Dismantling Work A.��� Brick / Block Masonry Inclusive Of Its Finishing From Both Side. 2 2 Dismantling Work B.��� Existing Windows With Frame And Grill Approximate Size Of The Windows Including Grill 2.15 X 1.15 Meter. 3 3 Dismantling Work C. Disamntling Of Rcc Members Like Slab, Beams, Linttle, Etc.Of Any Grade, Size And At Any Level Including Cutting Of The Steel Reinforcement, Etc. Complete. 4 4 Excavation In Foundation Excavation Of Foundation Of All Types Of Soil / Rock, Plinth Protection Finishing, Soiling, Pcc Etc. For The Foundation Of The New Lift Well Up To Approx. 1.20 Meter Depth 5 5 Rubble Stone Soling Prepare Existing Excavated Soil Surface With Levelling, Compaction With Water And Remove Any Loose Material Etc. To Receive The Stone Soling 6 6 Plain Cement Concrete In Foundation Providing, Mixing And Laying In Position Atd Directed Location Plain Cement Concrete 1:2:4 ( 1 Cement: 2 Aggregates: 4 M-Sand ) Of Required Thickness Using Appropriate Size Aggregate 7 7 Lift Pit Waterproofing Providing And Laying Kotah Stone, In Proper Line And Level For Horizontal Surface, Using Stone Of Appx. Size 600Mm X 600Mm And About 22-25Mm Thickness Laid Over Cement Mortar Bedding 8 8 Rcc M25 ( 1:1:2 ) In Foundation And Super Structure A. In Sub-Structure Works Upto Plinth Level / Lift Pit Top 9 9 Rcc M25 ( 1:1:2 ) In Foundation And Super Structure B. In Super Structure Works 10 10 Tor Steel Reinforcement Providing, Cutting, Bending, Binding With Gi Wire And Placing In Proper Position In Proper Line & Level Of Required Diameter ( 8Mm To 20 Mm Dia ) Approved Brand Tor Reinforced Steel 11 11 Light Weight Block Masonry Providing And Constructing With 150 Mm Thick Single Light Weight Approved Make Block Masonry Wall Between Vertical M.S Steel Structure Columns 12 12 Light Weight Block Masonry Do As Above But With Minimum 230Mm Brick Masonry For Making Up The Damaged Wall Matching With The Existing Wall Surface Using Ready Mixed Cement Mortar Of Approved Make, Scaffolding, Forming The Key Joints, Curing, Etc. 13 13 Structural Fabrication Work Providing, Fabricating And Erecting In Position As Per The Drawings Or As Directed By Banks Engineer Structural Frame Work Made Out Of Approved Make Channels, Angles, Flats, I- Beams, Plates, Etc 14 14 Aluminium Composite Panel ( Acp ) Sheet Designing, Supplying, Providing And Fixing In Position Minimum 4Mm Thick Fire Rated ( Minimum 2 Hrs ) Of Approved Make And Colour Acp 15 15 Aluminium Composite Panel ( Acp ) Sheet Providing And Fixing In Proper Line, Level And Plumb Aluminium Frame Work Of Sections As Per The Required Deisgn Using Sections Of Approved Make. 16 16 Expansion Joint Providing And Fixing In Position Approved Make 1St Quality 25 Mm Thick Shalitex Board And Polysulphide Sealant In The Expansion Joint Between Existing Building And New Lift Well To Make The Joint Water Proof. 17 17 Wooden Flush Door With Granite Frame I ) Providing And Fixing 16 To18mm Thick Machine Cut Mirror Polished� Jet Black Granite Stone In Two Pices Of Minimum 100 Mm & 180Mm Wide For Soffit And Jambs Of The Door 18 18 Fixed M S Grill In Windows Providing, Fabricating And Fixing In Position M.S Grill Fabricate With 25 X 6 Mm M S Flat As Per Drawing Enclosed 19 19 Granite Window / Ventilator Jambs Providing And Fixing 300 Mm Total Wide Jambs, Soffit And Sill For Windows / Ventilators In Step Pattern 20 20 Granite Lift Jambs Framing Providing And Fixing 15-16 Mm Thick Machine Cut One Side Mirror Polished Approved Colour, Design & Pattern Granite Stone As Lift Jambs, Soffit And Sill In Single Piece Of Minimum Width Of 200Mm 21 21 Aluminium Fixed Glass Windows Providing And Fixing Fixed Type Fully Glazed Two Equal Panel Anodized Approved Aluminium Make Windows Shall Be Fabricate In Position By Using Partition Section 50.80 X 25.40 X 1.50 Mm Thick Approximate Weight 0.651 Kg / M For Sides, Top & Bottom 22 22 Aluminium Ventilator Providing, Cutting, Fabricating And Fixing In Position Two Panel Fully Glazed Top Fixed And Bottom Central Pivoted Openable Ventilator Shutters Made Out With Anodized Approved Make Aluminium Section As Per Following Specifications: 23 23 Solid Waste Management Permission Carrying Out All The Liasioning Work With Statutory Bodies For Obtaining Swm Plan Approval For The Work Including Obtaining And Submitting Performance Bank Guarantee Of An Amount Of Rs 5.0 Lakh 24 24 Ready Mixed Plaster Providing And Applying Ready Mixed Plaster On, Columns, Rcc Walls, Etc. Of Minimum Thickness Of 12Mm Or As To Match With Surrounding Surface With Sand Face Finish 25 25 Brick Work In Step Blocks Providing And Constructing, In Proper Line, Level And Plumb, Step Blocks Of Size As Directed By Banks Engineer Using Locally Available Bricks 26 26 Chequerred Tiles And Kotah Stone For Threads And Risers Of The Steps Providing And Laying Chequerred Tiles In Threads Of Approved Make And Shade And One Side Mirror Polished Kotah Stone 27 27 Internal And External Painting Providing And Applying Of Two Or More Coats Of Exterior Grade Apex Paint Of Approved Make And Shade To Be Applied On The Plasetr Surface 28 28 Terrace Waterproofing Carefully Treating The Existing Cracks In The Slab, If Any, By Opening The Crack By Making Mechanically V Groove To The Required Depth 29 29 Cgst Enter Cgst 30 30 Sgst Enter Sgst
