Bids Are Invited For 1 Auto guarage 1 Providing and fixing precoated iron profile sheet (size shape and pitch of corrugation as approved by Engineeri-in-charge ) 0.05mm (plus 0.05 percent) total coated thickness with zink coating 120 grams per sqm as per IS-277, in 240mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as directed by Engineer-in-charge.The sheet shall be fixed using self drilling/ self tapping screw of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontal/vertical or curved surface, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 2 Auto guarage 2 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (plus 0.05 percent) total cated thickness, Zink coating 120 grams per sqm as per IS-277 IN 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete.Ridge plain (500-600mm),Barge board(up to 300 mm) 3 Auto guarage 3 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (plus 0.05 percent) total cated thickness, Zink coating 120 grams per sqm as per IS-277 IN 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete.Ridge plain (500-600mm) 4 Auto guarage 4 Structural steel work in single section, fixed with or without connecting plate, including cutting,hoisting, fixinf in position and applying apriming coat of approved steel primer all complete. 5 Auto guarage 5 Providing and applying two or more coats of(All around) exterior acrylic emulsion paint of approved brand and manufacturer to exterior surface of cocrete, masonry,plastered surface etc. at all elevations including preparation of surfaces by scraping and completeincluding cost of all labour tools and tackles etc. complete as per drawing, tools and tackies etc.complete as per drawings, specifications and directon of the Engineer-in charge 6 Auto guarage 6 Dismentling roofing including ridge,hips,valley and gutters etc. and stacking the material within 50 meters lead of Asbestos sheet 7 Auto guarage 7 Providing and fixing on wall face unplasticed Rigid PVC rain water pipes conforming toIS-13592 Type A, including jointing with seal ring conforming to IS-5382, laving 10 mm gap for tharmal expansion,( i ) Singke socketed pipes. 8 Mines office 1 Earth work in excavation in foundation trenches. Pits or drains not exceeding 1.5 Mtr. In depth, 2Mtr in which as well as 10 Sq.m on plan including clearing of bushes and shrubs from ground level including trimming dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. including dewatering getting out the excavated soil and disposal of surplus excavated soil within a lead of 100 m including cost of labour, tools and tackles etc. as per drawing, specifications and directions of the Engineer-in-charge.a) Ordinary/dense soil mixed with gravels / rock fragments/ loose waste. 9 Mines office 2 Earth work in back filling with available eath including wateing and campaction at all elevations around foundations, wall, wells, tunnels, pits, culverts trenches, road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer-in-charge with selected spoils within a lead of 100 Mtr including cost of labours, tools and tackles etc. 10 Mines office 3 Supply, mix place in position compact & cure cement concrete 1-3-6 (1 Cement, 3 coarse sand, 6 graded stone aggregate 20mm nominal size) below foundations walls, wells, pits, trenches etc. as per specifications, drawings and directions of the Engineer-in-charge including cost of all materials, labours tools and tackles etc. but excluding cost of cement,centering and shuttering. 11 Mines office 4 Supply , place in position compact & cure including testing of concrete specifications,drawing and direction and direction of the engineer with nominal mix 1-1.5-3 (1 cement,1.5 coarse sand ,3 graded stone aggregate 20 mm nominal size ) including cost of all materials, labours but excluding cost of shuttring,cement & reinforcement. 12 Mines office 5 Providing dismantling and removing the form work of approved quality including from suspended floors, roofs, landing, balconies and acess platform etc scffolding including required staging and supporting etc and necesarry rendering of concrete surface after expouser at all elevations for all types of work with plywood shuttering including cost of all materials, labours, tools and tackles etc. completer as per specifictions, drawing & directions of EIC. 13 Mines office 6 Supply, bend bind and place the reinforcement on all types of RCC work at all elevations,including cleaning straightening, cutting,bending and binding with 18 SWG annealed wire or with welding such as tack, lap but etc wwith approved electrodes, providing concrete cover blocks, pins,chains,nail,supports of reeinforement etc inclusive of all maerials, labour,tools and tackles etc. complete as er drawings, specifications and directions of the Engineer-in -charge but excluding cost of reinforcement steel with chains only. Mild steel/HYSD bars 14 Mines office 7 Supply and laying in position brick work with designation 75 bricks ( compreeive strength not less than 75 kg/Sq.cm) in foundationand plinth at various elevations in cement coarse sand mortar (1-6) including mixing mortar, laying bricks, raking joints curing etc complete with all materials and labour but excluding cost of cement as per drawings and specifications. 15 Mines office 8 Supply and laying in position brick work with designation 75 bricks ( compreeive strength not less than 75 kg/Sq.cm) in Super structure at various elevations in cement-coarse sand mortar(1-6) including mixing mortar,laying bricks,raking joints,curing etc complete with all materials and, labour,tools and tackles etc but excluding cost of cement. complete as per drawings, specifications. 16 Mines office 9 6mm cement plaster of mix 1-3 (1 cement, 3 fine sand) for ceiling etc, including scarping the surface with wire brush, including of all material, labour, tools and tackles etc completer but excluding cost of cement. 17 Mines office 10 12 mm thick (minimum) plastering with 1 - 4 (1 cement, 4 fine sand) to walls, channels in roof and other structure at various elevations including demolishing old plaster (if require),scraping the surface with wire brush, mixing,laying,finishing,curing and necessary scaffolding work complete as as per drawings, specifications and instructions of the Engineer with all materials, labour, tools and tackles etc. complete but excluding cost of cement. 18 Mines office 11 15 mm thick (minimum) plastering on the rough sde of single or half brick work with 1 - 4 cement mortor (1 cement, 4 fine sand) to walls, channels in roof and other structure at various elevations including demolishing old plaster (if require),scraping the surface with wire brush, mixing,laying,finishing,curing and necessary scaffolding work complete as as per drawings, specifications and instructions of the Engineer with all materials, labour, tools and tackles etc. complete but excluding cost of cement. 19 Mines office 12 Providing and applying plaster of pairs putty of 2mm thickness over plastered surfce to prepare the surface even and smooth complete rubbing by sand paper No.240 of rquired as per direction of EIC 20 Mines office 13 Providing and applyingtwo or more coat of cement primer of approved brand and manufacure on wall surface with cement primer as per the direction of EIC. om new/old work. 21 Mines office 14 Providing and applying wall painting with plastic emulsion paint of approved brand and amnufacture to give an even shade two or more coats on new/old work as per direction of EIC 22 Mines office 15 Providing and fixing 30 mm thick flush door shutter non-decorative tyoe, core block board construction withframe of 1st class hard wood and well frame of 1st class hard wood and well matched commericial 3 ply veneering with vertical grains or cross bands and fce veneers on both fces of shutters as per the direction of E.I.C. 23 Mines office 16 Painting with approved brand polyurethane emnamel paint (Jenson & Nicholson make) in all shade to give an even shade including cost ofall materials and labour on New work (two ormore coats) as per direction of EIC 24 Mines office 17 Providing and applying two or more coats of (All around) exterior acrylic emulsion paint of approved brand and manufacture to exterior surfaces of concrete, masonary,plastered surfaces etc. at all elevations including preparation of surfaces by scraping and complete including cost of all albour, tools and tackles etc. complete as per drawings, specifications and directions of the engineer-in-charge ,Application of paint should be made as per manufactures specifications). 25 Mines office 18 Providing and laying vittified floor tiles in 50 x 50 cm ( thickness to be specified by the manufacture) with water absorptions less than 0.08 percent and conforming to IS - 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement , 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete as per the direction of EIC. Make- Kejaria / Somani 26 Mines office 19 Providing and fixing steel glazed windows and ventilators of standard rolled steel sections joints mitred and welded with 15x3 mm lugs, 10cm long, embeded in mortar (1 cement, 1.5 coarse sand , 3 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes 4 mm tick frosted/ clear glass with glazzing clips and special metal sash putty of approved, fan light catch or pivots etc as required and to the satishfication of the Engineer-in-charge and including a coat of primer etc but excluding cost of cement includig cost of all materials, labours , tools and tackles etc. complete as per specification and direction of the E.I.C. 27 Mines office 20 Making plinth protection 50 mm thick of cement concrete 1-3-6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 12 mm nominal size) over 75 mm (compacted thickness) bed of dry brick ballast (40 mm nominal size) mixed with surkhi/moorum in the ration of (6-1), well rammed and consolidated and fininshing the top smoooth including cost of all materials, labours, tools and tackles etc as per direction of the Engineer-in-charge but excluding cost of cement. 28 Mines office 21 Taking delivery of raw materials (from owners stores), fabricate, transport and erect structural steel work of T. angle palte, pipe joist etc. including all necessary connectio materials and connections ( including weilding and bolting, nuts, washer,gussets etc complete) with 2 coats of 1st quality synthetics enamel paint over a coat of approved steel priner (ready mixed paint conforming to IS-2074) as per drawings, specifications and directions of the Engineer-in-charge including cost of all albour,tolls and tackles etc. 29 Mines office 22 Providing & fixing renewing on wall face unplasticised Rigid PVC rain water pipes conforming to IS - 13592 Type A including jointingwith seal ring conforming to IS - 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes with 110mm diameter as per the direction of EIC. 30 Mines office 23 Brick edge floorig with bricks of class designation 75 including cement slurry etc. complete in cement mortar with F.P.S bricks 1-6 (1 cement, 6 coarse sand) 31 Mines office 24 Providing and fixing sand iron of self cleansing design with sand cast iron screwed down or hinged grafting with or without vent arm, complete, including cost of cutting and making good the walls and floors with 100 mm inlet and 100 mm outlet. 32 Mines office 25 Providing and fixing white viterous china wash basin with C.I/M brackets,15 mm C. P brass pillar taps,32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls. Flat back wash basin 550 x 400 mm with single 15 mm C.P brass pillar tap. 33 Mines office 26 Providing and fixing 600 x 450 mm beveled ege mirror of superior glass ( of approved quality) complete with 6 mm thick hard board ground fixed cleates with C.P brass screws and washers. Make-MODI GLASS 34 Mines office 27 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings as per the direction of Engineer-in-charge. 35 Mines office 28 Taking delivery of G.I pipe (from owners stores) laying & fixing with medium grade (internal & external) complete with G.I fittings lik bend. (T) union etc clamps including making chase in walls and making good the wall after housig G.I pipes or trenching and refillings as necessary, apply a coat of Zinis chromate promer for cancealed pipes and two coats of synthetic enamel paint over a coat of zinic chromate primer for exposed pipes below G.I to be painted two coats of anti corrosive bitumens paints of approved brand and manufacture and necessary hydrostatic tests etc complete as per specification and the direction of the Engineer-in-charge G.I pipes and fitting shall be supplied by dept. free of cost). for a) 25mm nominal bore 36 Mines office 29 Taking delivery of G.I pipe (from owners stores) laying & fixing with medium grade (internal & external) complete with G.I fittings lik bend. (T) union etc clamps including making chase in walls and making good the wall after housig G.I pipes or trenching and refillings as necessary, apply a coat of Zinis chromate promer for cancealed pipes and two coats of synthetic enamel paint over a coat of zinic chromate primer for exposed pipes below G.I to be painted two coats of anti corrosive bitumens paints of approved brand and manufacture and necessary hydrostatic tests etc complete as per specification and the direction of the Engineer-in-charge G.I pipes and fitting shall be supplied by dept. free of cost). for b) 50mm nominal bore 37 Mines office 30 Making plinth protection 50 mm thick of cement concrete 1-3-6 (1 cement, 3 coarse sand ,6 stone aggregate 12 mm nominal size) over 75 mm ( compacted thickness) bed of dry brick ballast (40 mm nominal size) mixed with surkhi/moorm in the ratio of (6-1) well rammed and consolidated and finishing the top smooth with near cement including cost of all materials, labour , tools and tackles etc. as per direction Engineer in-charge but excluding cost of cement. 38 Mines office 31 Providing and applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on steel galvanised iron/steel works as per direction of the EIC 39 Mines office 32 Providing and applying priming coat with ready mixed red oxide zinic chromate primer of approved brand and amnufacture on steel galvanised iron/steel works as per direction of the EIC 40 Mines office 33 Randam Rubble with hard stone in foundation and plinth including levelling up with cement concrete 1-6 -12 (1 cement,6 coarse sand,12 graded stone aggregate 20 mm nominal size ) at plinth level with cement mortar 1-6 (1 cement ,6 coarse sand)as per EIC ,but excluding cement. 41 Mines office 34 a) Providing applying painting with oil type wild oreservature if aorived brand and manufacture New work (two or more coats as per direction of EIC. 42 Mines office 35 b) Providing applying fininshing with Epoxy paint (two or more coats) at all location prepared and applied as per manufactures specification including appropriate priming coat,preparation pf surface etc. complete on steel work. -- Renovation And Repairing Of Auto Garage And Mines Office At Total Quantity : 3649
