|
| 1 | Transformer oil |
| 2 | Lubrication Oil 68 No |
| 3 | Lubrication Oil 10 No |
| 4 | Lubrication Oil 360 No |
| 5 | High Temprature Grease |
| 6 | Disel |
| 7 | Hydraulic Oil |
| 8 | Nut Bolt |
| 9 | Nut Bolt Stainless Steel |
| 10 | Nut Bolt High tension Tower bolt 6 mm to 32 mm dia |
| 11 | Insulation Adesive Tape |
| 12 | Insulation Paper |
| 13 | Insulation Slive 8mm, 10mm,14mm,16mm, 18 mm |
| 14 | Rubber Packing Sheet 3 mm to 6 mm Thickness |
| 15 | Champion Packing Sheet6 mm Thickness |
| 16 | Oil Paper |
| 17 | EN-8 Shaft 20 mm to 70 mm dia. With machining |
| 18 | MS Shaft 20 mm to 70 mm dia. With machining |
| 19 | SS 410Shaft 20 mm to 70 mm dia. With machining |
| 20 | LED LAMP 100 Amp |
| 21 | Vetra 70 mm |
| 22 | welding rod |
| 23 | Areldtite |
| 24 | Backelight Sheet10 mm, 20 mm, 25 mm, 35 mm |
| 25 | Hexaw Blead |
| 26 | Pertolium Jelly |
| 27 | Carbon Removal Spray |
| 28 | Polish Pape \"0 to Rough\" |
| 29 | Lug Pest (Dowell) |
| 30 | Gland Rassi 12 mm to 25 mm |
| 31 | D O Fuse 10 to 40 Amper |
| 32 | H.T .HRC Fuse 30 Amp 33 KV |
| 33 | H.T .HRC Fuse 30 Amp 11 KV |
| 34 | Teflon Tape |
| 35 | Wire Brush |
| 36 | Winding Warnish |
| 37 | Electric Heater |
| 38 | Electric Room Heater |
| 39 | Crimping Slives 10 mm to 20 mm |
| 40 | Lead Vashers for Chlorinator |
| 41 | Chlorine Slives |
| 42 | Chlorine Regulator |
| 43 | Engine Coolent |
| 44 | V Belt as per size |
| 45 | Rubber \"O\" Ring |
| 46 | MS Flat all sizes |
| 47 | MS Chqured plate all size |
| 48 | Oxygen cylender Industial Grade |
| 49 | Providing and supplying and erectingspares Power Contractor 3 pole 75 Amp to 630 Amp |
| 50 | Providing and supplying and erecting spares Copper Lead Wire |
| 51 | Providing and supplying and erecting spares 11 KV Disc Insulator Providing supplying and installing |
| 52 | Providing and supplying and erecting spares 11 KV pin Insulator Providing supplying and installing |
| 53 | Providing and supplying and erectingspares 11 KV Lightning Arrestor Providing supplying and installing |
| 54 | Providing and supplying and erecting spares 11 KV Earthing Set Providing supplying and installing |
| 55 | Providing and supplying and erecting spares 11 KV Air Brack Switch Providing supplying and installing |
| 56 | Providing and supplying and erecting spares 11 KV Gang Oprated Switch Providing supplying and installing |
| 57 | Providing and supplying and erecting spares 33 KV Disc Insulator Providing supplying and installing |
| 58 | Providing and supplying and erecting spares 33KV pin InsulatorProviding supplying and installing |
| 59 | Providing and supplying and erectingspares 33KV Lightning Arrestor Providing supplying and installing |
| 60 | Providing and supplying and erecting spares 33 KV Earthing Set Providing supplying and installing |
| 61 | Providing and supplying and erecting spares 33 KV Air Brack SwitchProviding supplying and installing |
| 62 | Providing and supplying and erectingspares 33 KV Gang Oprated Switch Providing supplying and installing |
| 63 | Providing and supplying and erectingspares 1000 Amper Clamp Meter Heavy |
| 64 | Providing and supplying and erectingspares 1000 Amper Cranck oprated or Digital Oprated Megar Meter |
| 65 | Providing and supplying and erecting spares 1000 Amper Draw Out Aire Circuit Breaker |
| 66 | Providing and supplying and erectingspares 1000 Amper Aire Circuit Breaker |
| 67 | Providing and supplying and erecting following spares 800Amper Draw Out Aire Circuit Breaker |
| 68 | Providing and supplying and erecting following spares 800 Amper Aire Circuit Breaker |
| 69 | Providing and supplying and erecting spares Motor Protection Relay Set |
| 70 | Providing and supplying and erectingspares UV/OV (Under voltage/ Overvoltage) Relay |
| 71 | Providing and supplying and erecting spares Volt Meter Analog type 0 to 600 Volt |
| 72 | Providing and supplying and erectingspares Amper Meter Analog type 0 to 1000 Amps |
| 73 | Voltage Selector Switch |
| 74 | Amper Selector Switch |
| 75 | Panel Mounted \"ON- OFF\" switch |
| 76 | LED Type Pahse Indicator |
| 77 | Kit Kt Fuse 16 Amps To 32 Amps |
| 78 | Capacitor Bank 5 KVA to 75 KVA |
| 79 | Motor Rewinding 1 to 300 Hp Including removing Dismentaling winding and Re-erection |
| 80 | HT Motor Rewinding300 to 600 HpIncluding removing Dismentaling winding and Re-erection |
| 81 | Transformerr Rewinding65 Kva to 1250 Kva Including removing Dismentaling winding and Re-erection |
| 82 | 33 KV Transformerr Rewinding1000 Kva to 2200 Kva Including removing Dismentaling winding and Re-erection |
| 83 | Auto Transformer 30 to 300 Amp Including removing Dismentaling winding and Re-erection |
| 84 | V.C.B. Relay Servicing |
| 85 | Warneshing, Heating, Geasingof 3 HP to 600 Hp Motors Including removing Dismentalingand Re-erection |
| 86 | Glass Fuse 0.5 Mili Amp to 1 Amper |
| 87 | Thermal Overlaod Load 30 to 630 Amper |
| 88 | Providing and supplying and erecting following spares Change Over Switch 30 amp to 1000 Amp |
| 89 | Motor Terminal Plate and Making Lead Connectionand Making Lead ConnectionFor40 Hp |
| 90 | Motor Terminal Plate and Making Lead ConnectionFor50 Hp |
| 91 | Motor Terminal Plate and Making Lead ConnectionFor60 Hp |
| 92 | Motor Terminal Plate and Making Lead ConnectionFor75 Hp |
| 93 | Motor Terminal Plate and Making Lead ConnectionFor90 Hp |
| 94 | Motor Terminal Plate and Making Lead ConnectionFor100 Hp |
| 95 | Motor Terminal Plate and Making Lead ConnectionFor120 Hp |
| 96 | Motor Terminal Plate and Making Lead ConnectionFor125 Hp |
| 97 | Motor Terminal Plate and Making Lead ConnectionFor150 Hp |
| 98 | Motor Terminal Plate and Making Lead ConnectionFor200 Hp |
| 99 | Motor Terminal Plate and Making Lead ConnectionFor215 Hp |
| 100 | Motor Terminal Plate and Making Lead ConnectionFor250 Hp |
| 101 | Motor Terminal Plate and Making Lead ConnectionFor275 Hp |
| 102 | Motor Terminal Plate and Making Lead ConnectionFor300 Hp |
| 103 | Providing and supplying and erecting following spares LED Flood Light Fittings 50,100,150,200 watt |
| 104 | Providing and supplying and erecting following spares LED Bulb 8,10,12,14,20,25 watt |
| 105 | Alluminium Bus Bar Strip |
| 106 | Providing and supplying and erecting following spares 10 to 150 Sqm mm 4 Core Copper Cable |
| 107 | Providing and supplying and erecting following spares 50 to 400 Sqm mm 3.5 Core Alluminium Cable |
| 108 | Providing and supplying and erecting spares 1.5 Sq mm to 5 Sqm mm Copper wire |
| 109 | Providing and supplying and erecting spares Alluminium Lug 10 Sq.mm to 150 Sq. mm |
| 110 | Providing and supplying and erecting spares Copper Lug 10 Sq.mm to 150 Sq. mm |
| 111 | Alluminium Lug 50 Sq.mm to 360 Sq. mm |
| 112 | Heat Shrinkable Insulation Rbber |
| 113 | Timer For ATS Starter |
| 114 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe80 mm CI/DI pipe |
| 115 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 100 mm CI/DI pipe |
| 116 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 150 mm CI/DI pipe |
| 117 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 200 mm CI/DI pipe |
| 118 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 250 mm CI/DI pipe |
| 119 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 300 mm CI/DI pipe |
| 120 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 350 mm CI/DI pipe |
| 121 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 400 mm CI/DI pipe |
| 122 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 450 mm CI/DI pipe |
| 123 | Making Cross Connection On Existing pipe Line By Using Required material forDia of pipe 500 mm CI/DI pipe |
| 124 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 15 mm GI pipe |
| 125 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 25 mm GI pipe |
| 126 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 35 mm GI pipe |
| 127 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 40 mm GI pipe |
| 128 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 50 mm GI pipe |
| 129 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 75 mm GI pipe |
| 130 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 80 mm CI/DI pipe |
| 131 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 100 mm CI/DI pipe |
| 132 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 150 mm CI/DI pipe |
| 133 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 200 mm CI/DI pipe |
| 134 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 250 mm CI/DI pipe |
| 135 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 300 mm CI/DI pipe |
| 136 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 350 mm CI/DI pipe |
| 137 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 400 mm CI/DI pipe |
| 138 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 450 mm CI/DI pipe |
| 139 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 500 mm CI/DI pipe |
| 140 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 600 mm CI/DI pipe |
| 141 | Removing Leackages On Existing pipe Line By Using Required material for Dia of pipe 750 mm CI/DI pipe |
| 142 | Removing Chock up in the Existing pipe Line By Using Required material forDia of pipe 80 mm CI/DI pipe |
| 143 | Removing Chock up in the Existing pipe Line By Using Required material forDia of pipe 100 mm CI/DI pipe |
| 144 | Removing Chock up in the Existing pipe Line By Using Required material forDia of pipe 150 mm CI/DI pipe |
| 145 | Removing Chock up in the Existing pipe Line By Using Required material forDia of pipe 200 mm CI/DI pipe |
| 146 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 100 mm DIK-7pipe |
| 147 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 150 mmDIK-7pipe |
| 148 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 200 mmDIK-7pipe |
| 149 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 250 mmDIK-7pipe |
| 150 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 300 mmDIK-7pipe |
| 151 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 350 mmDIK-7pipe |
| 152 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 400 mmDIK-7pipe |
| 153 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 450 mmDIK-7pipe |
| 154 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 500 mmDIK-7pipe |
| 155 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 600 mmDIK-7pipe |
| 156 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 750 mmDIK-9pipe |
| 157 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of pipe 800 mmDIK-79pipe |
| 158 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 15 mm GI pipe |
| 159 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 25 mm GI pipe |
| 160 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 35 mm GI pipe |
| 161 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 40 mm GI pipe |
| 162 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 50 mm GI pipe |
| 163 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of GI pipe 75 mm GI pipe |
| 164 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 40 mm |
| 165 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 50 mm |
| 166 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 65 mm |
| 167 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 80 mm |
| 168 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 100 mm |
| 169 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 150 mm |
| 170 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 200 mm |
| 171 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 250 mm |
| 172 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 300 mm |
| 173 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 350 mm |
| 174 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 400 mm |
| 175 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 450 mm |
| 176 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 500 mm |
| 177 | Providig Supplying and Lowring laying including excavation in all strataUsing Required material forDia of Valve 600 mm |
| 178 | Providing And Supplying Following Dia GI Special15 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 179 | Providing And Supplying Following Dia GI Special25 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 180 | Providing And Supplying Following Dia GI Special35 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 181 | Providing And Supplying Following Dia GI Special40 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 182 | Providing And Supplying Following Dia GI Special50 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 183 | Providing And Supplying Following Dia GI Special75 mm GI pipe 1. Elbow 2. T 3. Collerü 4. Union 5. H Nipple 6. Bend 900 7. Reduce Elbow |
| 184 | Providig Alum Grade IV |
| 185 | Providig Poly Aluminium Chloride Powder |
| 186 | Providig Blenching Powder 33% Stable Chlorine |
| 187 | Providig Alum Non Ferrous |
| 188 | Providig Soda Lime ASH |
| 189 | Providig Chlorine Tonner 100 kg |
| 190 | Providig Chlorine Tonner 100 kg |
| 191 | Providig Ammonia Testing Solution |
| 192 | Providig O Toloride Sloutions |
| 193 | Providig Mnso4 |
| 194 | Providig CaCl2 |
| 195 | Providig FeCL3 |
| 196 | Providig Phospate Buffer |
| 197 | Providig mgso4 Solution |
| 198 | Providig Alkali Azide |
| 199 | Providig Conc. H2SO4 |
| 200 | Providig Satrch Indicator Soln. |
| 201 | Providig 0.025 N Sodim Thiosulphate |
| 202 | Providig Merciric Sulphate 1 gm |
| 203 | Providig Sulphuric Acid Reagent |
| 204 | Providig 0.025 N Potassium Dichromate |
| 205 | Providig 0.1 NFerrous Ammonium |
| 206 | Providig Providig Glass Beads |
| 207 | Providig Ferroin Indicater |
| 208 | Providig con. HCL |
| 209 | Providig Methyl Orange Indiactor |
| 210 | Providig Buffer Solution |
| 211 | Providig EDTA |
| 212 | Providig Ammonia buffer solution |
| 213 | Providig Erichrome Black T |
| 214 | Providig Satndard CALCIUM Solutin |
| 215 | Providig BOD Inqubetter CAP. 1000 to 200 Lit. |
| 216 | Providig BOD Conical Neck Bottle 300 ml |
| 217 | Providig Burate Stand with adjustibal Clamp |
| 218 | Providig Mesuring cylinders 5ml to 250 ml |
| 219 | Providig Conical Flask 250 ml |
| 220 | Providig air Condenser |
| 221 | Providig Round bottam Flask 1000 ml |
| 222 | Providig COD Digester |
| 223 | Providig Hot Air Oven |
| 224 | Providig Funnel |
| 225 | Providig basicater |
| 226 | Providig weging scale |
| 227 | Providig Turbidity Meter |
| 228 | Providig PH Meter |
| 229 | Providig Dropper |
| 230 | Providig Boro SILICATE Glass |
| 231 | Providig Petri Dish |
| 232 | Providig COD Bottle |
| 233 | Providig Transperent Glass Bottle |
| 234 | Providig PH Paper |
| 235 | Providig JAR TEST APP. |
| 236 | Providig Whatman Filter paper no 42 ash less |
| 237 | Providig Dial Indicater with magnetic stand |
| 238 | Providig Micrometer |
| 239 | Providig vernier caliper |
| 240 | Providig Screw Pitch Gauge |
| 241 | Providig Chlorine Cantser face mask |
| 242 | Providig Hand Gloves |
| 243 | Providig Rubber MAT |
| 244 | Providig andSupplying DE OPEN jaw Fix Spanner 6*50 mm |
| 245 | Providig andSupplying Bi Hexagonal Ring Spanner 6*50 mm |
| 246 | Providig andSupplying Screw Driver Engineering Pattrn 6*300 mm |
| 247 | Providig andSupplying Screw Driver Engineering Pattrn 8*300 mm |
| 248 | Providig andSupplying Screw Driver Engineering Pattrn 5*200 mm |
| 249 | Providig andSupplying Screw Driver Engineering Pattrn 5*300 mm |
| 250 | Providig andSupplying Tool Box 50*30*30 CM |
| 251 | Providig andSupplying Tranguler file 300 mm |
| 252 | Providig andSupplying Half Raound File |
| 253 | Providig andSupplying Chain Pipe Wrench 6,12,18,24 inches |
| 254 | Providig andSupplying Pipe Wrench 6,10,12,14,18,20,24,36,inches |
| 255 | Providig andSupplying Ball Pen Hammer |
| 256 | Providig andSupplying Lug Press Machine (Mechanical & Hydroulic) |
| 257 | Providig andSupplying Bearing Puller 3 leg 8,12,18,22,24 inches |
| 258 | Providig andSupplying 150 MM Cutting Player |
| 259 | Providig andSupplying Chold Chisel |
| 260 | Providig andSupplying Side Cutting Player 200mm |
| 261 | Providig andSupplying Centre Punch175 mm |
| 262 | Providig andSupplying Water Pump Player 259 mm to 40 mm Chrome vanadium |
| 263 | Providig andSupplying Welding Transformer 400 amp / 1 phase /2 phase |
| 264 | Providig andSupplying 15 volt Dry Battery LED Torch |
| 265 | Providig andSupplying Grinding Machine 4\" |
| 266 | Providig andSupplying 4\" Grinding Wheel |
| 267 | Providig andSupplying 4\" Cutting Wheel |
| 268 | Providig andSupplying 4\" Buffing Wheel |
| 269 | Providig andSupplying 4\" Polish Wheel |
| 270 | Providig andSupplying Nylon Rope 12,14,16,18,20 MM |
| 271 | Providing , supplying and errecting Submersible Boaring2\"*100 mm GI CollarFull Threade |
| 272 | Providing , supplying and errecting Submersible Boaring2\" T |
| 273 | Providing , supplying and errecting Submersible Boaring GI Pipe B class 15,20,25,30,32,40,50mm Dia |
| 274 | Providing , supplying and errecting Submersible BoaringBoar Plate 150 mm & 100 MM |
| 275 | Providing , supplying and errecting Submersible BoaringBoar Clamp 1,2\" |
| 276 | Providing , supplying and errecting Submersible Boaring16 Amp 3 pole MCCB |
| 277 | Providing , supplying and errecting Submersible Boaring16 Amp 2 pole MCCB |
| 278 | Providing , supplying and errecting Submersible Boaring16 Amp 3 pole MCCB |
| 279 | Providing , supplying and errecting Submersible Boaring1 phase Cantrol PANEL |
| 280 | Providing , supplying and errecting Submersible BoaringDOL Starter 1 to 10 HP |
| 281 | Providing , supplying and errecting Submersible BoaringRelay 6*10,9*14 Amp |
| 282 | Providing , supplying and errecting Submersible BoaringSarter Coil 1 Ph To 10 Ph |
| 283 | Providing , supplying and errecting Submersible BoaringSarter Condenser2 starting 120 to 150 ,35/50 MFD |
| 284 | Providing , supplying and errecting Submersible BoaringGI Sheet metal Box 2*2 ft |
| 285 | Providing , supplying and errecting Submersible BoaringEarthing Rod |
| 286 | Providing , supplying and errecting Submersible BoaringEARTHING PLATE |
| 287 | Providing , supplying and errecting Submersible BoaringEarthing Wire |
| 288 | Providing , supplying and errecting Submersible BoaringEarthing Chemical Powder |
| 289 | Providing , supplying and errecting Submersible BoaringMarine Plywood 10mm Thick |
| 290 | Providing , supplying and errecting Submersible BoaringAluminium Busbar Strip |
| 291 | Providing , supplying and errecting Submersible BoaringGI Wire |
| 292 | Providing , supplying and errecting Submersible BoaringPVC WIRE Bobin |
| 293 | Providing , supplying and errecting Submersible Boaring4 core 6 mm2 Aluminium Cable |
| 294 | Providing , supplying and errecting Submersible Boaring4 core 10 mm2 Aluminium Cable |
| 295 | Providing , supplying and errecting Submersible Boaring3 core / 4 core 2.5 sq mm Copper CABLE |
| 296 | Removing ,Dismantling, Repairing,Assembling,Bringing, and test and trial Submersible Pumpset of 100 m dia & 150 mm dia |
| 297 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29328E |
| 298 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29326E |
| 299 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings7322 |
| 300 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings7220BECB |
| 301 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings7316BEP |
| 302 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29324E |
| 303 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29324B |
| 304 | Supplying ProvidinG Removing Old Bearing andErecting new BearingBearings7220BEP |
| 305 | Supplying ProvidinG Removing Old Bearing andErecting new BearingBearings29330B |
| 306 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6320 |
| 307 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6318 |
| 308 | Supplying ProvidinG Removing Old Bearing andErecting new BearingBearings6311 |
| 309 | Supplying ProvidinG Removing Old Bearing andErecting new BearingBearings6211 |
| 310 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6316C3 |
| 311 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6309 2Z |
| 312 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6308 2Z |
| 313 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6310 2Z |
| 314 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings6312 2Z |
| 315 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29422 E1 XL |
| 316 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearingsNU 327 |
| 317 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearingsQJ 320 |
| 318 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearings29327 E |
| 319 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearingsPackers Plate 1 to 10 mm Thick |
| 320 | Supplying ProvidinG Removing Old Bearing and Erecting new BearingBearingsPacker sims 0.5 to 3 mm thick |
| 321 | Providing and maching as per size Thorden Material Bush 10*100*110(Id*od*length) |
| 322 | Providing Rubber Bush 10*100*110(Id*od*length) |
| 323 | Rubber Spider |
| 324 | Lovejoy Coupling All Size |
| 325 | Spring Washers |
| 326 | Bushed Pin Type Coupling |
| 327 | Flexibel Coupling ALL size |
| 328 | Universal Coupling all size |
| 329 | Providing , supplying and errecting for HANDLE |
| 330 | Providing , supplying and errecting for HANDLE AXLE |
| 331 | Providing , supplying and errecting for Baering NO 6204 * 2 no |
| 332 | Providing , supplying and errecting for Chain 1 no |
| 333 | Providing , supplying and errecting for Water Outlet |
| 334 | Providing , supplying and errecting for HAND PUMP SPARE Body |
| 335 | Providing , supplying and errecting 1.1/4 GI Pipe |
| 336 | Providing , supplying and errecting1.1/2 Collar GI |
| 337 | Providing , supplying and errecting12 mmm Rod |
| 338 | Providing , supplying and errecting 12 mm Hex Coupler |
| 339 | Providing , supplying and errecting 12 mm Cylender Rod |
| 340 | Providing , supplying and errecting 12 mm Cylender Body |
| 341 | Providing , supplying and errecting India mark 2 cylender |
| 342 | Providing , supplying and errecting Copper Assembly Cylender |
| 343 | Providing , supplying and errecting Bucket Washer Assembly |
| 344 | Providing , supplying and errecting Upper NRV |
| 345 | Providing , supplying and errecting Upper washer |
| 346 | Providing , supplying and errecting Uppr assembly gun metal |
| 347 | Providing , supplying and errecting Lower assembly gun metal |
| 348 | Providing , supplying and errecting Lower Valve Washer in rubber |
| 349 | Providing , supplying and errecting Housing Washer 3 no I rubber |
| 350 | Providing , supplying and errecting GI Body Plate |
| 351 | Providing , supplying and errecting Nut Bolts for Hand Pump |
| 352 | Removing, re erection and test and trial of india mark 1,2,3 Handpump |
| 353 | providing electrician |
| 354 | providing pump operator |
| 355 | providing fitter |
| 356 | providing plumber |
| 357 | providing and constructing B.B. masonary, circular manhole with concentric cone 1.2 m dia. At bottom anad 0.5 m dia at top |
| 358 | providing and constructing B.B. masonary, circular manhole with concentric cone 1.2 m dia. At bottom anad 0.5 m dia at top(rebete for every descrease in 50 cm) |
| 359 | providing and constructing B.B. masonary, circular manhole with concentric cone 1.5 m dia. At bottom anad 0.5 m dia at top |
| 360 | providing and constructing B.B. masonary, circular manhole with concentric cone 1.5 m dia. At bottom anad 0.5 m dia at top(rebete for every descrease in 50 cm) |
| 361 | Providing and Fixing SFRCframe and cover 540 mm dia |
| 362 | Providing and Fixing SFRCframe and cover 560 mm dia |
| 363 | Providing and Fixing SFRCframe and cover 90x45 cm dia |
| 364 | Providing and Fixing SFRCframe and cover 90x60 cm dia |
| 365 | Providing and Fixing SFRCframe and cover 60x60 cm dia |
| 366 | Providing and Fixing SFRCframe and cover 60x45 cm dia |
| 367 | poen timbering in trenches of depth more than 1.5 m for shoring and strutting |
| 368 | Removing,supplying erewcting of dewatering pump set of 5 HP capacity |
| 369 | Providing water tanker of 3000 lit capacity for removing chockup |
| 370 | Providing and supplying labour and roding machineries for removing chock up |