|
| 1 | C.I.Pipe With Standard Thickness & Flange As per I.S.I. Specification machined From dia 4\" To 12\" |
| 2 | New Material Supply Basis |
| 3 | On Conversion Basis |
| 4 | C.I. Bend, Duck Foot Bend, Cross,Tee And Other Such Part All Size As per Drg. |
| 5 | New Material Supply Basis |
| 6 | On Conversion Basis |
| 7 | C.I.Drum, Rod,Bush, Bari,Idler Pully, Break Drum For Cane Unloader etc As per Drg. |
| 8 | New Material Supply Basis |
| 9 | On Conversion Basis |
| 10 | C.I.Coupling From 4\"DIA To 10\"DIA Plane/Flange Type |
| 11 | New Material Supply Basis |
| 12 | On Conversion Basis |
| 13 | C.I. Firing Frame,Door Side Chamber, Bagasse Rotary Chuts, Rotary Feeder Drum , Clit, Hanger, beam, gutka, Furnace Nozzle, Clam Etc. And Other Such Parts For LIPI/TAXMACO Boiler As per Different DRG.High Chrome Grade 25 , Casting & Machined Temp. Capacity 15000 C |
| 14 | New Material Supply Basis |
| 15 | On Conversion Basis |
| 16 | C.I Scapper Mixed With pig Iron And Having Standard hardness Dully machined as per Drg.no.MH-66 ( R) |
| 17 | New Material Supply Basis |
| 18 | On Conversion Basis |
| 19 | Grooving of C.I.Scrapper As per DRG. |
| 20 | Centrifused Casted C.I.Coupling For FMG Gear Of KCP Mill OD 1000 MM.PCD 815(18 Holes)9+9,With Machining Complete As per DRG.No.MH-93 |
| 21 | C.I.Motor Cover For Different Type Motor |
| 22 | Mill Setting Bolt & Nut For KCP Mill DRG.No.MH-106 |
| 23 | Mill Setting Bolt & Nut For TAXMACO Mill DRG.No.MH-38 |
| 24 | C.I.Worm And Worm Wheel For Crystilizer As per Drg.BH-39 ( R ) Machined |
| 25 | C.I.Worm And Worm Wheel For vertical Crystilizer No. 2 complete Set As per Drg. Machined |
| 26 | Eccentric Shaft And Eccentric For Hopper as per DRG.No.BH-60 |
| 27 | M.S.Shell For Under Feed Roller As per DRG.MH-95.Length 1525 MM.OD 750MM,Thickness18MM |
| 28 | C.I. Muff Coupling For Cane Unloader As per DRG.No CU-25 |
| 29 | C.I.Gear For Magma Mixture As per DRG.No BH-137.OD 450mm,No.Of Teeth-51.Bore 70mm, Width 63mm |
| 30 | C.I.Brake Drum For S.D.Centrifugal Machine TAXMACO Make Duly Machined |
| 31 | (i) As per DRG.No. BH 81/1 |
| 32 | (ii) As per DRG.No BH-81/2 |
| 33 | C.I.V-Belt Pully Of Cont.Centrifugal Machine Duly machined |
| 34 | C.I.Scale Seat For Juice Weighing Scale Duly Machined and Drilled as per DRG.No.MH-195 |
| 35 | CHIEF ENGINEER |
