Group A- Boundary Wall Repair And Uplift Work At Budhpur Station - Budhpur Boundary Wall Works 2 Surface Dressing Of The Ground In All Kinds Of Soil Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Dis Posal Of Rubbish, All Works Up To Any Lead & Lift As Directed By The Engineer-In-Charge. 3 Extra For Levelling & Neatly Dressing Of Disposed Soil Completely As Directed By The Engineer-In-Charge. 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 5 1:2:4 [ 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From N Atural Sources ] 6 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fille Ts, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering , Shuttering, Finishing And Reinforcement, With : 7 1:1.5:3 [ 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived Fr Om Natural Sources ] 8 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights : 9 Columns, Pillars, Piers, Abutments, Posts And Struts 10 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Pl Inth Level : 11 Thermo-Mechanically Treated Bars Of Grade Fe-500 D Or More 12 Supplying, Fabricating And Fixing M.S. Structural Steel Work Made Of Joists, Tubes, Pipes, Channels, Angles, Plates, Flats, Bars Etc ., For Struts, Chain Link Fencing Posts As Per Drawing Includinggate, Ladders, Safety Grills, Walkways, Collapsible Gate, Signboar Ds, Supports For Cable Trench, Making Slots For Barbed Line, Wire Hoisting, Placing In Position, Embedding In Concrete, Applying Twocoats Of Epoxy Paint Epilux 155 High Build Enamel Over A Coat Ofepilux 610 Primer Of M / S Berger Or Any Other Approved Equivalen T Make As Permanufacturer’S Recommendation, Complete In All Respect Including Cutting To Required Size Welding Of Joints, Fixing A Nchor Plates, Bolts, Theading, Nuts, Washers, Sleeves Etc. And Necessary Lettering Of Approved Pattern On Main Gate, Signboards Etc.C Omplete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directio Ns Of The Engineer-In-Charge. ( Excluding The Cost Of Concrete Work ) . 13 Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Metre Openable Length ( Total Length 90 M ) , Having 50 Nos Rounds Per 6 Metre Length, Up To 3 M Height Of Wall With Existing Angle Iron Y Shaped Placed 2.4 M Or 3.00 M Apa Rt And With 9 Horizontal R.B.T. Reinforced Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including N Ecessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per The Directions Of Engineer-In-Charge, With Reinforced Bar Bed Tape ( R.B.T. ) / Spring Core ( 2.5 Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sq.Mm With Tape ( 0.52 Mm Thick ) And Weight 4 3.478 Gm / Metre. [ Note: Cost Of M.S. Angle, C.C. Blocks Shall Be Paid Separately ] . 14 Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, B Uffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Comple Te, Including Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Require D Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of The Engineer-In-Charge. [ Note : For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, F Asteners Etc. ] 15 20 Mm Cement Plaster Of Mix : 16 1:4 ( 1 Cement : 4 Fine Sand ) 17 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade : 18 New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 19 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wa Ll Surface To Prepare The Surface Even And Smooth Complete. 20 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratch Es Etc. Complete. 21 Dismantling And Stacking Within 50 Metres Lead, Fencing Posts Or Struts Including All Earth Work And Dismantling Of Concrete Etc. Inbase Of : 22 T Or L Iron Or Pipe 23 R.C.C. 24 Dismantling Barbed Wire Or Flexible Wire Rope In Fencing Including Making Rolls And Stacking Within 50 Metres Lead. 25 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dump Ing Ground Within 50 Metres Lead. 26 Demolishing R.C.C. Work By Mechanical Means And Stockpiling At Designated Locations And Disposal Of Dismantled Materials Up To A Lea D Of 1.0 Kilometre, Stacking Serviceable And Unserviceable Material Separately Including Cutting Reinforcement Bars. 27 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Tr Ansporting, Unloading To Approved Municipal Dumping Ground Or As Approved By The Engineer-In-Charge, Beyond 50 M Initial Lead, For A Ll Leads Including All Lifts Involved. 28 Wall Lining Butch Work Upto 10M Height With Dholpur Stone 40 Mm Thick Rough Facing On The Exposed Surface With Stone Strips Of Minim Um Length 300 Mm And Required Width, Including Embedding Every Tenth Layer And Bottom Most Layer In Masonry Or Concrete After Makingnecessary Chases Of Size 75X75 Mm And By Providing Layer Of 75 Mm Thick Strips I / C 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) I / C Ruled Pointing In Cement Mortar 1:2 ( 1 White Cement : 2 Stone Dust ) With An Admixture Of Pigment To Match The Sh Ade Of Stone Complete As Per Direction Of Engineer-In-Charge. 29 Supply, Installation, Fixing In Position, Pvc Conduit Pipes, Of Isi Marked , In Concrete, Brick Work Etc. During Or After Constructi On By Making Grooves In The Wall, Ceiling Etc. Cutting Threads And Jointing The Pipes With Pvc Couplers, Providing Necessary Tees, B Ends, Junction Boxes Etc. With 12 Swg Gi Wire Inside Conduit Without Joint For Concealed Wiring, Including Making Good The Concrete, Brick Work, Surfaces Etc. Complete As Per Drawings And Direction Of Site Engineer / Engineer-In-Charge Including Cost Of All Labour , Materials Etc.: 32 Mm 30 Copper Cables-1.1 Kv, Xlpe Insulated, Extruded Pvc Type St-2 Inner Sheathed, Galvanized Armoured, Pvc Type St-2 Overall Sheathed, St Randed, Frlsh, C2, Smoke Density<40% Cu, 2Cx2.5 Mm², 2Xwy 31 Laying Of All Type Of Cables Lt ( Pvc / Xlpe / Armoured / Unarmoured / Power / Control / Signalling ) In Trenches, In Cable Racks, In Trays, In Protective Pipes, Poles, Columns, In Conduits, In Panels And On Structures Etc.; Including The Supply And Installation Of All Re Quired Materials Such As Fixing Clamps, Screws, Cable Straps, Tags, Etc. As Required ( Other Than The Supply Of The Conduits, Cables, Pipes, Cable Racks, Trays, Poles, Structures And Panels ) Complete In All Respect, Including Cost Of All Labour, Tools, Consumable M Aterials, Etc. And Cutting The Cables In Required Lengths As Per Drawings, Specification And Directions Of Site Engineer / Engineer- In-Charge: Power Cables Lt : Od Upto 20 Mm
