Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-06-2022 | boq replaced | BOQ | 28-06-2022 |
| Sl. No. | Item Description |
| 1 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Low back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience moulded polyurethane foam 40mm thick having density 45kg/m³ with mouse jute fabric tapestry 1mm thick and 300 GSM and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 30mm thick having density 45kg/m³ with mouse jute fabric tapestry 1mm thick and 300 GSM with contoured lumbar support. The seat and back shall be individual with different plywood joint with HR steel sheet. The seat & back covered with polypropalene cover and the armrest shall be used PP arm completely joint with seat. The chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 445±10 mm(W)X430±10 mm(D) and back size shall be 465±10 mm(H) from seat & overall height = 800±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 2 | Providing and supplying High back chair. The seat shall be made of 15mm thick hot pressed plywood padded with HR polyurethane foam 50mm thick having density 40kg/m³ and the back shall be made up of double layered mouldedhot pressed plywood (12+6)mm thick padded with HR polyurethane foam 40mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be masde by keeping the natural curvature of the spine. The seat and back shall be arrested together with powder coasted HR steel spine and the armrest shall be used fixed PP arm completely joint with seat. Foe seating durability the chair shall have swivel tilt 360 degree revolving mechanism with single position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift. The pedestal should have five legged injection moulded in black nylon 30% glass filled having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded in black nylon 30% glass filled. The seat size shall be 485±10 mm(W) X 485±10 mm(D) and back size shall be 695±10 mm(H) from seat & overall height = 1120±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 3 | Supplying & Placing Conference table in completely knock down conditions that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix, dowels, pins and brackets. The worktop shall have the combination of PLPB board and MDF board. The main top should be made up of back to back 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and the base top shall be made up of 25mm thick Medium density fibre-board with deco matt finish. The table top profile shall be boat like shape with round corners. The edges edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius and the base top shall be with half round post form with grooves. Single sided Flip-up box should be enclosed at table top that houses video, audio, data and power connection discretely. Wire carrier shall be provided below the table top for power connection made of 0.8mm thick high yield strength CRCA sheet of grade \"D\" confirming to IS:513. The table shall be supported on particle board base gable end. The end wall of the table on the side and mid shall be topped by gable end. It should be made up of 36mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 4 | Supplying and placing Counter Chair. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with blue crape fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of 12mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 50mm thick having density 40kg/m³ with blue crape fabric tapestry 0.6mm thick and 235 GSM. The seat and back shall be fixed with plywood and HR steel sheet and the armrest shall be used PP arm completely joint with seat. 360 degree revolving mechanism. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. Footrest shall be provided of MS chrome plated round pipe of Dia 20mm with 1.5mm thick having pitch circle Dia 465mm. The Pedestal shall be made up of MS CRCA powder coated 50µ~60µ DFT having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movement at load tested capacity 1100 Kg with BIFMA standard. The seat size shall be 435±10 mm (D) X 460±10 mm (W) and back size shall be 385±10 mm (W) X 445±10 mm (Ht) from seat. Overall height shall be = 1135±10 mm, overall depth = 650±10 mm & overall width = 560±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 5 | Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be SS tube arm provided with shiny chrome finish. The complete structure shall be upholstered with maroon leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall be supported by loop leg pipe frame of SS 202 grade having cross-section area 60mm X 10mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 1510±10 mm(W), seat height = 430±10 mm, overall width = 1770±10 mm, overall depth = 760±10 mm & overall height = 750±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 6 | Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 30mm thick Pre-laminated particle board of grade II of IS 12823. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower shelf shall be made up of 18mm thick Pre-laminated particle board. The under structure shall consist of SS 202 grade shiny chrome finish pipe frame having cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 7 | Supplying & placing center table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made up of 30mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower top of the table shall be made up of 18mm thick Pre-laminated particle board. The under structure shall have SS 202 grade with shiny chrome finish pipe frame with cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 8 | Main top counter top 25mm thick plpb and rest all 18mm thick. With 1 no. mobile drawer unit. green pro certified |
| 9 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged metal insert CRCA covered with natural wood having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(D) X 530±10 mm(W) and back size shall be 530±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 705±10 mm & overall width = 675±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 10 | Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine with lumbar support which helps to provide full back support. The chair shall be supplied with aluminium arm with cushion top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged MS CRCA chrome plated having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 475±10 mm(D) X 550±10 mm(W) and back size shall be 530±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1010±10 mm, overall depth = 660±10 mm & overall width = 640±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 11 | Supplying & Placing executive table with credenza unit and pedestal in completely knock down conditions with an overall size (W2400 X D1200 X H750mm that is to be assembled at site. The worktop shall be 43mm thick having the combination of 18mm Pre-laminated particle board with approved laminate and shade as top and 25mm Medium density fibre-board as base top. The worktop shall have the size 2400mm X 1200mm having the profile in rectangle shape and the edges (top) shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius and deco paint with half round post form edges along with grooves (base top). The top shall be supported on 4 nos. of SS pipe strips having size 230mm X 60mm X 15mm. The table shall be clad with 48mm thick modesty panel which provide structural support for the table. It should be 48mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding and shall be cladded with SS pipe frame on sides having cross-section area 95mm X 25mm. The understructure shall consist of SS 202 grade loop leg having cross-section area 95mm X 25mm. There shall be buffers provided to avoid to avoid scratches on the floor as well as uneven surfacing. Pedestal shall be provided with an overall size 400mm X 500mm X 660mm. It should be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. It shall have 3 nos. of drawer having same size and operated with SS handle and easily close & open with the assistance of roller and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. The pedestal shall be mounted on injection moulded nylon castor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 12 | Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The sofa shall be supported on MS powder coated pipe frame having size 40mm X 20mm. The under structure shall consist of MS powder coated round leg with upper dia. 38mm and lower dia. 30mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 570±10 mm(D) X 1660±10 mm(W), seat height = 425±10 mm, overall width = 2020±10 mm, overall depth = 750±10 mm & overall height = 680±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 13 | Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The sofa shall be supported on MS powder coated pipe frame having size 40mm X 20mm. The under structure shall consist of MS powder coated round leg with upper dia. 38mm and lower dia. 30mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 570±10 mm(D) X 1100±10 mm(W), seat height = 425±10 mm, overall width = 1490±10 mm, overall depth = 750±10 mm & overall height = 680±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 14 | Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 12mm thick toughened glass. The profile shall be in rectangle shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 1155mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 202 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 15 | Supplying & placing center table with an overall size 600mm X 600mm X 450mm. The top shall be made up of 12mm thick toughened glass. The profile shall be in square shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 555mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 202 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 16 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made up of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (32 & 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with polypropylene arm with cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged MS CRCA powder coated with 40-60µ thick having pitch circle dia. 600 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1140±10 mm, overall depth/width = 700±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 17 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Low back chair. The seat shall be made of double layered (12+6)mm thick hot pressed plywood with HR polyurethane foam 40mm thick having density 40kg/m³ upholstered with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made ofhot pressedplywood 12mm thick with HR softy polyurethane foam 12mm thick having density 23kg/m³ upholstered with fabric tapestry 0.6mm thick and 235 GSM. There shall be L type ply used. The armrest shall be used PP arm mounted on pipe frame completely joint with seat and back. For seating durability the chair shall have swivel tilt revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healty seating user can adjust seat height up to 120mm with BIFMA standard class-3 gas-lift to suite tham using the lever under the seat. The pedestal should have five legged MS/CRCA powder coated with 40-50µ (DFT) thick having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castor. The castor of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 460±10 mm(W)X505±10 mm(D) and back size shall be 400±10 mm(H) from seat & overall height = 850±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 18 | Supplying & Placing Modular table in completely knock down conditions with an overall size 2450mm X 2200mm X 750mm that is to be assembled at site. The work top shall have the size 2100mm X 1200mm made up of 50mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Extruded Aluminium profile shall be inserted in the side edges of the table on both side. The table top shall be supported on MS powder coated pipe frame having cross-section area 50mm X 25mm with 1.6mm thick. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 2200mm X 600mm X 641mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, top etc. It shall have 3 drawer, 1 shutter and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380..The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 19 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing High back chair. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine as well as head support. Moulded PP arm shall be used with cushion and leatherite upholstery. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suite them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged made up of injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors, the castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 515±10mm(W) X 490±10mm(D) and back size shall be 510±10 (W) X 650±10mm(H) from seat & overall height = 1110±10mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 20 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Mid back chair. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine. Moulded PP arm shall be used with cushion and leatherite upholstery. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suite them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged made up of injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors, the castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 515±10mm(W) X 490±10mm(D) and back size shall be 510±10 (W) X 510±10mm(H) from seat & overall height = 945±10mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 21 | Supplying & Placing Modular table in completely knock down conditions with an overall size 2450mm X 2200mm X 750mm that is to be assembled at site. The work top shall have the size 2100mm X 1200mm made up of 50mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top shall be 50mm thick on edges, after 100mm from edges it should be 25mm thick. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Extruded Aluminium profile shall be inserted in the side edges of the table on both side. The table top shall be supported on MS powder coated pipe frame having cross-section area 50mm X 25mm with 1.6mm thick. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 2200mm X 600mm X 641mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, top etc. It shall have 3 drawer, 1 shutter and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 22 | Providing and supplying 3 seater visitor chair with 2 arms. The seat and back shall be made up of reinforced PU foam with MS perforated sheet. The seat mounted on MS powder coated rectangular cross beam having cross-section area 60mm X 60mm with 2mm thick fitted with polypropylene end caps on both side. The arm and leg shall be made up of pressure diecast aluminium. there shall be leveller shoe provided at the bottom with metal insert. The individual seat size shall be 515±10 mm(W) X 467±10 mm(D), Back size shall be 515±10 mm(W) X 510mm±10 mm(H) from seat, Overall depth shall be 680±10 mm, overall height shall be 860±10 mm and overall width shall be 1640 ±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 23 | Supplying and placing mid back chair with ergonomic design and GREENGUARD Certified. The seat and back shall be made of 15mm thick hot pressed commercial plywood and plastic inner respectively padded with high resilience moulded polyurethane foam 40mm thick having density 40kg/m³ in seat and 25mm thick having density 32Kg/m³ in back. The same shall be upholsted with fabric tapestry 1mm thick and 300GSM. The back and base of the chair shall be supplied with injection moulded PP/ABS cover. The seat and back shall be arrested together with 50-60µ dry film thick powder coated HR steel spine covered with plastic bellow. The armrest shall be used one piece injection moulded polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castor. The castor of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFA X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 465±10 mm (D) X 480±10 mm (W) and back size shall be 435±10 mm (W) X 560±10 mm (Ht) from seat. Overall height shall be = 1025±10 mm, overall width = 615±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 24 | Supplying & placing computer desk of size 800mm(W) X 500mm(D) X 750mm(H). It should have work top made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit theboard panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top board shall be supported on gable end at one end and fixed CPU unit at another end. Key-board trey shall be provided 18mm thick pre-laminated particle board with an overall size 740mm X 400mm. The trey shall be operated by sliding channel runs on nylon roller to smooth operation. Open spaces shall be provided at one. Complete understructure made in 18mm thick Pre-laminated particle board with appropriate edge banding. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certificaton. The board used should meet international standards of quality and safety, Indian standard IS12823 grade II should meet long time loadbending, screw–withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 25 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing High back chair. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine as well as head support. Moulded PP arm shall be used with cushion and leatherite upholstery. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suite them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged made up of injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors, the castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 515±10mm(W) X 490±10mm(D) and back size shall be 510±10 (W) X 650±10mm(H) from seat & overall height = 1110±10mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 26 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Mid back chair. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine. Moulded PP arm shall be used with cushion and leatherite upholstery. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suite them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged made up of injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors, the castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 515±10mm(W) X 490±10mm(D) and back size shall be 510±10 (W) X 510±10mm(H) from seat & overall height = 945±10mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 27 | Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and having density 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam thick having density 32Kg/m³. SS strip shall be provided on front of the arm having length 515mm with cross-section area 14mm X 4mm. The structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have shiny chrome finish SS leg with height 100mm and 10mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 500±10 mm(D) X 1015±10 mm(W), seat height = 430±10 mm, overall width = 1160±10 mm, overall depth = 750±10 mm & overall height = 700±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 28 | Supplying & placing corner table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size the size 40mm X 20mm with 1.6mm thick. One nos. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 29 | Supplying & placing corner table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size the size 40mm X 20mm with 1.6mm thick. One nos. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 30 | Supplying & Placing Modular table in completely knock down conditions with an overall size 1500mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall have the size 1500mm X 750mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The side top shall have the size 900mm X 450mm X 750mm with 25mm thick Pre-laminated particle board. The table top profile shall be in rectangle shape with one side round and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board. The trey shall be operated on keyboard channel. The table top and side top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the bottom to avoid scratches on the floor. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided. It should be made up of 18mm thick particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 31 | Providing and supplying student chair with desklet. The seat and back shall be made up of hot pressed commercial plywood and one piece injection moulded 20% glass filled polypropylene padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The same shall be upholstered with fabric tapestry. The seat and back shall be arrested together with metal pipe frame. The chair shall be supplied with foldable writing pad 10mm thick made up of polypropylene shell mounted on metal pipe frame having cross-section area 30X15mm 1.6mm thick. The structure shall be supported on MS/CRCA pipe frame having cross-section area 30X15X1.6mm and the under-structure shall consist of four legs made up of CRCA reducing pipe having dia. 25.4mm with 1.6mm thick. The complete steel structure shall be epoxy powder coated to 40-60µ dry film thickness. The seat size shall be 470±10 mm(W) X 465±10 mm(D), back size shall be 450±10 mm(W) X 385±10 mm(H) from seat. Overall height shall be 790±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 32 | Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 202 grade leg having Dia. 38mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 540±10 mm(D) X 1550±10 mm(W), seat height = 430±10 mm, overall width = 1950±10 mm, overall depth = 760±10 mm & overall height = 750±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 33 | Supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS leg with shiny chrome finish having Dia. 38mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 540±10 mm(D) X 490±10 mm(W), seat height = 430±10 mm, overall width = 890±10 mm, overall depth = 760±10 mm & overall height = 750±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 34 | Corner Table, 12mm Thick PLPB, Lower Shelf 12mm PLPB, Chrome Plated Pipe Frame With Chrome Castor, green pro certified |
| 35 | Supplying and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 2000±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 2600±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 36 | Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 571 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 1330±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 1930±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 37 | Providing and supplying centre table with an overall size 1200mm X 1200mm X 410mm. The top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. The MDF top should have decorative finish with approved veneer and PU polish accordingly. The understructure shall consist of 4 nos. of MS sheet gold leg with 6mm thick.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 38 | Providing and supplying corner table with an overall size 500mm X 500mm X 510mm. The top shall be made up of Medium Density Fibre-board with approved veneer laminate and PU polish. It should be supplied with cold rolled closed annealed square pipe frame gold finish having cross-section area 25mm X 25mm with 1.6mm thick.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 39 | Supplying & Placing Conference table in completely knock down conditions with an overall size Dia. 1200mm X 750mm that is to be assembled at site. The table top shall have the size 1200mm Dia. made up of 36mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 36mm thick Pre-laminated particle board and profile shall be in linear shape and sealed with appropriate PVC edge banding. There shall be buffers provided at the base to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 40 | Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of metal bright bar upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with cushion base lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used injection moulded polypropylene loop arm completely joint with seat. For seating durability the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 460±10 mm(W) X 455±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 990±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 41 | Supplying & Placing executive table in completely knock down conditions with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick particle board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided with an overall size 468mm X 284mm. The CPU unit shall be made up of 18mm thick Pre-laminated particle board and mounted on nylon castors. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 42 | Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of hot pressed plywood padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide lumbar support as well as head support. The armrest shall be used cushion arm with leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia. 640mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lba load. The seat size shall be 490±10 mm(W) X 480±10 mm(D) and back size shall be 475±10 mm(W) X 755±10 mm(H) from seat & overall height = 1200±10 mm, overall depth/width =720±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 43 | Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of hot pressed plywood padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The armrest shall be used cushion arm with leatherite covering top.For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia. 640mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lba load. The seat size shall be 490±10 mm(W) X 470±10 mm(D) and back size shall be 490±10 mm(W) X 540±10 mm(H) from seat & overall height = 970±10 mm, overall depth/width = 720±10 mm. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 44 | Supplying & placing storage unit . It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four fixed shelf. 2 nos. of door shutters shall be provided for opening and closing the storage operated with concealed crank hinge and SS handle. There shall be buffers provided at the bottom to avoid scratches on the floor. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 45 | Supplying and Placing King Size bed having overall Size: 2065mm X 1870mm X 1130mm/430mm(H).Bed head is made up of 25mm thick medium density fibreboard (MDF) with suade finish and membrane design.Prelaminated particle board used of size 18 mm thick with PVC edge banding of 2 mm thick at upper side and 0.8 mm thick at lower side.Leg side is made up of 25mm thick MDF with suade finish.18 mm thick prelaminated particle board used in bed seat. Storage unit is divided into two parts one is manual openable on head side and other is sliding openable on leg side with the assistance of 25mm, twin wheel nylon castors in 6 nos. MS black powder coated of 1.5mm thick frame provided for strength. 18mm thick prelaminated particle board is used as storage wall. three storage unit. 25mm thick PLPB is used for support of storage unit on left and right side.18 mm thick prelaminated particle board is used base.Bed shoe provided of nylon baseto avoid the scratched on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 46 | Cabinet18mm thick plpb board with plpb frame glass shutter and ms sheet fixed on top |
| 47 | Supplying & Placing conference table in completely knock down conditions with an overall size 3000mm X 1200mm X 750mm that is to be assembled at site. The table top shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The worktop shall be supplied with flapper box which have several components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical management and carrying the wire horizontally. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. The table shall be supported over SS pipe leg of 202 grade. It shall have cross-section area 80mm X 20mm. There shall be buffers provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 48 | Supplying & Placing workstation table in completely knock down conditionsthat is to be assembled at site. The worktop shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in sharing base rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported on particle board base gable end. The end wall of the top on the side shall be topped by gable end. It should be made up of 25mm thick Pre-laminated particle board and the profile shall be in linear shape with appropriate PVC edge banding. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in front side of user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) provided at front of the user. Laminated bottom tile shall be situated below the work top. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Fixed pedestal shall be provided with an overall size 400mm X 450mm X 725mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 4 nos. of drawer having same size. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 470mm X 286mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 1The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 49 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Low back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience moulded polyurethane foam 40mm thick having density 45kg/m³ with mouse jute fabric tapestry 1mm thick and 300 GSM and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 30mm thick having density 45kg/m³ with mouse jute fabric tapestry 1mm thick and 300 GSM with contoured lumbar support. The seat and back shall be individual with different plywood joint with HR steel sheet. The seat & back covered with polypropalene cover and the armrest shall be used PP arm completely joint with seat. The chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 445±10 mm(W)X430±10 mm(D) and back size shall be 465±10 mm(H) from seat & overall height = 800±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 50 | Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. The foam shall be extra thick on edges in curvilinear shape for extra comfort. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide lumbar support as well as head support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used chrome plated arm with cushion leatherite top completely joint with seat. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged CRCA chrome plated with nylon edge cover and 5 star centre cover having pitch circle Dia. 700mm fitted with 5 nos. twin wheel castors with. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lba load. The seat size shall be 570±10 mm(W) X 490±10 mm(D) and back size shall be 570±10 mm(W) X 775±10 mm(H) from seat & overall height = 1220±10 mm, overall depth = 700±10 mm & overall width = 715±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . . |
| 51 | Supplying and Placing King Size bed having overall Size: 2060mm X 1565mm X 905 mm/400mm(H).Bed head is made up of Prelaminated particle board is used of size 36mm thick i.e 18+18 dual board with PVC edge banding of 2mm thick.Leg side is made up of Prelaminated particle board is used of size 36mm thick i.e 18+18 dual board with PVC edge banding of 2mm thick. Left and right side of the bed is made up of Prelaminated particle board used of size 18 mm thick with PVC edge banding of 2 mm thick at upper side and 0.8 mm thick at lower side.18 mm thick prelaminated particle board is used in bed seat. Bed seat is subdivided into two parts for manual openable storage unit at both side i.e left and right. Storage unit is divided into two parts one is manual openable . A MS CRCA black powder coated frame of 1.5 mm thick is used for strength of bed. 25 mm pralaminated particle board is used to divide the storage unit and 25 mm thick PLPB is used to support the bed seat at both side i.e left and right. Two storage unit with four manual openable ports. 25mm thick PLPB is used for support of storage unit on left and right side.18 mm thick prelaminated particle board is used base.Bed shoe provided of nylon baseto avoid the scratched on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 52 | Supplying & placing storage unit . It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four fixed shelf. 2 nos. of door shutters shall be provided for opening and closing the storage operated with concealed crank hinge and SS handle. There shall be buffers provided at the bottom to avoid scratches on the floor. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 53 | Supplying & Placing executive table in completely knock down conditions with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick particle board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided with an overall size 468mm X 284mm. The CPU unit shall be made up of 18mm thick Pre-laminated particle board and mounted on nylon castors. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 54 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 570±10 mm(W) and back size shall be 550±10 mm(W) X 670±10 mm(H) from seat. Overall height shall be = 1130±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 55 | Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustmen. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(D) X 550±10 mm(W) and back size shall be 550±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1020±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm..The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 56 | Supplying and Placing King Size bed having overall Size: 2060mm X 1565mm X 905 mm/400mm(H).Bed head is made up of Prelaminated particle board is used of size 36mm thick i.e 18+18 dual board with PVC edge banding of 2mm thick.Leg side is made up of Prelaminated particle board is used of size 36mm thick i.e 18+18 dual board with PVC edge banding of 2mm thick. Left and right side of the bed is made up of Prelaminated particle board used of size 18 mm thick with PVC edge banding of 2 mm thick at upper side and 0.8 mm thick at lower side.18 mm thick prelaminated particle board is used in bed seat. Bed seat is subdivided into two parts for manual openable storage unit at both side i.e left and right. Storage unit is divided into two parts one is manual openable . A MS CRCA black powder coated frame of 1.5 mm thick is used for strength of bed. 25 mm pralaminated particle board is used to divide the storage unit and 25 mm thick PLPB is used to support the bed seat at both side i.e left and right. Two storage unit with four manual openable ports. 25mm thick PLPB is used for support of storage unit on left and right side.18 mm thick prelaminated particle board is used base.Bed shoe provided of nylon baseto avoid the scratched on the floor.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 57 | Supplying & placing storage unit . It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four fixed shelf. 2 nos. of door shutters shall be provided for opening and closing the storage operated with concealed crank hinge and SS handle. There shall be buffers provided at the bottom to avoid scratches on the floor. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 58 | Supplying & Placing executive table in completely knock down conditions with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick particle board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided with an overall size 468mm X 284mm. The CPU unit shall be made up of 18mm thick Pre-laminated particle board and mounted on nylon castors. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 59 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 570±10 mm(W) and back size shall be 550±10 mm(W) X 670±10 mm(H) from seat. Overall height shall be = 1130±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 60 | Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustmen. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(D) X 550±10 mm(W) and back size shall be 550±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1020±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 61 | Supplying and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 2000±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 2600±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 62 | Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 571 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 1330±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 1930±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 63 | Providing and supplying centre table with an overall size 1200mm X 1200mm X 410mm. The top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. The MDF top should have decorative finish with approved veneer and PU polish accordingly. The understructure shall consist of 4 nos. of MS sheet gold leg with 6mm thick. The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 64 | Providing and supplying corner table with an overall size 500mm X 500mm X 510mm. The top shall be made up of Medium Density Fibre-board with approved veneer laminat.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 65 | Supplying & Placing Conference table in completely knock down conditions with an overall size Dia. 1200mm X 750mm that is to be assembled at site. The table top shall have the size 1200mm Dia. made up of 36mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 36mm thick Pre-laminated particle board and profile shall be in linear shape and sealed with appropriate PVC edge banding. There shall be buffers provided at the base to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
| 66 | Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of metal bright bar upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with cushion base lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used injection moulded polypropylene loop arm completely joint with seat. For seating durability the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 460±10 mm(W) X 455±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 990±10 mm.The Participating brand must have an ISO 9001:2015, ISO -14001:2015,ISO- 45001:2018 from Nabcb accredited laboratories and shall have BIFMA membership and AIOTA certification. GreenGuard certificate by UL of USAEnvironment for chair, workstation, table and storage minimum one product for each category . |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
