |
| 14 | Cortex screw 2.7mm x 16mm |
| 15 | Cortex screw 2.7mm x 18mm |
| 16 | Small washers 7mm (2.7mm screws) |
| 17 | Bone graft Impactor straight |
| 18 | Bone graft Impactor curved |
| 19 | Mother Tags with Colour Coding |
| 20 | Arm Pouch |
| 21 | Soft Collar |
| 22 | Cling Drape Sterile 2 meter |
| 23 | Universal extremity drape- SMS Fabricand dimension 90 x 131 in, Fenestration - One 2.5 in. Conformable Circular, Fabric Tube Holders, CONTROL* Plus Fabric Reinforcement, CE Certified, AAMI L-4 Compliance |
| 24 | U drape with SMS Fabric and dimension 76 in. x 120 in, 4 in. x 40 in. split, Tube holders, 1.5 in. adhesive tape, CE Certified, AAMI L-4 Compliance |
| 25 | sterile Post op dressings with soft breathable cover, highly absorbent pad,low allergy adhesive size 8 inchx 4 inch |
| 26 | Headless Compression Screw with differential pitch 10-50 mm in increment of 2 mm with compatible guide wires |
| 27 | SS Wire rolls 18/20/22 gauge |
| 28 | Guide Wire 2.5 mm dia x 22 cm |
| 29 | Wire (Kirschner) with drill head ended 25 cm long X 1.8 mm dia, stainless steel |
| 30 | 2.4 mm Variable angle Dorsal Distal Radius Locking Compression plate for fregment specific fracture fixation variable angle screw placement with compatible 2.4 mm locking head screws 06 and 3.5 mm cortical screws 03, Left, Ti/TAN |
| 31 | Calcaneal Locking Plate 3.5, Len.69mm, Right, Ti/TAN |
| 32 | Calcaneal Locking Plate 3.5, Len.76mm, Right, Ti/TAN |
| 33 | Calcaneal Locking Plate 3.5, Len.69mm, Left, Ti/TAN |
| 34 | Calcaneal Locking Plate 3.5, Len.76mm, Left, Ti/TAN |
| 35 | 3.5 mm,10 hole, AnterolateralDistal Tibial Locking Plate with compatible 6 locking screws and 04 cortical screws,Left, Ti/TAN |
| 36 | 3.5mm, Proximal Posterior Tibial Locking Plate with compatible 02 cortical screws and 04 locking screws, 4/5/6 holes, Right |
| 37 | 3.5 mm, Proximal Posterior Tibial Locking Plate with compatible 02 cortical screws and 04 locking screws, 4/5/6 holes, Left |
| 38 | 4.9 mm Locking Bolts Ti/TAN, compatible with AFN,ETN and PFNA.30 mm – 90 mm ( 5mm increments) |
| 39 | Titanium Elastic Nail System, Dia. 1.5/2.0/2.5/3/3.5/4 mm x 400mm |
| 40 | 4.5/5mm, Locking head Screw, self-tapping, Hexagonal head recess, , dia., len.26 to 95 mm in increments of 5mm,Ti/TAN |
| 41 | 4.5 mm cortical Screw, self-tapping, Hexagonal head recess, , len.14to 60mm in increments of 2mm, Ti/TAN |
| 42 | 3.5 mm cortical Screw, self-tapping, Hexagonal head recess, length 10-50 mm in increment of 2 mm, Titanium/TAN |
| 43 | 3.5 mm Locking head Screw, self-tapping, Hexagonal head recess, length 10-50 mm in increment of 2 mm, Titanium/TAN |
| 44 | 7 mm, Partially Threaded cannulated Cancellous Screw with compatible washer, titanium/TAN, self-tapping, 16 mm thread length ,total length 30 to 100mm in increments of 5mm |
| 45 | 7 mm, Partially Threaded cannulated Cancellous Screw with compatible washer, titanium/TAN, self-tapping thread length 32mm ,total length 45 to 100 mm in increments of 5mm |
| 46 | 7 mm, fully Threaded solid Cancellous Screw with compatible washer, titanium/TAN, self-tapping,length 25 to 100 mm in increments of 5mm |
| 47 | 3.5 mm, LC-LCP with combihole for cortical and locking screw with 06 cortical and 03 locking Screws Titanium/TAN, 6/7/8/9/10mm holes |
| 48 | 4.0 mm, partially threaded cannulated Cancellous screw (16 mm thread length), len.35 mm to 50 mm in increments of 5 mm, Ti/TAN |
| 49 | 4.0 mm Fully threaded Cancellous bone screw, len.35 mm to 60 mm in increments of 5mm, Ti/TAN |
| 50 | Washer for 4 mm, Partially Threaded Cannulated Cancellous Screw, Titanium/TAN |
| 51 | Washer for 4 mm, Partially Threaded Cannulated Cancellous Screw, Stainless steel |
| 52 | Sterile HA Coated Tapered Pins 4.5 to 3.5 mm 120 mm length |
| 53 | Charnley\"s Compression Clamp pair SS for Arthrodesis |
| 54 | Rail Fixator consisting of Rail 400 mm ( 1 No.), Central Clamps ( 2 Nos.), End Clamps ( 1 No.), CD Unit ( 1 No.) |
| 55 | Sterile HA Coated Tapered Pins 6 to 5 mm 170/200 mm length |
| 56 | Sterile HA Coated Tapered Pins 4.5 to 3.5 mm 100 mm length |
| 57 | Acetabular rim plate 8/10/12 mm for pelvis fractures |
| 58 | Arthroscopy shavers Blade compatible with Karl Storz System |
| 59 | Arthroscopy ultrasonic ablators hook compatible with Mitek system |
| 60 | Joint irrigation fluid 3lts in collapsible packs Normal Saline |
| 61 | Hydroxyappetite coated Biocomposite Absorbable Interference reverse thread Screw (PLDLA/PEEK material), Dia. 8/9/10mm & Len. 20/25/30mm, Sterile pack |
| 62 | Biocompatible Fenestrated screw dia 12X30mm (PLGA, Calcium Sulphate &ß-TCP) for revision ACL Surgeries |
| 63 | Tibial Post Fixation Screw, Sterile, Dia. 6.5 x 30mm, Ti/TAN, sterile pack |
| 64 | Graft Passing Pin with Eye Hole, (Beath Pin) Drill Tip, Dia. 2.4 x 355mm Len. |
| 65 | Endoscopic Reamer, Cannulate, Dia. 4.7mm, 3 Side Laser Marking |
| 66 | Single loaded Biocomposite Suture Anchor (PEEK/PLDLA material) preloaded with fibre wire, Dia. 2.8mm/3.0mm/5mm Sterile |
| 67 | Tissue penetrator cum suture retriever Athro pierce angle 45 and 22.5 degree |
| 68 | Fiber Wire with needle, Multi color, Size 2, Sterile |
| 69 | Disposable Suture Passer, 45*, Sterile, Right |
| 70 | Camera cover for Arthroscope |
| 71 | Uncemented total hip replacement system consisting of ; Primary uncementedproximally coated double taper Hip Stem- Collarless, reduced lateral shoulder double taper wedge titanium stemwith slim AP dimension proximally coated available in standard and extended offset with compatible Biolox Delta Ceramic head. Primary uncemented acetabular shell with UHMWPE liner consisting of:Titanium coated primary acetabular shellwith highly crosslinked/epoly Polyethylene liner in taper lock design and two 6.5 mm cancellous screws. Should be supplied with Dome and screw hole caps / Solid option. Should be compatible with a ceramic liner. Should be supplied with Pulse Lavage (All implant sizes with compatible instrumentation and saw system to be provided at the time of surgery, Implant should have registry follow up data. USFDA approved / EU-CE certified) |
| 72 | Disposable Pulse lavage system with one dual cone splash shield tip and one long intramedullary tip Pulse lavage hand piece |
| 73 | Non absorbant Synthetic cotton role 10 cm width |
| 74 | Trauma drape pack for upper limb consisting of one impervious U Drape, one impervious O drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. |
| 75 | Trauma drape pack lower limb consisting of one impervious U Drape, one impervious O drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. |
| 76 | Sterile disposable universal extremity drape with conforming circular fenestration & tube holders, 90” x 124” (Compliant with ISO-11607-2, ISO 11810-1standards) 15% variation in size acceptable. |
| 77 | Non-Adhesive Elastic reusable Compression crepe Bandage 10 cm x 4.5 m (100% cotton and autoclavable) |
| 78 | Steinmann Pins Dia 6.0 mm x 175 mm long with trocar tip and 3 faced chuck end. |
| 79 | Denham Pin (30-50mm threading in the middle)5.0 mm x 175mm long with trochar tip and 3 faced chuck end. |
| 80 | Schanz screws 5 mm (self tapping) with 40- 50mm threading, 200 mm length stainless steel. Material-316 Lvm stainless steel. |
| 81 | Tapered Schanz pin 6/5mm taper, threaded portion 50 mm, total length 175-200mm. Material-316 Lvm stainless steel. |
| 82 | Hydoxyapatite coated Tapered Schanz pin 6/5mm taper, threaded portion 50 mm, total length 175-200mm. Material-316 Lvm stainless steel.(Sterile Packed) |
| 83 | Hydoxyapatite coated 4.5/3.5mm Tapered Schanz pin, threaded portion length 30-40 mm, total length 140-160mm. 316Lvm stainless steel.(Sterile Packed) |
| 84 | AO pattern Cortical screws 3.5mm dia, self tapping, lengths 10 to 70 mm Titanium. |
| 85 | AO pattern Locking head screws 3.5mm dia, self tapping, lengths 10 to 90 mm Titanium, should be MRI safe. |
| 86 | AO pattern cortical screws,4.5mm dia, self tapping, lengths 18 to 80 mm, Material- Titanium, should be MRI safe. |
| 87 | AO pattern Locking head screws 5 mm dia, self tapping, lengths 14 to 95 mm, Titanium, should be MRI safe. |
| 88 | AO pattern 4.0 mm partially threaded cannulated cancellous screws 20 to 80 mm length with washer Titanium, should be MRI safe. |
| 89 | AO pattern 6.5mm cannulated Cancellous screw, fully threaded, self-tapping, Length 30mm to 100mm with washer Titanium, should be MRI safe. |
| 90 | AO pattern 6.5mm cannulated Cancellous screw, 16 mm partially threaded , self-tapping, Length 35mm to 100mm with washer Titanium, should be MRI safe. |
| 91 | AO pattern 6.5mm cannulated Cancellous screw, 32 mm partially threaded, self-tapping, Length 35mm to 115mm with washer Titanium, should be MRI safe. |
| 92 | AO pattern LC-DCP plate 3.5mm, 6-9 dynamic holes with 7 self tapping 3.5mm cortical screws complete construct-Titanium |
| 93 | AO pattern LC-DCP plate 3.5mm,10-14 dynamic holes with 8 self tapping 3.5mm cortical screws complete construct-Titanium |
| 94 | AO pattern locking Reconstruction plates 3.5 mm, 8-14 holes with compatible 8 locking screws -Titanium complete construct. |
| 95 | 3.5mm low profile locking Pelvic reconstruction plates 12 holes curved with 10 x cortical/cancellous screws complete construct. Implants should be MRI safe. |
| 96 | End Cutter shaver blades 4.5mm for arthroscopoic shaver system. Implants should be USFDA / CE (European) approved/certified, sterile packed disposable.Should be compatible with Karl storz shaver system. |
| 97 | Cannulated Screw driver for Headless compression Screw |
| 98 | Ethibond (Ployester) No 5, sterile |
| 99 | Taylor Brace |
| 100 | Clavicular Brace (Size:-L) |
| 101 | Clavicular Brace (Size:-XL) |
| 102 | Coccyx Cushion Soft |
| 103 | Skin traction Kit |
| 104 | TKR PS |
| 105 | TKR PS High Flex |
| 106 | TKR |
| 107 | Marking Pen |
