Providing Road Furnishing Item In Various Road Under Jurisdiction Of R & B Sub Division, Dhrangadhra-1 Providing and fixing Hectometer as per I.R.C. type design including painting, lettering etc. complete. (ii) Fixing in C.C. 1:5:10 Nos. 2 Providing and fixing guard stone as per I.R.C. type design including white washing etc. complete.(ii) Fixing in C.C. 1:5:10 Nos. 3 Providing and fixing ordinary Kilometer stone of approved hard stone as per I.R.C. type design including painting and lettering etc. complete (For N.H., S.H. and M.D.R.) Nos. 4 Providing and fixing 5th Kilometer stone of approved hard stone as per I.R.C. type design including painting and lettering etc. complete (For N.H., S.H. and M.D.R.) Nos. 5 Providing and fixing indicator stone of approved stone as per I.R.C. type design including white washing etc. complete. (ii) Fixing in C.C. 1:5:10 No. 6 Providing and fixing flood gauge post of 75 x 75 x 8mm angle 2.25 mt. long fixing in head wall including painting and lettering with primer coat as per Drawing & engineer-in-charge No. 7 Providing & erecting a W metal double beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm. above road / ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5mm spaced 1.5m. centre to centre, 1.8m. high, 1.1m. below ground / road level, all steel parts and fitments to conform to IS : 1367 and IS : 1364, Metal Beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330mm long and 3mm ACM type reflactive 100 mm wide and 4.5m long, Type 4, class B high intensity grade sheeting as per IRC 67- 2012 including labour complete as per Clause 810 (Bridge Portion) Rmt. 8 Providing & erecting a W metal double beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm. above road / ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5mm spaced 1.5m. centre to centre, 1.8m. high, 1.1m. below ground / road level, all steel parts and fitments to conform to IS : 1367 and IS : 1364, Metal Beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5mm, 330mm long and 3mm ACM type reflactive 100 mm wide and 4.5m long, Type 4, class B high intensity grade sheeting as per IRC 67- 2012 including labour complete as per Clause 810 (Approach Portion) Rmt. 9(A) Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. Over 10cm in width Sqmt. 9(B) Upto 10 cm in width Sqmt. 10(A) Painting and lettering with enamel paint 3- coats etc complete. (i) Ordinary K.M. Stone for N.H. S.H. and M.D.R. Nos. 10(B) (iii) Fifth K.M. Stone Nos. 10(C) (iv) Hectometer stone. Nos. 10(D) (v) Road sign board. Nos. 10(E) (vi) Village name board. Nos. 10(F) (vii) Junction board. Nos. 11 Oil Painting to C.D. Work Detail Board with 3-Coat Oil Paint including Board Pole Paint with Black / White Patta etc. complete Nos. Providing Road Furnishing Item in Various Road under Jurisdiction of R & B Sub Division, Dhrangadhra ANNUAL RATES Rate 2 Item Item of Works Unit No. In Rs. in Figure Words Rs. Ps. (1) (2) (3) (4) (5) Rate 12 Numbering the C.D. work with approved paint including all materials for painting etc. complete. Nos. 13 Oil Painting to Sub Structure Flood Guage Marking as directed by Engineer-inCharge etc. complete Rmt. 14 Painting white black patta with enamelled paint 3-Coats for guard stone for embankment on road site etc. Nos. 15 C.C. Divider / Curb wall / Protective wall painting with oil paint (Two coat) of approved brand and manufacture on undecorated wall surface to give an even shade including brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. Sqmt. 16 Finishing wall with water proofing cement paint of on wall surfaces (Three coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. Sqmt. 17 Painting Three coats excluding priming coat on pipe three row railing surface with enemal paint including brushing polishing to shade an even shade including cleaning the dirt, dust and other foreign matter. Rmt. 18 White washing with lime on wall surface (Three coats) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. Sqmt. 19 Providing White Wash to Guard Stone / Indicator Stone as directed by Engineer-inCharge. Sqmt. 20 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two years. Sqmt. 21 Providing White Wash / Geru on Tree No. 22 Providing & fixing Rubberized Speed Breakers (Imported) Black & Yellow Colour Combination for Greater visbility, Rubber as a base material helps in making better grip on the road, Moisture & temperature resistant, Instant installation with the application of expoxy and bolts, Modular design Provides easy Installation, No need to paint again & again due to pre colour, hence painting cost is NIL, Reflectors & Glass Elements provides better night vision, Provides much better comfort for passenger in the vehicle. The design on the Speed Humps makes easy drainage of rain water, any length of Speed Humes is possible as the design / section are modular Middle Part Length Width Height Reflector Bolt Holes 500mm 380mm 50mm 4 Pcs Glass ball 4-Holes End Length Width Height Reflector Bolt Holes 250mm 350mm 50mm None 2-Holes23 Paint on Existing Steel Guard railing ( Crash Barrier) having post angle size channel of 150mm x 75mm at 2.00 mt./Center to Center and bracket channel size 150mm x 75mm by 12mm high tensile Bolt with W Shape type guard rail 3mm thick including remove dirt and any kind of other foreign material before guard painting as per clause No. 800 of M.O.S.T. as per directed engineer-in-charge specification and Drawing. Rmt. 24 Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with Micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 Ð DO III Dt 11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The body of the marker should having finger grip for easy and accurate placement and application with epoxy / bituminous Adhesive as recommended by the manufacturer of the marker. The color of the marker should be as per the IRC 35-2015 and as directed by Engineer-in-charge. No. 25 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and The color of the marker should be as per the IRC 35-2015 and as directed by Engineer-in-charge. No. 26 Median Marker :Providing and Fixing of Flexible Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with property of flexibility to provide high durability. The dimension of Flexible Median Marker should not exceed 18.4 cm in height(including shank height),12.5 Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The body structure shall be rounded at all its corners and edges. The plastic used for molding the Flexible Median Marker should survive impact load of 5kg continuously for 750 times at room temperature. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The Median Marker shall have flame like shaped body with, fluorescent yellow color retro-reflective sheeting of size not less than 90 Cm square, with fully reflective micro prismatic cube corners as its retro-reflective elements as per IRC 67 2012 and ASTM D4956-09 type XI specifications reflectivity values. The retro-reflective sheeting shall be one or both sides of the Flexible Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The Flexible Median Marker shall be fixed by a combination of epoxy adhesive and grouting as recommended by manufacturer and Engineer in charge. No. 4 Item Item of Works Unit No. In Rs. in Figure Words Rs. Ps. (1) (2) (3) (4) (5) Rate 27 AFP (Aluminum Backed Flexible Prismatic): Providing and fixing Aluminum backed flexible prismatic sheeting , consisting of yellow/black colored flexible prismatic sheet with non-mettalic prismatic lens as retro reflective elements and confirming to ASTM D4946 Type VI specifications for reboundable retro reflective sheeting. This flexible prismatic sheeting shall be of 30cm width and laminated at the back with a 50 micron Aluminum (Al) foil with pressure sensitive adhesive and liner. Further, this flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black color in a continuous roll format. The AFP sheeting, with the liner removed, shall be applied with a neoprene contact adhesive with a Polychloroprene as base, viscosity of 200-450 cps and solid content of 20-30%. Once applied, the edges of the product shall be sealed all around with a two-part epoxy based structural adhesive and shall be extremely resistant to peel-off. A test report from institutes like ARAI/CRRI confirming to above mentioned flexibility and ASTM-D4956-09 TypeVI retroreflectivity performance of the flexible prismatic sheeting used in AFP shall be submitted as directed by Engineer-In-Charge. Sq.Meter 28 Standard Delineator: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. height of sheeting should be minimum 150mm whereas width of sheeting should not be less than 75mm (should be placed every alternative 15cm). The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer No. 5 Item Item of Works Unit No. In Rs. in Figure Words Rs. Ps. (1) (2) (3) (4) (5) Rate 29 Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer in charge+ No. 30 Providing and laying of Plastirib - T or equivalent raised profile edge line marking ( audible warning ) with hot applied thermoplastic road marking compound according to IRC 35 - 2015, Clause 7.7, with 2mm thick base coat layer above that ribs profile size of lenght 40mm X width 140mm X Height 6 mm thick ( Total 8 m thick ) at the distance of 250 mm between two ribs including reflectorizing glass beads @ 250 gm/ sq.mt area. The maximum width of raised profile should be 150 mm. The thickness of 8 mm profile should be exclusive of surface applied glass beads. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on edge lines. The profile marking should be mark basic line and raise line at a time simultaneously. Sq.Meter 31 Providing and laying of Plastirib - T or equivalent raised profile edge line marking ( audible warning ) with hot applied thermoplastic road marking compound according to IRC 35 - 2015, Clause 7.7, with 2mm thick base coat layer above that ribs profile size of lenght 40mm X width 140mm X Height 6 mm thick ( Total 8 m thick ) at the distance of 500 mm between two ribs including reflectorizing glass beads @ 250 gm/ sq.mt area. The minimum and maximum width of raised profile should be 150 mm. The thickness of 8 mm profile should be exclusive of surface applied glass beads. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on edge lines. The profile marking should be mark basic line and raise line at a time simultaneously. Sq.Meter 6 Item Item of Works Unit No. In Rs. in Figure Words Rs. Ps. (1) (2) (3) (4) (5) Rate 32 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP (Aluminum composite Panel); size 60x50 cm as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting No. 33 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of35x35x3mm; painted with bestquality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-B Type-4 Retro Reflective sheeting No. 34 Providing and fixing retro Reflective Prismatic grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm. Descaling and degreasing the board as per requirement using epoxyprimer epoxy paint and carrying retro reflactive process by screen painting as directed etc. complete including transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc. complete as per I.R.C 67-2012 design. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class -C Type-11 retro reflective sheeting Sq.Mtr 7 Item Item of Works Unit No. In Rs. in Figure Words Rs. Ps. (1) (2) (3) (4) (5) Rate 35 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting No. 36 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting No. 37 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting
