Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments And Construction Of Pump House / Panel Room / Operator Room At Various Water Supply Schemes Of Jal Shakti ( Phe ) Mechanical Division South Awantipora-2 Supply, awantipora-Jammu And Kashmir

Supply, Installation, Testing And Commissioning Of Electro-Mechanical Equipments And Construction Of Pump House / Panel Room / Operator Room At Various Water Supply Schemes Of Jal Shakti ( Phe ) Mechanical Division South Awantipora-2 Supply, Installation, Testing & Commissioning Ofnon Clogpumping Unit As Per Is 5600 At Raw Water Stage. Pump: - Type Of Pump :Non –Clogopen Wellsubmersible Vertical Pump Solid Handling Capacity: 20Mm ( Minimum ) Quality Of Water:Raw Waterto Be Handled Meterial Of Construction:Pump Casing: Cast Ironimpeller : Stainless Steelpump Shaft: Stainless Steelmotor Body: Cast Ironsealing :Dual Mech. Seal The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: -Type : Squirrel Cage 3-Phase Induction Motor Rating : Suitable For Above Parameter Method Of Starting: Star – Delta.Frequency : 50Hz + 3%Voltage: 415± 6 %, -15% Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbdrating:- 7.5 H.P. 3 Rating:- 25H.P 4 Supply, Installation, Testing & Commissioning Of 15 Hp Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelimpeller:Impeller Is Of The Enclosed Or Semi – Enclosed Type And Properly Balanced.Enclosed Impellers Equipped With Seal Rings On Their Hubs. Coupling:A Suitable Coupling Arrangement Provided With Pump Set.Non Return Valve:- Non Return Valve Of The Suitable Size Provided Above The Pump Discharge Case.Motor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbd 5 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size 100 Mm Pn 1.6Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd 6 . Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbdsize: 100Mmpn: 1.6 / 16 7 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:-= 01 Nocurrent Rating = 100 Amp.C ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 100 Ae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 20 Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 20-32 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 D Oftechnical Annexure Of Sbd 8 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva, 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 200 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 26 Of Technical Anexure Of Sbd 9 Providing, Fitting, Testing And Commissioning Of 40 Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Rest Oftechnical Specification As Per Cluase 45Of Technical Anexure Of Sbd 10 Removal Of Choked Filter Media From 5000 / 6000 Gph Pressure Filter Vessel. The Job Includes All Loads And Lifts, Disposal Of Choked Media To Dumping Site Outside The Premises Of The Plant Within A Lead Of 5 Km. The Vessel Needs To Be Cleaned Properly And Dried Before Laying Of Fresh Media. 11 Providing And Layingof Filter Media Of Specific Size And Grade ( Preferably From Sindh Nallah Ganderbal ) To Be Laid In 5000 / 6000 Gph Pressure Vesselduly Washed , Free From Dust , Dirt , Loom And Any Other Inorganic Materialor Suspension .The Job Includes Carriage Of Filtermedia From Ganderbalto Site Including Allall Loads And Liftsrequired On The Site Condition. The Media Is To Be Lad In Different Layers Of Specific Size And Grade From Bottom To Top Over The Filter Bed Plate. The Bottom Layer Is To Be Laid Without Tilling / Damaging The Pressure Nozzles 12 Providing And Fitting Of 12 Mm Dia. Fine Threaded Pvc Nozzles Auxiliary Type To Be Fitted On Filter Bed Plate Of Pressure Vessel. 13 Providing And Fitting Of 29 Inch. Dia. Rubber Washers / Gaskets For Manhole And Inspection Chamber And Opening Of Pressure Filter Vessel. 14 Providing And Fitting Of 3”X5 / 8” Nuts And Bolts. 15 Painting With Synthetic Enamel Paint Two Or More Coats Of Approved Brand And Bor Pressure Clarifier Pressure Filter Vessel, Fittings And Complete Piping After Cleaning Of Dirt By Kerosene Oil And Application Of Steel Primer Of Specific Grade. 16 P / I / T / C Of Horizontal Monoblock Pumping Equipment Of Following Parameters;A ) Discharge :-6000Gph, ) Head: 30 Meters.C ) Speed: 1440 Rpmthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts 17 P / I / T / C Of Backwash Pumping Equipment Of Following Parametersdischarge-16Lpshp-5, Head Range 6-15Mtr 18 P / I / T / C Of Air Scavenging / Blower Unit Of Following Parameterscapacity: -50 Cfm, Pressure: -5Ps10, Speed: -1450 Rpm Motor As Per Requirment 19 Providing, Fabrication And Fitting Of Welded Ms Wire Mesh ( 0.50 Sq. Inch And 1.40Mm Wire Dia. For Bird Screening To The Cgi Pressure Filter House. 20 Replacement Of 25 Mm Dia. -03 No’S ( Ball Valves-Reputed Make ) The Job Includes Providing And Fitting Of Nuts And Bolts And Washers With Allied Mechanical Works. The Job Includes Providing, Fitting Of25mm Dia.Gi-6 Mtrs With Necessary Fittings As Per Requirement. 21 Replacement Of 80 Mm Diadi Gate Valves 22 Replacement Of 65 Mm Butterfly Valves 23 P / I / T / Of5 H.P. Dol 24 Providing , Fitting And Testing Of 25 Mm Gate Valve. The Job Includes Providing, Fitting Of25mm Dia.Gi-6 Mtrs With Necessary Fittings As Per Requirement. 25 Replacement Of 80 Mm Dia Cast Iron Diaphragm Valves By Way Of Including Fresh Di Gate / Butterfly Valves With Pressure Rating Of Pn16 26 P / F / Welding Of 80 Mm Flanges To The Existing Piping System 27 Providing And Fitting Of, 50 Mm Nrv 28 P / F / Welding Of 50 Mm Flanges To The Existing Piping System After Cutting The Damaged Ones. 29 Replacement Of Agitator In Alum Solution Holding Tank Fabricated Out Of Wetted Parts In Stainlessspeed 20-30 Intermediate Bearing Type Twin Blades Free Standing Type 30 Providing And Fitting Of Dozing Pumps Todoze Required Quantity Of Alum / Chlorine In The System .The Capacity Of The Dozing Units Shall Be 12-20 Lph Capacity With All Accessories 31 Providing And Fitting Of Pressure Gauges With Adopters To Replace Damaged Ones These Pressure Gauges Should Be In The Range Of 0-50 Kgf / Cm / Sg And Be Reputed Make. 32 Providing & Fitting Of Lighting Points In 1.5 Mm Sq. Multi Strand Pvc Wire As Conductor To Be Laid / Carried In Pvc Channel / Conduit As Per Site Requirement. The Job Also Includes Providing And Fitting Of 5 Amp. Switch Button / Angle Holders To Be Fitted With 15 Watt Ledinside The Pump House. 33 Providing & Fitting Of Heating Points In 2.5 Sq. Multi Stand Conductorto Be Laid & Carried In Pvc Channel / Conduit As Per Site Requirement. The Job Includes Providing And Fitting Of 16 Amp. Switch Socket Combine 34 Supply, Installation, Errection Of9 Mtrs Long St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 35 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 36 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 37 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing, Station Type . 38 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative, Creepagedistance 320 Mm 39 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 40 Painting Of Poles Red Oxide 41 Painting Of Poles Aluminum Paint 42 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 43 P / I Of Earthing Station For Substation, Lt Panel, And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia, Length :2000 Mmback Fill Compound :30 Kg 44 Providing And Fitting Of Three / Single-Core, Copper Pvc Insulated Cable, Xlpe Armoured Conforming To Is: 7089 Part 1St For Internal Connections Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Single Core Pvc Insulated 25Sqmm Coper Wire 45 ( Part B ) Pump House Of Wss Padgampora Dangerpora / Zadipora ( Adv. Cost Rs. 6, 55, 289 / - ) 46 Earth Work In Bulk Excavation By Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan ) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soil. 47 Providing And Laying Of Stone Soling ( Dully Hand Packed ) On Horizontal Level. 48 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 49 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 50 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 51 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 52 Columns, Pillars, Piers, Abutments, Posts And Struts. 53 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 54 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 55 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 56 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting , Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. ( Hot Finished Welded Type Tubes ) 57 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.Welded 58 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X1.25 Mm M.S. Laths With 1.25 Mm Thick Top Cover 59 Providing And Fixing Ball Bearing For Rolling Shutters. 60 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 61 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 62 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. 4 Mm Thick Glass Pane ( Weighing Not Less Than 10 Kg / Sqm ) 63 P / F Of Tower Bolts, Handles, Locking System Etc Of Approved Make With Isi Mark 64 Carriage Of Different Materials From Different Sources To Dumping Site Of Work By Mechanical Transport Including Loading, Unloading, Stacking Etc:Cement, Steel For An Average Lead Of 15 Km 65 Sand& Agg For An Average Lead Of 15Km. 66 Stone Solingfor An Average Lead Of 15Km. 67 Pipes Upto 100 Mm Dia G.Ifor An Average Lead Of 15 Km 68 02. ( Part A ) Wss Shiganpora ( Adv. Cost: Rs. 12, 03, 279 / - ) 69 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under:Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelmotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Rating: 10 Hpmanufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbd 70 Fabrication, Providing, Fitting And Lowering Of 65Mm Diameter B Class ( Medium Class ) Column Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia L. Production Well / Dug Wel Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-05 And Pn 16 To These Pipes And Welding Of Flanges In Two Layers To Make The Flanged Joint Strong And Leak Proof. The Pipe Of 10 Ft Length Is To Be Weld On Both Sides With Flanges Using Welding Rod Of Reputed Make. The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints Of Column Pipes. The Job Further Includes Cutting Of 2 No. Rectangular Cable Slots In Each Flange. 71 Fabrication, Providing And Fitting Of 65 Mm Size Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. ( 02 Pair ) 72 Fabrication, Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Of80 Mm Diameter Class-C, G.I Pipe, 1 M Lengthand Flanged On Both Ends Andto Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 05 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 73 Providing And Fitting Of 300Mm In Length 80Mm Dia Gireducerflanged On Both Sides, Flange Conforming To Table-05 ( Pn16 ) To Be Fitted With The Column Pipe / Delivery Manifold Of Submersible Pumping Unit To Join Rising-Main And Column Pipe / Delivery Manifold. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes From Inside And Outside Of Pipe To Form Strong Welding Joint. 74 Fabrication, Providing And Fitting Of 80Mm Dia Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I C-Class Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. 75 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductile Iron, Wedge With Fully Vulcanized Epdmrubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible Forburied Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsrest Specification As Per Cluase 12 Of Sbd. Size: Dn80pn:1.6 / 16 76 Providing And Fitting Of Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdmrubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13 Of Sbd. Size: 80Mmpn: 1.6 / 16 77 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 78 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 79 Providing And Laying Of Soling Stone 80 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With 1: 2 : 4 ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) . 81 Painting Of The 2 No. Gantry And Plate Form Of Wellusing One Coat Of Red Oxide Metal Primer And Two Coats Of Enamel Paintof Different Shades 82 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features Capacity=2 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M Detailed Techinical Specification As Per Cluase 24 Of Sbd 83 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 84 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 85 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 86 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing, Station Type . 87 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative, Creepagedistance 320 Mm 88 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 0.05 Acsr ( Galvanised Steel Reinforced. 89 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 & Fitted With Accessories As Under:Rating = 10 Hp Rest Specifications As Per Cluase - 43-Bof Sbd 90 Providing, Fitting, Testing And Commissioning Of 40 Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Rest Oftechnical Specification As Per Cluase 45Of Technical Anexure Of Sbd 91 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 50 Sqmm, 3.5Core 92 Providing And Fitting Of 3-Core Flat 10 Sq.Mm Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. 93 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size :80 Mm Dia, Length :2000 Mmback Fill Compound :30 Kg 94 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 95 Supply, Installation, Testing & Commissioning Of 1000 Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 4Mm2 Cu ( 25 Mtr ) Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 96 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of:Providing Of Tool Kit Consists Of Following Items Rest Specifications As Per Clause- 56 Of Sbd 97 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 98 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 99 Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Srest Specifications As Per Clause -57 Of Sbd 100 Electrification Of Pump House By Way Of P / F Of:- Lighting Points In 1.0 Sq.Mm Multistrand Pvc Chanel / Condut.The Job Incl. P / F Of 5 Amp. Switch, Angle / Button Holder, 5 Watt Led Lamp With Necessary Fixtures ( 06 Jobs ) . Heating Points In 2.5 Sq.Mm Multistrand Pvc Insulated Copper Conductor To Be Laid / Carried In Pvc Channel / Condut.The Job Includes P / F Of 16 Amp.Ss Combine ( 04 Jobs ) . 5 Pin Socket Points In 1.5 Sq.Mm Multistrand Pvc Insulated Copper Conductor To Be Laid / Carried In Pvc Channel / Conduit. ( 04 Jobs ) .Cealing Fan C / W Regulator Switch, Wiring In1.5 Sq.Mm Multistrand Pvc Insulated Copper Conductor To Be Laid / Carried In Pvc Channel / Conduit And Necessary Fixtures ( 02 Jobs ) .Distribution Board Sp &N ( Regal Grey ) With 01 No Incomming And 8 Way Outgoing, Fitted With Mini McbC Series 6Amp.-04 No For Lighting Points And2 / 3 Pin Socket Points And Fans, 10 Amp-01 No For Flood Lights, 16 Amp-01 No For Heating Points, 36 Amp.Mcb ( Mains ) As Per Is Standard.The Fittings Shall Be Modular Type. 101 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 102 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 103 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 104 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size: 6’×1’6” = 9 Sft 105 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site.Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 106 ( Part B ) Pump House Of Wss Shiganpora ( Adv. Cost Rs. 19, 24, 620 / - ) 107 Earth Work In Excavation Over Areas Exceeding 30 Cm And Upto 1.5 M In Depth 1.5 M In Width As Well As 10 Sqm On Plan Inculding Disposal Of Excavated Soil Upto1mt From Cutting Edge. 108 Extra For Earth Work For Every Additional Lift Of 1.5 M Or Part Thereof 109 Providing And Laying Of Dry Stones Soling Tightly Hand Packed. 110 Provding And Laying Of 1:4:8 Nominal Mix Cement Concrete. 111 R.R Masonary With Quarry Stone Laid In 1:6 Cm 112 R.R Masonary With Quarry Stone Laid In 1:6 Dry 113 Providing And Laying Of 50 Mm Thick Dp Band Over Stone Work In 1:2:4 Nominal Mix 114 Brick Work With Ommon Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 115 Extra Over Brick In Super Structure Up To Floor V Level. 116 Providing And Fixing Of Wooden Chowkat In First Class Kail Wood. 117 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows First Class Kail Wood. 118 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 119 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 120 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows. 121 Reinforced Cement Concrete Work In 1:2:4 Nominal Mix With 20Mm N / S Stone Aggregate. 122 Providing Reinforcement To The Rcc Works Including Bending, Binding, Cutting Placing In Position Complete. 123 Centering And Shuttering Including Proping, Struting Etc And Removal Of Farm Work.Lintel / V Beam 124 Slab 125 Slab Edges 126 Providing 50Mm Thick Cement Concrete Flouring With Floating Coat Of Neat Cement. 127 12Mm Thick Cement Sand Plaster In 1:4 Mix 128 1:3 Mix With Floating Coat Of Neat Cementfor Saptic Tank. 129 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 130 Providing And Laing / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 131 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 132 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 133 Providing And Fixing Of Pvc Wasit Pipe Sink Including Pvc Waist Fititng Complete ( Flexable 40 Mm Dia = 1 No ) 134 Providing And Fixing Of Sanitary Fititng 135 Structual Steel Works Welded In Built Up Section, Trusses And Framed Works Including Cutting Hoisting, Fixing In Position And Applying Priming Coat Of Approved Steel Primer Complete. 136 Providing And Fixing Corrogated G.S Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.63 Mm Thick ) 137 Providing Ridge Or Hip Of Width 60Cm Over All With Plain Gs Sheets Fixed With Polymer Coated J Or L Hoors ( 0.63 Mm Thick ) 138 Providing And Fixing Of Coloured Eves Boarding 139 Providing And Fixing Of 12 Mm Thick Plyboard Soffit Along Wiith Supporting Of Frist Class Popular Wood Ballies. 140 Supplying And Fixing Rolling Shutter Of Approved Make Made Of Required Size Ms Lathes Interlocked Together Through Their Entire Length Etc Complete With 80X0.90 Mm Ms Laths With 0.90 Mm Thick Top Cover. 141 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 142 Distempering Lwith 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Lcoats Whereever Required To Achive Even Shade. ( Two Coats ) 143 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 144 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Includingpriming Coat Of Approved Brand And Manufacture.A ) Wood Works 145 B ) On Steel Work 146 Add. Provision For Plumbing, And Electrification To The Quarter 147 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport A ) Cement And Steel For Average Lead Of 21 ( Km ) 148 B ) Sand For Average Lead Of 22 ( Km ) 149 C ) 20Mm Aggregate For Average Lead Of 22 ( Km ) 150 C ) 40Mm Aggregate For Average Lead Of 22 ( Km ) 151 E ) Bricks For Average Lead Of21 ( Km ) 152 F ) Quarry Stone For Average Lead Of20 ( Km ) 153 G ) Soling Stone For Average Lead Of21 ( Km ) 154 Extra Carriage Of Material From Dumping Site Actual Site By Mannual Labour.A ) Cementfor Average Lead Of 400 ( Mts ) 155 B ) Steel For Average Lead Of 400 ( Mts ) 156 C ) Sand & 20Mm Agg. For Average Lead Of400 ( Mts ) 157 C ) 40Mm Agg. For Average Lead Of400 ( Mts ) 158 E ) Bricks For Average Lead Of 400 ( Mts ) 159 F ) Quarry Stone For Average Lead Of400 ( Mts ) 160 G ) Soling Stone For Average Lead Of 400 ( Mts ) 161 03. ( Part A ) Wss Dadasara ( Adv. Cost Rs. 53, 49, 616 / - ) 162 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steel. Rest Specifications Are As Per Cluase - 1 Of Sbd. Capacity Of Motor =12.5 Hp 163 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site.Rest Specifications As Per Cluase -8 Of Sbd The Size Of The G.I Is Given Below Size : Dn 100Class: C ( Heavy ) 164 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 165 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 166 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 167 Providing And Laying Of Stone Soling Including Manual Compaction 168 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 169 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 170 Providing And Laying In Position Cement Concrete Of Specified Grade Of Reinforcement Cement Concreteincluding Curing But Excluding The Cost Of Centring And Shuttering . Finishing And Reinforcement All Work Upto Plinth Level With 1: 1.5 : 3Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 171 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 3 : 6 Mix ( 1 Cement , 3 Coarse Sand , 6 Graded Stone Aggregate 40Mm Nominal Size ) 172 12, Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 173 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placinng In Position And Binding All Complete Upto Plinth Level Thermomechanically Treated Bars Of Grage Fe-500D Or More 174 Fabrication, Providing And Fitting Of Split Type Ms Clamps 10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100Mm 175 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Class: C 176 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 100 , Class-C 177 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: 100 Mmclass: C Class 178 Providing And Fitting Of Ductile Iron Duoble Flanged , Non-Rising Spindle Soft Seated Gland Less Gate / Sluice Valve. Rest Specificationsas Per Cluase -12Of Sbd . The Size Of The Valve Is Given Below Size = Dn 100, Pn 1.6 / 16 179 Providing And Fitting Of Ductile Ironnrv, Rest Specificationsas Percluase 13 Of Sbd .The Size Of Valveis Given Below Size = Dn 100, Pn 1.6 / 16 180 Providing, Fitting, Testing And Commissioning Ofdn50 , Pn 1.6 / 16Diameter Arv ( Air Release Valve ) , Rest Specificationsas Percluase 14 Of Sbd . 181 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses, Construction Of Lineretc. Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer , Including Welding And Bolted With Special Shaped Washers Etc. Complete 182 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 183 Fabrication Of Gantry Mechanism / Cgi Shed / Angle Iron Sleeping Bedby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 184 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=3Ton No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 185 Providing , Installation, Testing And Commission Of 100 Kva Ht Transformer, 3 Phase ( Level 2 ) . Complete Specifications As Per Cluase - 26 Of Sbd. 186 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 187 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 188 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation 189 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 190 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 191 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 192 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 193 P / F Danger Plate With Clamps 194 Providing And Fixing G.I Barbed Wire For Anti Climbing 195 Providing And Fixing Of Anti Climbing Devices With Clamps 196 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 197 Painting Of Poles Red Oxide 198 Painting Of Poles Aluminum Paint 199 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 200 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 201 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 202 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point Andht Transformer. 203 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 100Kva 204 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:Complete Specifications As Per Cluase- 43-C Of Sbd 205 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Complete Specifications As Per Cluase- 44 Of Sbdrating::50Kva 206 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 10Sqmm 207 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only. I ) 50 Sqmm, 3.5Core, Lt, 1.1 Kv 208 Ii ) 10 Sqmm, 2 Core, Lt , 1.1 Kv 209 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 210 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 211 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.Rest Specifications As Per Clause-50 Of Sbd 212 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is To Be Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Directed. 213 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 214 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 215 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 216 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of :Providing Of Tool Kit Consists Of Following Items Rest Specifications As Per Clause - 56 Of Sbd 217 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 218 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Srest Specification As Per Clause -57 Of Sbd 219 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 220 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 221 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 222 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 223 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. 224 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.50 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 225 Providing, Cutting , Fittingand Welding Green Pvc Coated Welded Wire Fencewith Squaremesh -4And Wire Diameter 1.5 Mmto Be Fitted Onall Openverticalsides Of The D.G Set Shed . The Job Includes Cutting, Welding, Hoisting Etc As Per Site Requirement. 226 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 10 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Rating: 30 Kva , Air Cooled. 227 Providing And Fixing Of Puf Enclosure In Walls, Ceiling Ridges Etc Made Up Of 60 Mm Thick Rigid Puf, Cfc Free With Profile Surface On One Side, Conforming To Is-12436-88 With Subsequent Amendments Having Density Of 40±2 Kg / M3 Sandwiched Between 0.5 Mm Pre-Painted Galvanized Steel Sheet As Per Is-14246-95 With Subsequent Amendments With 18-20 Microns Of Exterior Polyester Coating Of White Color On Epoxy Primer On Both Sides. The Basic Substrate Is Gr-120 Hot Dip Galvanized Steel. The Panels Are Made By Continuous Line And Are Joined Together By Means Of Tongue-N-Groove Joint System. The Joints Shall Be Air-Tight By Using Proper Sealant ( Like Silicon Pu Foam Etc ) . The Puf Panels Have Closed Cell Content Of 90-95%; Thermal Conductivity Of 0.023 At 10W / Mk; Compressive Strength Of 2.1 Kg / M2 ( At 10% Deformation ) ; Water Vapor Permeability 0.08-0.12 Gm / H_M2; Self-Extinguishing Fire Property Make: Confirming To Is Code 228 Providing Ridges Or Hips Of Width 60 Cm Overall With Plain G.S Sheets Fixed With Polymer Coated J- Or L- Hooks , Bolts And Nuts 8 Mm Dia. G.I Limpet And Bitumen Washers Complete 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / Sq.M 229 Providing And Fixing Plain Eaves Boarding 2Nd Class Kail Wood ( 250 X 32 Mm Nominal Size ) 230 Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto .5 M In -All Kinds Of Soil 231 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately. ) Powder Coated Aluminum ( Minimum Thickness Of Powder Coated 50 Microns ) 232 Providing And Fixing 12Mm Thick Pre Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board ( Conforming To Is:12823 Grade-I Type-Ii ) In Paneling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. 233 Providing And Fixing Aluminum Casement Windows Fastener Of Required Length For Aluminum Windows With Necessary Screws Etc. Complete Powder Coated Minimum Thickness 50 Micron Aluminum 234 Providing And Fixing Aluminum Round Shape Handle Of Outer Dia 100Mmwith Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge Powder Coated Minimum Thickness 50 Micron Aluminum 235 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer In-Charge.With Floating Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.00 Kg / Sqm ) 236 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 237 Carriage Of Soling Stone By Mechanical Transportincluding Loading, Unloading And Stacking ( Average Distance-5Km ) 238 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 239 ( Part B ) Pump House Of Wss Dadasara ( Adv. Cost Rs. 15, 20, 462 / - ) 240 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 241 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete 242 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 243 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:3:6 Coarse Sand 20Mm Nominal Size Crushed Stone Agg. ) 244 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:1.5:3 Graded Stone Agg. 20Mm Nominal Size 245 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 246 Brick Work With Fps Bricks Of Class Designation 75 In Foundtion & Plinth In Cement Mortar 1:6 ( 1 Cement, 6 Coarse Sand ) 247 Extra For Brick Work In Super Structure Above Plinth Level Upto Floor V Level ( By Manual Means ) 248 Centring And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work Foundation 249 Walls Any Thickness 250 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 251 Structural Steel For Posts Including Priming Coat Complete 252 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows & Other Frames, Wrought Framed & Fixed In Position 2Nd Classkail Wood 253 Providing & Fixing Panelled Or Panelled & Glazed Shutters For Doors & Windows And Clerestory Windows Including Isimarked Black Enamelled M.S Butt Hingeswith Necessary Screws Excluding Panellingsecond Class Kail ( Imported Wood ) 35Mm Thick 254 Providing & Fixing Decorative Plywood B / S Decorative Veneer ( Type 1 ) Confirming To Is 1328 Bwr Type 255 Providing Cgs Sheet Roofing Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia With Bitumen & Gi Limpet Washersupto ( A Pitch Of 60 Degree ) Excld Cost Of Perlins, Rafters & Tresses 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 256 Providing Ridges Of Hips Of Width 60Cm Overall Width Plain Gs Sheets Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia Gi Limpet & Bitumen Washers Complete 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 257 12Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix 1:6 ( 1 Cement:6 Fine Sand ) 258 Distempring With Oil Bound Washable Distemper Of Approved Brand & Manufactureto Give An Even Shade New Work ( 2 Or More Coats ) Over And Incld. Priming Coat With Cement Primer 259 Painting With Ready Mixed Synthetic Enemal Paint Or Approved Brand & Manufacture In All Shades To Give An Even Shade New Steel Work ( Two Or More Coats ) 260 Finishing Walls With Water Proofing Cement Paint Of Approved Brand And Manufacture &Of Rqd Shade To Give An Even Shade New Work ( 2Or More Coats ) Applied @3.84Kg / 10Sqm 261 Providingglass Panes 10Kg / Sqm ( 4Mm Thick ) Windows And Clerestory Window Shutters ( Area Of Opening For Glass Panes Excld Portion Inside Shall Be Measured ) 262 Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Agg ) Finished With A Floating Coat Of Neat Cement Incld. Cement Slurry But Excld The Cost Of Nosing Of Steps Etc Complete 50Mm Thick With 20Mm N / S Stone Agg Crushed 263 Providing And Fixing Glass Strips In Joints Ofcement Concrete Floors 40Mm Wide And 4Mm Thick 264 Providing & Fixing Of 40X5mm Flat Iron Hold Fast 40Cm Long Including Fixing To Frameswith 10Mm Dia Bolts Nuts &Wooden Plugs And Embedding In Cement Conc Block 30X10x5cm 1:3:6Mix ( 1Cement:3Coarse Sand:6 Graded St Agg ) 20Mm Nominal Size 265 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) Over 75Mm Bed Of Dry Brick Ballast 40Mm Nominal Size Well Rammed, Consolidated And Grouted With Fine Sand Including Finishing The Topsmooth 266 Providing & Fixing Hardware Items Complete 150 Mm Tower Bolt 267 150 Mm Handles 268 L Drop 269 Dry Rubble Masonry With Hard Stone In Foundation & Plinth Using Quarry Stone With Bond Stones 270 Providing And Fixing Soil Wastepipes ( 10Ft Long ) 100Mm Dia Pvc B Class 271 Providing And Fixing Vent Pipes 100Mm Dia Pvc B Class 272 Pvc Colour 100 Mm 273 P / F Of Pvc Floor Trap With Jali 274 Providing And Fixing G.I Pipes B Class20 Longcompleate With G.I Fittings Including All Necessary Fittings Like Sockets, Tee, Reducer Etc15mm Dia Nominal Bore 275 Providing & Fixing Water Closet Squating Pan ( English W.C Pan ) With 100 Mm And Pvc POr S Trap 10 Ltr Low Leavel P.V.C Flushing Cistern Of App Make With Manually Controlled Device With Fittings Long Pan Pattern White Vitreous China W.C Pan 580Mm 276 Water Storage Tank Pvc Tripple Layer Of Approved Brand With All Necessary Fittings 277 Stain Less Steel Heavy Duty Bib Cock Long Nose 278 Stain Less Steel Heavy Duty Angle Valve 279 Pvc Connections 280 P / F Man Hole Cover With Frame 281 P / F Of Heatingpoints 282 Lighting Points 283 P / F Of Water Geyser Of 25 L Capacity 284 Carriage Of Materials By Mt Stone Agg. Fromfor An Avg Lead Of 20 Km 285 Sand Fromfor An Avg Lead Of 20 Km 286 Cement Fromfor An Avg Lead Of 10 Km 287 Bricks Fromfor An Avg Lead Of 25 Km 288 Steel Fromfor An Avg Lead Of 10 Km 289 Stones Fromfor An Avg Lead Of 10 Km 290 Soling For 10 Kms Lead 291 04. ( Part A ) Wss Aripal Lift ( Adv. Cost Rs. 50, 31, 691 / - ) 292 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Completespecification As Per Cluase 1 Of Of Sbd Capacity Of Motor = 15 Hp Or Suitable For Above Parameters 293 Providing / Supplying And Fitting Of G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class B And C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Detailed Specification As Per Cluase 8 Of Of Sbdsize : Dn80class: C ( Heavy ) 294 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 295 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 296 Providing And Laying Of Stone Soling Including Manual Compaction 297 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 298 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 40Mm Nominal Size ) 299 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 3 : 6 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 300 12 Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 301 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80Mm 302 Providing And Fitting Of Bend With Flanges .The Flanges Shall Be Ms Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Prividing And Fitting Of Nuts, Bolts, Gaskets Etc As Per Site Requirement. Rest Specification As Per Cluase 15 Of Sbdsize:Dn 80Class: C 303 Cutting Of Hot Dip Galvanized G.I, C-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter.The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thicknessof Flange Shall Conform To Is 6392 Part 1St Table-17.:Rest Specification As Per Cluase 11 Of Sbd. The Size Of The Pipe Isdn 80 , Class-C 304 Fabrication, Providing, Fitting T - Junction Out Of 1 Mtr Of Pipe With Length Of 1 Ft Each Arm The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints Rest Specification As Per Cluase 09 Of Sbdsize: 80Mmclass: C Class 305 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductile Iron, Wedge With Fully Vulcanized Epdmrubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible Forburied Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsrest Specification As Per Cluase 12 Of Sbd. Size: Dn80pn:1.6 / 16 306 Providing And Fitting Of Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdmrubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13 Of Sbd. Size: 80Mmpn: 1.6 / 16 307 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Befitted To G.I Risingmain. The Arv Shall Have The Following Specifications: -I. Valve Type - Single Chamber, Single Orifice.Ii. End Connection - Flanged Ends To Is 1538Iii. Working Temperature - 70Oc To 550 Civ. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring - Epdmvi. Construction -Ductile Iron With Stainless Steel Floatsvii. Coating - Epoxy With Corrosion Resistancerest Specification As Per Cluase 14 Of Sbd.Size = Dn 50 , Pn 1.6 / 16 308 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 309 Fabrication Of Gantry Mechanism / Cgi Shed / Angle Iron Sleeping Bedby Way Of Providing Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 310 Providing, Installation And Testing Of Manual Type Triple Spur Gear Chain Pulley Block Along With Monorail Geared Travelling Trolley Having Following Features Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box.The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears. Load Chain:- The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. Rest Specification As Per Cluase 24 Of Sbd: Make = Reputed Makecapacity=3Ton No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 311 Creation Of Pope Mounted, Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Complete Specification As Per Clause- 26 Of Sbdrating: 63Kva Ht Transformer, 3 Phase ( Level 2 ) . 312 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 313 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 314 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 315 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 316 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative, Creepagedistance 320 Mm 317 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 318 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 319 P / F Danger Plate With Clamps 320 Providing And Fixing G.I Barbed Wire For Anti Climbing 321 Providing And Fixing Of Anti Climbing Devices With Clamps 322 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 323 Painting Of Poles Red Oxide 324 Painting Of Poles Aluminum Paint 325 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 326 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 327 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 328 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point Andht Transformer. 329 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 63 Kva 330 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:Complete Specification As Per Cluase - 43-D Of Spd. 331 Providing, Fitting, Testing And Commissioning Of Voltage Stabilizer As Per Specifications Below:Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator : Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50 ±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andrest Specification As Per Cluase 44 Of Sbd.Rating::50Kva 332 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 10 Sqmm 333 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 50 Sqmm, 3.5 Core, Lt, 1.1 Kv 334 Ii ) 10 Sqmm, 2 Core, Lt, 1.1 Kv 335 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 336 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 337 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Specifications As Per Cluase 50 Of Sbd 338 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°C Rest Specifications As Per Cluase 51 Of Sbd 339 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 340 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 341 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 342 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of :Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32 Each – 02 No.Rest Specifications And Quantity As Per Clause - 56 Of Sbd 343 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 344 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Srest Specifications And Quantity As Per Clause-57 Of Sbd 345 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 346 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 347 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 348 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6”= 9 Sft 349 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Of Appropriate Size. 350 Providing Ridges Or Hips Of Width 60 Cm Overall With Plain G.S Sheets Fixed With Polymer Coated J- Or L- Hooks , Bolts And Nuts 8 Mm Dia. G.I Limpet And Bitumen Washers Complete 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / Sq.M 351 Providing And Fixing Plain Eaves Boarding 2Nd Class Kail Wood ( 250 X 32 Mm Nomonal Size ) 352 Providing And Fixing Of Puf Enclosure In Walls, Ceiling Ridges Etc Made Up Of 60 Mm Thick Rigid Puf, Cfc Free With Profile Surface On One Side, Conforming To Is-12436-88 With Subsequent Amendments Having Density Of 40±2 Kg / M3 Sandwiched Between 0.5 Mm Pre-Painted Galvanized Steel Sheet As Per Is-14246-95 With Subsequent Amendments With 18-20 Microns Of Exterior Polyester Coating Of White Color On Epoxy Primer On Both Sides. The Basic Substrate Is Gr-120 Hot Dip Galvanized Steel. The Panels Are Made By Continuous Line And Are Joined Together By Means Of Tongue-N-Groove Joint System. The Joints Shall Be Air-Tight By Using Proper Sealant ( Like Silicon Pu Foam Etc ) . The Puf Panels Have Closed Cell Content Of 90-95%; Thermal Conductivity Of 0.023 At 10W / Mk; Compressive Strength Of 2.1 Kg / M2 ( At 10% Deformation ) ; Water Vapor Permeability 0.08-0.12 Gm / H_M2; Self-Extinguishing Fire Property Make: Confirming To Is Code 353 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.50 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 354 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately. ) Powder Coated Aluminum ( Minimum Thickness Of Powder Coated 50 Microns ) 355 Providing And Fixing 12Mm Thick Pre Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board ( Conforming To Is:12823 Grade-I Type-Ii ) In Paneling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. 356 Providing And Fixing Aluminum Casement Windows Fastener Of Required Length For Aluminum Windows With Necessary Screws Etc. Complete Powder Coated Minimum Thickness 50 Micron Aluminum 357 Providing And Fixing Aluminum Round Shape Handle Of Outer Dia 100Mmwith Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge Powder Coated Minimum Thickness 50 Micron Aluminum 358 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer In-Charge.With Floating Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.00 Kg / Sqm ) 359 Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto .5 M In -All Kinds Of Soil 360 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 361 Carriage Of Soling Stone By Mechanical Transportincluding Loading, Unloading And Stacking ( Average Distance-5Km ) 362 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 363 ( Part B ) Pump House Of Wss Aripal Lift ( Adv. Cost Rs. 15, 80, 610 / - ) 364 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 365 Filling Available Excavated Earth ( Excluding Rock ) In Tenches 366 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete 367 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 368 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:1.5:3 Graded Stone Agg. 20Mm Nominal Size 369 Reinforced Cement Concrete Work In Walls & As Well Asbeams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate ) 370 Brick Work With Fps Bricks Of Class Designation 75 In Foundtion & Plinth In Cement Mortar 1:6 ( 1 Cement, 6 Coarse Sand ) 371 Extra For Brick Work In Super Structure Above Plinth Level Upto Floor V Level ( By Manual Means ) 372 Centring And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work Fo 373 Walls Any Thickness 374 Structural Steel For Posts Including Priming Coat Complete 375 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows & Other Frames, Wrought Framed & Fixed In Position 2Nd Classkail Wood 376 Providing & Fixing Panelled Or Panelled & Glazed Shutters For Doors & Windows And Clerestory Windows Including Isimarked Black Enamelled M.S Butt Hinges With Necessary Screws Excluding Panellingsecond Class Kail ( Imported Wood ) 35Mm Thick 377 Providing & Fixing Decorative Plywood B / S Decorative Veneer ( Type 1 ) Confirming To Is 1328 Bwr Type 378 Providing Cgs Sheet Roofing Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia With Bitumen & Gi Limpet Washersupto ( A Pitch Of 60 Degree ) Excld Cost Of Perlins, Rafters & Tresses 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 379 Providing Ridges Of Hips Of Width 60Cm Overall Width Plain Gs Sheets Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia Gi Limpet & Bitumen Washers Complete 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 380 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix 1:6 ( 1 Cement:6 Fine Sand ) 381 Distempering With Oil Bound Washable Distemper Of Approved Brand & Manufactureto Give An Even Shade New Work ( 2 Or More Coats ) Over And Incld. Priming Coat With Cement Primer 382 Painting With Ready Mixed Synthetic Enemal Paint Or Approved Brand & Manufacture In All Shades To Give An Even Shade New Steel Work ( Two Or More Coats ) 383 Finishing Walls With Water Proofing Cement Paint Of Approved Brand And Manufacture &Of Rqd Shade To Give An Even Shade New Work ( 2Or More Coats ) Applied @3.84Kg / 10Sqm 384 Providingglass Panes 10Kg / Sqm ( 4Mm Thick ) Windows And Clerestory Window Shutters ( Area Of Opening For Glass Panes Excld Portion Inside Shall Be Measured ) 385 Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Agg ) Finished With A Floating Coat Of Neat Cement Incld. Cement Slurry But Excld The Cost Of Nosing Of Steps Etc Complete 50Mm Thick With 20Mm N / S Stone Agg Crushed 386 Providing And Fixing Glass Strips In Joints Ofcement Concrete Floors 40Mm Wide And 4Mm Thick 387 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 388 Providing & Fixing Of 40X5mm Flat Iron Hold Fast 40Cm Long Including Fixing To Frameswith 10Mm Dia Bolts Nuts &Wooden Plugs And Embedding In Cement Conc Block 30X10x5cm 1:3:6Mix ( 1Cement:3Coarse Sand:6 Graded St Agg ) 20Mm Nominal Size 389 Providing & Fixing Hardware Items Complete 150 Mm Tower Bolt 390 150 Mm Handles 391 L Drop 392 Dry Rubble Masonry With Hard Stone In Foundation & Plinth Using Quarry Stone With Bond Stones 393 Providing And Fixing Soil Wastepipes ( 10Ft Long ) 100Mm Dia Pvc B Class 394 Providing And Fixing Vent Pipes 100Mm Dia Pvc B Class 395 Pvc Colour 100 Mm 396 P / F Of Pvc Floor Trap With Jali 397 Providing And Fixing G.I Pipes B Class20 Longcompleate With G.I Fittings Including All Necessary Fittings Like Sockets, Tee, Reducer Etc15mm Dia Nominal Bore 398 Providing & Fixing Water Closet Squating Pan ( English W.C Pan ) With 100 Mm And Pvc POr S Trap 10 Ltr Low Leavel P.V.C Flushing Cistern Of App Make With Manually Controlled Device With Fittings Long Pan Pattern White Vitreous China W.C Pan 580Mm 399 Water Storage Tank Pvc Tripple Layer Of Approved Brand With All Necessary Fittings 400 Stain Less Steel Heavy Duty Bib Cock Long Nose 401 Stain Less Steel Heavy Duty Angle Valve 402 Pvc Connections 403 P / F Man Hole Cover With Frame 404 P / F Of Heatingpoints 405 P / F Of Lighting Points 406 P / F Of Water Geyser Of 25 L Capacity 407 Carriage Of Materials By Mechanical Transportstone Agg. Fromfor An Avg Lead Of 20 Km 408 Sand Fromfor An Avg Lead Of 20 Km 409 Cement Fromfor An Avg Lead Of 10 Km 410 Bricks Fromfor An Avg Lead Of 25 Km 411 Steel Fromfor An Avg Lead Of 10 Km 412 Stones Fromfor An Avg Lead Of 10 Km 413 Soling For 10 Kms Lead 414 Extra Carriage Of Material From Dumping Site To Site Of Work By Manual Labour For 400 Mtrs Leadaggregates 415 Sand 416 Cement 417 Steel 418 Soling 419 05. ( Part A ) Wss Syedabad Seer ( Adv. Cost Rs. 35, 68, 245 / - ) 420 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelimpeller:Rest Specification As Clause- 1 Of Sbd Motor Capacity = 15 Hp 421 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Rest Specifications As Per Clause-8 Of Sbdsize : Dn80class: C ( Heavy ) 422 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 423 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 424 Providing And Laying Of Stone Soling Including Manual Compaction 425 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 426 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 427 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80Mm 428 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Class: C 429 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 80 , Class-C 430 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: 80Mmclass: C Class 431 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Rest Specifications As Per Clause - 12 Of Sbdsize: Dn80pn:1.6 / 16 432 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.Rest Specifications As Per Clause - 13 Of Sbdsize: 80Mmpn: 1.6 / 16 433 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. The Arv Shall Have The Following Specifications: I. Valve Type -Single Chamber, Single Orifice.Rest Specifications As Per Clause - 14 Of Sbd Size = Dn 50 , Pn 1.6 / 16 434 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses, Construction Of Lineretc. Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer , Including Welding And Bolted With Special Shaped Washers Etc. Completeelectric Resistance Or Induction Butt Welded Tubes 435 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 436 Fabrication Of Gantry Mechanism / Cgi Shed / Angle Iron Sleeping Bedby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 437 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=3Ton No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 438 Creation Of Pope Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Rest Specification As Per Clause - 26 Of Sbdrating: 63Kva Ht Transformer, 3 Phase ( Level 2 ) . 439 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 440 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 441 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 442 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 443 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 444 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 445 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 446 P / F Danger Plate With Clamps 447 Providing And Fixing G.I Barbed Wire For Anti Climbing 448 Providing And Fixing Of Anti Climbing Devices With Clamps 449 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 450 Painting Of Poles Red Oxide 451 Painting Of Poles Aluminum Paint 452 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 453 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 454 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 455 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point Andht Transformer. 456 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 63Kva 457 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber:Rest Specifications As Per Clause- 43- D Of Sbd 458 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Rest Specifications As Per Cluase-44 Of Sbdrating::50Kva 459 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 10 Sqmm 460 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 50 Sqmm, 3.5Core, Lt, 1.1 Kv 461 Ii ) 10Sqmm, 2 Core, Lt , 1.1 Kv 462 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 463 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 464 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.Rest Specifications As Per Clause -50 Of Sbd 465 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Specifications As Per Clause -51 Of Sbd 466 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 467 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 468 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 469 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of :Providing Of Tool Kit Consists Of Following Items Rest Specifications As Per Clause- 56 Of Sbd 470 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 471 Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Srest Specifications As Per Clause -57 Of Sbd 472 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 473 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 474 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 475 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6”= 9 Sft 476 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. 477 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 478 Carriage Of Soling Stone By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 479 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 480 ( Part B ) Pump House Of Wss Syedabad Seer ( Adv. Cost Rs. 15, 10, 543 / - ) 481 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 482 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete 483 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 484 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:3:6 Coarse Sand 20Mm Nominal Size Crushed Stone Agg. ) 485 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:1.5:3 Graded Stone Agg. 20Mm Nominal Size 486 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 487 Brick Work With Fps Bricks Of Class Designation 75 In Foundtion & Plinth In Cement Mortar 1:6 ( 1 Cement, 6 Coarse Sand ) 488 Extra For Brick Work In Super Structure Above Plinth Level Upto Floor V Level ( By Manual Means ) 489 Centring And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work Fo 490 Walls Any Thickness 491 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows & Other Frames, Wrought Framed & Fixed In Position 2Nd Classkail Wood 492 Providing & Fixing Panelled Or Panelled & Glazed Shutters For Doors & Windows And Clerestory Windows Including Isimarked Black Enamelled M.S Butt Hingeswith Necessary Screws Excluding Panellingsecond Class Kail ( Imported Wood ) 35Mm Thick 493 Providing & Fixing Decorative Plywood B / S Decorative Veneer ( Type 1 ) Confirming To Is 1328 Bwr Type 494 Structural Steel Welded In Built Up Sections Trusses And Framed Work Incld Cutting Hoisting Fixing In Positon And Applying A Priminng Coat Of Approved Steel Primer All Completei / C Soffits & Eavz Boarding Of 2 Mm Thick Ms Sheet I / C Priming Coat Incl Soffits / Eavs Boarding 495 Providing Cgs Sheet Roofing Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia With Bitumen & Gi Limpet Washersupto ( A Pitch Of 60 Degree ) Excld Cost Of Perlins, Rafters & Tresses 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 496 Providing Ridges Of Hips Of Width 60Cm Overall Width Plain Gs Sheets Fixed With Polymer Coated J Or L Hooks Bolts & Nuts 8Mm Dia Gi Limpet & Bitumen Washers Complete 0.63Mm Thick With Zinc Coating Not Less Than 275G / Sqm 497 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix 1:6 ( 1 Cement:6 Fine Sand ) 498 Distempring With Oil Bound Washable Distemper Of Approved Brand & Manufactureto Give An Even Shade New Work ( 2 Or More Coats ) Over And Incld. Priming Coat With Cement Primer 499 Painting With Ready Mixed Synthetic Enemal Paint Or Approved Brand & Manufacture In All Shades To Give An Even Shade New Steel Work ( Two Or More Coats ) 500 Finishing Walls With Water Proofing Cement Paint Of Approved Brand And Manufacture &Of Rqd Shade To Give An Even Shade New Work ( 2Or More Coats ) Applied @3.84Kg / 10Sqm 501 Providingglass Panes 10Kg / Sqm ( 4Mm Thick ) Windows And Clerestory Window Shutters ( Area Of Opening For Glass Panes Excld Portion Inside Shall Be Measured ) 502 Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Agg ) Finished With A Floating Coat Of Neat Cement Incld. Cement Slurry But Excld The Cost Of Nosing Of Steps Etc Complete 50Mm Thick With 20Mm N / S Stone Agg Crushed 503 Providing And Fixing Glass Strips In Joints Ofcement Concrete Floors 40Mm Wide And 4Mm Thick 504 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 505 Providing & Fixing Of 40X5mm Flat Iron Hold Fast 40Cm Long Including Fixing To Frameswith 10Mm Dia Bolts Nuts &Wooden Plugs And Embedding In Cement Conc Block 30X10x5cm 1:3:6Mix ( 1Cement:3Coarse Sand:6 Graded St Agg ) 20Mm Nominal Size 506 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) Over 75Mm Bed Of Dry Brick Ballast 40Mm Nominal Size Well Rammed, Consolidated And Grouted With Fine Sand Including Finishing The Topsmooth 507 Providing & Fixing Hardware Items Complete 150 Mm Tower Bolt 508 150 Mm Handles 509 L Drop 510 Dry Rubble Masonry With Hard Stone In Foundation & Plinth Using Quarry Stone With Bond Stones 511 Providing And Fixing Soil Wastepipes ( 10Ft Long ) 100Mm Dia Pvc B Class 512 Providing And Fixing Vent Pipes 100Mm Dia Pvc B Class 513 Pvc Colour 100 Mm 514 P / F Of Pvc Floor Trap With Jali 515 Providing And Fixing G.I Pipes B Class20 Longcompleate With G.I Fittings Including All Necessary Fittings Like Sockets, Tee, Reducer Etc15mm Dia Nominal Bore 516 Providing & Fixing Water Closet Squating Pan ( English W.C Pan ) With 100 Mm And Pvc POr S Trap 10 Ltr Low Leavel P.V.C Flushing Cistern Of App Make With Manually Controlled Device With Fittings Long Pan Pattern White Vitreous China W.C Pan 580Mm 517 Water Storage Tank Pvc Tripple Layer Of Approved Brand With All Necessary Fittings 518 Stain Less Steel Heavy Duty Bib Cock Long Nose 519 Stain Less Steel Heavy Duty Angle Valve 520 Pvc Connections 521 P / F Man Hole Cover With Frame 522 Carriage Of Different Materials By Mechanical Transportcement And Steel For An Avg Lead Of 10 Km 523 Sand Fromfor An Avg Lead Of 20 Km 524 Stone Agg. For An Avg Lead Of 20 Km 525 Bricksfor An Avg Lead Of 25 Km 526 Soling For 10 Kms Lead 527 Extra Carriage Of Materials By Manually Lead 400 Mtrsaggregates 528 Sand 529 Cement 530 Soling 531 Steel 532 06. ( Part A ) Wss Bathen, Batadalav, Bajnari ( Adv. Cost Rs. 3, 89, 08, 300 / - ) 533 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are Given Below:Motor Rating: 20Hpdetailed Specifications As Per Sbd Clause 1 534 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are Given Below:Motor Rating: 35Hpdetailed Specifications As Per Sbd 535 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are Given Below:Motor Rating: 40Hpdetailed Specifications As Per Sbd 536 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 To These Pipes And Welding Of Flanges In Two Layers To Make The Flanged Joint Strong And Leak Proof. The Pipe Of 10 Ft Length Is To Be Weld On Both Sides With Flanges Using Welding Rod Of Reputed Make. The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints Of Column Pipes. The Job Further Includes Cutting Of 2 No. Rectangular Cable Slots In Each Flange. Size: Dn 80Class: C ( Heavy ) 537 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Rising Main Is To Be Laid As Per The Instructions Of The Engineer In Charge And Site Requirement.Size : Dn100class: C ( Heavy ) 538 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Rising Main Is To Be Laid As Per The Instructions Of The Engineer In Charge And Site Requirement.Size : Dn80class: C ( Heavy ) 539 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres: ( All Kinds Of Soil 01 Meter From Cutting Edge ) 540 Ordinary Rock ( 20% ) 541 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 542 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 543 Providing And Laying Of Stone Soling Including Manual Compaction 544 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 545 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 546 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 4: 8 Mix ( 1 Cement , 4 Coarse Sand , 8 Graded Stone Aggregate 40Mm Nominal Size ) 547 Cement Plaster ( In Coarse Sand ) 12Mm Cement Plaster Mix In 1:4 ( 1 Cement, 4 Coarse Sand ) 548 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placinng In Position And Binding All Complete Upto Plinth Level Thermomechanically Treated Bars Of Grage Fe-500D Or More 549 Providing And Laying In Position Cement Concrete Of Specified Grade Of Reinforcement Cement Concrete Including Curing But Excluding The Cost Of Centring And Shuttering . Finishing And Reinforcement All Work Upto Plinth Level With 1: 1.5 : 3Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 550 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80Mm 551 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipeand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Class: C 552 Providing And Fitting Of 300Mm In Length Gi Reducer Bend Flanged On Both Sides, Flange Conforming To Table-17 ( Pn16 ) To Be Fitted With The Column Pipe / Delivery Manifold Of Submersible Pumping Unit To Join Rising-Main And Column Pipe / Delivery Manifold. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes From Inside And Outside Of Pipe To Form Strong Welding Joint.Size: 100Mm-80Mm Class: C 553 Fabrication, Providing And Fitting Of T -Junction Out Of 1M Of Pipe With 1Ft Each Arm. The Job Includes All Types Of Skilled Labour, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Table 17 Flanges, Suitable Size Nuts, Bolts And Ri Gasket In The Flanged Joints ( Rest Specification As Per Clause 09 Of Sbd ) . Size: 80Mmclass: C Class 554 Fabrication, Providing And Fitting Of Washout Tee Junction Out Of 1M Of Pipe With 1Ft Each Arm. The Job Includes All Types Of Skilled Labour, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Table 17 Flanges, Suitable Size Nuts, Bolts And Ri Gasket In The Flanged Joints ( Rest Specification As Per Clause 09 Of Sbd ) .Size: 100Mmclass: C Class 555 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size 80 Mmpn1.6Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd 556 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbd Size: 80Mm, Pn: 1.6 / 16 557 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. Manufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 14Of Sbd 558 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc By Way Of Providing And Fitting Of Steel Work Welded In Built Up Sections / Framed Work , Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. The Job Involves Following Steel Details:I. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 559 Ii. In Grating , Frames , Guard Bar , Ladder , Railings, Brackets, Gates And Similar Works 560 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 561 Fabrication Of Gantry Mechanism / Cgi Shed / Bed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded. 562 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features : Make= Reputed Makecapacity =2Ton No. Of Load Chain Falls = 2 Or Abovemin. Height Of Lift = 6 M Manufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 24Of Technical Anexure Of Sbd 563 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Alonghaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 564 Creation Of Pope Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Ertificaterating:100Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufactures Test Certicicate To Be Apended And Rest Of Specification As Per Cluase 26 Of Sbdnote: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate 565 Creation Of Pope Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 , Copper Wound.Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Ertificaterating:250Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufactures Test Certicicate To Be Apended And Rest Of Specification As Per Cluase 26 Of Sbdnote: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate 566 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 567 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 568 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 569 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 570 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 571 Supply, Installation, Errection Of9 Mtrs Long St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 572 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 573 P / F Danger Plate With Clamps 574 Providing And Fixing G.I Barbed Wire For Anti Climbing 575 Providing And Fixing Of Anti Climbing Devices With Clamps 576 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 577 Painting Of Poles Red Oxide 578 Painting Of Poles Aluminum Paint 579 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 580 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 581 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 582 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 250Kva 583 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 100Kva 584 Fabrication, Providing And Fitting Of 20 Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43D 585 Fabrication, Providing And Fitting Of 50 Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43G 586 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supplyrest Technincal Specification As Per Cluase 45 Of Sbdrating::50Kva 587 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supplyrest Technincal Specification As Per Cluase 45 Of Sbdrating::100Kva 588 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Rest Technincal Specification As Per Cluase 47 Of Sbdsize: 10 Sq.Mm 589 Size: 25 Sq.Mm 590 Size: 6 Sq.Mm 591 Providing And Fitting Of 2 / 3 / 3.5 / Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminium Cable Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Rest Specifications As Per Clause 71 Of Sbdi ) 120 Sqmm Single Core Unarmoured Lt 1.1 592 Ii ) 50 Sqmm, 3.5Core Lt 1.1 593 Iii ) 10Sqmm, 2 Core Lt 1.1 594 Providing And Fitting Of Steel Enclosed Bus Bar Chamber With One Incoming And Three Outgoing Of 400A Rating, Provided With 400A 4Pole Mccb Etc, Complete. 595 Providing And Fitting Of Steel Enclosed Bus Bar Chamber With One Incoming And Two Outgoing Of 250A Rating, Provided With 250A 4Pole Mccb Etc, Complete. 596 Providing And Fitting Of Three / Single-Core, Copper Pvc Insulated Cable, Xlpe Armoured Conforming To Is: 694 Part 1St For Intedrnal Connectionscrimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Single Core Pvc Insulated 25Sqmm 597 Single Core Pvc Insulated 35Sqmm 598 P / I Of Earthing Station For Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kgrest Specification As Per Sbd Clause 48 599 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 600 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Technical Specification As Per Cluase 51 Of Sbd 601 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole . Rest Technical Specification As Per Cluase 52 Of Sbd 602 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 603 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 604 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 605 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise All The Items As Per Cluase 56Of Technical Anexure Of Sbd With Laid Down Specifications. 606 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 607 Providing Of Good Qualityconvenience And Utility Items. Technical Specification And Item Details Are As Per Cluase 57 Of Sbd. 608 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 609 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 610 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 611 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 612 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 613 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 614 Carriage Of Soling Stone By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 615 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading , Unloadingand Stacking ( Average Distance -25Km ) 616 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phasewater Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986Rating: 125Kva, Water Cooled Dg Rest Technical Specification As Per Cluase 66 Of Sbd 617 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phasewater Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986Rating:82.5Kva, Water Cooled Dg Rest Technical Specification As Per Cluase 66 Of Sbd 618 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 250A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacity Housed Properly In Cubical Enclosure Made Upof M.S Swg – 16 Sheet Steel ( Outdoor Type ) Duly Powder Paintedwith Anti Corrosive Paint Comprising Of Three Compartments For Incoming / Out Going Circuits And Mccb. The Panel Should Have Adequate Double Locking Arrangement With Cu-. Bus Bar 12X40 Mm With Bakelite Insulation And Lt Arrangement Selector Switches, Phase Indicators. The Equipment Should Be Installed At Appropriate Height In A Stand Consisting Of 50 X 50 X 6 Mm Angle Grouted In Ground With Appropriate Cement Bottoming As Per The Is Standard.The Work Is To Executed Near D.G Set At Site 619 Providing And Fixing Of Puf Enclosure In Walls, Ceiling Ridges Etc Made Up Of 60 Mm Thick Rigid Puf, Cfc Free With Profile Surface On One Side, Conforming To Is-12436-88 With Subsequent Amendments Having Density Of 40±2 Kg / M3 Sandwiched Between 0.5 Mm Pre-Painted Galvanized Steel Sheet As Per Is-14246-95 With Subsequent Amendments With 18-20 Microns Of Exterior Polyester Coating Of White Color On Epoxy Primer On Both Sides. The Basic Substrate Is Gr-120 Hot Dip Galvanized Steel. The Panels Are Made By Continuous Line And Are Joined Together By Means Of Tongue-N-Groove Joint System. The Joints Shall Be Air-Tight By Using Proper Sealant ( Like Silicon Pu Foam Etc ) . The Puf Panels Have Closed Cell Content Of 90-95%; Thermal Conductivity Of 0.023 At 10W / Mk; Compressive Strength Of 2.1 Kg / M2 ( At 10% Deformation ) ; Water Vapor Permeability 0.08-0.12 Gm / H_M2; Self-Extinguishing Fire Property Make: Confirming To Is Code 620 Providing Ridges Or Hips Of Width 60 Cm Overall With Plain G.S Sheets Fixed With Polymer Coated J- Or L- Hooks , Bolts And Nuts 8 Mm Dia. G.I Limpet And Bitumen Washers Complete 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / Sq.M 621 Providing And Fixing Plain Eaves Boarding 2Nd Class Kail Wood ( 250 X 32 Mm Nominal Size ) 622 Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto .5 M In -All Kinds Of Soil 623 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately. ) Powder Coated Aluminum ( Minimum Thickness Of Powder Coated 50 Microns ) 624 Providing And Fixing 12Mm Thick Pre Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board ( Conforming To Is:12823 Grade-I Type-Ii ) In Paneling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. 625 Providing And Fixing Aluminum Casement Windows Fastener Of Required Length For Aluminum Windows With Necessary Screws Etc. Complete Powder Coated Minimum Thickness 50 Micron Aluminum 626 Providing And Fixing Aluminum Round Shape Handle Of Outer Dia 100Mmwith Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge Powder Coated Minimum Thickness 50 Micron Aluminum 627 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer In-Charge.With Floating Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.00 Kg / Sqm ) 628 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.50 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 629 ( Part B ) Pump House Of Wss Bathen, Batadalav, Bajnari ( Adv. Cost Rs. 35, 08, 919 / - ) 630 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 631 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialall Kinds Of Soil : 632 Providing And Laying Of Stone Soling ( Dully Hand Packed ) On Horizontal Level. 633 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 634 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) 635 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 636 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade.Two Or More Coats On New Work 637 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 638 Providing And Laying50 Mm Thick Cement Concrete Flooringwith Floating Coat Of Neat Cement 639 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 640 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 641 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 642 Edges Of Slabs And Breaks In Floors And Walls. Under 20Cms Wide 643 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 644 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 645 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) : 9.1.1 First Classkailwood 646 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. First Class Kail Wood 35Mm 647 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 648 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) . First Class Kail Wood 35Mm 649 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. First Class Kail Wood 650 Providing And Fixing 35 Mm Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 651 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 652 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kailwood250x32 Mm ( Nominal Size ) 653 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 654 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 655 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone ( Quarry ) 656 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 657 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 658 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or Strap, 10 Litre Low Level P.V. C. Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests. 659 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laidon 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 660 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 13.88.1 1 Mm Thick 661 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 662 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 663 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 664 P / F Of 12 Mm Thick Ply Board Soffit Along With Supporting Of 1St Class Papular Wood 665 P / F Of Pvc Sanitary Fittingswith All Accessiories Of Reputed Compant With All Accessioriesc. Job ( To Be Paid As Per Actual ) Pvc Pipe 100Mm 666 Pvc Pipe 75Mm 667 Angle Valve 668 Bib Cock Cp 669 Basin Mixer Cp 670 Pvc Flow Trap 671 Door Bend / Tee 100Mm / 75Mm 672 Pvc Bends 100 / 75Mm 673 15Mm Dia Internal Pipe 674 P / F Of Plumbing & Electrition Items Of Reputed Make With Isi Mark Complete Job ( To Be Paid As Per Actual ) Lighting Points 1.5Mm Sq Wire 675 Heating Points 2.5Mm Sq Wire 676 P / F Of Ceiling Fan 1200Mm Sweep 677 P / F Of Exaust Fan 300Mm 678 P / F Of 25 Liter Gyser Inclding All Fitting / Fixures Complete 679 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Waterstorage Tank Isi : 12701 Marked, With Cover And Suitable Lockingarrangement And Making Necessary Holes For Inlet, Outlet And Overflowpipes But Without Fittings And The Base Support For Tank 680 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1Cement:2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete 681 Providing And Fixing Of Salem Stainless Stell Kitchen Sink Size 610X510x200mm 682 Providing Fixing Of Pvc Wasdte Pipe For Sink 683 Carriage By Mechanical Transportsteel & Cement@ 25Km 684 Sand @ 25 Km 685 Aggregates20mm @ 25Km 686 Aggregates 40Mm @ 25 Km 687 Bricks @ 25 Km 688 Stone Soiling @ 10 Km 689 Carriage By Manuallysteel @500 M 690 Cement 691 Sand & Agg @ 500 M 692 Aggregates 40Mm @ 500 693 Bricks @ 500 694 Stone Soiling @500 695 07. ( Part A ) Wss Chekpora Brazloo ( Adv. Cost Rs. 22, 74, 365 / - ) 696 Supply, Installation, Testing & Commissioning Of Open Well Pumping Units As Per Is 14220 At Filter Water Stage. Pump: - • Type Of Pump:Open Wellsubmersible Pump ( Horizontal ) Discharge :10000 Gph, At 30 M Head.• Quality Of Waterto Be Handled :Filter Watermeterial Of Construction:• Pump Casing:Cast Iron• Impeller:Ss • Pump Shaft:Stainless Steel• Motor Body: Cast Iron • Sealing :Dual Mech. Seal ? The Bowl Plate Shall Be Provided With Name Plate Giving Complete Specifications ? Motor: -• Rating : Suitable For Above Parameter• Method Of Starting: Star – Delta.• Frequency: 50Hz + 3%• Voltage : 415 + 6 %, -15% • Class Of Insulation: Suitable For Above Rating. • Sealing: Dual Mech. Seal.Note: Manufacturers Test Certificate To Be Appended And Detailed Specification As Per Clause 3 Of Sbd ) Motor Rating :10 Hp 697 Fabrication, Providing, Fitting And Lowering Of B Class Column Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth; The Job Includes Providing And Welding Of Flanges Conforming To Is: 6392, Table-17 And Pn 16 To These Pipes And Welding Of Flanges In Two Layers To Make The Flanged Joint Strong And Leak Proof. Detailed Specification As Per Cluase 7 Ofof Sbd Dn 100B ( Medium ) Pipe 698 Providing / Supplying And Fitting Of G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Bconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. Detailed Spacifications As Per Clause 8 Of Sbd.Dn 125B ( Medium ) Pipe 699 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 700 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M.Quantity : 90% Of Item No: 04 701 Fabrication, Providing, Fitting T- Junction Out Of 1 Mtr Of Pipe With Length Of1 Ft Each Arm The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Jointsrest Specification As Per Cluase 09Of Sbd 125 Mm 702 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions. Rest Specifications As Per Clause 12 Of Sbd.125 Mm 703 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13Of Sbd125 Mm 704 Fabrication, Providing, Fitting Long Raduisbendout Of 1 Mtr Of Pipe With Length Of1 Ft Each Arm The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints. Rest Specification As Per Cluase 15Of Sbd125 Mm 705 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. ( 01 Pair ) Size: 80 Mm 706 Cutting Of Hot Dip Galvanized G.I, C-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. :Rest Specification As Per Cluase 11Of Sbd. 125 Mm 707 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 708 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 709 Providing And Laying Of Soling Stone 710 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 711 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 712 Painting Of The 2 No. Gantry And Plate Form Of Wellusing One Coat Of Red Oxide Metal Primer And Two Coats Of Enamel Paintof Different Shades 713 Providing, Installation Andtestingof Manual Type Triple Spur Gear Chain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears. Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility.Rest Specification As Per Cluase 24Of Sbd. 714 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories Mu-G 15 Rest Spacification As Per Clause 43-------------- Of Sbd 715 Providing, Fitting, Testing And Commissioning Of 25Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50 ±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Rest Spacification As Per Clause 44 Of Sbd 716 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Rest Specification As Per Cluase 71Of Sbd.35 Sqmm, 3.5 Core L.T 1.1 Kv 717 Providing And Fitting Of 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipment. The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. The Main Specification Of The Cable Is Given Below:Rest Specification As Per Cluase 47Of Sbd.Size: 10 Sq.Mm 718 Providing And Fitting Ofpvc Iinsulated Copper Cable As Per Is 694-Along With Thimbling As Per Requirmentsrest Specification As Per Cluase 67 Of Sbd.16 Sq.Mm 1 Core Lt 1.1 Kv 719 Supply , Installation , Commissioning And Creation Of Pole Mounted, Outdoor Type Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is: 1180 ( Part 1 ) 2014 With Latest Amendments. Type: Ht / Lt Transformer Type Of Cooling:Onan. Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals, Conservator With Oil Level Indicator, Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is: 1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate.Rating: 63 Kva 720 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 721 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 722 Supply, Installation, Testing And Commissioning Of 11Kv Polymer Fuses Set Horn Gap 3-Phase 200 A Suitable For Vertical Installation 723 Supply, Installation, Testing And Commissioning Of Gapless Surge Arrestor Station Class, 10Ka, 9Kv, La With Polymer Housing, Station Type 724 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 725 Supply, Installation, Erection Of 9 Mtrs Longh.T Pope Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required The Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 726 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement 727 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed.All Kinds Of Soil 728 Providing And Laying Of Soling Stone Including Manual Compaction 729 Concrete Cement Bottoming 1:2:4 Mix As Per Rec Standards , 0.5 Cum / Pole 730 P / F Danger Plate With Clamps 731 Providing And Fixing G.I Barbed Wire For Anti-Climbing / Anti-Climbing Devices 732 Providing And Fixinganti-Climbing Devices 733 Providing And Fitting Of Pg Clamps 734 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 735 Painting Of Poles Red Oxide 736 Painting Of Poles Aluminum Paint 737 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 738 Supply, Installation, Testing Of 35 Sq Mm Xlpe Ht Cable ( Abc Type ) Of 11 Kv Grade With Following Specifications Size Cross Sectional Area In Squre Mm ) =3X35 Phases Red, Yellow , Blue 739 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 740 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits. 63 Kva 741 P / I Of Earthing Station For Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length:2000 Mmback Fill Compound :30 Kg 742 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Specification As Per Cluase 50Of Sbd. 743 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36 Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170° Lumens: >12000Operating Temperature: -20°C To 60°Crest Specification As Per Cluase 51Of Sbd. 744 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 745 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Rest Specification As Per Cluase 71Of Sbd.10Mm2 2Core Lt 1.1 Kv 746 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site In Charge. 747 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover.With 2-Core 4 Mm2 Cu ( 25 M ) Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 748 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 749 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Ofproviding Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) 02 Sets Complete Ii. Double Ended Ring Spannerschrome Plated02 Sets Completeiii. Allen Key Set Black Finish 02 Sets Complete Iv. Combination Pliers Insulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Each – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Each – 02 No. Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205 Make – 02 No.Vii. Insulated Screw Drivers Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 0275 3 1.6 X0.4 02100 3 3 X 0.4 02125 3.5 3.5 X 0.502 150 3.5 3.5 X 0.5 02 200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg, 340 Gm , 600 Gm –Each – 1No. .Ix. Heavy Duty Pipe Wrench Length In Mm - 200, 300, 600 Each – 01 No.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. Xii. Digital Clamp Tester Capable To Measure Up To 400A - 1 No. Xiii. Hack Saw Frame With Hack Saw Blade – 01 No. Xiv. S-16 Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. 750 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patella ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, 751 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 752 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 No’S Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 753 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 754 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 755 Providing Of 1 Kw Heat Convector For Operators For Winter Season 756 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipment Installed At Site Of Appropriate Sizes. 757 Design, Supply, Installation, Testing And Commissioning Of Automatic Power Factor Correctionpanel For Improvement Of Power Factor : 758 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled / Water Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canopy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 10 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Rating: 25 Kva Dg Set 759 ( Part B ) Pump House Of Wss Checkpora Brazloo ( Adv. Cost Rs. 21, 32, 051 / - ) 760 Earth Work In Excavation Over Areas Exceeding 30 Cm And Upto 1.5 M In Depth 1.5 M In Width As Well As 10 Sqm On Plan Inculding Disposal Of Excavated Soil Upto1mt From Cutting Edge. 761 Extra For Earth Work For Every Additional Lift Of 1.5 M Or Part Thereof 762 Providing And Laying Of Dry Stones Soling Tightly Hand Packed. 763 Provding And Laying Of 1:4:8 Nominal Mix Cement Concrete With 40 Mm N / S Stone Aggregate 764 R.R Masonary With Quarry Stone Laid In 1:6 Cm 765 R.R Masonary With Quarry Stone Laid In 1:6 Dry 766 Providing And Laying Of 50 Mm Thick Dp Band Over Stone Work In 1:2:4 Nominal Mix 767 Pointing On Stone Work With Cement Mortar In 1:3 Mix ( Flush Type ) 768 Brick Work With Ommon Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 769 Extra Over Brick In Super Structure Up To Floor V Level. 770 Providing And Fixing Of Wooden Chowkat In First Class Kail Wood. 771 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows First Class Kail Wood. 772 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 773 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 774 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows. 775 Reinforced Cement Concrete Work In 1:2:4 Nominal Mix With 20Mm N / S Stone Aggregate. 776 Providing Reinforcement To The Rcc Works Including Bending, Binding, Cutting Placing In Position Complete. 777 Centering And Shuttering Including Proping, Struting Etc And Removal Of Farm Work.Lintel / V Beam 778 Slab 779 Slab Edges 780 Providing 50Mm Thick Cement Concrete Flouring With Floating Coat Of Neat Cement. 781 12Mm Thick Cement Sand Plaster In 1:4 Mix 782 B ) 1:3 Mix With Floating Coat Of Neat Cementfor Saptic Tank. 783 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 784 Providing And Laing / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 785 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 786 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 787 Providing And Fixing Of Pvc Wasit Pipe Sink Including Pvc Waist Fititng Complete ( Flexable 40 Mm Dia = 1 No ) 788 Providing And Fixing Of Sanitary Fititng ( Ls ) 789 Structual Steel Works Welded In Built Up Section, Trusses And Framed Works Including Cutting Hoisting, Fixing In Position And Applying Priming Coat Of Approved Steel Primer Complete. 790 Providing And Fixing Corrogated G.S Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50 Mm Thick ) 791 Proving Ridge Or Hip Of Width 60Cm Over All With Plain Gs Sheets Fixed With Polymer Coated J Or L Hoors ( 0.50 Mm Thick ) 792 Providing And Fixing Of Ms Eves Boarding 300 Mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job 793 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 794 Distempering Lwith 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Lcoats Whereever Required To Achive Even Shade. ( Two Coats ) 795 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 796 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Lincludingpriming Coat Of Approved Brand And Manufacture.Wood Works 797 Add. Provision For Plumbing , Iron Grills To Windows And Electrification To The Quarter Lump Sum To Be Paid As Per Actual ( L.S ) 798 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport A ) Cement And Steel For Average Lead Of 20 ( Km ) 799 B ) Sand For Average Lead Of 25 ( Km ) 800 C ) 20Mm Aggregate For Average Lead Of 27 ( Km ) 801 D ) 40Mm Aggregate For Average Lead Of 27 ( Km ) 802 E ) Bricks For Average Lead Of10 ( Km ) 803 F ) Quarry Stone For Average Lead Of15 ( Km ) 804 G ) Soling Stone For Average Lead Of06 ( Km ) 805 Head Load Of Material From Dumping Site To Actual Work Site For Average Lead Of.A ) Cementfor Average Lead Of 600 ( Mts ) 806 B ) Steel For Average Lead Of 600 ( Mts ) 807 C ) Sand & 20Mm Agg. For Average Lead Of600 ( Mts ) 808 D ) 40Mm Agg. For Average Lead Of600 ( Mts ) 809 E ) Bricks For Average Lead Of 600 ( Mts ) 810 F ) Quarry Stone For Average Lead Of600 ( Mts ) 811 G ) Soling Stone For Average Lead Of 600 ( Mts ) 812 08. ( Part A ) Wss Chatripora Gassrena ( Adv. Cost Rs. 51, 17, 327 / - ) 813 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unit As Per Is 8034 With Following Specification Are As Under:Pump: Efficiency= Not Less Than 50%Speed= 2900 Rpm Type Of Pump= Mixed Flow. Type Of Fluid To Be Handled = Clear Watermaterial Of Construction: Impeller= Stainless Steel Pump Shaft= Stainless Steel Ss 410. Pump Casing Cast Iron / Stainless Steelimpeller: Impeller Is Of The Enclosed Or Semi – Enclosed Type And Properly Balanced.Enclosed Impellers Equipped With Seal Rings On Their Hubs. Coupling: A Suitable Coupling Arrangement Provided With Pump Set. Non Return Valve: - Non Return Valve Of The Suitable Size Provided Above The Pump Discharge Case.Motor:- Method Ofstarting = Star – Delta Speed = 3000 ( Sync ) . Frequency= 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 Phase Efficiency= Not Less Than 90%Rating=Suitable For Above Parametersclass Of Insulation=F / Suitable For Above Parameters Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. Motor Rating: 25 Hp 814 Fabrication, Providing, Fitting And Lowering Of B Class Column Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth; The Job Includes Providing And Welding Of Flanges Conforming To Is: 6392, Table-17 And Pn 16 To These Pipes And Welding Of Flanges In Two Layers To Make The Flanged Joint Strong And Leak Proof. The Pipe Of 10 Ft Length Is To Be Weld On Both Sides With Flanges Using Welding Rod Of Reputed Make. The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints Of Column Pipes. The Job Further Includes Cutting Of 2 No. Rectangular Cable Slots In Each Flange. Dn 80B ( Medium ) Pipe 815 Providing / Supplying And Fitting Of G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class B And C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint. Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm. Nuts And Bolts Nuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gaskets Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Main Technical Specifications Of The Pipe Are Given Here Under:Dn 80C ( Heavy ) Pipe 816 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 817 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M.Quantity : 90% Of Item No: 04 818 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. ( 01 Pair ) Size: 80 Mm 819 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Of80mm Diameter Class-C, G.I Pipe, 1 M Lengthand Flanged On Both Ends Andto Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.80 Mm C 820 Cutting Of Hot Dip Galvanized G.I, C-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17.Rest Specification As Per Cluase 11Of Sbd. 80 Mm 821 Fabrication, Providing, Fitting T- Junction Out Of 1 Mtr Of Pipe With Length Of1 Ft Each Arm The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Jointsrest Specification As Per Cluase 09Of Sbd 80 Mm 822 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsrest Specification As Per Cluase 12Of Sbd.80 Mm 823 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13Of Sbd.80 Mm 824 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 825 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 826 Providing And Laying Of Soling Stone 827 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 828 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 829 Painting Of The 2 No. Gantry And Plate Form Of Wellusing One Coat Of Red Oxide Metal Primer And Two Coats Of Enamel Paintof Different Shades 830 Providing, Installation Andtestingof Manual Type Triple Spur Gear Chain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears. Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. Rest Specification As Per Cluase 24Of Sbd.2 Ton 831 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories Mu-G 30 Rest Spacification As Per Clause 43-------------- Of Sbd 832 Providing, Fitting, Testing And Commissioning Of 50Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50 ±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Rest Spacification As Per Clause 44 Of Sbd 833 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. Rest Specification As Per Cluase 71Of Sbd.50 Sqmm, 3.5 Core L.T 1.1 Kv 834 Providing And Fitting Of 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) –1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipment. The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. The Main Specification Of The Cable Is Given Below:Rest Specification As Per Cluase 47Of Sbd.10 Sq.Mm 835 Providing And Fitting Ofpvc Iinsulated Copper Cable As Per Is 694-Along With Thimbling As Per Requirmentsrest Specification As Per Cluase 67 Of Sbd.16 Sq.Mm 1 Core Lt 1.1 Kv 836 P / I Of Earthing Station For Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length:2000 Mmback Fill Compound :30 Kg 837 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Specification As Per Cluase 50Of Sbd. 838 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36 Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170° Lumens: >12000Operating Temperature: -20°C To 60°Crest Specification As Per Cluase 51Of Sbd. 839 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. Rest Specification As Per Cluase 71Of Sbd.10 Sqmm 2Core Lt 1.1 Kv 840 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site In Charge. 841 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover.With 2-Core 4 Mm2 Cu ( 25 M ) Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 842 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 843 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Ofproviding Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) 02 Sets Completeii. Double Ended Ring Spannerschrome Plated02 Sets Completeiii. Allen Key Set Black Finish 02 Sets Completeiv. Combination Pliers Insulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Each – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Each – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205 Make – 02 No.Vii. Insulated Screw Drivers Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 0275 3 1.6 X0.4 02100 3 3 X 0.4 02125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg, 340 Gm , 600 Gm –Each – 1No. . Ix. Heavy Duty Pipe Wrench Length In Mm - 200, 300, 600 Each – 01 No.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No.Xii. Digital Clamp Tester Capable To Measure Up To 400A - 1 No.Xiii. Hack Saw Frame With Hack Saw Blade – 01 No.Xiv. S-16 Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. 844 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 845 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 No’S Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 846 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patella ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, 847 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 848 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 849 Providing Of 1 Kw Heat Convector For Operators For Winter Season 850 Providing And Fitting Of 01No Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Name Of Wss And The Departmentsizen 6X1.6 851 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipment Installed At Site Of Appropriate Sizes. 852 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled / Water Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canopy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 10 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Rating: 40 Kva Dg Set 853 Supply , Installation , Commissioning And Creation Of Pole Mounted, Outdoor Type Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is: 1180 ( Part 1 ) 2014 With Latest Amendments. Type: Ht / Lt Transformer Type Of Cooling:Onan. Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals, Conservator With Oil Level Indicator, Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is: 1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate.63 Kva 854 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 855 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 856 Supply, Installation, Testing And Commissioning Of 11Kv Polymer Fuses Set Horn Gap 3-Phase 200 A Suitable For Vertical Installation 857 Supply, Installation, Testing And Commissioning Of Gapless Surge Arrestor Station Class, 10Ka, 9Kv, La With Polymer Housing, Station Type 858 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 859 Supply, Installation, Erection Of 9 Mtrs Longh.T Pope Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required The Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 860 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement 861 P / F Danger Plate With Clamps 862 Providing And Fixing G.I Barbed Wire For Anti-Climbing / Anti-Climbing Devices 863 Providing And Fitting Of Pg Clamps 864 Providing And Fixinganti-Climbing Devices 865 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 866 Painting Of Poles Red Oxide 867 Painting Of Poles Aluminum Paint 868 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 869 Supply, Installation, Testing Of 35 Sq Mm Xlpe Ht Cable ( Abc Type ) Of 11 Kv Grade With Following Specifications Size Cross Sectional Area In Squre Mm ) =3X35 Phases Red, Yellow , Blue 870 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 871 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 872 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 873 Providing And Laying Of Soling Stone 874 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 875 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits. 63 Kva 876 ( Part B ) Pump House Of Wss Chatripora Gassrena ( Adv. Cost Rs. 17, 69, 433 / - ) 877 Earth Work In Excavation Over Areas Exceeding 30 Cm And Upto 1.5 M In Depth 1.5 M In Width As Well As 10 Sqm On Plan Inculding Disposal Of Excavated Soil Upto1mt From Cutting Edge. 878 Providing And Laying Of Dry Stones Soling Tightly Hand Packed. 879 Provding And Laying Of 1:4:8 Nominal Mix Cement Concrete. 880 R.R Masonary With Quarry Stone Laid In 1:6 Cm 881 R.R Masonary With Quarry Stone Laid In 1:6 Dry 882 Providing And Laying Of 50 Mm Thick Dp Band Over Stone Work In 1:2:4 Nominal Mix 883 Pointing On Stone Workwith Cement Mortor In 1:3 Mix ( Flush Type ) 884 Brick Work With Ommon Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 885 Extra Over Brick In Super Structure Up To Floor V Level. 886 Providing And Fixing Of Wooden Chowkat In First Class Kail Wood. 887 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows First Class Kail Wood. 888 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 889 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 890 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows. 891 Reinforced Cement Concrete Work In 1:2:4 Nominal Mix With 20Mm N / S Stone Aggregate. 892 Providing Reinforcement To The Rcc Works Including Bending, Binding, Cutting Placing In Position Complete. 893 Centering And Shuttering Including Proping, Struting Etc And Removal Of Form Work.Lintel / V Beam 894 Slab 895 Slab Edges 896 Providing 50Mm Thick Cement Concrete Flouring With Floating Coat Of Neat Cement. 897 A ) 12Mm Thick Cement Sand Plaster In 1:4 Mix 898 B ) 1:3 Mix With Floating Coat Of Neat Cementfor Saptic Tank. 899 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 900 Providing And Laing / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 901 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 902 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 903 Providing And Fixing Of Pvc Wasit Pipe Sink Including Pvc Waist Fititng Complete ( Flexable 40 Mm Dia = 1 No ) 904 Providing And Fixing Of Sanitary Fititng 905 Structual Steel Works Welded In Built Up Section, Trusses And Framed Works Including Cutting Hoisting, Fixing In Position And Applying Priming Coat Of Approved Steel Primer Complete. 906 Providing And Fixing Corrogated G.S Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.63 Mm Thick ) 907 Proving Ridge Or Hip Of Width 60Cm Over All With Plain Gs Sheets Fixed With Polymer Coated J Or L Hoors ( 0.63 Mm Thick ) 908 Providing And Fixing Of Ms Eves Boarding 300 Mm Wide And Soft Boarding Including Primping Coat Of Red Opxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brtand And Manufacture Complete Job 909 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 910 Distempering Lwith 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Lcoats Whereever Required To Achive Even Shade. ( Two Coats ) 911 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 912 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Includingpriming Coat Of Approved Brand And Manufacture.On Wood Work 913 Add. Provision For Plumbing , And Electrification And Iron Grills To Windows To The Quarter. ( Ls ) 914 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport A ) Cement And Steel For Average Lead Of10 ( Km ) 915 B ) Sand For Average Lead Of 25 ( Km ) 916 C ) 20Mm Aggregate For Average Lead Of 25 ( Km ) 917 D ) 40Mm Aggregate For Average Lead Of 25 ( Km ) 918 E ) Bricks For Average Lead Of25 ( Km ) 919 F ) Quarry Stone For Average Lead Of25 ( Km ) 920 G ) Soling Stone For Average Lead Of10 ( Km ) 921 Extra Carriage Of Material From Dumping Site Actual Site By Mannual Labour.A ) Cementfor Average Lead Of 300 ( Mts ) 922 B ) Steel For Average Lead Of 300 ( Mts ) 923 C ) Sand & 20Mm Agg. For Average Lead Of300 ( Mts ) 924 D ) 40Mm Agg. For Average Lead Of300 ( Mts ) 925 E ) Bricks For Average Lead Of 300 ( Mts ) 926 F ) Quarry Stone For Average Lead Of300 ( Mts ) 927 G ) Soling Stone For Average Lead Of 300 ( Mts ) 928 09. ( Part A ) Wss Nowgam Nard ( Adv. Cost Rs. 47, 61, 689 / - ) 929 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unit As Per Is 8034 With Following Specification Are As Under:Pump: Discharge :8000Gph , Head-140 M , Efficiency= Not Less Than 50%Speed= 2900 Rpm Type Of Pump= Mixed Flow. Type Of Fluid To Be Handled = Clear Watermaterial Of Construction: Impeller= Stainless Steel Pump Shaft= Stainless Steel Ss 410. Pump Casing Cast Iron / Stainless Steelimpeller: Impeller Is Of The Enclosed Or Semi – Enclosed Type And Properly Balanced.Enclosed Impellers Equipped With Seal Rings On Their Hubs. Coupling: A Suitable Coupling Arrangement Provided With Pump Set. Non Return Valve: - Non Return Valve Of The Suitable Size Provided Above The Pump Discharge Case.Motor:- Method Ofstarting = Star – Delta Speed = 3000 ( Sync ) . Frequency= 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 Phase Efficiency = Not Less Than 90%Rating=Suitable For Above Parameters Class Of Insulation=F / Suitable For Above Parameters E.Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. Motor Rating :30 Hp 930 Providing / Supplying And Fitting Of G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Bconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint. Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm. Nuts And Bolts Nuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gaskets Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Main Technical Specifications Of The Pipe Are Given Here Under:Dn 100C ( Medium ) Pipe 931 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 932 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M.Quantity : 90% Of Item No: 04 933 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsrest Specification As Per Cluase 12Of Sbd.100 Mm 934 Proproviding And Fitting Ofductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) .Rest Specification As Per Cluase 13Of Sbd.100 Mm 935 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. ( 01 Pair ) Size: 80 Mm 936 Fabrication, Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Of80mm Diameter Class-C, G.I Pipe, 1 M Lengthand Flanged On Both Ends Andto Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.100 Mm C 937 Cutting Of Hot Dip Galvanized G.I, C-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17.:Rest Specification As Per Cluase 11Of Sbd. 100 Mm 938 Fabrication, Providing, Fitting T- Junction Out Of 1 Mtr Of Pipe With Length Of1 Ft Each Arm The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Jointsrest Specification As Per Cluase 09Of Sbd 100 Mm 939 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 940 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 941 Providing And Laying Of Soling Stone 942 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 943 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 944 Painting Of The 2 No. Gantry And Plate Form Of Wellusing One Coat Of Red Oxide Metal Primer And Two Coats Of Enamel Paintof Different Shades 945 Providing, Installation Andtestingof Manual Type Triple Spur Gear Chain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears. Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility.Rest Specification As Per Cluase 24Of Sbd.2 Ton 946 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories Mu-G 40 Rest Spacification As Per Clause 43-------------- Of Sbd 947 Providing, Fitting, Testing And Commissioning Of 50 Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50 ±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Rest Spacification As Per Clause 44 Of Sbd 948 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Rest Specification As Per Cluase 71Of Sbd.50 Sqmm, 3.5 Core L.T 1.1 Kv 949 Providing And Fitting Of 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) –1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipment. The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. The Main Specification Of The Cable Is Given Below:Rest Specification As Per Cluase 47Of Sbd.16 Sqmm 950 Providing And Fitting Ofpvc Iinsulated Copper Cable As Per Is 694-Along With Thimbling As Per Requirmentsrest Specification As Per Cluase 67 Of Sbd.16 Sq.Mm 1 Core Lt 1.1 Kv 951 P / I Of Earthing Station For Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length:2000 Mmback Fill Compound :30 Kg 952 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Specification As Per Cluase 50Of Sbd. 953 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36 Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170° Lumens: >12000Operating Temperature: -20°C To 60°Crest Specification As Per Cluase 51Of Sbd. 954 Providing And Fitting Of 2 Core, 3 Core, 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminum Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. Rest Specification As Per Cluase 71Of Sbd.10 Sqmm 2Core Lt 1.1 Kv 955 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site In Charge. 956 Supply , Installation , Commissioning And Creation Of Pole Mounted, Outdoor Type Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is: 1180 ( Part 1 ) 2014 With Latest Amendments. Type: Ht / Lt Transformer Type Of Cooling:Onan. Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals, Conservator With Oil Level Indicator, Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is: 1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate.Rating: 63 Kva 957 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 958 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 959 Supply, Installation, Testing And Commissioning Of 11Kv Polymer Fuses Set Horn Gap 3-Phase 200 A Suitable For Vertical Installation 960 Supply, Installation, Testing And Commissioning Of Gapless Surge Arrestor Station Class, 10Ka, 9Kv, La With Polymer Housing, Station Type 961 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 962 Supply, Installation, Erection Of 9 Mtrs Longh.T Pope Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required The Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 963 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement 964 Earth Work In Excavation Required For Installation Ofgantry Mechanismand Associated Worksby Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed In All Kinds Of Soil. 965 Providing And Laying Of Soling Stone 966 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 967 P / F Danger Plate With Clamps 968 Providing And Fixing G.I Barbed Wire For Anti-Climbing / Anti-Climbing Devices 969 Providing And Fitting Of Pg Clamps 970 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 971 Painting Of Poles Red Oxide 972 Painting Of Poles Aluminum Paint 973 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 974 Supply, Installation, Testing Of 35 Sq Mm Xlpe Ht Cable ( Abc Type ) Of 11 Kv Grade With Following Specifications Size Cross Sectional Area In Squre Mm ) =3X35 Phases Red, Yellow , Blue 975 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 976 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits. 63 Kva 977 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover.With 2-Core 4 Mm2 Cu ( 25 M ) Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 978 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 979 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Ofproviding Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) 02 Sets Completeii. Double Ended Ring Spannerschrome Plated02 Sets Completeiii. Allen Key Set Black Finish 02 Sets Completeiv. Combination Pliers Insulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Each – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Each – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205 Make – 02 No.Vii. Insulated Screw Drivers Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 0275 3 1.6 X0.4 02100 3 3 X 0.4 02125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg, 340 Gm , 600 Gm –Each – 1No. . Ix. Heavy Duty Pipe Wrench Length In Mm - 200, 300, 600 Each – 01 No.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No.Xii. Digital Clamp Tester Capable To Measure Up To 400A - 1 No.Xiii. Hack Saw Frame With Hack Saw Blade – 01 No.Xiv. S-16 Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. 980 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patella ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, 981 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 982 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 983 Providing Of 1 Kw Heat Convector For Operators For Winter Season 984 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipment Installed At Site Of Appropriate Sizes. 985 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled / Water Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canopy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 10 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Rating:50 Kva Dg Set 986 ( Part B ) Pump House Of Wss Nowgam Nard ( Adv. Cost Rs. 19, 47, 322 / - ) 987 Earth Work In Excavation Over Areas Exceeding 30 Cm And Upto 1.5 M In Depth 1.5 M In Width As Well As 10 Sqm On Plan Inculding Disposal Of Excavated Soil Upto1mt From Cutting Edge. 988 Extra For Earth Work For Every Additional Lift Of 1.5 M Or Part Thereof 989 Supply And Filling Of Gsb Boulders Including All Leads And Lifts 990 Providng And Laying In Position Cement Concrete Of Specified Grade Exlcuding The Cost Of Centring And Shuttering- All Work Up To Plinth Level 1:4:8 ( 1 Cement:4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size 991 Providing And Laying In Position Specified Grade Of Rcc ( 1:2:4 ) Mix Using 20 Mm Aggregates Inlcld. Curing Complete Job 992 Providing And Laying In Position Specified Grade Of Excluding The Cost Of Centring And Shuttering - All Work Up To Plinth Level. 1:3:6 ( 1 Cement:3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size 993 R.R. Masonary With Quary Stone Laid In Dry. Using Quarry Stone With Bond Stone 994 Brick Work With Ommonlybrunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 995 Extra Over Brick In Super Structure Up To Floor V Level. 996 Providing Wood Work In Frames Of Doors , Windows Clerestorywindows And Other Frames , Wrought Framed And Fixed In Position With Hold Fast Lugs Or With - Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Saperately ) : Kail Wood. 997 Providng And Fixing Of Glazed Shutters For Doors, Windows And Clerestory Windows Using 10 Kgs / Sqm ( 4 Mm Thick ) Float Rate Of Thickness Of Glass Panes Including Isi Marked Ms Prssed Butt. Shutters In Mm Per Sqm Hinfes Bright Finsiehd To Requried Size With Necessary 35X30 Screwskail Wood. 998 Providing And Fixing 35 Mm Thick Wire Gauze Shuttersusing Galvanised M.S. Wire Gauze Of Average Width Foraperture 1.4 Mm In Both Directoin With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws :Kail Wood. 999 P / F Of 40X5mm Hold Fasts Incld. Fixing In 1:3:6 Mix. 1000 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm N / S Stone Aggregate. 1001 Providing Reinforcement To The Rcc Works Including Bending, Binding, Cutting Placing In Position Complete. 1002 Centering And Shuttering Including Proping, Struting Etc And Removal Of Farm Work. ( A ) Lintel Band & Beam 1003 ( B ) Suspended Floors ( Slab ) 1004 ( C ) Foundations / Bases Of Columns. 1005 Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand .: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50Mm Thick. 1006 A ) 20Mm Thick Cement Plaster In 1:4 Nominal Mix. 1007 B ) 6Mm Thick 1:3 Mix With Floating Coat In Septic Tank 1008 Providing And Fixing Salem Stainless Steel A Lsi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.L. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Whereverrequired:. Size 610X510x200mm 1009 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 1010 P / Fist Quality Ceramic Glazedtilesconfirming To I. S : 13753 Of Minimum Thickness 5Mm Of Approved Make Likenitco, Orient, Somany, Kajaria Etc.In All Colours, Shades Except Begundy, Bottle Green , Black Of Any Size As Approved By Engineer -In -Charge In Skirting, Risers Of Steps And Dados , Laid On 12Mm Thick Bed Of Cement Mortar ( 1 : 3 ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing The Joints With White Cement Mixed With Pigment Ofmatching Shade Complete. 1011 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 1012 Providing And Applying Priming Coat With Ready Make Pink Or Grey Primer Of Approved Brand And Manufacture 1013 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Lincludingpriming Coat Lof Approved Brand And Manufacture. 1014 Provision For Sanitary Fittings And Water Supply Installations Viz. Bib Cocks, Towel Rod, G.I Pipe Fittings, Pvc Disposal Pipes Including Manholes, Mirror, Cistern, Commode, 50Lt Capacity Geyser, Sinketc. Water Storage Tank Triple Layer 1000Lt Capacity Etc Complete Job As Per The Directions Of Engineer In Charge. ( Ls ) 1015 Providing, Hoisting And Fixing , Trusses, Purlins, Rafters, Using Ist Class Poplar Wood 1016 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 1017 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 1018 Providing And Fixing Ofeves Boarding 0.50Mm Thick 1019 Providing And Fixing Ofcoloured Gs Sheets As Soffit Boarding 1020 Provision For Ornamental Ms Grill In Window Frames . 1021 Distempering With 1St Qualiyt Arcylic Distemper Of Approved Brand And Manufacture Including Applying Additional Coats Where Ever Requried To Achieve Even Shade ( Two Coats ) 1022 Provision For Providing And Fixing Pvc Conduitsof Standard Make For Electric Fiting Including Electric Fittings Jusing Wire And Other Electric Installations Of Standard Make Including McbS And Main Control Board And Service Wire Complete Job Lighting Poingts 6 No Heating Poingt 4 No ( Ls ) 1023 Dismentling Of Exisitng Old And Damaged Pump Operator Quarter Incld. Stakng Of Serviceable Material And Disposal Of Unserviceable Material As Per Directions Of Engineer Incharge. The Dismantled Material So Retrieved From The Structure Will Be The Property Of Executing Agency. ( Ls ) 1024 Carriage Of Material From Source To Dumping Site At Road By Mechnical Transport.A ) Cement And Steel For Average Lead Of30km 1025 B ) Sand For Average Lead Of50 Km 1026 C ) 40 Mm Aggregate For Average Lead Of 50 Km 1027 D ) 20 Mm Aggregate For Average Lead Of 50Km 1028 E ) Bricks For Average Lead Of 16 Km 1029 F ) Quarry Stone For Average Lead Of05 Km 1030 Extra Carriage Of Material Fromdumping Site To Actual Site Of Work A ) Cementfor Average Lead Of 500M 1031 B ) Steel For Average Lead Of500 M 1032 C ) Sand 20 Mm Aggregate For Average Lead Of 500 M 1033 D ) 40 Mm Aggregate For Average Lead Of500 M 1034 E ) Soling Tone For Average Lead Of500 M 1035 10. ( Part A ) Wss Wuyan Kashtrag ( Adv. Cost Rs. 94, 11, 300 / - ) 1036 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are:Motor Rating: 20Hpdetailed Specifications As Per Cluase 1 Sbd 1037 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are:Motor Rating: 15Hpdetailed Specifications As Per Cluase 1 Sbd 1038 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. The Mainspecicifications Of Pumping Unit Are:Motor Rating: 7.5Hpdetailed Specifications As Per Cluase 1 Sbd 1039 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Multistage 1440Rpmmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Ironthe Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parameters.C ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Delta Rating: 50Hpdetailed Specifications As Per Cluase 5 Sbd 1040 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 To These Pipes And Welding Of Flanges In Two Layers To Make The Flanged Joint Strong And Leak Proof. The Pipe Of 10 Ft Length Is To Be Weld On Both Sides With Flanges Using Welding Rod Of Reputed Make. The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints Of Column Pipes. The Job Further Includes Cutting Of 2 No. Rectangular Cable Slots In Each Flange. Size: Dn 65Class: B ( Medium ) 1041 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 50Class: C ( Heavy ) Rest Specification As Per Details In Cluase 7 Of Sbd 1042 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) .S. The Rising Main Is To Be Laid As Per The Instructions Of The Engineer In Charge And Site Requirement And Details As Per Cluase 8 Of Sbdsize : Dn80class: C ( Heavy ) 1043 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Rising Main Is To Be Laid As Per The Instructions Of The Engineer In Charge And Site Requirement And Technical Specification As Per Cluase 8 Of Sbdsize : Dn50class: C ( Heavy ) 1044 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 1045 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M. 1046 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 1047 Providing And Laying Of Stone Soling Including Manual Compaction 1048 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 1049 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1050 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 65Mm 1051 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 50Mm 1052 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipeand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Class: C 1053 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe And Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 50Class: C 1054 Providing And Fitting Of 300Mm In Length Gi Reducer Bend Flanged On Both Sides, Flange Conforming To Table-17 ( Pn16 ) To Be Fitted With The Column Pipe / Delivery Manifold Of Submersible Pumping Unit To Join Rising-Main And Column Pipe / Delivery Manifold. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes From Inside And Outside Of Pipe To Form Strong Welding Joint.Size: 80Mm-65Mm Class: C 1055 Fabrication, Providing And Fitting Of T -Junction Out Of 1M Of Pipe With 1Ft Each Arm. The Job Includes All Types Of Skilled Labour, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Table 17 Flanges, Suitable Size Nuts, Bolts And Ri Gasket In The Flanged Joints ( Rest Specification As Per Clause 09 Of Sbd ) . Size: 80Mmclass: C Class 1056 Fabrication, Providing And Fitting Of T -Junction Out Of 1M Of Pipe With 1Ft Each Arm. The Job Includes All Types Of Skilled Labour, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Table 17 Flanges, Suitable Size Nuts, Bolts And Ri Gasket In The Flanged Joints ( Rest Specification As Per Clause 09 Of Sbd ) . Size: 50Mmclass: C Class 1057 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size 80 Mmpn1.6Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd 1058 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size 50 Mmpn1.6Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd 1059 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size 80 Mm Pn 1.6Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbd Size: 80Mm, Pn: 1.6 / 16 1060 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbd Size: 50Mm, Pn: 1.6 / 16 1061 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. Manufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 14Of Sbd 1062 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc By Way Of Providing And Fitting Of Steel Work Welded In Built Up Sections / Framed Work , Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. The Job Involves Following Steel Details:I. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 1063 Ii. In Grating, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 1064 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 1065 Fabrication Of Gantry Mechanism / Cgi Shed / Angle Iron Bed By Way Of Providing Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded. 1066 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features : Make= Reputed Makecapacity =2Ton No. Of Load Chain Falls = 2 Or Abovemin. Height Of Lift = 6 M Manufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 24Of Technical Anexure Of Sbd 1067 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Alonghaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 1068 Creation Of Pope Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Ertificaterating: 100Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufactures Test Certicicate To Be Apended And Rest Of Specification As Per Cluase 26 Of Sbdnote: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate 1069 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1070 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1071 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation. 1072 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1073 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1074 Supply, Installation, Errection Of9 Mtrs Long St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 1075 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1076 P / F Danger Plate With Clamps 1077 Providing And Fixing G.I Barbed Wire For Anti Climbing 1078 Providing And Fixing Of Anti Climbing Devices With Clamps 1079 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1080 Painting Of Poles Red Oxide 1081 Painting Of Poles Aluminum Paint 1082 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1083 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 1084 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1085 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1086 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 100Kva 1087 Fabrication, Providing And Fitting Of 7.5Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43A 1088 Fabrication, Providing And Fitting Of 20 Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43D 1089 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supplyrest Technincal Specification As Per Cluase 45 Of Sbrating::30Kva 1090 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Rest Technincal Specification As Per Cluase 45 Of Sbdrating::50Kva 1091 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 16 Sqmm 1092 Size: 10 Sqmm 1093 Providing And Fitting Of 2 / 3 / 3.5 / Core, Xlpe, 1.1Kv And 11Kv Grade Armoured Aluminium Cable Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Rest Specifications As Per Clause 71 Of Sbdi ) 70 Sqmm , 3.5Core Lt 1.1Kv 1094 Ii ) 10 Sqmm, 2 Core Lt 1.1Kv 1095 Providing And Fitting Of Steel Enclosed Bus Bar Chamber With One Incoming And Three Outgoing Of 400A Rating, Provided With 400A, 36Ka, 4Pole Mccb Etc, Complete. 1096 Providing And Fitting Of Three / Single-Core, Copper Pvc Insulated Cable, Conforming To Is: 694 Part 1St For Internal Connections With Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Copper Thimbled And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Single Core Pvc Insulated 25Sqmm 1097 P / I Of Earthing Station For Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1098 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . Rest Technical Specification As Per Cluase 50 Of Sbd 1099 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Technical Specification As Per Cluase 51 Of Sbd 1100 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole.Rest Technical Specification As Per Cluase 52 Of Sbd 1101 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1102 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1103 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 1104 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise All The Items As Per Cluase 56Of Technical Anexure Of Sbd With Laid Down Specifications. 1105 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1106 Providing Of Good Qualityconvenience And Utility Items. Technical Specification And Item Details Are As Per Cluase 57 Of Sbd. 1107 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1108 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1109 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1110 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1111 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 1112 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 1113 Carriage Of Soling Stone By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 1114 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading , Unloadingand Stacking ( Average Distance -25Km ) 1115 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phasewater Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986Rating: 62.5Kva, Water Cooled Dg Rest Technical Specification As Per Cluase 67 Of Sbd 1116 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.50 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1117 Providing, Fabrication And Fitting Of Welded Ms Pvc Coatedwire Mesh ( 0.50 X 0.5 Inch And 1.50Mm Wire Diameter To The Dg Set Shed 1118 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole, 415 V, 50 Kv Breaking Capacity Rest Technical Specification As Per Cluase 67 Of Sbd 1119 Sitc Of Submersible Motor Starter: Mu-G 75Fully Automatic Submersible Motor Starters. Rating = 75 Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 66-110 A.Protection = Under Voltage / Over Voltage Relays ( 01 No. For Each Starter ) 1120 ( Part B ) Pump House Of Wss Wuyan Kashtrag ( Adv. Cost Rs. 17, 79, 004 / - ) 1121 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 1122 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 1123 Providing Laying Stone Soling In Horizontal Level 1124 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 1125 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 1126 P / F Of Heating With 2.5 Sq. Mm Wire For Heating Points Along With Mcb Of 32 Amp Connected In Two Way Mcb Box Of Havells / Polycab Or Equilavent Complete Job 1127 P / F Of Led Bulb 15 Wattof Syska / Plilips With Angle Holder With Square Block & Providind & Fixing Of 1.0 Mm Wiring Of Havells / Polycab Or Equalavent Complete Job 1128 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1129 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade.Two Or More Coats On New Work 1130 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 1131 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete. 1132 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 1133 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 1134 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 1135 Edges Of Slabs And Breaks In Floors And Walls. Under 20Cms Wide 1136 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 1137 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 1138 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 1139 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) : 9.1.1 First Classkailwood 1140 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. First Class Kail Wood 35Mm 1141 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 1142 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) . First Class Kail Wood 35Mm 1143 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. First Class Kail Wood 1144 Providing And Fixing 35 Mm Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 1145 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.Welded 1146 Providing And Fixing Plained Eaves Boarding.2Nd Class Deodar Wood250x32 Mm ( Nominal Size ) 1147 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 1148 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 1149 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone ( Quarry ) 1150 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 1151 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 1152 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or Strap, 10 Litre Low Level P.V. C. Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests. 1153 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laidon 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 1154 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 13.88.1 1 Mm Thick 1155 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 1156 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1157 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1158 Providing And Fixing Stainless Steel A Lsi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.L. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required: Kitchen Sink With Drain Board & Pvc Pipe510x1040mm Bowl Depth 250Mm 1159 P / F Of 12 Mm Thick Ply Board Soffit Along With Supporting Of 1St Class Papular Wood 1160 P / F Of Pvc Sanitary Fittingswith All Accessiories Of Reputed Compant With All Accessioriesc. Job ( To Be Paid As Per Actual ) 100 Mm Dia Pvc Pipe 1161 80 Mm Dia Pvc Pipe 1162 Floor Trap 1163 Tees / Door Bends / 100 / 75 Mm 1164 Plain Bend / 100 / 75 Mm 1165 Basin Mixer 1166 Bib Cock Cp 1167 Angle Valve 1168 15 Mm Dia Gi Pipes 1169 Providing & Fixing Led Flood Light 100 W Along With Necessary Supply Line 1170 Providing & Fixing 8 Mtr Octagonal Almunium Tubular Poles Along With Juction Box Inld Cost Of Base Of Concrete 1:2:4 ( 0.9X0.9X1.5 M ) & Execavation Incld Cost Of Other Fixtures For Holding Leds Incld Clamps 1171 Supply & Fixing 0F 25 Lts Gyser Of Approved Make 1172 P / F Of Ceiling Fan 1200 Mm Sweep 1173 P / F Exuast Fan 300 Mm 1174 Providing & Placing On Terrace ( All Floor Levels ) Polyethlene Water Storage Tank With Cover & Suitable Locking Arrangement & Making Necessary Holes For Inlet Putlet 7 Overflow. 1175 Carriage By Mechanical Transportsteel / Pipe @ 20 Km 1176 Cement @ 20 Km 1177 Sand / Bajri@ 20 Km 1178 40 Mm Agg@ 20 Km 1179 Bricks @ 20 Km 1180 Soilling @ 10Km 1181 Extra Carriage By Manuallysteel At An Avg Lead Of 300 Mtr 1182 Cement 1183 Sand / Bajri 1184 40 Mm Agg 1185 Bricks 1186 Soilling 1187 Bricks 1188 Soilling 1189 11. ( Part A ) Wss Poshwan Gadikhal ( Adv. Cost Rs. 1, 22, 94, 950 / - ) 1190 Supply, Installation, Testing & Commissioning Of Open Well Pumping Units As Per Is 14220 Atfilter Water Stage.Pump: - • Type Of Pump : Open Well Vertical Submersible Pump• Quality Of Water To Be Handled : Filter Watermeterial Of Construction:• Pump Casing : Cast Iron• Impeller : Ss • Pump Shaft : Stainless Steel• Motor Body : Cast Iron • Sealing : Dual Mech. Seal• Rating : Suitable For Above Parameter • Method Of Starting: Star – Delta.• Frequency : 50Hz + 3%• Voltage : 415 + 6 %, - 15%Manufactures Test Certificate To Be Apended Abd Detailed Specification As Per Cluase 4 Of Of Sbdmotor Rating = 5 Hp 1191 Design, Supply, Providing, Installation, Successful Testing And Commissioning Of Vertical Turbine Pumping Unit Driven By Hollow Shaft Vt Motor For Pumping Water From Nallah Of Following Parameters.• Site Conditionaltitude = 1580 Meters ( Amsl ) Ambient Temperature = +40ºc To - 15ºcrelative Humidity = 60%• Type Of Water = Raw Water Having Specific Gravity Of Unity Average.• Quality Of Water = Raw Water With Silt Having Medium To Coarse Sand.• Sump / Liner Bed Level =8Mbelow From Machine Floor Level• Water Columnin Liner / Sump = 2 M Abovefrom Sump / Liner Bed Levela. Pump1. Discharge= 18000 Gph 2. Type= Self Water Lubricated, Vt Pump, Open Line Shaft.3. Liquid To Be Handled = Raw Water4. Rpm=1460 5. Head=120 Mtrs6. Efficiency= Not Lessthan 75%7. Impeller= Semi-Enclosed Mixed Flow All Bronze / Stainless Steel 8. Line Shaft / Head Shaft = Stainless Steel9. Length Of Each Line Shaft = 1 Mmaximum 10. Total Length Of Line Shaft = 10 M ( Excluding Head Shaft ) 11. Impeller Shaft= Stainless Steel12. Line Shaft Bearing = Cutless Rubber / Neoprene Rubber13. Line Shaft Coupling = Stainless Steel Threaded 14. Suction Strainer = Ms Fabricated15. Suction Bowl / Bell Mouth=Cast Iron16. Pump Bowl= Cast Iron17. Column Pipe= Mild Steel Of Wall Thickness Not Less Than 8Mm Flanged Type In Assorted Lengths. At Least 10 Mtr Column Pipes To Be Provided.Vt Pumpto Be Designed With Minimum Number Of Stages. B. Prime Mover1. Type= Vertical Hollow Shaft, Acsquerral Cage Induction Motor 2. Power Supply = 03 Phase, 415V + 10% Ac3. Frequency= 50Hz + 3%4. Rpm=1450 Synchronous5. Efficiency= Not Lessthan 90%6. Hp = Not Less Than 70 Hp7. Class Of Insulation = F Or Above8. Type Of Duty= Continuous9. Type Of Rotor =Suitable Among Single Squirrel Cage / Double Squerral Cage , Single Or Double Skewed Squirrel Cage. 10. Gd2= Suitable For Above Parameters.11. Motor Thrust Bearing = Anti Friction Ball / Roller Bearing12. Method Of Starting = Star / Deltathe Motor Should Be Able To With Stand Fluctuations In Voltage And Should Be Conformingwithlatest Is Specifications.C. Accessories• Each Pump Unit Shall Be Provided Withsuitable Dischargehead With Proper Stiffening Box Arrangement, Non Reverse Ratchet, Coupling Etc As Per Standard Specification Besides All Other Accessories Required For Satisfactory Performance And Mechanical Works Required Forinstallation Of Pumping Unit At Site Are Included In The Job.Note: Providing Of Test Certificate & Characteristic Curve Of Pumping Equipment Is Compulsory And Pumping Unit Is To Be Approved From The Concerned Sub Divisional Office Before Procuring. 1192 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Rising Main Is To Be Laid As Per The Instructions Of The Engineer In Charge And Site Requirement. The Size Of Pipe Is Given Below :I.Size : Dn 150 Class - C ( Heavy ) 1193 Ii. Size : Dn 80 Class - C ( Heavy ) 1194 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 1195 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 1196 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 1197 Providing And Laying Of Stone Soling Including Manual Compaction 1198 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 1199 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1200 1: 4 : 8 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 40Mm Nominal Size ) 1201 Providing And Laying In Position Cement Concrete Of Specified Grade Of Reinforcement Cement Concreteincluding Curing But Excluding The Cost Of Centring And Shuttering . Finishing And Reinforcement All Work Upto Plinth Level With 1: 1.5 : 3Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1202 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placinng In Position And Binding All Complete Upto Plinth Level Thermomechanically Treated Bars Of Grage Fe-500D Or More 1203 Fabrication, Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. The Size Of The Bend Is Given Below I.Size:Dn 150 Class: C 1204 Ii. Size:Dn 80 Class -C 1205 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. The Size Of The Tee Is Given Below:I. Size : Dn 150 Class - C 1206 Ii. Size : Dn 80Class - C 1207 Cutting Of Hot Dip Galvanized G.I, C-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Is Given Below:I.Size : Dn 150 Class - C ( Heavy ) 1208 Ii.Size : Dn 80 Class - C 1209 Fabrication, Providing And Fitting Of Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is Given Below : Size : Dn 150 Class -C 1210 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Size And Pressure Rating Of The Valve Is Given Below:I. Size : Dn 150 Pn 1.6 / 16 1211 Ii. Size : Dn 80Pn 1.6 / 16 1212 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Size Of Thesize And Pressure Rating Of Nrv Is Given Below:I. Size : Dn 150Pn 1.6 / 16 1213 Ii. Size : Dn 80Pn 1.6 / 16 1214 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. The Arv Shall Have The Following Specifications: I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 20?C To 45?C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. The Job Also Includes Cutting Of 50 Mm Dia Hole In Rising Main And P / F Of50mm Dia.M.S Pipe One Feet Long With One End Flanged Perfectly Adaptable To Flange Of Arv And Other End Welded To 50 Mm Dia Hole Of Rising Main. 1215 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 1216 Fabrication Of Gantry Mechanism / Cgi Shedby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1217 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses, Construction Of Lineretc. Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer , Including Welding And Bolted With Special Shaped Washers Etc. Complete Electric Resistance Or Induction Butt Welded Tubes 1218 Steel Work Welded In Built Up Sections / Framed Work , Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Grating , Frames , Guard Bar , Ladder , Railings, Brackets, Gates And Similar Works 1219 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Featuresgears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below : Make = Reputed Makecapacity=3Ton No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 M 1220 Creation Of Pope Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. The Rating Of H.T Transformer Is Given Below:I. Rating:200 Kva H.T Transformer, 3 Phase ( Level 2 ) Aliminium Wound . 1221 Ii.Rating:63Kva H.T Transformer , 3 Phase ( Level 2 ) Aliminium Wound . 1222 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1223 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1224 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1225 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1226 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1227 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 1228 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1229 P / F Danger Plate With Clamps 1230 Providing And Fixing G.I Barbed Wire For Anti Climbing 1231 Providing And Fixing Of Anti Climbing Devices With Clamps 1232 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1233 Painting Of Poles Red Oxide 1234 Painting Of Poles Aluminum Paint 1235 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1236 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 1237 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1238 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And 200 / 63 Kva Ht Transformer. 1239 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . The Capacity Of Transformer Is Given Below:I. Capacity Of Transformer: 63 Kva 1240 Ii.Capacity Of Transformer: 200 Kva 1241 Fabrication, Providing And Fitting Of Mu-G 75Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43A 1242 Fabrication, Providing And Fitting Of 7.5Hp Or 10 Hp Modularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories:Rest Specification As Per Sbd Clause 43A 1243 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous. Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load. Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Up To Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specificationsthe Capacity Of Voltage Stabliser Is Given Below :I. Capacity Of Voltage Stabliser :150 Kva 1244 Ii.Capacity Of Voltage Stabliser : 30 Kva 1245 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 10Sq.Mm 1246 Size: 35 Sq.Mm 1247 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 35Sqmm, 3.5Core, Lt, 1.1 Kv 1248 Ii ) 120 Sqmm, Single Core, 1.1 Kv 1249 Iii ) 10 Sqmm, 2 Core, Lt, 1.1 Kv 1250 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1251 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 1252 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is To Be Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code. 1253 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is To Be Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Directed. 1254 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1255 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1256 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 1257 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of :Providing Of Tool Kit Consists Of Following Itemscomplete Specifications & Quantity As Per Clause-56 Of Sbd 1258 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Scomplete Specifications & Quantity As Per Clause-57 Of Sbd 1259 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1260 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1261 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1262 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1263 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1264 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. 1265 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.50Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1266 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 10 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Capacity Of D.G Set =30 Kva, Air Cooled 1267 Capacity Of D.G Set = 125 Kva, Water Cooled 1268 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 1269 Carriage Of Soling Stone By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 1270 Carriage Of G.I Pipes 150 Mm Nominal By Mechanical Transport Including Loading, Unloading And Stacking ( Average Distance- 25 Km ) 1271 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanical Transport Including Loading, Unloadingand Stacking ( Average Distance -25Km ) 1272 ( Part B ) Pump House Of Wss Poshwan Gadikhal ( Adv. Cost Rs. 21, 57, 090 / - ) 1273 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 1274 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres:All Kinds Of Soil. 1275 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 1276 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 1277 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1278 Providing And Laying In Position Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1279 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. Columns, Beams , Slabs.1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1280 P / F Of 15Mm Gi Pipe For Internal Work 1281 Providing And Laying Of Stone Soling ( Dully Hand Packed ) On Horizontal Level. 1282 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete In Walls Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1283 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade.Two Or More Coats On New Work 1284 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 1285 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete. 1286 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 1287 Columns, Pillars, Piers, Abutments, Posts And Struts. 1288 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 1289 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 1290 Edges Of Slabs And Breaks In Floors And Walls. Under 20Cms Wide 1291 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 1292 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 1293 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) : 9.1.1 First Classkailwood 1294 Providing 40 X 5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10Mm Diameter Bolts , Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30 X 10 X 15 Cmin 1:3:6 Mix. 1295 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. First Class Kail Wood 35Mm 1296 Providing And Fixing Of Different Sizes , Handles, Haldarwazs, Tower Bolts Incl. Screws. 1297 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 1298 Providing And Fixing 35 Mm Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 1299 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 1300 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 1301 Providing And Fixing Of Ball Bearings For Rolling Shutter. 1302 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 1303 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 1304 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or Strap, 10 Litre Low Level P.V. C. Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests. 1305 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laidon 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 1306 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 1307 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1308 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1309 Providing And Fixing Stainless Steel A Lsi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.L. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required: Kitchen Sink With Drain Board510x1040mm Bowl Depth 250Mm 1310 Providing And Fixing Of 80 Mm Dia Ms Pipe Incl. All Supporting Complete. 1311 Applying Primer Coat On Wood Work. 1312 P / F Of Pvc Tank Incl. Fittings. 1313 Carriage Of Different Materials From Different Sources To Dumping Site Of Work By Mechanical Transport Including Loading, Unloading, Stacking Etc:Cement, And Steel For An Average Lead Of 15 Km 1314 Sand / Bajri For An Average Lead Of 15Km. 1315 Bricks For An Average Lead Of 15 Km. 1316 Stone Soling For An Average Lead Of 15 Km. 1317 12. ( Part A ) Wss Bonibagh Lelhar ( Adv. Cost Rs. 78, 78, 756 / - ) 1318 Supply, Installation, Testing & Commissioning Of 12.5 Hp Non Clogpumping Unit As Per Is5600at Raw Water Stage. Pump: - Type Of Pump :Non –Clogopen Wellsubmersible Vertical Pump Solid Handling Capacity: 20Mm ( Minimum ) Quality Of Water:Raw Waterto Be Handled Meterial Of Construction:Pump Casing: Cast Ironimpeller : Stainless Steelpump Shaft: Stainless Steelmotor Body: Cast Ironsealing :Dual Mech. Seal The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: -Type : Squirrel Cage 3-Phase Induction Motor Rating : Suitable For Above Parameter Method Of Starting: Star – Delta.Frequency : 50Hz + 3%Voltage: 415± 6 %, -15% Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 2Of Technical Anexure Of Sbd 1319 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelmotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%A. Motor Rating=7.5Hpmanufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbd 1320 B. Motor Rating = 12.5 H.P. 1321 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. Tmanufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 8Of Technical Anexure Of Sbd Size : Dn80 Class C 1322 Size : Dn 100 Class C 1323 Size : Dn 125 Class C 1324 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 1325 Providing And Laying Of Stone Soling Hand Packed In Horizontal 1326 Providing And Laying Of 6 Inch Pcc Of 1:4:8 Mix As Mud Mat Including Carriage 1327 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M. 1328 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 1329 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 1330 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1331 Providing And Laying In Position Cement Concrete Of Specified Grade Of Reinforcement Cement Concreteincluding Curing But Excluding The Cost Of Centring And Shuttering . Finishing And Reinforcement All Work Upto Plinth Level With 1: 1.5: 3Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1332 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placinng In Position And Binding All Complete Upto Plinth Level Thermomechanically Treated Bars Of Grage Fe-500D Or More 1333 Providing And Laying Of 12Mm Thick Cement Plusterof 1:4 Mix Including Carriage, All Leads And Lifts 1334 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80Mm 1335 Providing And Fitting Of 300Mm In Length Gi Reducer Bend Flanged On Both Sides, Flange Conforming To Table-17 ( Pn16 ) To Be Fitted With The Column Pipe / Delivery Manifold Of Submersible Pumping Unit To Join Rising-Main And Column Pipe / Delivery Manifold. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes From Inside And Outside Of Pipe To Form Strong Welding Joint.80 Mm - C Class 1336 100 Mm - C Class 1337 125 Mm - C Class 1338 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three End80 Mm - C Class 1339 125 Mm - C Class 1340 Fabrication , Providing And Fitting Of Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Alsoincludes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. T.Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbd The Size Of The Y- Junction Is Given Below : 80 Mm 1341 125Mm 1342 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units.Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd80 Mm Pn 1.6 1343 100 Mm Pn 1.6 1344 125Mmpn 1.6 1345 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbd80 Mm Pn 1.6 1346 100 Mm Pn 1.6 1347 125Mmpn 1.6 1348 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. Manufacture Test Certificate To Be Appended. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 14Of Technical Anexure Of Sbd 1349 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. The Job Involves Following Steel Details:I. In Stringers, Treads, Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required, All Complete 1350 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 1351 Fabrication Of Gantry Mechanism / Cgi Canopyby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1352 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Make = Reputed Makecapacity=3 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 Mrest Ofspecification As Per Cluase 24Of Technical Anexure Of Sbd 1353 Creation Of Pope Mounted, Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva, 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 26Of Technical Anexure Of Sbd 1354 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1355 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1356 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1357 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1358 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1359 Supply, Installation, Errection Of9 Mtrs Long St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 1360 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1361 P / F Danger Plate With Clamps 1362 Providing And Fixing G.I Barbed Wire For Anti Climbing 1363 Providing And Fixing Of Anti Climbing Devices With Clamps 1364 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1365 Painting Of Poles Red Oxide 1366 Painting Of Poles Aluminum Paint 1367 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1368 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 1369 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1370 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And 100 Kva Ht Transformer. 1371 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 100Kva 1372 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:-= 01 Nocurrent Rating = 100 Amp.C ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 100 Ae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 20 Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 20-32 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1373 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Rest Oftechnical Specification As Per Cluase 45Of Technical Anexure Of Sbda. 40 Kva 1374 B. 30 Kva 1375 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 16 Sq.Mm 1376 Size: 6 Sq.Mm 1377 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 50 Sqmm, 3.5 Core 1378 Ii ) 10 Sqmm, 2 Core 1379 Providing And Fitting Of Three / Single-Core, Copper Pvc Insulated Cable, Xlpe Armoured Conforming To Is: 7089 Part 1St For Intedrnal Connectionscrimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Single Core Pvc Insulated 25Sqmm 1380 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1381 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) Rest Of The Specicifications Are As Per Clause-49 Oftechnical Annexure Of Sbd 1382 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1383 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1384 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1385 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1386 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverterincluding Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1387 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 1388 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items Asspecicifications Are As Per Clause-56 Oftechnical Annexure Of Sbd 1389 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1390 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1391 Providing Of Good Quality Convenince And Utility Items Specicifications Are As Per Clause-57 Oftechnical Annexure Of Sbd 1392 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1393 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1394 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1395 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1396 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Mm And Ms Sheet Of 1 Mmthick 1397 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.1.25 Mm Thick With Zinc Coating Not Less Than 350 Gram / M2 1398 Providing Ridges Or Hips Of Width 60 Cm Overall With Plain G.S Sheets Fixed Withpolymer Coated J- Or L- Hooks , Bolts And Nuts 8 Mm Dia. G.I Limpet Andbitumen Washers Complete0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / Sq.M 1399 Providing, Cutting, Fitting And Welding Green Pvc Coated Welded Wire Fencewith Squaremesh -2And Wire Diameter 1.5 Mmto Be Fitted Onall Openverticalsides Of The D.G Set Shed. The Job Includes Cutting, Welding, Hoisting Etc As Per Site Requirement. 1400 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. Rating: 62.5 Kva, Water Cooled. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 68Of Technical Anexure Of Sbd 1401 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole, 415 V, 50 Kv Breaking Capacity Housed Properly In Cubical Enclosure Made Upof M.S Swg – 16 Sheet Steel ( Outdoor Type ) Manufacture Test Certificate To Be Appended Rest Ofspecification As Per Cluase 68Of Technical Anexure Of Sbd 1402 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 1403 Carriage Of Soling Stone By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 1404 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 1405 Carriage Of Gi Pipes 100Mm Diameter By Mechanicaltransportincluding Loading , Unloadingand Stacking ( Average Distance -25Km ) 1406 Carriage Of Gi Pipes 125Mm Diameter By Mechanicaltransportincluding Loading , Unloadingand Stacking ( Average Distance -25Km ) 1407 ( Part B ) Pump House Of Wss Bonibagh Lelhar ( Adv. Cost Rs. 27, 92, 421 / - ) 1408 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 1409 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 1410 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1411 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. Columns, Beams , Slabs.1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1412 Providing And Laying Of Stone Soling ( Dully Hand Packed ) On Horizontal Level. 1413 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete In Foundations Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1414 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete In Foundations Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. For Slabs, Beams:1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1415 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 1416 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade.Two Or More Coats On New Work 1417 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 1418 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 1419 Columns, Pillars, Piers, Abutments, Posts And Struts. 1420 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 1421 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 1422 Edges Of Slabs And Breaks In Floors And Walls. Under 20Cms Wide 1423 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. First Class Kail Wood 35Mm 1424 Providing And Fixing Of Hingesof Different Sizes, Handles, Haldarwazs, Incl. Screws. 1425 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 1426 Providing And Fixing Of First Class Kail Wood. 1427 Providing And Fixing 35 Mm Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 1428 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 1429 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 1430 Providing And Fixing Of Ball Bearings For Rolling Shutter. 1431 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone ( Quarry ) 1432 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 1433 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or Strap, 10 Litre Low Level P.V. C. Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests. 1434 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laidon 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 1435 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 13.88.1 1 Mm Thick 1436 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1437 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1438 Providing And Fixing Stainless Steel A Lsi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.L. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required: Kitchen Sink With Drain Board510x1040mm Bowl Depth 250Mm 1439 Providing And Fixing Of 80 Mm Dia Ms Pipe Incl. All Supporting Complete. 1440 Ornamental Structural Steel Work Welded In Grill And Stair. 1441 Filling Nallah Muck, Khakh Bajri Incl. All Carriages Avg. Lead 25 Km. 1442 Applying Primer Coat On Wood Work. 1443 Providing And Fixing Of Gi Pipes With Fittings Incl. Cutting And Making Good The Same. 1444 P / F Of Pvc Tank Incl. Fittings. 1445 Wiring Of Light With 1.5 Sqm Pvc Insulated Multistrand Copper Conductor Single Core Cable Of Havels / Polycab / Alba / Hpl Make In Surface / Recessed Medium Class Pvc Conduit With 6 Amp One Way Modular Series Switch. 1446 Wiring For 16 Amp Power Scoket Point With 3X4 Sq. Mm ( P+N+E ) Pvc Insulated Multistrand Copper Conductor Single Core Cable Of Havels / Polycab / Alba / Hpl Make In Surface / Recessed Medium Class Pvc Conduit With 16 Amp Switch / Socket Modular Series Switch With Plate With Box Recessed In Walls Incl. Refacing Of Walls, Two Points Are Taken On One Circuit From D Box ( Excl. Cost Of Conduit ) . 1447 Wiring For 6 Amp Power Scoket Point With 3X2.5 Sq. Mm ( P+N+E ) Pvc Insulated Multistrand Copper Conductor Single Core Cable Of Havels / Polycab / Alba / Hpl Make In Surface / Recessed Conduit Medium Class Pvc Conduit With 1X2.5 Sq. Mm Frls Pvc Insulated Multistrand Copper Conductor With Modular Series Switch With Plate Boxes And Two No. 6 Amps 5 Pin Sockets ( Excl. Cost Of Conduit ) . 1448 Supply And Laying Of Pvc Medium Grade Conduit To Be Laid On Surface With All Allied Accures Like Bends, Tees Etc 25 / 31Mm Dia. 1449 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep Heavy Duty Ceiling Fans Of Crompton Greaves / Havels Or Its Eqquilant Make Complete With Ceiling Rose Connection Wire. 1450 Supply And Fixing Of 350 Watt Electric Fan Dimmer Of Roma Series Of Anchor. 1451 63 Amp 1452 40 Amp 1453 32 Amp 1454 P / F Of Head Points In 3 / 20 Pvc Insulated Multistrand Copper Conductor Of Single Core Cable Of Havels / Polycab Make In Surface Recessed Conduit Medium Class Pvc Conduit. 1455 P / F Of Service Line. 1456 P / F Of 300 Mm Square Shutter Type Exaust Fan Of Crompton Greaves Or Havels Make. 1457 Carriage Of Different Materials From Different Sources To Dumping Site Of Work By Mechanical Transport Including Loading, Unloading, Stacking Etc:Cement, And Steel For An Average Lead Of 20 Km 1458 Sand / Bajri For An Average Lead Of 20 Km. 1459 Bricks For An Average Lead Of 15 Km. 1460 Stone Soling For An Average Lead Of 10 Km. 1461 13. ( Part A ) Wss Banderpora New ( Adv. Cost Rs. 99, 76, 017 / - ) 1462 Supply, Installation, Testing & Commissioning Of 15 Hpnon Clogpumping Unit As Per Is 5600 At Raw Water Stage. Pump: - Type Of Pump :Non –Clogopen Wellsubmersible Vertical Pump Solid Handling Capacity: 20Mm ( Minimum ) Quality Of Water:Raw Waterto Be Handled Meterial Of Construction:Pump Casing: Cast Ironimpeller : Stainless Steelpump Shaft: Stainless Steelmotor Body: Cast Ironsealing :Dual Mech. Seal The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: -Type : Squirrel Cage 3-Phase Induction Motor Rating : Suitable For Above Parameter Method Of Starting: Star – Delta.Frequency : 50Hz + 3%Voltage: 415± 6 %, -15% Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 2Of Technical Anexure Of Sbd 1463 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034 With Following Specification Are As Under :Pump : Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Mixed Flow.Type Of Fluid To Be Handled=Clear Watermaterial Of Construction:Impeller= Stainless Steelpump Shaft = Stainless Steel Ss 410.Pump Casing = Cast Iron / Stainless Steelmotor:-Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 1Of Technical Anexure Of Sbda. Motor Rating=10 Hp 1464 B. Motor Rating = 12.5 Hp 1465 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. Tsize : Dn80class: C ( Heavy ) .Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 8 Of Technical Anexure Of Sbd .Size : Dn80 Class C 1466 Size : Dn 100 Class C 1467 Size : Dn 125 Class C 1468 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 1469 Providing And Laying Of Stone Soling Hand Packed In Horizontal Including Carriage Of 6 Km 1470 Providing And Laying Of 6 Inch Pcc Of 1:4:8 Mix As Mud Mat Including Carriage 1471 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M And Lift Upto 1.5M. 1472 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 1473 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 1474 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1475 Providing And Laying In Position Cement Concrete Of Specified Grade Of Reinforcement Cement Concreteincluding Curing But Excluding The Cost Of Centring And Shuttering . Finishing And Reinforcement All Work Upto Plinth Level With 1: 1.5 : 3Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1476 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placinng In Position And Binding All Complete Upto Plinth Level Thermomechanically Treated Bars Of Grage Fe-500D Or More 1477 Providing And Laying Of 12Mm Thick Cement Plusterof 1:4 Mix Including Carriage, All Leads And Lifts 1478 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80Mm 1479 Fabrication, Providing And Fitting Long Raduis Bend / Elbowto Be Fabricated Out Ofg.I Pipe Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Class: C 1480 Providing And Fitting Of 300Mm In Length Gi Reducer Bend Flanged On Both Sides, Flange Conforming To Table-17 ( Pn16 ) To Be Fitted With The Column Pipe / Delivery Manifold Of Submersible Pumping Unit To Join Rising-Main And Column Pipe / Delivery Manifold. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes From Inside And Outside Of Pipe To Form Strong Welding Joint.80 Mm - C Class 1481 100 Mm - C Class 1482 125 Mm - C Class 1483 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. 80 Mm - C Class 1484 100 Mm - C Class 1485 125 Mm - C Class 1486 Fabrication, Providing And Fitting Of Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Alsoincludes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Usingreputed Makeelectrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding . The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is125mm 1487 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 12Of Technical Anexure Of Sbd80 Mm Pn 1.6 1488 100 Mm Pn 1.6 1489 125Mmpn 1.6 1490 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 13Of Technical Anexure Of Sbd80 Mm Pn 1.6 1491 100 Mm Pn 1.6 1492 125Mmpn 1.6 1493 Providing, Fitting , Testing And Commissioning Of50mm Diameter Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main. Manufacture Test Certificate To Be Appended. Manufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 14Of Technical Anexure Of Sbd 1494 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. The Job Involves Following Steel Details:I. In Stringers, Treads, Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required, All Complete 1495 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -8No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No. 1496 Fabrication Of Gantry Mechanism / Cgi Canopy By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1497 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyof Reputed Makehaving Following Featurescapacity=3 Ton ( P ) No. Of Load Chain Falls = 2 Or Above Min. Height Of Lift = 6 Mmanufacture Test Certificate To Be Appended.Rest Ofspecification As Per Cluase 24Of Technical Anexure Of Sbd 1498 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 26 Of Technical Anexure Of Sbd 1499 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1500 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1501 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1502 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1503 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1504 Supply, Installation, Errection Of9 Mtrs Long St- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Required. The Job Further Includes Gi Wire Earthing Of Pole As Per Rec Standard. 1505 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1506 P / F Danger Plate With Clamps 1507 Providing And Fixing G.I Barbed Wire For Anti Climbing 1508 Providing And Fixing Of Anti Climbing Devices With Clamps 1509 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1510 Painting Of Poles Red Oxide 1511 Painting Of Poles Aluminum Paint 1512 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1513 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 1514 Providing And Fitting Of Anchoring Clampscomprising Clamp Body , Plastic Wedge, Steel Bill Bracket , Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1515 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And 100 Kva Ht Transformer. 1516 Providing And Fitting Of Lt Distribution Box For Ht Transformer With Mccb For Incomer And Sfu For Out Going Circuits . Capacity Of Transformer: 100Kva 1517 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:-= 01 Nocurrent Rating = 100 Amp.C ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 100 Ae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 20 Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 20-32 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 D Oftechnical Annexure Of Sbd 1518 Providing, Fitting, Testing And Commissioning Ofvoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated And Oven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Rating::40Kvarest Oftechnical Specification As Per Cluase 45 Of Technical Anexure Of Sbd 1519 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. Size: 16 Sq.Mm 1520 Size: 6 Sq.Mm 1521 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles Of Dowel’S Make And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.I ) 50 Sqmm, 3.5 Core 1522 Ii ) 10 Sqmm, 2 Core 1523 Providing And Fitting Of Three / Single-Core, Copper Pvc Insulated Cable, Xlpe Armoured Conforming To Is: 7089 Part 1St For Intedrnal Connectionscrimping, Taping Etc.Note:- The Cable Terminal Ends For Connection To Switchgear At Various Requisite Points Shall Be Al. Thimbles And Of Appropriate Size And Connected By Hydraulic Crimp Tool Only.Single Core Pvc Insulated 25Sqmm 1524 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards.Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1525 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) Rest Oftechnical Specification As Per Cluase 49 Of Technical Anexure Of Sbd 1526 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Oftechnical Specification As Per Cluase 50 Of Technical Anexure Of Sbd 1527 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole .Rest Oftechnical Specification As Per Cluase 51` Of Technical Anexure Of Sbd 1528 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1529 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1530 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1531 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.The Rubber Mats Shall Be Accepted With Manufacturers Test Certificate. 1532 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items Aspertechnical Specification As Per Cluase 56 Of Technical Anexure Of Sbd 1533 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1534 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1535 Providing Of Good Quality Convenince And Utility Items Specicifications Are As Per Clause-57 Oftechnical Annexure Of Sbd 1536 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1537 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1538 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1539 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1540 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Mm And Ms Sheet Of 1 Mmthick 1541 Providing Corrugated G.S Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts 8 Mm Dia. Diameter With Bitumen And G.I Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.1.25 Mm Thick With Zinc Coating Not Less Than 350 Gram / M2 1542 Providing Ridges Or Hips Of Width 60 Cm Overall With Plain G.S Sheets Fixed Withpolymer Coated J- Or L- Hooks , Bolts And Nuts 8 Mm Dia. G.I Limpet Andbitumen Washers Complete0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / Sq.M 1543 Providing, Cutting, Fittingand Welding Green Pvc Coated Welded Wire Fencewith Squaremesh -2And Wire Diameter 1.5 Mmto Be Fitted Onall Openverticalsides Of The D.G Set Shed . The Job Includes Cutting, Welding, Hoisting Etc As Per Site Requirement. 1544 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments. Rating: 62.5Kva , Water Cooled Manufacture Test Certificate To Be Appended. Rest Ofspecification As Per Cluase 66Of Technical Anexure Of Sbd 1545 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 400A Mccb 3- Pole, 415 V, 50 Kv Breaking Capacity Housed Properly In Cubical Enclosure Rest Ofspecification As Per Cluase 67 Of Technical Anexure Of Sbd 62.5 Kva Water Cooled 1546 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) 1547 Carriage Of Soling Stone By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 1548 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 1549 Carriage Of Gi Pipes 100Mm Diameter By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 1550 Carriage Of Gi Pipes 125Mm Diameter By Mechanicaltransportincluding Loading, Unloadingand Stacking ( Average Distance -25Km ) 1551 ( Part B ) Pump House Of Wss Banderpora New ( Adv. Cost Rs. 21, 57, 090 / - ) 1552 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil ( 1 Meter From Cutting Edge ) . 1553 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres:All Kinds Of Soil. 1554 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . 1555 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 1556 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1557 Providing And Laying In Position Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 1558 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. Columns, Beams , Slabs.1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1559 P / F Of 15Mm Gi Pipe For Internal Work 1560 Providing And Laying Of Stone Soling ( Dully Hand Packed ) On Horizontal Level. 1561 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete In Walls Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level:1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 1562 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade.Two Or More Coats On New Work 1563 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level:Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 1564 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete. 1565 Centering, Shuttering Including Strutting, Propping Etc And Removal Of Form For:Foundation, Footings, Bases Of Columns Etc. For Mass Concrete. 1566 Columns, Pillars, Piers, Abutments, Posts And Struts. 1567 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 1568 Suspended Floors, Roofs, Landings, Balconies, And Access Platform. 1569 Edges Of Slabs And Breaks In Floors And Walls. Under 20Cms Wide 1570 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 1571 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 1572 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) : 9.1.1 First Classkailwood 1573 Providing 40 X 5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30 X 10 X 15 Cmin 1:3:6 Mix. 1574 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. First Class Kail Wood 35Mm 1575 Providing And Fixing Of Different Sizes, Handles, Haldarwazs, Tower Bolts Incl. Screws. 1576 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 1577 Providing And Fixing 35 Mm Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 1578 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 1579 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 1580 Providing And Fixing Of Ball Bearings For Rolling Shutter. 1581 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 1582 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 1583 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or Strap, 10 Litre Low Level P.V. C. Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests. 1584 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laidon 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 1585 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 1586 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1587 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1588 Providing And Fixing Stainless Steel A Lsi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.L. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required: Kitchen Sink With Drain Board510x1040mm Bowl Depth 250Mm 1589 Providing And Fixing Of 80 Mm Dia Ms Pipe Incl. All Supporting Complete. 1590 Applying Primer Coat On Wood Work. 1591 P / F Of Pvc Tank Incl. Fittings. 1592 Carriage Of Different Materials From Different Sources To Dumping Site Of Work By Mechanical Transport Including Loading, Unloading, Stacking Etc:Cement, And Steel For An Average Lead Of 15 Km 1593 Sand / Bajri For An Average Lead Of 15Km. 1594 Bricks For An Average Lead Of 15 Km. 1595 Stone Soling For An Average Lead Of 15 Km. 1596 14. ( Part A ) Wss Tenghar Payer ( Adv. Cost Rs. 76, 67, 592 / - ) 1597 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 12000 Gph, 100-105 Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Ironthe Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:-Suitable For Above Parameters / 40Hpc ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Delta Rpm= 1440 The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site.Manufacturers Test Cerrtificateto Be Appended. 1598 Fabrication, Providing And Fitting Of Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 125 Mm 1599 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. 1600 Providing / Supplying And Fitting Of 125Mm Dia.G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Bconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 1601 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1602 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 1603 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M Ad Lift Upto 1.5M. Quantity : 90% Of Item No: 04 1604 Providing And Laying Of Soling Stone Including Manual Compaction 1605 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation, Footings, Bases For Columns 1606 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 1.5 : 3 Mix ( 1 Cement , 1.5 Coarse Sand , 3 Graded Stone Aggregate 20Mm Nominal Size ) 1607 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix1:4 ( 1 Cement : 4 Fine Sand ) 1608 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 125 Mm Dia. G.I C-Class Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. 1609 Providing And Fitting Of, Dn 125 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1610 Providing And Fitting Ofdn 125 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1611 Providing, Fitting , Testing And Commissioning Of 50Mm Diaarv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main .. . The Arv Shall Have The Following Specifications: -I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 70Oc To 550 C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. 1612 Fabrication , Providing And Fitting Of125mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofclassb Gi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 1613 Cutting Of Hot Dip Galvanized G.I Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter.The Job Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table - 17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T-Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includesproviding And Fitting Of Nuts And Bolts ( Conforming To Is:1363Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Is Dn 125, Class- B 1614 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primercomplete In All Respects As Per Drawing Appended. 1615 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :Make= Reputed Makecapacity=3Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift = 6 Mmanufacturers Test Certificate To Be Appended. 1616 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type63kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 1617 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1618 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1619 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1620 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1621 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1622 11Kv Polymeric Composite Disc Insulator 12Kv, Min Failing Load 45 Kn, Lighting Impulse 75 Kv Positive And 80 Kv Negative, Creepage Distance 320Mm 1623 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories, Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 1624 Earthing Complete By Gi Pipe 40Mm3 Mtr Long Through Gi Strip 25X 3Mm 1625 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1626 P / F Danger Plate With Clamps 1627 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 1628 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1629 Painting Of Poles Red Oxide 1630 Painting Of Poles Aluminum Paint 1631 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1632 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 1633 Providing And Fitting Ofsuspention / Tension Clamp With Eye Hook 1634 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1635 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits . The Capacity Of H.T Transformeris 63 Kva 1636 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed.All Kinds Of Soil 1637 Providing And Laying Of Soling Stone Including Manual Compaction 1638 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1639 P / I / T / C Oflt 3 Phase 4 Wire Prodigy Meter Of Capacity 40-200 Amp 415 V, 50 Hz Preferebly Of Secure Make With All Accessories & Fittings , Cabling As Per Site Requirement.Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 1640 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber:200 Ampres Copperb ) Main Circuit Breaker ( Incomer Mccb ) : 4 Poleqty:- = 02 Nocurrent Rating = 250 Amp. 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =200 Ampered ) Motor Back-Up Protection Mccb: 3 Poleqnty = 2 No’Scurrent Rating= 200 A, 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 75Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 66-110 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1641 Providing, Fitting, Testing And Commissioning Of 75 Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specifications. 1642 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade 50 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 1643 Providing And Fitting Of 35 Mm Square Single Core Copper Cable For Intwrconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Required Thimbling 1644 P / I Of Earthing Station For 63Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1645 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 1646 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 1647 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 1648 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In-Charge. 1649 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1650 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1651 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1652 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Safe Volt / Jyotithe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 1653 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Ii. Double Ended Ring Spannerschrome Platedof Size Inmm 6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Iii. Allen Key Set Black Finish Of Size In Mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Make – Tapariaeach – 2 No.Iv. Combination Pliersinsulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Make – Tapariaeach – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vii. Insulated Screw Drivers ( Make – Taparia ) Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 0275 3 1.6 X0.4 02100 3 3 X 0.4 02125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg , 340 Gm , 600 Gm –Each – 1No. Make Taparia. Ix. Heavy Duty Pipe Wrench Length In Mm- 200, 300, 600 Each – 01 No. Make Taparia.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. ( Fluke / Meco / Scemens / Mastech ) Xii. Digital Clamp Testercapable To Measure Up To 400A-1 No.Xiii. Hack Saw Framewith Hack Saw Blade – 01 No.Xiv. S-16Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. Make Taparia 1654 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1655 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting, Fixing All Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1656 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 1657 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1658 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1659 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1660 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1661 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs. 1662 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase 62.5Kva Water Cooled / Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.The Dg Set Is Required To Be Fitted And Tested On Load At Sitethe D.G Set Shall Have The Following Technical Specification.Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Also Includes The Cost On Account Of Hsd And Skilled Operator Required For Operation Of D.G Set For A Period Of 1 Hours Continuously During Its Testing And Commissioning Of D.G Set At Site. The Capacity Of The D.G Set Is Given Below:Caspacity:62.5 Kva, Rated Spped 1500 Rpm, Class Of Insulation H, Enclosure Ip23 , Aspiration Turbo Cahrged , Rated Bhp 62.5Kva Manufacturers Test Certificate To Be Appended.Rest Of Technical Specification As Per Technical Annexure Of Sbd 1663 ( Part B ) Pump House Of Wss Tenghar Payer ( Adv. Cost Rs. 16, 70, 022 / - ) 1664 Earth Work In Excavation By Manual Means Over Areas Exceeding 30 Cms & Upto 5 M In Depth 1.5M In Width As Well As 10 Sqm. On Plan, Disposal Of Excavated Earth Upto 1 M, Disposed Earth To Be Levelled & Neatly Dressed ( All Kinds Of Soils ) 1665 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete Andfilling Of Stone In Rooms ( Dully Hand Packed ) 1666 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 1667 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:2:4 Stone Agg. 20Mm Nominal Size 1668 P / Lin Position Specified Grade Ofcement Cencrete ( 1:3:6 ) Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level Stone Agg. 20Mm Nominal Size 1669 Providing & Laying Damp-Proofcourse 40 Mm Thickwith Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Agg 12.5 Mm Nominal Size ) And Curing Complete 1670 Brickwork In Common Burnt Clay Fps Bricks Of Class Designed 75 In Foundation In 1:4 Mix 1671 Extra For Brick Work In Superstructure Above Plinth Level Upto Floor V Level. ( By Manual Means ) 1672 P / L Of Reinforced Cement Concrete 1:1.5:3 Mix With 20-Mm Nominal Size Aggregates Includingcuring But Excluding Cost Of Shuttering 1673 Providing And Fixing Of Pannalled Wrought Framed Chowkats In Wood Work Of 2Nd Class Kail Wood 1674 Providing And Fixing Of Pannalled / Pannelled Or Glazed Shutters 35-Mm Thick Of 2Nd Class Kailwood Including 4.0 Mm Thick Glasss Panes 1675 Providing And Fixing 35Mm Thick Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge2nd Class Deodar Wood 1676 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete. 1677 Providing / Fixing Of Hinges Of Sizes, Handles, Haldarwazs, Latches Incl. Screws Of Sorts All Complete Job. 1678 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1And M.S. Top Cover Of Required Thickness For Rolling Shutter80x1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover 1679 Ball Bearing 1680 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 1681 Centering And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work For Founadtions, Footings, Bases Of Columns For Mass Concrete 1682 Lintel 1683 Slab 1684 Edges 1685 P / L12-Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement : 4 Coarse Sand ) 1686 Providing And Fixing Of Sanitary Items I.Eindian Type Wc, Flusing Cistern , Wash Basin, Beb Cocks, 15-Mm Dia G.I Pipe With Fittings, Pvc Waste Pipes, Sink To Kitchen, 1000 Ltr Pvc Tank And 35 Ltr Gyser Etc 1687 Provision For Construction Of Ring Type ( Four Compartment ) Septic Tankof Depth 10 Feet Each Includingcost Of Earthwork Excavation, Cost Of Rings, Iron Cover, Pvcprince Type B-Pipe, P Traps And Connecting Of Septic Tank With Soakage Pits Including All Accessories Whichever Is Required For Completion Of Workwith Ci Lids. Complete 1688 Provision For Construction Of One Compartment Soakge Pit Of Depth 10 Feetcost Of Earthwork Excavation, Cost Of Rings, Iron Cover Etc Complete Job 1689 Providing And Fixing Ist Quality Ceramic Glazedtiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. ( Kitchen / Bathroom ) 1690 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1691 Applying Priming Coat With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 1692 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Color To Give An Even Shade Two Or More Coat Icluding Priming Coat ( Walls Interior And Exterior And Wood Work ) 1693 Providing And Fitting Of Electricfication To The Operator Quarter 1694 Steel Work Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position Amd Applying A Priming Coat Of Approved Steel Primer Using Structural Steel 1695 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1696 Eves Boardings 1697 Ridges Or Hips Of Width 60Cm Overall Width 0.63 Mm Thick 1698 Providing, Fixing And Installation Of Electric Ceiling Fan Of Approved Brand And Manufacturer With All Carriage Complete 1699 Providing, Fixing And Installation Of Exhaust Fan Of Approved Brand And Manufacturer With All Carriage Complete 1700 Carriage Of Materails By Mech.Transport, From Source To Site Of Work Sand AndStone Agg.For An Avg Lead Of 15 Km 1701 Cement From Div. Store Awantipora For An Avg Lead Of15 Km 1702 Bricks For An Avg. Lead Of 26 Km 1703 15. ( Part A ) Wss N.C. Naina ( Stage 1St & Stage 2Nd ) ( Adv. Cost Rs. 78, 85, 652 / - ) 1704 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 6000Gph , 35-40Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Iron4.Rpm- 14440The Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parameters But Not Less Than 15 Hpc ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Deltah ) Rpm-14440 The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site. Manufacturers Test Cerrtificateto Be Appended. 1705 Fabrication, Providing And Fitting Of 80 Mm Dia Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 80 Mm 1706 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. 1707 Providing / Supplying And Fitting Of G.I Flanged 80 Mmrising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Cconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 1708 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1709 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 1710 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M Ad Lift Upto 1.5M. 1711 Providing And Laying Of Soling Stone Including Manual Compaction 1712 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation , Footings , Bases For Columns 1713 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 1.5 : 3 Mix ( 1 Cement , 1.5 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1714 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix1:4 ( 1 Cement : 4 Fine Sand ) 1715 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 80Mm Dia. G.I Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. Rest Of Specificationas Per Sbd 1716 Providing And Fitting Of, Dn 80 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1717 Providing And Fitting Ofdn 80 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1718 Providing, Fitting , Testing And Commissioning Of50 Mm Dia Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main .. . The Arv Shall Have The Following Specifications: -I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 70Oc To 550 C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. 1719 Fabrication , Providing And Fitting Of80mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofclassb Gi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 1720 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 80 , Class-C 1721 Fabrication Of Gantry Mechanism ( 02 No. ) By Way Of Providing Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primercomplete In All Respects As Per Drawing Appended. 1722 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features.Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :I. Make= Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift= 6 Mmanufacturers Test Certificate To Be Appended.Rest As Per Specifications Of Sbd 1723 Supply, Installation, Testing & Commissioning Of Non-Clog Pumping Unit As Per Is 5600 At Raw Water Stage. Pump: - Type Of Pump:Non–Clogopen Wellsubmersible Vertical Pump • Solid Handling Capacity: 20Mm ( Minimum ) • Quality Of Water:Raw Water Of River To Be Handledq=6000 Gph& H=35-40 Mmaterial Of Construction:• Pump Casing: Cast Iron • Impeller : Stainless Steel• Pump Shaft: Stainless Steel • Motor Body: Cast Iron• Sealing :Dual Mech. Seal ? The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: -• Type : Squirrel Cage 3-Phase Induction Motor• Rating : Suitable For Above Parameter • Method Of Starting: Star – Delta. • Frequency : 50Hz + 3%• Voltage : 415± 6 %, -15%• Class Of Insulation: Suitable For Above Rating.• Sealingdual Mech. Seal. Provided With Thermal And Overload Protectionthe Motor Shall Be Made Of Corrosion Resisting Materials To Resist Corrosion Under Normal Conditions And The Motor Shall Have A Name Plate Depicting All Specifications Dual Mechanical Seals ( 01 No ) And Bearings ( 02 No ) For The Pumping Unit Must Be Provided As Spare Parts For Preventive Maintenance By The Firm. For Each Pumping Unit Note: Test Certificate Having The Serial No. Of The Pumping Unit Along With The Performance Curve In Duplicate From The Manufacturer Must Be Produced On Delivery Of The Item. Motor Rating :15 Hp Or Suitable For Above Parameters 1724 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type 25 Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 1725 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1726 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1727 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1728 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1729 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1730 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories, Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard 1731 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1732 P / F Danger Plate With Clamps 1733 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 1734 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1735 Painting Of Poles Red Oxide 1736 Painting Of Poles Aluminum Paint 1737 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1738 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 1739 Providing And Fitting Of Suspension / Tension Clamp With Ieye Hooks Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab C Cable. 1740 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1741 P / I Of Earthing Station For 25 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1742 Earthing Complete By Gi Pipe 40Mm Or Gi Rod 3 M Long Through Gi Strip 25X3mm 1743 Providing And Fitting Of63a Tpn Switch Disconnector Fuse Unit.. The Capacity Of H.T Transformeris 25Kva 1744 P / I / T / C Of Lt 3 Phase, 4 Wire, Prodigy Meter Of Capacity 40-200 Amp, 415 V, 50 Hz Preferably Of Secure Make With All Accessories & Fittings, Cabling Required As Pe Site Requirement.Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 1745 Earth Work In Excavation By Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed.All Kinds Of Soil 1746 Providing And Laying Of Soling Stone Including Manual Compaction 1747 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2Coarse Sand , 4Graded Stone Aggregate 20Mm Nominal Size ) 1748 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:- = 02 Nocurrent Rating = 160 Amp. 4 Pole 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 100 A 3 Pole 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 20 H Hp ( Mug 20 H ) Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 28-42 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 D Oftechnical Annexure Of Sbd 1749 Providing, Fitting, Testing And Commissioning Of 30 Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage :175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specifications. 1750 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade 50 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 1751 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 With Thimbling 1752 Providing And Fitting Of16 Square Mm 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. 1753 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 1754 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 1755 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 1756 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In-Charge. 1757 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1758 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1759 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1760 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Safe Volt / Jyotithe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 1761 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Ii. Double Ended Ring Spannerschrome Platedof Size Inmm 6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Iii. Allen Key Set Black Finish Of Size In Mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Make – Tapariaeach – 2 No.Iv. Combination Pliersinsulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Make – Tapariaeach – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vii. Insulated Screw Drivers ( Make – Taparia ) Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 02 75 3 1.6 X0.4 02100 3 3 X 0.4 02 125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02 200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg , 340 Gm , 600 Gm –Each – 1No. Make Taparia. Ix. Heavy Duty Pipe Wrench Length In Mm- 200, 300, 600 Each – 01 No. Make Taparia.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. ( Fluke / Meco / Scemens / Mastech ) Xii. Digital Clamp Testercapable To Measure Up To 400A-1 No.Xiii. Hack Saw Framewith Hack Saw Blade – 01 No.Xiv. S-16Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. Make Taparia 1762 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1763 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1764 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 1765 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1766 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1767 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1768 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1769 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 1770 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Ammendments.The Dg Set Is Required To Be Fitted & Tested On Load At Site. The Dg Set Shall Have The Following Specifications. Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Includes Cost On Aaccount Of Hsd & Skilled Operator Required For Operation Of Dg Set For A Period Of One Hour Contineously During Its Testing & Commissioning At Site.The Canopy Of The D. G. Set Shall Be Fabricated Out Of M. S. Sheet Of Required Gauge So As To Withstand The Snow Load Etc, Duly Painted. Rating:25Va, Aircooled Dg Set Rated Speed 1500 Rpm, Engineaspiration Turbo Chargedmanufacturers Test Certificate To Be Appended.Rest Oftechnical Specification As Perclause 66 Of Technical Anexure Of Sbd 1771 Stage 2Nd Of Wss N.C. Naina 1772 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 6000 Gph, 30-35 Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Iron4. Rpm-1440The Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parameters Not Less Than 15 Hpc ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Delta H ) Rpm-1440 The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site. Manufacturers Test Certificate To Be Appended. 1773 Fabrication, Providing And Fitting Of 80 Mm Dia Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 80 Mm 1774 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. 1775 Providing / Supplying And Fitting Of G.I Flanged 80 Mmrising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Cconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 1776 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1777 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 1778 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M Ad Lift Upto 1.5M. 1779 Providing And Laying Of Soling Stone Including Manual Compaction 1780 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation, Footings, Bases For Columns 1781 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 1.5 : 3 Mix ( 1 Cement , 1.5Coarse Sand , 3 Graded Stone Aggregate 20Mm Nominal Size ) 1782 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 1783 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 80Mm Dia. G.I Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. Rest Of Specificationas Per Sbd 1784 Providing And Fitting Of, Dn 80 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1785 Providing And Fitting Ofdn 80 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1786 Providing, Fitting , Testing And Commissioning Of50 Mm Dia Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main .. . The Arv Shall Have The Following Specifications: -I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 70Oc To 550 C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. 1787 Fabrication , Providing And Fitting Of80mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofclassb Gi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 1788 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 80 , Class-C 1789 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1790 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Featuresgears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :I. Make= Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift= 6 M 1791 Supply, Installation, Testing & Commissioning Of Open Well Pumping Units As Per Is 14220 At Filter Water Stage. Pump: - • Type Of Pump:Open Wellsubmersible Pump ( Vertical ) • Quality Of Waterto Be Handled :Filter Watermeterial Of Construction:• Pump Casing:Cast Iron• Impeller :Ss • Pump Shaft:Stainless Steel• Motor Body: Cast Iron • Sealing :Dual Mech. Seal ? The Bowl Plate Shall Be Provided With Name Plate Giving Complete Specifications ? Motor: -• Rating : 10 Hp• Method Of Starting: Star – Delta.• Frequency: 50Hz + 3%• Voltage : 415 + 6 %, -15% • Class Of Insulation: Suitable For Above Rating. • Sealing:Dual Mech. Seal. Provided With Thermal And Overload Protection.The Motor Shall Be Made Of Corrosion Resisting Materials To Resist Corrosion Under Normal Conditions And The Motor Shall Have A Name Plate Givingcomplete Specificationsdual Mechanical Seals ( 01 No ) And Bearings ( 02 No ) For Each Pumping Unit Must Be Provided As Spare Parts For Preventive Maintenance By The Firm.Note: Test Certificate Having The Serial No. Of The Pumping Unit Along With The Performance Curve In Duplicate From The Manufacturer Must Be Produced On Delivery Of The Item. Motor Hp= 10 Hp 1792 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type 25Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 1793 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1794 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1795 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1796 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1797 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1798 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 1799 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1800 P / F Danger Plate With Clamps 1801 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 1802 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1803 Painting Of Poles Red Oxide 1804 Painting Of Poles Aluminum Paint 1805 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1806 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 1807 Providing And Fitting Of Suspension / Tension Clamp With Ieye Hooks Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab C Cable. 1808 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1809 P / I Of Earthing Station For 25 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1810 Earthing Complete By Gi Pipe 40Mm Or Gi Rod 3 M Long Through Gi Strip 25X3mm 1811 Providing And Fitting Of63a Tpn Switch Disconnector Fuse Unit.. The Capacity Of H.T Transformeris 25Kva 1812 P / I / T / C Of Lt 3 Phase, 4 Wire, Prodigy Meter Of Capacity 40-200 Amp, 415 V, 50 Hz Preferably Of Secure Make With All Accessories & Fittings, Cabling Required As Pe Site Requirement.Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 1813 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1814 Providing And Laying Of Soling Stone Including Manual Compaction 1815 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2Coarse Sand , 4Graded Stone Aggregate 20Mm Nominal Size ) 1816 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:- = 02 Nocurrent Rating = 160 Amp. 4 Pole 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 100 A 3 Pole36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 20-H Hp ( Mug 20 H ) Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 28-42 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1817 Providing, Fitting, Testing And Commissioning Of 30Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 250-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specifications. 1818 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade 50 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 1819 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 With Thimbling 1820 Providing And Fitting Of16 Square Mm 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. 1821 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 1822 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 1823 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In-Charge. 1824 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1825 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1826 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1827 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Reputedthe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 1828 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Ii. Double Ended Ring Spannerschrome Platedof Size Inmm 6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Iii. Allen Key Set Black Finish Of Size In Mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Make – Tapariaeach – 2 No.Iv. Combination Pliersinsulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Make – Tapariaeach – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vii. Insulated Screw Drivers ( Make – Taparia ) Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 02 75 3 1.6 X0.4 02100 3 3 X 0.4 02 125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02 200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg , 340 Gm , 600 Gm –Each – 1No. Make Taparia. Ix. Heavy Duty Pipe Wrench Length In Mm- 200, 300, 600 Each – 01 No. Make Taparia.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. ( Fluke / Meco / Scemens / Mastech ) Xii. Digital Clamp Testercapable To Measure Up To 400A-1 No.Xiii. Hack Saw Framewith Hack Saw Blade – 01 No.Xiv. S-16Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. Make Taparia 1829 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1830 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1831 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 1832 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1833 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1834 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1835 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1836 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 1837 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Ammendments.The Dg Set Is Required To Be Fitted & Tested On Load At Site. The Dg Set Shall Have The Following Specifications. Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Includes Cost On Aaccount Of Hsd & Skilled Operator Required For Operation Of Dg Set For A Period Of One Hour Contineously During Its Testing & Commissioning At Site.The Canopy Of The D. G. Set Shall Be Fabricated Out Of M. S. Sheet Of Required Gauge So As To Withstand The Snow Load Etc, Duly Painted. Rating: 25Va, Aircooled Dg Set Rated Speed 1500 Rpm, Engineaspiration Turbo Chargedmanufacturers Test Certificate To Be Appended.Rest Oftechnical Specification As Perclause 66 Of Technical Anexure Of Sbd 1838 ( Part B ) Pump House Of Wss N.C. Naina ( Adv. Cost Rs. 16, 70, 022 / - ) 1839 Earth Work In Excavation By Manual Means Over Areas Exceeding 30 Cms & Upto 5 M In Depth 1.5M In Width As Well As 10 Sqm. On Plan, Disposal Of Excavated Earth Upto 1 M, Disposed Earth To Be Levelled & Neatly Dressed ( All Kinds Of Soils ) 1840 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete Andfilling Of Stone In Rooms ( Dully Hand Packed ) 1841 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 1842 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:2:4 Stone Agg. 20Mm Nominal Size 1843 P / Lin Position Specified Grade Ofcement Cencrete ( 1:3:6 ) Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level Stone Agg. 20Mm Nominal Size 1844 Providing & Laying Damp-Proofcourse 40 Mm Thickwith Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Agg 12.5 Mm Nominal Size ) And Curing Complete 1845 Brickwork In Common Burnt Clay Fps Bricks Of Class Designed 75 In Foundation In 1:4 Mix 1846 Extra For Brick Work In Superstructure Above Plinth Level Upto Floor V Level. ( By Manual Means ) 1847 P / L Of Reinforced Cement Concrete 1:1.5:3 Mix With 20-Mm Nominal Size Aggregates Includingcuring But Excluding Cost Of Shuttering 1848 Providing And Fixing Of Pannalled Wrought Framed Chowkats In Wood Work Of 2Nd Class Kail Wood 1849 Providing And Fixing Of Pannalled / Pannelled Or Glazed Shutters 35-Mm Thick Of 2Nd Class Kailwood Including 4.0 Mm Thick Glasss Panes 1850 Providing And Fixing 35Mm Thick Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge2nd Class Deodar Wood 1851 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete. 1852 Providing / Fixing Of Hinges Of Sizes, Handles, Haldarwazs, Latches Incl. Screws Of Sorts All Complete Job. 1853 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1And M.S. Top Cover Of Required Thickness For Rolling Shutter80x1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover 1854 Ball Bearing 1855 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 1856 Centering And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work For Founadtions, Footings, Bases Of Columns For Mass Concrete 1857 Lintel 1858 Slab 1859 Edges 1860 P / L12-Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement : 4 Coarse Sand ) 1861 Providing And Fixing Of Sanitary Items I.Eindian Type Wc, Flusing Cistern , Wash Basin, Beb Cocks, 15-Mm Dia G.I Pipe With Fittings, Pvc Waste Pipes, Sink To Kitchen, 1000 Ltr Pvc Tank And 35 Ltr Gyser Etc 1862 Provision For Construction Of Ring Type ( Four Compartment ) Septic Tankof Depth 10 Feet Each Includingcost Of Earthwork Excavation, Cost Of Rings, Iron Cover, Pvcprince Type B-Pipe, P Traps And Connecting Of Septic Tank With Soakage Pits Including All Accessories Whichever Is Required For Completion Of Workwith Ci Lids. Complete 1863 Provision For Construction Of One Compartment Soakge Pit Of Depth 10 Feetcost Of Earthwork Excavation, Cost Of Rings, Iron Cover Etc Complete Job 1864 Providing And Fixing Ist Quality Ceramic Glazedtiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. ( Kitchen / Bathroom ) 1865 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1866 Applying Priming Coat With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 1867 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Color To Give An Even Shade Two Or More Coat Icluding Priming Coat ( Walls Interior And Exterior And Wood Work ) 1868 Providing And Fitting Of Electricfication To The Operator Quarter 1869 Steel Work Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position Amd Applying A Priming Coat Of Approved Steel Primer Using Structural Steel 1870 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 1871 Eves Boardings 1872 Ridges Or Hips Of Width 60Cm Overall Width 0.63 Mm Thick 1873 Providing, Fixing And Installation Of Electric Ceiling Fan Of Approved Brand And Manufacturer With All Carriage Complete 1874 Providing, Fixing And Installation Of Exhaust Fan Of Approved Brand And Manufacturer With All Carriage Complete 1875 Carriage Of Materails By Mech.Transport, From Source To Site Of Work Sand AndStone Agg.For An Avg Lead Of 15 Km 1876 Cement From Div. Store Awantipora For An Avg Lead Of15 Km 1877 Bricks For An Avg. Lead Of 26 Km 1878 16. ( Part A ) Wss Sathergund Qazigund ( Stage 1St & Stage 2Nd ) ( Adv. Cost Rs. 1, 08, 43, 415 / - ) 1879 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 10000Gph , 50 Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Iron4.Rpm- 14440The Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parametersc ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Deltah ) Rpm-14440 The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site. Manufacturers Test Cerrtificateto Be Appended. 1880 Fabrication, Providing And Fitting Of Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 125 Mm 1881 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. 1882 Providing / Supplying And Fitting Of G.I Flanged 125 Mm Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Bconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 1883 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1884 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 1885 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M Ad Lift Upto 1.5M. 1886 Providing And Laying Of Soling Stone Including Manual Compaction 1887 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation, Footings, Bases For Columns 1888 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 1.5 : 3 Mix ( 1 Cement , 1.5 Coarse Sand , 3 Graded Stone Aggregate 20Mm Nominal Size ) 1889 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 1890 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 125Mm Dia. G.I C-Class Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. 1891 Providing And Fitting Of, Dn 125 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1892 Providing And Fitting Ofdn 125Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1893 Providing, Fitting , Testing And Commissioning Of50 Mm Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main .. . The Arv Shall Have The Following Specifications: -I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 70Oc To 550 C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. 1894 Fabrication , Providing And Fitting Of125mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofclassb Gi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 1895 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 125 , Class-B 1896 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete . The Detailed Drawing As Appended. 1897 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :I. Make= Reputed Makecapacity=3 Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift= 6 M 1898 Supply, Installation, Testing & Commissioning Of Non Clog Pumping Unit As Per Is 5600 At Raw Water Stage. Pump: - • Type Of Pump :Non –Clogopen Wellsubmersible Vertical Pump • Discharge: 10, 000 Gph •Head : 50 Meter.• Solid Handling Capacity: 20Mm ( Minimum ) • Quality Of Water:Raw Waterto Be Handled Material Of Construction:• Pump Casing: Cast Iron• Impeller : Stainless Steel• Pump Shaft: Stainless Steel• Motor Body: Cast Iron• Sealing :Dual Mech. Seal ? The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: -• Type : Squirrel Cage 3-Phase Induction Motor • Rating : Suitable For Above Parameterbut Not Less Than 20 Hp• Method Of Starting:Star – Delta.• Frequency : 50Hz + 3%• Voltage : 415± 6 %, -15% • Class Of Insulation:Suitable For Above Rating.• Sealing : Dual Mech. Seal. Provided With Thermal And Overload Protectionthe Motor Shall Be Made Of Corrosion Resisting Materials To Resist Corrosion Under Normal Conditions And The Motor Shall Have A Name Plate Depicting All Specificationsdual Mechanical Seals ( 01 No ) And Bearings ( 02 No ) For The Pumping Unit Must Be Provided As Spare Parts For Preventive Maintenance By The Firm. For Each Pumping Unitnote: Test Certificate Having The Serial No. Of The Pumping Unit Along With The Performance Curve In Duplicate From The Manufacturer Must Be Produced On Delivery Of The Item. 1899 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type 63 Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 1900 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1901 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1902 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1903 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1904 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1905 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 1906 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1907 P / F Danger Plate With Clamps 1908 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 1909 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1910 Painting Of Poles Red Oxide 1911 Painting Of Poles Aluminum Paint 1912 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1913 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 1914 Providing And Fitting Of Suspension / Tension Clamp With Eye Hook, Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1915 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1916 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits . The Capacity Of H.T Transformeris 63 Kva 1917 P / I / T / C Of Lt 3-Phase , 4 –Wire, Prodigy Meter Of Capacity 40-200 Ampere, 415 V, 50 Hz, Preferably Secure Make With All Accessories And Fittings , Cabling Required As Per Site Requirement .Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 1918 P / I Of Earthing Station For 63 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1919 Earthing Complete By Gi Pipe 40Mm , 3 Meter Long Through Gi Strip 25X3mm 1920 Earth Work In Excavation By Manual Means In Trenches For Foundation , Drains , Pipes , Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed.All Kinds Of Soil 1921 Providing And Laying Of Soling Stone Including Manual Compaction 1922 A. Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1923 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :4-Poleqty:- = 02 Nocurrent Rating = 200 Amp. / 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 125 A / 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = Mu-G30 Star / Delta Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 30-50 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1924 Providing, Fitting, Testing And Commissioning Of 50Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specifications. 1925 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade 35 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 1926 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 1927 Providing And Fitting Of16 Square Mm 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. 1928 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 1929 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 1930 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 1931 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In-Charge. 1932 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1933 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1934 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1935 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Safe Volt / Jyotithe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 1936 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Ii. Double Ended Ring Spannerschrome Platedof Size Inmm 6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Iii. Allen Key Set Black Finish Of Size In Mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Make – Tapariaeach – 2 No.Iv. Combination Pliersinsulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Make – Tapariaeach – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vii. Insulated Screw Drivers ( Make – Taparia ) Blade Length In Mmblade Dia. In Mmtip Dimensions In Mm Quantity 50 3 1.6 X 0.4 0275 3 1.6 X0.4 02100 3 3 X 0.4 02125 3.5 3.5 X 0.502150 3.5 3.5 X 0.5 02200 4 4 X 0.6 02300 5 5 X 0.8 02Viii. Hammer With Handle Weight – 110 Mg , 340 Gm , 600 Gm –Each – 1No. Make Taparia. Ix. Heavy Duty Pipe Wrench Length In Mm- 200, 300, 600 Each – 01 No. Make Taparia.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. ( Fluke / Meco / Scemens / Mastech ) Xii. Digital Clamp Testercapable To Measure Up To 400A-1 No.Xiii. Hack Saw Framewith Hack Saw Blade – 01 No.Xiv. S-16Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. Make Taparia 1937 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 1938 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 1939 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 1940 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 1941 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 1942 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 1943 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 1944 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 1945 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Ammendments.The Dg Set Is Required To Be Fitted & Tested On Load At Site. The Dg Set Shall Have The Following Specifications. Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Includes Cost On Aaccount Of Hsd & Skilled Operator Required For Operation Of Dg Set For A Period Of One Hour Contineously During Its Testing & Commissioning At Site.The Canopy Of The D. G. Set Shall Be Fabricated Out Of M. S. Sheet Of Required Gauge So As To Withstand The Snow Load Etc, Duly Painted. Rating:30 Kva, Aircooled Dg Set Rated Speed 1500 Rpm, Engineaspiration Turbo Chargedmanufacturers Test Certificate To Be Appended.Rest Oftechnical Specification As Pertechnical Anexure Of Sbd 1946 Stage 2Nd Of Wss Sathergund Qazigund 1947 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 10000 Gph, 35 Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Ironthe Pump Shall Confirm To Is-1520 Coderpm 1440. Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parameters Or 20Hpc ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Deltah ) Rpm1440. The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site. Manufacturers Test Certificate To Be Appended. 1948 Fabrication, Providing And Fitting Of 125 Mm Dia Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 100 Mm 1949 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. 1950 Providing / Supplying And Fitting Of G.I Flanged 125 Mmrising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Bconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 1951 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1952 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 1953 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Reaming And Watering , Lead Upto 50 M Ad Lift Upto 1.5M. 1954 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation , Footings , Bases For Columns 1955 Providing And Laying Of Soling Stone Including Manual Compaction 1956 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 1.5 : 3 Mix ( 1 Cement , 1.5 Coarse Sand , 3 Graded Stone Aggregate 20Mm Nominal Size ) 1957 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 1958 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 125Mm Dia. G.I C-Class Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. 1959 Providing And Fitting Of, Dn 125 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1960 Providing And Fitting Ofdn 125 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 1961 Fabrication , Providing And Fitting Of125mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofclassb Gi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 1962 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete . The Details Are As Per Drawing Appended. 1963 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Features. Gears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :I. Make= Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift= 6 M 1964 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type 25 Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 1965 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 1966 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 1967 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 1968 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 1969 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 1970 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 1971 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 1972 P / F Danger Plate With Clamps 1973 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 1974 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 1975 Painting Of Poles Red Oxide 1976 Painting Of Poles Aluminum Paint 1977 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 1978 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 1979 Providing And Fitting Of Suspension / Tension Clamp With Eye Hook, Straps And Buckles Or Nuts And Bolts Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 1980 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 1981 Providing And Fitting Of63 A Tpn Switch Disconnector Fuse Unit.. The Capacity Of H.T Transformeris 25Kva. 1982 P / I / T / C Of Lt 3-Phase , 4 –Wire, Prodigy Meter Of Capacity 40-200 Ampere, 415 V, 50 Hz, Preferably Secure Make With All Accessories And Fittings , Cabling Required As Per Site Requirement .Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 1983 P / I Of Earthing Station For 25 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 1984 Earthing Complete By Gi Pipe 40Mm , 3 Meter Long Through Gi Strip 25X3mm 1985 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 1986 Providing And Laying Of Soling Stone Including Manual Compaction 1987 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 1988 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 100 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:- = 02 Nocurrent Rating = 200 Amp. / 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =100 Ampered ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 125 A / 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = Mu-G30 Star / Deltapower Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 30-50 A.Protection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause-43 Oftechnical Annexure Of Sbd 1989 Providing, Fitting, Testing And Commissioning Of 40Kva Voltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Frequency : 50±3 C / S.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientmounting : On Uni-Directional Wheels.Correction Rate : 30 Volts Per Stepwave Form Distortion: Virtually Nilduty Cycle : 100% Continuous.Enclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate And Shall Have Name Plate With Specifications. 1990 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv And 11Kv Grade 35 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 1991 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Intwrconnecting Various Electrical Gadets As Per Is 694: 2010 1992 Providing And Fitting Of16 Square Mm 3-Core Flat Submersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964 For Submersible Pumping Unit And Other Electrical Equipments . The Cable Connections Terminal Shall Be Fitted With Copper Thimbles Of Required Size. 1993 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 1994 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 1995 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging As Per Requirement And Directions Of The Site In-Charge. 1996 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 1997 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 1998 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Reputed ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Reputed ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 1999 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 2000 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 2001 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 2002 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2003 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2004 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2005 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Safe Volt / Jyotithe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 2006 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 2007 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Ammendments.The Dg Set Is Required To Be Fitted & Tested On Load At Site. The Dg Set Shall Have The Following Specifications. Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Includes Cost On Aaccount Of Hsd & Skilled Operator Required For Operation Of Dg Set For A Period Of One Hour Contineously During Its Testing & Commissioning At Site.The Canopy Of The D. G. Set Shall Be Fabricated Out Of M. S. Sheet Of Required Gauge So As To Withstand The Snow Load Etc, Duly Painted. Rating:25 Kva, Aircooled Dg Set Rated Speed 1500 Rpm, Engineaspiration Turbo Chargedmanufacturers Test Certificate To Be Appended.Rest Oftechnical Specification As Pertechnical Anexure Of Sbd 2008 ( Part B ) Pump House Of Wss Sathergund Qazigund ( Adv. Cost Rs. 16, 70, 022 / - ) 2009 Earth Work In Excavation By Manual Means Over Areas Exceeding 30 Cms & Upto 5 M In Depth 1.5M In Width As Well As 10 Sqm. On Plan, Disposal Of Excavated Earth Upto 1 M, Disposed Earth To Be Levelled & Neatly Dressed ( All Kinds Of Soils ) 2010 Providing & Laying Ofstone Soling ( Dully Hand Packed ) Including Watering Dressing And Ramming With All Carriages Loading Un-Loading And Stacking Etc Complete Andfilling Of Stone In Rooms ( Dully Hand Packed ) 2011 Providing & Laying In Position Cement Concrete Of Specified Grade Excld. The Cost Of Centring And Shuttering All Work Upto Plinth Level ( 1:4:8 Coarse Sand 40Mm Nominal Size Crushed Stone Agg. ) 2012 P / Lin Position Specified Grade Of Reinforced Cement Cencrete Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level. 1:2:4 Stone Agg. 20Mm Nominal Size 2013 P / Lin Position Specified Grade Ofcement Cencrete ( 1:3:6 ) Excld. The Cost Of Centring, Shuttering, Finishing And Reinforecement-All Work Upto Plinth Level Stone Agg. 20Mm Nominal Size 2014 Providing & Laying Damp-Proofcourse 40 Mm Thickwith Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Agg 12.5 Mm Nominal Size ) And Curing Complete 2015 Brickwork In Common Burnt Clay Fps Bricks Of Class Designed 75 In Foundation In 1:4 Mix 2016 Extra For Brick Work In Superstructure Above Plinth Level Upto Floor V Level. ( By Manual Means ) 2017 P / L Of Reinforced Cement Concrete 1:1.5:3 Mix With 20-Mm Nominal Size Aggregates Includingcuring But Excluding Cost Of Shuttering 2018 Providing And Fixing Of Pannalled Wrought Framed Chowkats In Wood Work Of 2Nd Class Kail Wood 2019 Providing And Fixing Of Pannalled / Pannelled Or Glazed Shutters 35-Mm Thick Of 2Nd Class Kailwood Including 4.0 Mm Thick Glasss Panes 2020 Providing And Fixing 35Mm Thick Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge2nd Class Deodar Wood 2021 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete. 2022 Providing / Fixing Of Hinges Of Sizes, Handles, Haldarwazs, Latches Incl. Screws Of Sorts All Complete Job. 2023 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1And M.S. Top Cover Of Required Thickness For Rolling Shutter80x1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover 2024 Ball Bearing 2025 Reinforcement For Rcc Work Incld Straightning, Cutting, Bending, Placing In Position & Binding All Complete ( Thermo-Mechanically Treated Bars ) 2026 Centering And Shuttering Incld. Strutting, Proping Etc & Removal Of Form Work For Founadtions, Footings, Bases Of Columns For Mass Concrete 2027 Lintel 2028 Slab 2029 Edges 2030 P / L12-Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement : 4 Coarse Sand ) 2031 Providing And Fixing Of Sanitary Items I.Eindian Type Wc, Flusing Cistern , Wash Basin, Beb Cocks, 15-Mm Dia G.I Pipe With Fittings, Pvc Waste Pipes, Sink To Kitchen, 1000 Ltr Pvc Tank And 35 Ltr Gyser Etc 2032 Provision For Construction Of Ring Type ( Four Compartment ) Septic Tankof Depth 10 Feet Each Includingcost Of Earthwork Excavation, Cost Of Rings, Iron Cover, Pvcprince Type B-Pipe, P Traps And Connecting Of Septic Tank With Soakage Pits Including All Accessories Whichever Is Required For Completion Of Workwith Ci Lids. Complete 2033 Provision For Construction Of One Compartment Soakge Pit Of Depth 10 Feetcost Of Earthwork Excavation, Cost Of Rings, Iron Cover Etc Complete Job 2034 Providing And Fixing Ist Quality Ceramic Glazedtiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. ( Kitchen / Bathroom ) 2035 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 2036 Applying Priming Coat With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 2037 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Color To Give An Even Shade Two Or More Coat Icluding Priming Coat ( Walls Interior And Exterior And Wood Work ) 2038 Providing And Fitting Of Electricfication To The Operator Quarter 2039 Steel Work Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position Amd Applying A Priming Coat Of Approved Steel Primer Using Structural Steel 2040 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2041 Eves Boardings 2042 Ridges Or Hips Of Width 60Cm Overall Width 0.63 Mm Thick 2043 Providing, Fixing And Installation Of Electric Ceiling Fan Of Approved Brand And Manufacturer With All Carriage Complete 2044 Providing, Fixing And Installation Of Exhaust Fan Of Approved Brand And Manufacturer With All Carriage Complete 2045 Carriage Of Materails By Mech.Transport, From Source To Site Of Work Sand AndStone Agg.For An Avg Lead Of 15 Km 2046 Cement From Div. Store Awantipora For An Avg Lead Of15 Km 2047 Bricks For An Avg. Lead Of 26 Km 2048 17. ( Part A ) Wss Durpora Cheermarag ( Adv. Cost Rs. 50, 46, 524 / - ) 2049 Supply, Installation, Testing And Commissioning Of Horizontalpumping Unit As Per Is 1520 With Following Specification:-Pump:- 1.Type :-Horizontal Split Casing / Multistagedischarge 8000Gph , 70 Mtr Headmaterial Of Construction1.Impeller:- S.Steel2.Shaft:-Ss4103.Pump Casing:- Cast Iron4. Rpm 1440The Pump Shall Confirm To Is-1520 Code Motor :-A ) Type :- Horizontal Squirrel Cage Induction Typeb ) Rating:- Suitable For Above Parameters But Not Less Than 25 Hp.C ) No Of Phases: 3 Phase415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Spdp / Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Deltah ) Rpm 1440 The Pump-Motor Should Be Mounted On A Common Base Frame Fabricated Out Of M.S Channel Of Suitable Size And Duly Fitted With T- Type Foundation Bolts / Nuts And Washers To Make The Pumping Unit Vibration Free. The Pump And Motor Should Be Coupled Through Suitable Coupling. The Coupling Faces Checked For Both Angular And Axial Alignment With The Help Of Tapered Gauges / Feeler Gauges Or Dial Indicator.Job Includes Testing And Commissioning Of Pumping Unit On Full Load At Site. Manufacturers Test Cerrtificateto Be Appended. 2050 Fabrication, Providing And Fitting Of 100 Mm Dia Y- Junction Having 1M Length Of Each Armto Be Fabricated Out Ofhot Dip Galvanized G.I, C-Class Pipe . The Job Also Includes Providing And Welding Of M.S Flanges To The Ends Of Each Arm . The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Y- Junction Is 100 Mm 2051 Cutting Of Hot Dip Galvanized G.I, Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Advani / Esab / L&T- Ss Bond Make Electrodes To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. The Size Of The Pipe Isdn 100 , Class-C 2052 P / I / T / C Of Horizontal Single Phasemonoblock Self Primingpumping Equipmentthe Pump & Motor Should Be Mounted On A Suitable Size Ms Base Frame . The Job Also Includes P / F Of Foundation Bolts, Dol Starter, Wiring, And Allied Items. Test Certificate Of Manufacturerto Be Appended. 2053 Providing / Supplying And Fitting Of 100 Mm G.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class Cconfirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . The Flanges Shall Be Double Welded Both From Inside And Outside Of The Pipe Using Standard Electrode Of Reputed Make.Flanges ( As Per Is 6392 / 1997 Table:17 ) Thickness Shall Conform To Is 6392 Part 1St Table-17. The Flange Welding Shall Be Carried Out In Double Layers Using Reputed Make Electrodes To Form Strong Welding Joint.Welding Electrodedc Arc Welding Using Welding Electrode Having Diameter Not Less Than 4Mm.Nuts And Boltsnuts And Bolts ( Conforming To Is:1363 Part 1St ) Rubber Insertion Gasketsrubber Insertion Gaskets ( Conforming To Is: 638 / 79 ) To Be Used Between Flanged Joints. 2054 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. I. All Kinds Of Soil ( 80 % ) 01 Meter From Cutting Edge 2055 Ii. Ordinary Rock ( 20% ) 01 Meterfromcutting Edge 2056 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M Ad Lift Upto 1.5M. 2057 Providing And Laying Of Soling Stone Including Manual Compaction 2058 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For: Foundation , Footings , Bases For Columns 2059 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 1.5 : 3 Mix ( 1 Cement , 1.5Coarse Sand , 3 Graded Stone Aggregate 20Mm Nominal Size ) 2060 Providing And Laying In Position 12 Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) 2061 Fabrication, Providing And Fitting Of Washout Tee With Each Arm One Feet Long Shall Be Fabricated Out Of 100 Mm Dia. G.I C-Class Pipe With 16Mm Thick Flanges Fastened With Weld Joints On Three Ends. 2062 Providing And Fitting Of, Dn 100 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .The Body And Bonnent Of The Valve Shall Be Of Ductileiron, Wedge With Fully Vulcanized Epdm Rubber ( Approved For Drinking Water ) And Nbr Seal. The Gate / Sluice Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positionsit Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve. The Valve Shall Be Supplied Along With Hand Wheel.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 2063 Providing And Fitting Ofdn 100 Mm Pn 1.6 / 16Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per Is 5312. The Body Shall Be Of Ductile Cast Iron With Fully Encapsulated Vulcanized Epdm Rubber ( Approved For Drinking Water ) . The Valve Shall Be Compatible For Buried Applications And Shall Be Safe To Install In Both Horizontal And Vertical Positions.It Shall Have Electrostatic Epoxy Coating ( Approved For Drinking Water ) Both Inside And Outside Of The Valve.Cost On Account Of Nuts, Bolts, Gaskets, Etc Required For The Job Is Included In The Scope Of Work.The Job Includes Providing And Fitting Of 02 Nos. M.S Flanges Perfectly Adaptable To The Inbuilt Flanges Of The Valve Which Shall Be Fitted With Rising Main Of The Pumping Unit At Appropriate Spots As Per Site Requirement. The Job Includes The Cost On Account Of P / F Of Nuts, Bolts And Gasket Required For The Job. 2064 Providing, Fitting , Testing And Commissioning Of50mm Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted Tog.Irising Main .. . The Arv Shall Have The Following Specifications: -I. Valve Type -Single Chamber, Single Orifice.Ii. End Connection-Flanged Ends To Is 1538 Iii. Working Temperature- 70Oc To 550 C Iv. Test Pressure - Body / Seat 2.5 X Pnv. Sealing Ring -Epdmvi. Construction-Ductile Iron With Stainless Steelfloatsvii. Coating -Epoxy With Corrosion Resistance Besides The Above Works, The Job Also Cost On Account Of P / F R.I Gasket, Nuts And Bolts Required For Installation Of Arv And Arrangement Of Gas Cutter / Welding Set At Site. 2065 Fabrication , Providing And Fitting Of100mm Dia 90-120 Degree Bend / Elbowto Be Fabricated Out Ofgi Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement. 2066 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. 2067 Fabrication Of Gantry Mechanism By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primercomplete In All Respects As Per Drawing Appended. 2068 Providing, Installation Andtestingof Manual Type Triple Spur Gearchain Pulley Block Along With Monorail Gearedtravelling Trolleyhaving Following Featuresgears:- The Hoist Shall Have Precision Machine Case Hardened Alloy Steel Gear Mounted On Bearings And Housed In A Dust Proof Gear Box. The Lubrication Of Gears Should Be Of High Viscosity And Temperature For Longer Life Of Gears.Load Chain:-The Load Chain Be Made Of High Tensile Alloy Steel Having Wear Resistance And Greatest Mobility. The Chain Should Be Accurately Collaborated, Tested And Have Adequate In Built Factor Of Safety For Safer Operation.Load Chain Wheel:- The Load Chain Well Should Be Double Ball Bearing Supported Andspecially Designed, Perfectly Machined Wheel Providing Correct Grip Of Load Chaintomakes The Hoist Most Safe And Reliable Against Any Failure. The Main Specifications Of C.P Block Are Given Below :I. Make= Reputed Makecapacity=2 Ton ( P ) No. Of Load Chain Falls= 2 Or Above Min. Height Of Lift= 6 Mmanufacturers Test Certificate To Be Appended. 2069 Fabrication, Providing And Fitting Ofmodularmotor Control Panel Of Appropriate Size Fabricated Out Of 14 Swg Sheet Having Required Openings / Vents And Protection Class : Ip-55 & Fitted With Accessories As Under:A ) Busbar Chamber: 200 Ampresb ) Main Circuit Breaker ( Incomer Mccb ) :Qty:- = 02 Nocurrent Rating = 200 Amp. 4 Pole 50 Kac ) Change Over Switch:Qty. = 01 No.Rating =200 Ampere D ) Motor Back-Up Protection Mccb:Qnty = 2 No’Scurrent Rating= 125 A 3 Pole 36 Kae ) Submersible Motor Starter:Fully Automatic Submersible Motor Starters. Rating = 50 Hp Power Specs =3 ?, 415 + 15% V, 50 + 3 % Hz.Relay Range= 45-75Aprotection = Under Voltage / Over Voltage Qty = 02 No’Sf ) Auxiliary Mccb For Heating / Lighting:Circuit Breaker = Mccb ( Outgoing ) Qty.= 1 No.Current Rating= 63 Amp.Rest Of The Specicifications Are As Per Clause 43G Of Technical Annexure Of Sbd 2070 Providing, Fitting, Testing And Commissioning Of 50 Kvavoltage Stabilizeras Per Specifications Below: Type Of Voltage Controller: Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step.Type Of Regulator: Double Plate Type With Electrolytic Copper Contacts.Input Voltage : 175-400 Volts. ( 3 Phase ) Output Voltage : 400 ±10% Volts.Windings : Electrolytic Grade Copper Of Adequate Section, Vacuum Impregnated Andoven-Dried.Insulation : Fiber Glass Insulations To Tested Parameters.Cooling: Naturally, Oil Cooledtemp. Rise ( Max ) : 30°C Above Ambientcorrection Rate : 30 Volts Per Stepenclosure : Ms Sheet Enclosure In Pressed Cgr Sheet Powder Coated With Radiators.Core Laminates: High Grade, Low Eddy Loss, Grain Oriented Silicon Steel Laminations.Load: Three Phase Induction Motor Load.Load Amperes ( Continuous ) Overload In 24-Hours Operation: 10% Above Continuous Ampere Rating.The Voltage Stabilizer Shall Have T-Oil Level Indicator Gauge Preferably Glass Type Tube Or Otherwise Visible To Naked Eye. The Top Of The Container To Have A Display Panel For Housing 02 Numbers Digital Voltmeters ( 0-500V ) Along With 4-Way Selector Switch And Set Of Neon Indicators For Incoming And Outgoing Phases ( 06 No’S ) .Insulating Media ( T. Oil ) Of 11 Kva Grade To Be Provided And Filled Upto Top Level, With Dielectric Strength Of 5 Kv At 4M Air Gap. The T-Oil Of Specific Grade Should Be Provided In Separate Barrels And Filled At Site Upto Top Level.The Voltage Stabilizer Shall Be Accepted With Manufacturers Dully Stamped Test Certificate With Rest Of Specifications As Per Sbd 2071 Providing And Fitting Of 3.5-Core, Xlpe, 1.1Kv Lt Grade 50 Square Mm Armoured Aluminium Cable Of Various Sizes Conforming To Is: 7098 Part 1St As Service Line From The Ht Transformer To Control Panel Including Necessary Thimbling, Crimping, Taping Etc. 2072 Providing And Fitting Of 35 Mm Square Single Core Copper Cable For Intwrconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Required Thimbling. 2073 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) . The Co2 Extinguisher Should Be Suitable For Class B & C Fire And Also For Fire Involving Electrical Equipments. The Cylinder Used For Fire Extinguisher Shall Be Approved By Protroleum Andexplosive Safety Organization ( Peso ) As Per Gas Cylinder Rules 2004 And As Per Is: 7285 Of 2004. The Body Should Be Made Of Seamless Steel ( Manganese ) Confirming To Is:7285 With Is Mark And Should Be Provided With Squeeze Grip Nozzle And Should Be Filled With Co2 Confirming To Is : 15222 Of 2002 With Certificate.The Extinguisher Shall Be Provided With Manufactures Test Certificate And Hydraulic Test Certificate By Bis From Peso. 2074 Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. The Job Includes Fabrication, Providing And Fitting Of Three Arm Gi Structure At The Top Having 120° Angle Between Arms And Each Arm Having 15° Inclination With Respect To Horizontal Plane. Each Arm Should Be Of 2’ Length And Size And Shape Appropriate As Per Requirement Of The Luminary.The Job Also Includes Providing And Fitting Of Required Length Of Flexible Multi Strand 2 Mm Copper Wire From Each Terminal Connector To Each Holding Arm.The Pole Is Mounted On 1:2:4 Cement Concreting Of Size Not Less Than 2’X2’X6” ( Cost Of Concreting Not Included In The Job ) Using 04 No Anchor Bolts Of Required Size Not Less Than 7” In Length. The Complete Job Includes Earthing In Gi Electrode As Per Relevant Is Code 2075 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Vide Item No.36Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Colour Temperature: 4K - 6.5Kbeam Angle: 120° - 170°Lumens: >12000Operating Temperature: -20°C To 60°Cthe Led Is Pressure Die Cast Aluminum Housing With Power Coated Finish And Having Ingress Protection Up To Ip-68.The Led Is Properly Fitted On The Arm Of The Pole And Connected To The Copper Wire As Provided Inthe High Mast Pole 2076 Providing Laying And Connection Of 2Cx10 Mm² Xlpe Aluminum Armored Cable From The Connector Of High Mast Pole To The Stabilizer. The Job Includes Underground Laying Or Overhanging And Necessary Thimbling As Per Requirement And Directions Of The Site In-Charge. 2077 Providing And Installation Of Junction Box With Dp 32 A Mcb To Serve As Main Switch For Led Lighting. The Job Includes Making Of Electric Connection To The Circuit. 2078 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer With Input Voltage 70-240 V And Output 220 V. The Stabilizer Shall Be Installed And Connected To The Electric Circuit As Per Location Provided By Site Incharge. 2079 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter ( Make: Microtek / Luminous ) Including Providing / Installation Of 12V, 180Ah Tubular Inverter Battery With Trolley And Cover. ( Make: Amaron / Exide ) With 2-Core 6Mm2 Cu Wiring As Per Site Requirement Along With Other Accessories Like Ss-Combine ( 02 No’S ) , 3-Pin Plugs Etc Of Reputed Make For Proper Fitment And Installation Of The Item. 2080 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Due To Possible Leakage Of Current & Short Circuit. The Floor Surface Shall Be Made Good & Shall Be Free From Dust, Grease, Foreign Material & Moisture Free. The Mats Shall Be As Per Is 15652:2006 & Shall Have The Following Specifications: -Composition: Rubber ( Synthetic Mats For Electrical Purpose ) Thickness: - 2.5Mm Size: - 1M Wide.Make: - Safe Volt / Jyotithe Rubber Mats Shall Be Accepted With Manufacturers Test Certificate 2081 Supply, Installation, Testing & Commissioning Of Open Well Pumping Units As Per Is 14220 At Filter Water Stage. Pump: - • Type Of Pump:Open Wellsubmersible Pump ( Horizontal ) • Quality Of Waterto Be Handled :Spring Watermeterial Of Construction:• Pump Casing:Cast Iron• Impeller :Ss • Pump Shaft:Stainless Steel• Motor Body: Cast Iron • Sealing :Dual Mech. Seal ? The Bowl Plate Shall Be Provided With Name Plate Giving Complete Specifications ? Motor: -• Rating : Suitable For Above Parameter• Method Of Starting: Star – Delta.• Frequency: 50Hz + 3%• Voltage : 415 + 6 %, -15% • Class Of Insulation: Suitable For Above Rating. • Sealing:Dual Mech. Seal. Provided With Thermal And Overload Protection.The Motor Shall Be Made Of Corrosion Resisting Materials To Resist Corrosion Under Normal Conditions And The Motor Shall Have A Name Plate Givingcomplete Specificationsdual Mechanical Seals ( 01 No ) And Bearings ( 02 No ) For Each Pumping Unit Must Be Provided As Spare Parts For Preventive Maintenance By The Firm.Note: Test Certificate Having The Serial No. Of The Pumping Unit Along With The Performance Curve In Duplicate From The Manufacturer Must Be Produced On Delivery Of The Item. Motor Rating : 20 Hp 2082 Tool Kit For Maintenance: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Providing Of Tool Kit Consists Of Following Items I. Double Ended Spanner ( Chrome Plated ) Of Size In Mm6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Ii. Double Ended Ring Spannerschrome Platedof Size Inmm 6 / 7, 8 / 9, 10 / 11, 12 / 13, 14 / 15, 16 / 17, 18 / 19, 20 / 22, 21 / 23, 24 / 26, 25 / 28, 24 / 27, 30 / 32Make – Taparia Each – 02 No.Iii. Allen Key Set Black Finish Of Size In Mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 Make – Tapariaeach – 2 No.Iv. Combination Pliersinsulated With Thick C.A Sleeve; Size In Mm 165, 210, 255Make – Tapariaeach – 02 No.V. Long Nose Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vi. Side Cutting Plier Insulated With Thick C.A Sleeve; Size In Mm 165, 205Make – Tapariaeach – 02 No.Vii. Insulated Screw Drivers ( Make – Taparia ) Viii. Hammer With Handle Weight – 110 Mg , 340 Gm , 600 Gm –Each – 1No. Make Taparia. Ix. Heavy Duty Pipe Wrench Length In Mm- 200, 300, 600 Each – 01 No. Make Taparia.X. Electric Multimeter=1Noxi. Digital Multimeter – 1No. ( Fluke / Meco / Scemens / Mastech ) Xii. Digital Clamp Testercapable To Measure Up To 400A-1 No.Xiii. Hack Saw Framewith Hack Saw Blade – 01 No.Xiv. S-16Mxl, S- 16 H X L Socket Set ( 19 Sockets + 6 Accessories ) – 01 No. Make Tapariarest Of The Specicifications Are As Per Technical Annexure Of Sbd 2083 Fabricationof6’ X 6’ Angle Iron Bed By Way Of Providingand Fitting Of Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Welded 2084 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 2 Nos Including Cutting , Fixingall Complete Including Painting Of The Play Sheet By One Coat Of Primer And Two Coats Of Enamel Paint 2085 A ) Providing Of Good Quality Bedding For Night Stay / Shift Consisting Of: -I ) Mattress With Warm Cover Size 6X3 ( 6Kg ) - 02 No’Sii ) Quilt With Warm Cover Size 5X8 ( 6Kg ) - 02 No’Siii ) Pillows With Covers - 02 No’Siv ) Single Bed Warm Blankets With One Sided Fur- 02 No’Sthe Filling Material For Mattress, Quilt And Pillow Shall Be Of Good Quality Cottonb ) The Job Also Includes Providing Of Pressure Cooker 5Ltr 02 No’S, Steel Patila ( Utensil ) 5Ltrs 02 No’S, Cooking Heater 01 No., Room Heater 01 No., Steel Buckets 10 Litre Capacity 01 No., Plastic Bucket 10 Litre Capacity With Mug 02 No’S Each, Steel Glasses 06 No’S, Steel Plates With Large Spoons And Bowls 03 No’S Each, Cup And Saucer Set ( 01 No. Set ) And, 5Kg Gas Cylinder With Burner / Stove. All The Utensils Shall Be Of Prestige, Pigeon, Wonder Chef, United, Futura Make.The Job Also Includes Providing Of Thermo-Cool 15’X12’ Along With Excel Matting Of 15’X12’ Size. The Job Also Includes Providing Of Unbreakable Plastic Chair Table Set Consisting Of Chairs 04 No’S, Extra Heavy Table 01 No. Of Samruddhi / Neel Kamal / Supreme / Anmol Make. The Job Also Includes Providing Of Good Quality Safety Door Locks ( 03 No’S ) Of Godrej, Link Locks, Thapar Make. 2086 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2087 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2088 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2089 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metal Showing The Names Of Water Supply Scheme And The Department. Size:6’×1’6” 2090 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site. Size: 4’×6’ Out Ms Angle Of 40X 40X 5Of 36 Rft And Ms Sheet Of 1 Mmthicktotal Weight Of50.16 Kgs 2091 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Air Cooled Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Ammendments.The Dg Set Is Required To Be Fitted & Tested On Load At Site. The Dg Set Shall Have The Following Specifications. Besides The Above Works The D.G Set Shall Be Provided With 12 V, 150 Ah Lead Acid Battery Of Reputed Make Fitted Inside The D.G Set Canapy Along With Necessary Accessories And Battery Charger Of Required Capacity. The Job Includes Cost On Aaccount Of Hsd & Skilled Operator Required For Operation Of Dg Set For A Period Of One Hour Contineously During Its Testing & Commissioning At Site.The Canopy Of The D. G. Set Shall Be Fabricated Out Of M. S. Sheet Of Required Gauge So As To Withstand The Snow Load Etc, Duly Painted. Rating:45 Kva, Aircooled Dg Set Rated Speed 1500 Rpm, Engineaspiration Turbo Chargedmanufacturers Test Certificate To Be Appended.Rest Oftechnical Specification As Perclause 66 Of Technical Anexure Of Sbd 2092 Supply , Installation , Commissioning And Creation Of Pole Mounted , Outdoor Type 63 Kva Electric Sub Station As Per The Technical Specifications Given Here Under -Specifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments .Type: Ht / Lt Transformertype Of Cooling:Onan.Operating Conditions:Input=11000 Voltsoutput =433 Volts Ac Supply In 3- Phase.Terminals:Input=3 No. Ht Bush Rods With Insulators, Washer, Nuts Etc.Output=4 No. Lt Bush Rods Switch Insulators, Washers, Nuts Etc.Core: The Core Shall Be Of High Permeability To Reduce Core Losses And The Strips Shall Be Of Suitable Size And Gauge. Transformer Coils: Suitable Number Of Ht And Lt Coils In Each Leg Of The Core. The Transformer Coils Shall Be Fabricated Out Of Superior Quality Aluminum Wire / Strips, Properly Wound. The Ht Transformer Is Completely Filled With Suitable Grade Transformer Oil Up To Required Level. The Job Includes Carriage, And All Leads And Lifts Involved.The Ht Transformer Shall Be Of Reputed Make From An Iso Certified Company As Per Relevant Standards And A Test Certificate Shall Be Provided Before Installation. The Transformer Shall Also Be Provided With Breather Fill With Silica Jel Crystals , Conservator With Oil Level Indicator , Explosion Vet And Adequate Radiator Fins / Tubes. The Impedance Of Transformer Shall Be As Per Is:1180 ( Part 1 ) 2014 With Latest Amendments.Note: The Scope Of The Work Shall Include Obtaining Of Necessary Inspection / Clearance Certificate From The Concerned Department For All The Required Equipment. The Testing And Commissioning Shall Be Completed Only After Obtaining Above Certificate. 2093 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clamps 2094 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Single Break Provided With Locking Arrangement At Both On And Off Position Consisting Ofht Post Double Insulator, Copper Or Copper Alloy High Pressure Heavy Contact Assembly, Rod With Bearings , Operating Handle And 2 Length Of 32Mm Dia. Gi Pipe Conforming To Is 1818 1961, 06 No. Of Insulators, Rated Voltage 11Kv 200A Complete As Per Is Specs. 2095 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gap3-Phase 200 Asuitable For Vertical Installation . 2096 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class, 10Ka, 9Kv, La With Polymer Housing , Station Type . 2097 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator 12 Kv, 5Kn, Lighting Impulse 75Kv Positive, And 80 Kv Negative , Creepagedistance 320 Mm 2098 Supply, Installation, Errection Of9 Mtrslongh.T Pope Of Specificationsst- 410 ( Sp-33 ) . The Job Further Includes Drilling Of Holes For Installation Of Various Accessories .Wherever Requiredthe Job Further Includes G.I Wire Earthing Of Pole As Per Rec Standard. 2099 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement. 2100 P / F Danger Plate With Clamps 2101 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti-Climbing Devices 2102 Providing And Fitting Of Galvanized Stay Set With 50 X 8 Mm Stay Clamp , Guy Insulator ( 2No. ) , Anchor Plate ( 200X200x6mm ) , Nuts And Bolts , 2 N0- Turn Buckle , 1.8 M Long , 16 Mm Diameter Solid G.I Stay Rod & 7 / 3.15 Mm Dia. G.I Stranded Wire Complete. 2103 Painting Of Poles Red Oxide 2104 Painting Of Poles Aluminum Paint 2105 Providing And Fitting Of Acsr As Per Is 398 ( Part-2 ) 1996 For 50 Sq.Mmacsr ( Galvanised Steel Reinforced ) For Fitment Of Various Accessories 2106 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35Phases:Red, Yellow, Blue 2107 Providing And Fitting Of Suspension / Tension Clamp With I Eye Hooks Required For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable. 2108 P / F Of 11 Kv Cable Termination Kit For Connecting 35 Sq Mm Xlpe Cable ( Abc Type ) With The Existing Ht Line Near Tapping Point And Ht Transformer. 2109 P / I Of Earthing Station For 63 Kva Electric Substation, Lt Panel And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. The Job Includes Auguring Of Bore Of Required Dia / Depth For Installation Of Electrode Along With Backfill Compound Mixed With Soil And All Other Items Required Thereof For Achieving The Best Result. The Job Includes Connecting Of Electric Gadgets Through Gi Strip As Per Relevant Standards. Safe Earthing Electrode Size:80 Mm Dia , Length :2000 Mmback Fill Compound :30 Kg 2110 Earthing Complete By Gi Pipe 40Mm Or Gi Rod 3 M Long Through Gi Strip 25X3mm 2111 P / I / T / C Of Lt 3 Phase, 4 Wire, Prodigy Meter Of Capacity 40-200 Amp, 415 V, 50 Hz Preferably Of Secure Make With All Accessories & Fittings, Cabling Required As Pe Site Requirement.Note:- The Job Includes Complete Charging Of Subsation Which Includes Getting Clearnace From Pdd And Sealing Of Meter Etc. 2112 Providing And Fitting Of Lt Distribution Box For H.T Transformer With Mccb For Incomer And Sfu For Outgoing Circuits . The Capacity Of H.T Transformeris 63 Kva 2113 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts , Wells , Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed.All Kinds Of Soil 2114 Providing And Laying Of Soling Stone Including Manual Compaction 2115 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2: 4Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2116 ( Part B ) Pump House Of Wss Durpora Cheermarag ( Adv. Cost Rs. 17, 78, 623 / - ) 2117 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed:All Kinds Of Soil :1 Meter From Cutting Edge. 2118 Providing & Laying Of Stone Soling Hand Packed In Trenches. ( Nallah ) 2119 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2120 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchors Blocks, Plain Window Sills, Fillets Etc Upto Floor V Level, Including Curing But Excluding The Cost Of Centring, Shutteringand Finishing With. 2121 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With: 1:1½:3 ( 1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 2122 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns Etc. For Mass Concrete. 2123 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 2124 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 2125 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level: Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 2126 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand ) 2127 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.Welded 2128 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 2129 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2130 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2131 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2132 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.35Mm Thick.First Class Kail Wood 2133 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40Mm Thick.First Class Kail Wood 2134 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood.35Mm Thick 2135 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is:15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. In Colour Such As White, Ivory, Grey, Fume Red Brown 2136 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades, Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2137 Providing And Installation Of Water Geyser 50 Ltrof Reputed Make Like Havells / Recold / Venus, Incl Nuts Bolts , And All Sanitary Fittings , Angle Valves, Cp Connections Etc Complete Job. 2138 Providing, Installation And Fixing Of 1Hp Water Motor Of Isi / Rputed Make Incl. Cost Of Electrical Wiring, Control Switches, Pipe Work, Fittings, Specials And Insulation, Complete Job. 2139 Providing & Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With “S” Or “P” Trap Including Dismantling Of Old Wc Seat And “S” Or “P” Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge.Orissa Pattern W.C Pan Of Size 580X440 Mm 2140 Providing And Fixing Of Wash Basin Vitreous China Of Isi Mark Incl Cost Of Fittings And Brackets, Incl Cost Of Waste Pipe , Angle Valves, Cutting And Making Good The Walls Whereever Required. ( 450 X 300 Mm ) . 2141 Providing And Fixing Of Salem Stainless Steel Kitchen Sink Of Isi Mark 304 ( 18 / 8 ) As Per Is 13983 With C.I Brackets And S.S Plug 40Mm Incl Painting Of Fittings And Brackets, Incl Cost Of Waste Pipe , Cutting And Making Good The Walls Whereever Required. ( 610X510x200mm ) . 2142 Providing Offixing Of Sanitary Items As Under:Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc.:15 Mm Dia. Nominal Bore 2143 Providing And Fixing Brass Bib Cock Of Approved Quality.15 Mm Nominal Bore 2144 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931 2145 Providing And Fixing 15 Mm Nominal Bore Of Standard Back Type C.P.Brass Close Hole Basin Mixer Pillar Tap Of Approved Quality And Make, Weighing Not Less Than 1.970 Kg. 2146 Providing & Fixing Of Sanitary Items Like, , A Soap Case Anda Towel Rod, Holders, Mirror With Mirror Shelf Incl Cost Of Screws Etc Complete Job . 2147 Providing Of Lighting Electric Points Incl. Cost Of Wiring, Earthing, Switches, Mcbs, Led Luminaries And Cost Of Wiring From 1.5Mm Thick Prf Coil. ( All The Items Should Confirm To The Is Codes From Reputed Manufacturer Such As Havells / L&T / Polycab / Legrand.Complete Job. 2148 Providing, Installation And Testing Of Heating Pointsincl. Cost Of Wiring, Earthing, Switches, Mcbs, Switch Boards And All Accessories Cost Of Wiring From 1.5Mm Thick Prf Coil. ( All The Items Should Confirm To The Is Codes From Reputed Manufacturer Such As Havells / L&T / Polycab / Legrand.Complete Job. 2149 Providing Of 10Mm Thick Service Line Of Reputed Make: Havells / L&T / Polycab / Legrand. 2150 Providing & Fixing Ofhardware Items Like Hinges, Handles Tower Bolts Of Isi Make For Doors & Ventilators Incl Cost Of Screws Etc.Complete Job.. 2151 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Waterstorage Tank Isi : 12701 Marked, With Cover And Suitable Lockingarrangement And Making Necessary Holes For Inlet, Outlet And Overflowpipes But Without Fittings And The Base Support For Tank 2152 Construction Of Soakage Pit 10 Mtrs Deep, One Mtr Diameter Includingproviding / Fixing Of Pre Cast Reinforced Concreterings And Top Precast Coverat Site As Per The Satisfaction Of Engineer In Charge.Complete Job. 2153 P / F Of Heavy Qualitypvc Fittings Of Isi Mark ( Prince Make ) Of 100Mm Dia Forpantry / Bath Rooms / Latrine Complete Incl. Bends Traps, P-Traps , Pipe Upto Septic Tank / Soakage Pit.Complete Job. 2154 Carriage Of Material From Different Sources Upto Site Of Work Incl. Loading, Unloading & Stacking Complete.Cement & Steelfor An Avg. Lead Of 10 Kms. 2155 Sand &Stone Aggregates For An Avg. Lead Of 45 Kms. 2156 Stone Soling For An Avg. Lead Of 15 Km 2157 Bricks For An Avg. Lead Of 45 Kms. 2158 18. ( Part A ) Wss Bulbul Nowgam ( Adv. Cost Rs. 40, 75, 270 / - ) 2159 Supply, Installation, Testing & Commissioning Ofopen Submersible Pumping Unit ( Verticle ) As Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 10000-14000 Gphhead Range= 45-60 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Openwellsubmersible Pump ( Verticle ) Type Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 20.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clauseof Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 2160 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2161 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2162 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2163 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2164 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2165 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2166 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2167 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2168 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2169 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2170 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2171 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2172 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2173 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2174 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 2175 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2176 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2177 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2178 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2179 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2180 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2181 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2182 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2183 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2184 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2185 Providing And Fitting Of Pg Clamps 2186 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2187 Painting Of Poles Red Oxide 2188 Painting Of Poles Aluminum Paint 2189 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2190 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 2191 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2192 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2193 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Details / Technical Specification Are As Per Clause 42 Ofsbd 2194 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2195 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 2196 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2197 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 50 Sqmm, 3.5Core, Ltcable 2198 Ii ) 10 Sqmm, 2 Core, Ltcable 2199 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 2200 Providing And Fitting Of 50 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2201 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2202 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2203 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2204 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2205 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2206 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2207 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2208 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2209 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2210 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2211 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2212 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2213 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2214 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2215 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2216 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2217 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2218 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2219 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 40 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2220 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2221 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2222 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2223 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 2224 ( Part B ) Pump House Of Wss Bulbul Nowgam ( Adv. Cost Rs. 17, 91, 363 / - ) 2225 Earth Work In Excavation Over Areas Exceeding 30 Cm And Upto 1.5 M In Depth 1.5 M In Width As Well As 10 Sqm On Plan Inculding Disposal Of Excavated Soil Upto1mt From Cutting Edge. All Kinds Of Soil 2226 Extra For Every Additional Lift Of 1.5M Or Part Thereoff. 2227 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2228 Providing And Laying Of1:4:8 Nominal Mix Cement Concrete . 2229 Reinforced Cement Concrete Of Specified Grade In 1:1.5:3 Nominal Mix In Suspended Floors Etc 2230 Centering And Shuttering Including Struting Proping And Removal Of Form Work.A ) Beams, Lintels Etc 2231 B ) Suspended Floors, Roofs, Landings Etc 2232 C ) Edges Of Slabs & Breaks In Floor Walls 2233 Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement. 2234 15Mm Cement Plaster In 1:6 Nominal Mix. 2235 Providing Reinforcement To Rcc Works Including Bending, Binding, Cuttingstratining And Placing In Position Complete. 2236 R.R. Masonary With Quary Stone Laid In Dry. 2237 Structural Steel Works Welded In Builtup Sections, Trusses And Framed Works Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Metal Primer Complete. 2238 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 2239 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 2240 Pointing On Stone Work With Cement Mortar In 1:3 Mix. ( Flush Type ) 2241 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 2242 Extra Over Brickwork In Super Structure Upto Floor V Level. 2243 Providing And Fixing Of Wooden Chowkat In Kail Wood. 2244 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 2245 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 2246 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 2247 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 2248 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 2249 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 2250 Providing & Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With S Or P Trap Including Dismantling Of Old Wc Seat And S Or P Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge. 2251 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 2252 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 2253 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 2254 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 2255 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 2256 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kail Wood ( 250 X 32 ) 2257 Supply And Fixing Rolling Shutter Of Approved Make Made Of Required Size Ms Lathes Interlocked Together Through Their Entire Length Etc. Complete With 80X 1.25 Mm M / S Laths With 1.25 Mm Thick Top Cover. 2258 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 2259 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 2260 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 2261 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Lincludingpriming Coat Lof Approved Brand And Manufacture. 2262 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 2263 Carriage Of Material From Source To Dumping Site At Road By Mechnical Transport.A ) Cement / Steel ( 25 Km ) 2264 B ) Sand ( 40 Km ) 2265 C ) 20 Mm Aggregate ( 25 Km ) ` 2266 D ) 40 Mm Aggregate ( 25 Km ) 2267 E ) Stone Solling ( 10 Km Average ) 2268 F ) Quarry Stone ( 20 Km Average ) 2269 G ) Bricks ( Average 20 Km ) 2270 19. ( Part A ) Wss Grendwan ( Adv. Cost Rs. 56, 94, 585 / - ) 2271 Supply, Installation, Testing & Commissioning Ofbore Well Submersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 2000-4000 Gphhead Range= 220 -270Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Bore Well Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 20.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Tube Well Has Not Been Drilled As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Its Success Ful Boring. 2272 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 65Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2273 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 65Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2274 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2275 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2276 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2277 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2278 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2279 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 65Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2280 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn65pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2281 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 65 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2282 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2283 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 65Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2284 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 65 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2285 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2286 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2287 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2288 Supply, Installation And Testing Ofmotorized Chain Hoist With Hook Suspension Alongtravelling Trolley Of Proper Specificationscapacity =5 Tonhoisting Speed =2.4 M / Minhoist Motor H.P=As Per Requirementno. Of Chain Falls=4Min. Height Of Lift =6 Mrest Of Specification As Per Cluase 25 Of Sbd 2289 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2290 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2291 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2292 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2293 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2294 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2295 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2296 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2297 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2298 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2299 Providing And Fitting Of Pg Clamps 2300 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2301 Painting Of Poles Red Oxide 2302 Painting Of Poles Aluminum Paint 2303 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2304 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 2305 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2306 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2307 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2308 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2309 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 2310 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2311 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 35 Sqmm , 3.5Core, Ltcable 2312 Ii ) 10Sqmm, 2 Core, Ltcable 2313 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 2314 Providing And Fitting Of 50 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2315 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2316 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2317 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2318 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2319 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2320 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2321 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2322 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2323 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2324 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2325 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2326 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2327 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2328 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2329 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2330 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2331 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2332 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2333 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 40 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2334 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2335 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2336 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole, 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2337 Carriage Of Sand, Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 2338 ( Part B ) Pump House Of Wss Grendwan ( Adv. Cost Rs. 15, 77, 143 / - ) 2339 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 2340 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material : All Kinds Of Soil 2341 Providing And Laying Of Dry Stone Solling Tightly Hand Packed On Horizontal Levels. 2342 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2343 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2344 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2345 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2346 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 2347 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 2348 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2349 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2350 1 : 4 ( 1 Cement : 4 Fine Sand ) 2351 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2352 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2353 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2354 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2355 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2356 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 2357 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2358 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2359 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2360 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2361 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2362 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2363 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2364 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2365 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2366 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) Upto Plinth Level And Curing Complete With: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2367 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone. 2368 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2369 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Whereverrequired. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 2370 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 2371 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 2372 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2373 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2374 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2375 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 2376 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 30 Kms ) 2377 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 30 Kms ) 2378 Stone Aggregate 40 Mm Nominal Size And Above ( 30 Kms ) 2379 Quarry Stone ( 10 Kms ) 2380 Bricks ( 35 Kms ) 2381 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 2382 Steel ( 400 M ) 2383 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 2384 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 2385 Stone Soling / Stones ( 400 M ) 2386 Bricks ( 400 M ) 2387 20. ( Part A ) Wss Halwani ( Adv. Cost Rs. 53, 21, 725 / - ) 2388 Supply, Installation, Testing & Commissioning Of Open Wellverticle Submersible Pumping Unitas Per Is 14220For With Following Specification Are As Under :Pump : Discharge Range = 3000-5000 Gphhead Range= 100- 130 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Openwell Verticle Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 15.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 4 Of Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 2389 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 80Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2390 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 80Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2391 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2392 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2393 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2394 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2395 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2396 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 80Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2397 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn 80Pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2398 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 80 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2399 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2400 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2401 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2402 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2403 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2404 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2405 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 2406 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 25 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2407 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2408 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2409 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2410 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2411 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2412 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2413 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2414 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2415 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2416 Providing And Fitting Of Pg Clamps 2417 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2418 Painting Of Poles Red Oxide 2419 Painting Of Poles Aluminum Paint 2420 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2421 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 2422 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2423 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2424 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 25 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2425 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2426 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 2427 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2428 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 35 Sqmm , 3.5Core, Ltcable 2429 Ii ) 10Sqmm, 2 Core, Ltcable 2430 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 2431 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2432 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2433 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2434 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2435 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2436 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2437 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2438 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2439 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2440 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen. Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2441 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2442 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2443 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2444 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2445 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2446 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2447 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2448 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2449 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2450 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 25 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2451 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2452 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2453 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2454 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 2455 ( Part B ) Pump House Of Wss Halwani ( Adv. Cost Rs. 16, 15, 505 / - ) 2456 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 2457 Ordinary Rock 2458 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 2459 Ordinary Rock 2460 Providing And Laying Of Dry Stone Solling Tightly Hand Packed On Horizontal Levels. 2461 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2462 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2463 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2464 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2465 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 2466 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Waterproofing Ply 12 Mm Thick 2467 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2468 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2469 1 : 4 ( 1 Cement : 4 Fine Sand ) 2470 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2471 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2472 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2473 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2474 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2475 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 2476 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2477 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2478 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2479 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2480 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2481 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2482 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2483 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2484 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2485 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 2486 R R Masonary With Quary Stone Laid In 1:6 Cm 2487 R R Masonary With Quary Stone Laid In Dry 2488 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 2489 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 2490 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2491 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 2492 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2493 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2494 Plumbing And Electrfication And Iron Grills To Windows To The Quarter ( To Be Paid Actual ) 2495 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2496 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 2497 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 2498 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 2499 Stone Soling / Stones ( 35 Kms ) 2500 Bricks ( 35 Kms ) 2501 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 2502 Steel ( 400 M ) 2503 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 2504 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 2505 Stone Soling ( 400 M ) 2506 Bricks ( 400 M ) 2507 21. ( Part A ) Wss Ganiegund Nagbal ( Adv. Cost Rs. 69, 96, 333 / - ) 2508 Supply, Installation, Testing & Commissioning Ofbore Well Submersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 5000- 7000 Gphhead Range= 260-295Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Bore Well Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 50.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Tube Well Has Not Been Drilled As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Its Success Ful Boring. 2509 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 80Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2510 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 80Class: C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 2511 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2512 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2513 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2514 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2515 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2516 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 80 C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2517 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn80pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2518 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 80 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2519 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2520 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2521 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2522 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2523 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2524 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2525 Supply, Installation And Testing Ofmotorized Chain Hoist With Hook Suspension Alongtravelling Trolley Of Proper Specificationscapacity =5 Tonhoisting Speed =2.4 M / Minhoist Motor H.P=As Per Requirementno. Of Chain Falls=4Min. Height Of Lift =6 Mrest Of Specification As Per Cluase 25 Of Sbd 2526 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2527 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2528 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2529 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2530 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2531 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2532 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2533 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2534 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2535 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2536 Providing And Fitting Of Pg Clamps 2537 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2538 Painting Of Poles Red Oxide 2539 Painting Of Poles Aluminum Paint 2540 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2541 Supply, Installation And Testing Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×50 With Reinforced Wirephases:Red, Yellow, Blue 2542 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2543 P / F Of 11 Kv Cable Termination Kit Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) As Per Details In Clause41 Ofsbd 2544 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 100 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2545 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2546 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G75 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( H ) Ofsbd 2547 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::75 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2548 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 95 Sqmm , 3.5Core, Ltcable 2549 Ii ) 10Sqmm, 2 Core, Ltcable 2550 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 25 Sq.Mm 2551 Providing And Fitting Of 70 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2552 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2553 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2554 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2555 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2556 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2557 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2558 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2559 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2560 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2561 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2562 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2563 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2564 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2565 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2566 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2567 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2568 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2569 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2570 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 100 Kva , Watercooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2571 Providing And Fitting Of L.T50 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2572 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2573 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2574 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2575 ( Part B ) Pump House Of Wss Ganaigund Nagbal ( Adv. Cost Rs. 16, 03, 096 / - ) 2576 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 2577 Ordinary Rock 2578 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 2579 Ordinary Rock 2580 Providing And Laying Of Dry Stone Solling Tightly Hand Packed On Horizontal Levels. 2581 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2582 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2583 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2584 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2585 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 2586 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Water Proofing Ply 12 Mm Thick 2587 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2588 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2589 1 : 4 ( 1 Cement : 4 Fine Sand ) 2590 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2591 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2592 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2593 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2594 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2595 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 2596 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2597 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2598 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2599 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2600 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2601 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2602 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2603 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2604 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2605 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 2606 R R Masonary With Quary Stone Laid In 1:6 Cm 2607 R R Masonary With Quary Stone Laid In Dry 2608 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 2609 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 2610 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2611 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2612 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2613 Plumbing And Electrfication And Iron Grills To Windows To The Quarter ( To Be Paid Actual ) 2614 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2615 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 2616 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 2617 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 2618 Stone Soling / Stones ( 35 Kms ) 2619 Bricks ( 35 Kms ) 2620 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 2621 Steel ( 400 M ) 2622 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 2623 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 2624 Stone Soling ( 400 M ) 2625 Bricks ( 400 M ) 2626 22. ( Part A ) Wss Halwani Cherward ( Adv. Cost Rs. 47, 20, 521 / - ) 2627 Supply, Installation, Testing & Commissioning Ofsubmersible Pumping Unitas Per Is 14220For With Following Specification Are As Under :Pump : Discharge Range = 2000- 4000 Gphhead Range= 110-135 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 10.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 2628 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 65Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2629 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 65Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2630 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2631 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2632 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2633 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2634 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2635 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 65Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2636 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn65pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2637 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 65 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2638 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2639 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 65Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2640 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 65 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2641 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2642 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2643 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2644 Supply, Installation And Testing Ofmotorized Chain Hoist With Hook Suspension Alongtravelling Trolley Of Proper Specificationscapacity =5 Tonhoisting Speed =2.4 M / Minhoist Motor H.P=As Per Requirementno. Of Chain Falls=4Min. Height Of Lift =6 Mrest Of Specification As Per Cluase 25 Of Sbd 2645 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 25 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2646 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2647 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2648 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2649 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2650 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2651 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2652 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2653 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2654 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2655 Providing And Fitting Of Pg Clamps 2656 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2657 Painting Of Poles Red Oxide 2658 Painting Of Poles Aluminum Paint 2659 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2660 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 2661 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2662 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2663 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 25 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2664 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2665 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G15 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( C ) Ofsbd 2666 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::25 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2667 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 35 Sqmm , 3.5Core, Ltcable 2668 Ii ) 10Sqmm, 2 Core, Ltcable 2669 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 2670 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2671 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2672 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2673 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2674 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2675 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2676 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2677 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2678 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2679 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2680 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2681 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2682 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2683 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2684 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2685 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2686 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2687 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2688 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2689 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 25 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2690 Providing And Fitting Of L.T25 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2691 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2692 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2693 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 2694 ( Part B ) Pump House Of Wss Halwani Cherward ( Adv. Cost Rs. 16, 15, 507 / - ) 2695 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 2696 Ordinary Rock 2697 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 2698 Ordinary Rock 2699 Providing And Laying Of Dry Stone Solling Tightly Hand Packed On Horizontal Levels. 2700 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2701 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2702 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2703 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2704 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 2705 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Waterproofing Ply 12 Mm Thick 2706 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2707 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2708 1 : 4 ( 1 Cement : 4 Fine Sand ) 2709 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2710 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2711 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2712 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2713 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2714 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 2715 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2716 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2717 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2718 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2719 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2720 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2721 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2722 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2723 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2724 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 2725 R R Masonary With Quary Stone Laid In 1:6 Cm 2726 R R Masonary With Quary Stone Laid In Dry 2727 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 2728 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 2729 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2730 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 2731 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2732 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2733 Plumbing And Electrfication And Iron Grills To Windows To The Quarter ( To Be Paid Actual ) 2734 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2735 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 2736 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 2737 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 2738 Stone Soling / Stones ( 35 Kms ) 2739 Bricks ( 35 Kms ) 2740 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 2741 Steel ( 400 M ) 2742 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 2743 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 2744 Stone Soling ( 400 M ) 2745 Bricks ( 400 M ) 2746 23. ( Part A ) Wss Reshkulbal ( Adv. Cost Rs. 61, 75, 671 / - ) 2747 Supply, Installation, Testing & Commissioning Ofbore Well Submersible Pump Unitas Peris 8034 With Followingspecification As Under For Stage-I:Pump : Rated Dischage = 3000Gphrated Head = 117 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Bore Well Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 10Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbd 2748 Supply, Installation, Testing & Commissioning Ofbore Well Submersible Pump Unitas Peris 8034 With Followingspecification As Under For Stage-Ii :Pump : Rated Dischage = 3000Gphrated Head = 191 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Bore Well Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating=17.50 As Per Oem Method Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbd 2749 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: 65Class:B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2750 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: 65Class:B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2751 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2752 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2753 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2754 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2755 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2756 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: 65Class:B ( Medium ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2757 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn 65Pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2758 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 65 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2759 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 25Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2760 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 65Class: Brest Of Specification / Details Areas Per Clause 15 Of Sbd 2761 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 65 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2762 Fabrication Of Gantry Mechanism / Cgi Shed / Platformby Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded.The Drawings And Dimensions For Gantry / Cgi Shed / Platform Will Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 17 Of Sbd 2763 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2764 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2765 Supply, Installation And Testing Ofmotorized Chain Hoist With Hook Suspension Alongtravelling Trolley Of Proper Specificationscapacity =5 Tonhoisting Speed =2.4 M / Minhoist Motor H.P=As Per Requirementno. Of Chain Falls=4Min. Height Of Lift =6 Mrest Of Specification As Per Cluase 25 Of Sbd 2766 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 2767 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2768 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2769 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2770 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2771 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2772 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2773 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2774 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2775 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2776 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2777 Providing And Fitting Of Pg Clamps 2778 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2779 Painting Of Poles Red Oxide 2780 Painting Of Poles Aluminum Paint 2781 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2782 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 2783 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2784 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2785 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2786 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2787 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G20 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( D ) Ofsbd 2788 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2789 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 35 Sqmm , 3.5Core, Ltcable 2790 Ii ) 10 Sqmm, 2 Core, Ltcable 2791 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 2792 Providing And Fitting Of25 Mm Square Single Core Copper Cable For Intwrconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2793 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2794 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2795 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49Of Sbd 2796 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2797 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2798 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2799 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2800 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2801 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2802 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2803 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2804 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2805 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2806 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2807 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2808 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2809 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2810 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2811 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 62.50 Kva , Water Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 67 Of Sbd 2812 Providing And Fitting Of L.T50 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2813 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2814 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2815 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 2816 ( Part B ) Pump House Of Wss Reshkulbal ( Adv. Cost Rs. 14, 63, 203 / - ) 2817 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan , Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M , Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2818 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 2819 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2820 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2821 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2822 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2823 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2824 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 2825 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 2826 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2827 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2828 1 : 4 ( 1 Cement : 4 Fine Sand ) 2829 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2830 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2831 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2832 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2833 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2834 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kail Wood250x32 Mm ( Nominal Size ) 2835 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2836 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2837 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2838 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2839 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2840 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2841 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2842 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2843 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2844 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone. 2845 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2846 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 2847 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 2848 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 2849 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2850 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2851 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2852 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 2853 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) Upto Plinth Level And Curing Complete With: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2854 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete 2855 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 2856 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 2857 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 2858 Bricks ( 35 Kms ) 2859 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 200 M ) 2860 Steel ( 200 M ) 2861 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 200 M ) 2862 Stone Aggregate 40 Mm Nominal Size And Above ( 200 M ) 2863 Stone Soling / Stones ( 200 M ) 2864 Bricks ( 200 M ) 2865 24. ( Part A ) Wss Brad Ikhrajpora ( Adv. Cost Rs. 65, 30, 800 / - ) 2866 Supply, Installation, Testing & Commissioning Ofsubmersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 20000 Gphhead Range=87 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Submersible Pump ( Less Stages ) Type Of Fluid To Be Handled=Clear Watermotor:-Motor Rating=As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Site Has Not Been Decided As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actualparametres Obtained After Its Successful Preparation Of Site. 2867 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 150Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2868 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 150Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2869 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2870 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2871 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2872 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2873 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2874 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 150Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2875 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn150pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2876 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 150 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2877 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2878 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 150Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2879 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 150 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2880 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2881 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2882 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2883 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =3 Tonrest Of Specification As Per Cluase 24 Of Sbd 2884 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 2885 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 2886 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 2887 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 2888 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 2889 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 2890 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 2891 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 2892 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 2893 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 2894 Providing And Fitting Of Pg Clamps 2895 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 2896 Painting Of Poles Red Oxide 2897 Painting Of Poles Aluminum Paint 2898 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 2899 Supply, Installation And Testing Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×50 With Reinforced Wirephases:Red, Yellow, Blue 2900 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 2901 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 2902 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 100 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 2903 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 2904 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G75 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( H ) Ofsbd 2905 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::75 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 2906 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 95 Sqmm , 3.5Core, Ltcable 2907 Ii ) 10Sqmm, 2 Core, Ltcable 2908 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 25 Sq.Mm 2909 Providing And Fitting Of 50 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 2910 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 2911 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 2912 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 2913 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 2914 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 2915 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 2916 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 2917 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 2918 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 2919 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 2920 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 2921 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 2922 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 2923 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 2924 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 2925 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 2926 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 2927 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 2928 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 100 Kva , Water Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 2929 Providing And Fitting Of L.T50 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 2930 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 2931 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 2932 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 2933 ( Part B ) Pump House Of Wss Brad Ikhrajpora ( Adv. Cost Rs. 16, 17, 603 / - ) 2934 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2935 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 2936 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2937 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 2938 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 2939 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2940 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 2941 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 2942 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 2943 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 2944 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 2945 1 : 4 ( 1 Cement : 4 Fine Sand ) 2946 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 2947 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 2948 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 2949 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2950 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 2951 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kail Wood250x32 Mm ( Nominal Size ) 2952 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 2953 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 2954 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 2955 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 2956 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 2957 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 2958 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 2959 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 2960 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 2961 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) Upto Plinth Level And Curing Complete With:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 2962 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone. 2963 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 2964 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 2965 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 2966 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 2967 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 2968 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 2969 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 2970 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 32 Kms ) 2971 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 30 Kms ) 2972 Stone Aggregate 40 Mm Nominal Size And Above ( 30 Kms ) 2973 Quarry Stone ( 10 Kms ) 2974 Bricks ( 35 Kms ) 2975 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 800 M ) 2976 Steel ( 800 M ) 2977 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 800 M ) 2978 Stone Aggregate 40 Mm Nominal Size And Above ( 800 M ) 2979 Stone Soling / Stones ( 800 M ) 2980 Bricks ( 800 M ) 2981 25. ( Part A ) Wss Upgradation Salia ( Adv. Cost Rs. 59, 18, 905 / - ) 2982 Supply, Installation, Testing & Commissioning Ofsubmersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 20000 Gphhead Range=55-65 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 35.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Site Has Not Been Decided As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actualparametres Obtained After Its Successful Preparation Of Site. 2983 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 150Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 2984 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 150Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 2985 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 2986 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 2987 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 2988 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 2989 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 2990 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 150Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 2991 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn150pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 2992 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 150 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 2993 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 2994 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 150Rest Of Specification / Details Areas Per Clause 15 Of Sbd 2995 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 150 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 2996 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 2997 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 2998 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 2999 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =3 Tonrest Of Specification As Per Cluase 24 Of Sbd 3000 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3001 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3002 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3003 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3004 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3005 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3006 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3007 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3008 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3009 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3010 Providing And Fitting Of Pg Clamps 3011 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3012 Painting Of Poles Red Oxide 3013 Painting Of Poles Aluminum Paint 3014 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3015 Supply, Installation And Testing Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×50 With Reinforced Wirephases:Red, Yellow, Blue 3016 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3017 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3018 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 100 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3019 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3020 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G50 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( H ) Ofsbd 3021 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::75 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3022 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 95 Sqmm, 3.5Core, Ltcable 3023 Ii ) 10 Sqmm, 2 Core, Ltcable 3024 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 25 Sq.Mm 3025 Providing And Fitting Of 50 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3026 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3027 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3028 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3029 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3030 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3031 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3032 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3033 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3034 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmenrest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3035 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3036 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3037 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3038 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3039 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3040 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3041 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3042 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3043 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3044 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 62.50 Kva , Water Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3045 Providing And Fitting Of L.T50 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3046 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3047 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3048 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3049 ( Part B ) Pump House Of Wss Upgradation Salia ( Adv. Cost Rs. 16, 39, 550 / - ) 3050 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3051 Ordinary Rock 3052 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3053 Ordinary Rock 3054 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3055 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3056 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 3057 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 3058 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 3059 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 3060 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Water Proofing Ply 12 Mm Thick 3061 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 3062 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 3063 1 : 4 ( 1 Cement : 4 Fine Sand ) 3064 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 3065 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 3066 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 3067 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3068 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3069 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 3070 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 3071 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 3072 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 3073 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 3074 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 3075 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 3076 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 3077 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 3078 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 3079 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 3080 R R Masonary With Quary Stone Laid In 1:6 Cm 3081 R R Masonary With Quary Stone Laid In Dry 3082 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 3083 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 3084 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 3085 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 3086 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 3087 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 3088 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 3089 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 3090 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 3091 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 3092 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 3093 Stone Soling / Stones ( 35 Kms ) 3094 Bricks ( 35 Kms ) 3095 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 3096 Steel ( 400 M ) 3097 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 3098 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 3099 Stone Soling ( 400 M ) 3100 Bricks ( 400 M ) 3101 26. ( Part A ) Wss Nowgam Manzigam ( Adv. Cost Rs. 51, 28, 266 / - ) 3102 Supply, Installation, Testing & Commissioning Ofsubmersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 6000-8000 Gphhead Range=100-120 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 25.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Site Has Not Been Decided As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actualparametres Obtained After Its Successful Preparation Of Ste 3103 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3104 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 3105 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3106 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3107 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3108 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3109 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3110 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3111 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3112 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3113 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3114 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3115 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3116 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3117 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3118 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3119 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3120 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3121 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3122 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3123 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3124 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3125 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3126 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3127 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3128 Providing And Fitting Of Pg Clamps 3129 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3130 Painting Of Poles Red Oxide 3131 Painting Of Poles Aluminum Paint 3132 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3133 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 3134 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3135 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3136 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3137 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3138 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 3139 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3140 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.I ) 35 Sqmm, 3.5Core, Ltcable 3141 Ii ) 10 Sqmm, 2 Core, Ltcable 3142 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 3143 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3144 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3145 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3146 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3147 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3148 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3149 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3150 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3151 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3152 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen.Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3153 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3154 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3155 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3156 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3157 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3158 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3159 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3160 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3161 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3162 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 50 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3163 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3164 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3165 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3166 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3167 ( Part B ) Pump House Of Wss Nowgam Manzigam ( Adv. Cost Rs. 16, 39, 550 / - ) 3168 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3169 Ordinary Rock 3170 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3171 Ordinary Rock 3172 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3173 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3174 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 3175 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 3176 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 3177 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 3178 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Water Proofing Ply 12 Mm Thick 3179 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 3180 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 3181 1 : 4 ( 1 Cement : 4 Fine Sand ) 3182 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 3183 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 3184 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 3185 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3186 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3187 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 3188 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 3189 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 3190 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 3191 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 3192 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 3193 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 3194 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 3195 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 3196 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 3197 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 3198 R R Masonary With Quary Stone Laid In 1:6 Cm 3199 R R Masonary With Quary Stone Laid In Dry 3200 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 3201 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 3202 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 3203 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 3204 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 3205 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 3206 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 3207 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 3208 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 3209 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 3210 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 3211 Stone Soling / Stones ( 35 Kms ) 3212 Bricks ( 35 Kms ) 3213 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 3214 Steel ( 400 M ) 3215 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 3216 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 3217 Stone Soling ( 400 M ) 3218 Bricks ( 400 M ) 3219 27. ( Part A ) Wss Thalnag Mahind ( Adv. Cost Rs. 55, 69, 646 / - ) 3220 Supply, Installation, Testing & Commissioning Ofsubmersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 7000-9000 Gphhead Range= 95-115 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 30.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbdnote. Since The Tube Well Has Not Been Drilled As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Its Successful Boring. 3221 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3222 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 3223 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3224 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3225 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3226 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3227 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3228 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3229 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3230 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3231 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3232 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3233 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3234 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3235 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3236 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3237 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3238 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3239 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3240 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3241 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3242 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3243 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3244 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3245 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3246 Providing And Fitting Of Pg Clamps 3247 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3248 Painting Of Poles Red Oxide 3249 Painting Of Poles Aluminum Paint 3250 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3251 Supply, Installation And Testing Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×50 With Reinforced Wirephases:Red, Yellow, Blue 3252 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 50 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3253 P / F Of 11 Kv Cable Termination Kit Foe 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) As Per Details In Clause41 Ofsbd 3254 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3255 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3256 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G40 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( F ) Ofsbd 3257 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3258 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 50 Sqmm, 3.5Core, Ltcable 3259 Ii ) 10 Sqmm, 2 Core, Ltcable 3260 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbdsize: 16 Sq.Mm 3261 Providing And Fitting Of 35 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3262 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3263 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3264 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49Of Sbd 3265 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3266 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3267 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3268 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3269 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3270 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3271 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3272 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3273 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3274 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3275 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3276 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3277 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3278 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3279 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3280 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 50 Kva , Water Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3281 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3282 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3283 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3284 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3285 ( Part B ) Pump House Of Wss Thalnag Mahind ( Adv. Cost Rs. 15, 72, 792 / - ) 3286 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3287 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3288 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3289 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3290 Providing Reinforcement To Rcc Works Including Bending, Binding, Cutting, Straitening And Placing In Position Complete. 3291 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3292 Polygonal R.R. Masonary With Quary Stone Hard Laid In Dry. 3293 Providing And Fixing Of Chain Link Fencing. 3294 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3295 Pointing On Stone Work With Cement Mortar In 1:3 Mix. ( Flush Type ) 3296 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3297 Extra Over Brickwork In Super Structure Upto Floor V Level. 3298 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3299 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3300 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3301 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3302 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3303 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3304 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3305 Providing And Laying / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 3306 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 3307 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3308 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3309 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3310 Providing, Hoisting And Fixing Trusses Purlins Rafters, Joists Etc In Ist Class Budloo Wood 3311 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3312 Providing And Fixing Of M.S Evesboarding300mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job. 3313 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3314 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3315 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3316 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Lincludingpriming Coat Lof Approved Brand And Manufacture. 3317 Provision Of Handles, Tower Bolts Etc For Doors, Windows 3318 Provision For Installation Of All Types Of Sanitary Tile Work In Bath Room Incl Providing And Fixing Water Closset Suitting Parts For Bathroom With 10Ltr Low Level Flushing Cistern And Stainless Steel Kitchen Sink 3319 Providing And Fitting Of Triple Layer Water Storage Tank Of 1000 Ltr Capacity Of Approved Brand And Manufacture 3320 P / F Of Electrical Fittings Complete Job 3321 Providing And Laying In Position Specified Grade Of Cement Concrete In 1:2:4 Nominal Mix. 3322 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 12 Kms ) 3323 B ) Sand ( 12 Km ) 3324 C ) 20 Mm Aggregate ( 30 Km ) ` 3325 D ) 40 Mm Aggregate ( 30 Km ) 3326 E ) Stone Solling ( 15 Km Average ) 3327 F ) Quarry Stone ( 10 Km Average ) 3328 L ) Bricks ( Average 10 Km ) 3329 Extra Carriage Of Pipes From Nearest Dumping Site To Actual Site Of Work By Manual Labour Fora ) Cement / Steel ( 1000M ) 3330 B ) Sand ( 1000 Mtr ) 3331 C ) 20 Mm Aggregate ( 1000 Mtr ) ` 3332 D ) 40 Mm Aggregate ( 1000 Mtr ) 3333 E ) Stone Solling ( 1000 Mtr Average ) 3334 F ) Quarry Stone ( 1000Mtr ) 3335 28. ( Part A ) Wss Sethar 1St ( Adv. Cost Rs. 37, 72, 688 / - ) 3336 Supply, Installation, Testing & Commissioning Of Non Clogpumping Unitas Per Is 5600For With Following Specification Are As Under :Pump : Discharge Range = 11000-135000 Gphhead Range= 20-35 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Non Clog Pumping Equipmenttype Of Fluid To Be Handled=Raw Watermotor:-Motor Rating= 12.50 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 2 Of Sbdnote. Since The Site Has Not Been Decided As Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actualparametres Obtained After Its Successful Preparation Of Ste. 3337 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 125Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3338 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 125Class:C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 3339 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3340 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3341 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3342 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3343 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3344 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 125Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3345 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn125pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3346 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 125 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3347 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3348 Fabrication , Providing And Fitting Of90-120 Degree Long Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 125Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3349 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 125 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3350 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3351 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 3352 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 3353 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3354 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3355 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3356 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3357 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3358 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3359 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3360 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3361 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3362 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3363 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3364 Providing And Fitting Of Pg Clamps 3365 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3366 Painting Of Poles Red Oxide 3367 Painting Of Poles Aluminum Paint 3368 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3369 Supply, Installation And Testing Of 50 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×50 With Reinforced Wirephases:Red, Yellow, Blue 3370 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3371 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3372 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 100 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3373 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3374 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G15 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( C ) Ofsbd 3375 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::25 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3376 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 95 Sqmm, 3.5Core, Ltcable 3377 Ii ) 10 Sqmm, 2 Core, Ltcable 3378 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 3379 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3380 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3381 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3382 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3383 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3384 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3385 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3386 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3387 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3388 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen . Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3389 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3390 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3391 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3392 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3393 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3394 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3395 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3396 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3397 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3398 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 50 Kva , Watercooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3399 Providing And Fitting Of L.T50 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3400 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3401 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3402 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3403 ( Part B ) Pump House Of Wss Sethar 1St ( Adv. Cost Rs. 15, 74, 033 / - ) 3404 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3405 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3406 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3407 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3408 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3409 Reinforced Cement Concrete Work In Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth & String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts & Struts Etc. Up To Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement 1:1:2 ( 1Cement, 1 Course Sand, 2Graded Crushed Stone ) Aggregate 20Mm Nominal Size. 3410 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:A ) Foundations 3411 B ) Walls 3412 12Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement, 4 Fine Sand ) . 3413 12 Mm Thick Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement ( 1 Cement, 3 Fine Sand ) . 3414 Providing Reinforcement To Rcc Works Including Bending, Binding, Cutting, Straitening And Placing In Position Complete. 3415 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3416 Polygonal R.R. Masonary With Quary Stone Hard Laid In Dry. 3417 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3418 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3419 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3420 Extra Over Brickwork In Super Structure Upto Floor V Level. 3421 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3422 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3423 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3424 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3425 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3426 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3427 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3428 Providing And Laying / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 3429 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 3430 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3431 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3432 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3433 Providing, Hoisting And Fixing Trusses Purlins Rafters, Joists Etc In Ist Class Budloo Wood 3434 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3435 Providing And Fixing Of M.S Evesboarding300mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job. 3436 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3437 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3438 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3439 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 3440 Provision Of Handles, Tower Bolts Etc For Doors, Windows 3441 Provision For Installation Of All Types Of Sanitary Tile Work In Bath Room Incl Providing And Fixing Water Closset Suitting Parts For Bathroom With 10Ltr Low Level Flushing Cistern And Stainless Steel Kitchen Sink 3442 Providing And Fitting Of Triple Layer Water Storage Tank Of 1000 Ltr Capacity Of Approved Brand And Manufacture 3443 P / F Of Electrical Fittings Complete Job 3444 Laying & Fittingof G.I Pipes .F ) 15 Mm G.I Pipe 3445 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport.A ) Cement / Steel ( 8 Km ) 3446 B ) Sand ( 2 Km ) 3447 C ) 20 Mm Aggregate ( 25 Km ) ` 3448 D ) 40 Mm Aggregate ( 25 Km ) 3449 E ) Stone Solling ( 10 Km Average ) 3450 F ) Quarry Stone ( 10 Km Average ) 3451 L ) Bricks ( Average 10 Km ) 3452 29. ( Part A ) Wss Sangam Sethar 2Nd ( Adv. Cost Rs. 25, 49, 170 / - ) 3453 Supply, Installation, Testing & Commissioning Of Open Wellsubmersible Pumping Unitas Per Is 14220For With Following Specification Are As Under :Pump : Discharge Range = 11000-135000 Gphhead Range= 25-50 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Openwell Submersible Pump Horizontaltype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 20 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 3 Of Sbdnote. Since The Site Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained 3454 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 125Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3455 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 125Class:C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 3456 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3457 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3458 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3459 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3460 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1: 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3461 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 125Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3462 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn125pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3463 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 125 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3464 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3465 Fabrication , Providing And Fitting Of90-120 Degree Long Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 125Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3466 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 125 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3467 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3468 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 3469 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 3470 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3471 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( C ) Ofsbd 3472 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::25 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3473 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 95 Sqmm, 3.5Core, Ltcable 3474 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd.Size: 10 Sq.Mm 3475 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3476 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3477 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3478 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3479 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3480 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3481 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3482 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3483 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3484 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen.Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3485 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3486 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3487 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3488 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3489 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3490 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3491 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3492 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3493 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3494 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3495 ( Part B ) Pump House Of Wss Sangam Sethar 2Nd ( Adv. Cost Rs. 15, 74, 033 / - ) 3496 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3497 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3498 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3499 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3500 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3501 Reinforced Cement Concrete Work In Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth & String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts & Struts Etc. Up To Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement 1:1:2 ( 1Cement, 1 Course Sand, 2Graded Crushed Stone ) Aggregate 20Mm Nominal Size. 3502 Centring And Shuttering Including Strutting Propping And Removal Of Form Work.A ) Foundations 3503 B ) Walls 3504 12Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement, 4 Fine Sand ) . 3505 12 Mm Thick Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement ( 1 Cement, 3 Fine Sand ) . 3506 Providing Reinforcement To Rcc Works Including Bending, Binding, Cutting, Straitening And Placing In Position Complete. 3507 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3508 Polygonal R.R. Masonary With Quary Stone Hard Laid In Dry. 3509 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3510 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3511 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3512 Extra Over Brickwork In Super Structure Upto Floor V Level. 3513 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3514 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3515 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3516 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3517 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3518 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3519 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3520 Providing And Laying / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 3521 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 3522 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3523 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3524 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3525 Providing, Hoisting And Fixing Trusses Purlins Rafters, Joists Etc In Ist Class Budloo Wood 3526 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3527 Providing And Fixing Of M.S Evesboarding300mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job. 3528 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3529 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3530 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3531 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 3532 Provision Of Handles, Tower Bolts Etc For Doors, Windows 3533 Provision For Installation Of All Types Of Sanitary Tile Work In Bath Room Incl Providing And Fixing Water Closset Suitting Parts For Bathroom With 10Ltr Low Level Flushing Cistern And Stainless Steel Kitchen Sink 3534 Providing And Fitting Of Triple Layer Water Storage Tank Of 1000 Ltr Capacity Of Approved Brand And Manufacture 3535 P / F Of Electrical Fittings Complete Job 3536 Laying & Fittingof G.I Pipes .15 Mm G.I Pipe 3537 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport.A ) Cement / Steel ( 8 Km ) 3538 B ) Sand ( 2 Km ) 3539 C ) 20 Mm Aggregate ( 25 Km ) ` 3540 D ) 40 Mm Aggregate ( 25 Km ) 3541 E ) Stone Solling ( 10 Km Average ) 3542 F ) Quarry Stone ( 10 Km Average ) 3543 L ) Bricks ( Average 10 Km ) 3544 30. ( Part A ) Wss Khanpora Kreeri 1St ( Adv. Cost Rs. 50, 00, 550 / - ) 3545 Supply, Installation, Testing & Commissioning Ofopen Submersible Pumping Unit ( Verticle ) As Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 6000-8000 Gphhead Range= 65-85 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Openwellsubmersible Pump ( Verticle ) Type Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 20.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clauseof Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 3546 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3547 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 3548 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3549 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3550 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3551 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3552 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3553 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3554 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3555 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3556 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3557 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3558 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3559 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3560 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3561 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3562 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3563 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3564 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3565 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3566 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3567 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3568 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3569 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3570 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3571 Providing And Fitting Of Pg Clamps 3572 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3573 Painting Of Poles Red Oxide 3574 Painting Of Poles Aluminum Paint 3575 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3576 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 3577 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3578 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3579 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3580 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3581 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 3582 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::50 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3583 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 50 Sqmm, 3.5Core, Ltcable 3584 Ii ) 10 Sqmm, 2 Core, Ltcable 3585 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 3586 Providing And Fitting Of 50 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3587 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3588 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3589 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3590 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3591 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3592 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3593 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3594 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3595 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen. Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3596 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3597 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3598 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3599 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3600 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3601 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3602 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3603 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3604 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3605 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 40 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3606 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3607 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3608 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3609 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 3610 ( Part B ) Pump House Of Wss Khanpora Kreeri 1St ( Adv. Cost Rs. 17, 91, 363 / - ) 3611 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3612 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3613 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3614 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3615 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3616 Centering And Shuttering Including Struting Proping And Removal Of Form Work.A ) Beams, Lintels Etc 3617 B ) Suspended Floors, Roofs, Landings Etc 3618 C ) Edges Of Slabs & Breaks In Floor Walls Under 20 Cm 3619 Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement. 3620 15Mm Cement Plaster In 1:6 Nominal Mix. 3621 Providing Reinforcement To Rcc Works Including Bending, Binding, Cuttingstratining And Placing In Position Complete. 3622 R.R. Masonary With Quary Stone Laid In Dry. 3623 Structural Steel Works Welded In Builtup Sections, Trusses And Framed Works Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Metal Primer Complete. 3624 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3625 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3626 Pointing On Stone Work With Cement Mortar In 1:3 Mix. ( Flush Type ) 3627 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3628 Extra Over Brickwork In Super Structure Upto Floor V Level. 3629 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3630 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3631 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3632 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3633 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3634 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3635 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3636 Providing & Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With S Or P Trap Including Dismantling Of Old Wc Seat And S Or P Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge. 3637 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 3638 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3639 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3640 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3641 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3642 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kail Wood ( 250 X 32 ) 3643 Supply And Fixing Rolling Shutter Of Approved Make Made Of Required Size Ms Lathes Interlocked Together Through Their Entire Length Etc. Complete With 80X 1.25 Mm M / S Laths With 1.25 Mm Thick Top Cover. 3644 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3645 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3646 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3647 Painting With Synthetic Enamal Paint Ofapproved Brand And Manufacture Of Required Colour To Give Even Shade Two Or More Coats On New Work Lincludingpriming Coat Lof Approved Brand And Manufacture. 3648 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 3649 Carriage Of Material From Source To Dumping Site At Road By Mechnical Transport.A ) Cement / Steel ( 25 Km ) 3650 B ) Sand ( 40 Km ) 3651 C ) 20 Mm Aggregate ( 25 Km ) ` 3652 D ) 40 Mm Aggregate ( 25 Km ) 3653 E ) Stone Solling ( 10 Km Average ) 3654 F ) Quarry Stone ( 20 Km Average ) 3655 G ) Bricks ( Average 20 Km ) 3656 31. ( Part A ) Wss Khanpora Kreeri-Ii ( Adv. Cost Rs. 42, 83, 905 / - ) 3657 Supply, Installation, Testing & Commissioning Of Open Wellverticle Submersible Pumping Unitas Per Is 14220For With Following Specification Are As Under :Pump : Discharge Range = 3000-5000 Gphhead Range= 100- 120 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Openwell Verticle Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 15.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 4 Of Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 3658 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 80Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3659 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 80Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 3660 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3661 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3662 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3663 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3664 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3665 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 80Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3666 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn 80Pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3667 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 80 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3668 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3669 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3670 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3671 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3672 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 3673 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 3674 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3675 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 25 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3676 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3677 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3678 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3679 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3680 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3681 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3682 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3683 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3684 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3685 Providing And Fitting Of Pg Clamps 3686 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3687 Painting Of Poles Red Oxide 3688 Painting Of Poles Aluminum Paint 3689 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3690 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 3691 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3692 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3693 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 25 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3694 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3695 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G30 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( E ) Ofsbd 3696 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3697 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 35 Sqmm , 3.5Core, Ltcable 3698 Ii ) 10Sqmm, 2 Core, Ltcable 3699 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 3700 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3701 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3702 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3703 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3704 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3705 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3706 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3707 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3708 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3709 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen.Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3710 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3711 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3712 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3713 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3714 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3715 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3716 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3717 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3718 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3719 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 25 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3720 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3721 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3722 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3723 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3724 ( Part B ) Pump House Of Wss Khanpora Kreeri-Ii ( Adv. Cost Rs. 16, 29, 793 / - ) 3725 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3726 Ordinary Rock 3727 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3728 Ordinary Rock 3729 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3730 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3731 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level With: 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 3732 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 3733 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 3734 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. 3735 Suspended Floors, Roofs, Landings, Balconies And Access Platform With Water Proofing Ply 12 Mm Thick 3736 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 3737 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix: 1 : 3 ( 1 Cement : 3 Fine Sand ) 3738 1 : 4 ( 1 Cement : 4 Fine Sand ) 3739 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 3740 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 3741 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 3742 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3743 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 3744 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 3745 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 3746 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 3747 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 3748 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 3749 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 3750 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 3751 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 3752 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 3753 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 3754 P / F Salem Stainless Steel Kitched Sink Sixe 610X510x200 3755 R R Masonary With Quary Stone Laid In 1:6 Cm 3756 R R Masonary With Quary Stone Laid In Dry 3757 Providing And Laying Of 50 Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix 3758 P / F Of Pvc Waste Pipe For Sink Incl Pvc Waste Fitting Complete 3759 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 3760 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 3761 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 3762 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 3763 Plumbing And Electrfication And Iron Grills To Windows To The Quarter ( To Be Paid Actual ) 3764 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 3765 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 3766 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 3767 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 3768 Stone Soling / Stones ( 35 Kms ) 3769 Bricks ( 35 Kms ) 3770 Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 3771 Steel ( 400 M ) 3772 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 3773 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 3774 Stone Soling ( 400 M ) 3775 Stone Soling ( 400 M ) 3776 Bricks ( 400 M ) 3777 32. ( Part A ) Wss Hassanpora Bagh-I ( Adv. Cost Rs. 36, 06, 541 / - ) 3778 Supply, Installation, Testing & Commissioning Ofnon-Clogpumping Unitas Per Is 5600For With Following Specification Are As Under :Pump : Discharge Range = 9000- 10000 Gphhead Range = 28-35 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Non- Clog Pumping Equipmenttype Of Fluid To Be Handled=Raw Watermotor:-Motor Rating= 15.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 2 Of Sbdnote.Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source 3779 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3780 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 3781 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3782 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3783 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3784 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3785 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3786 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3787 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3788 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3789 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3790 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3791 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3792 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3793 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 3794 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 3795 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3796 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3797 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3798 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3799 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3800 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3801 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3802 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3803 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3804 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3805 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3806 Providing And Fitting Of Pg Clamps 3807 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3808 Painting Of Poles Red Oxide 3809 Painting Of Poles Aluminum Paint 3810 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3811 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 3812 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3813 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3814 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3815 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3816 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G20 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( D ) Ofsbd 3817 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3818 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 50 Sqmm, 3.5Core, Ltcable 3819 Ii ) 10 Sqmm, 2 Core, Ltcable 3820 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 3821 Providing And Fitting Of 35 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3822 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3823 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3824 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3825 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3826 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3827 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3828 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3829 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3830 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmenrest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3831 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3832 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3833 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3834 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3835 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3836 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3837 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3838 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3839 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3840 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 50 Kva , Water Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 3841 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 3842 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 3843 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 3844 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3845 ( Part B ) Pump House Of Wss Hassanpora Bagh-I ( Adv. Cost Rs. 15, 74, 033 / - ) 3846 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3847 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3848 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3849 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3850 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3851 Reinforced Cement Concrete Work In Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth & String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts & Struts Etc. Up To Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement 1:1:2 ( 1Cement, 1 Course Sand, 2Graded Crushed Stone ) Aggregate 20Mm Nominal Size. 3852 Centring And Shuttering Including Strutting Propping And Removal Of Form Work.A ) Foundations 3853 B ) Walls 3854 12Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement, 4 Fine Sand ) . 3855 12 Mm Thick Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement ( 1 Cement, 3 Fine Sand ) . 3856 Providing Reinforcement To Rcc Works Including Bending, Binding, Cutting, Straitening And Placing In Position Complete. 3857 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3858 Polygonal R.R. Masonary With Quary Stone Hard Laid In Dry. 3859 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3860 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3861 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3862 Extra Over Brickwork In Super Structure Upto Floor V Level. 3863 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3864 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3865 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3866 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3867 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3868 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3869 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3870 Providing And Laying / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 3871 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 3872 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3873 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3874 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3875 Providing, Hoisting And Fixing Trusses Purlins Rafters, Joists Etc In Ist Class Budloo Wood 3876 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3877 Providing And Fixing Of M.S Evesboarding300mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job. 3878 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3879 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3880 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3881 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 3882 Provision Of Handles, Tower Bolts Etc For Doors, Windows 3883 Provision For Installation Of All Types Of Sanitary Tile Work In Bath Room Incl Providing And Fixing Water Closset Suitting Parts For Bathroom With 10Ltr Low Level Flushing Cistern And Stainless Steel Kitchen Sink 3884 Providing And Fitting Of Triple Layer Water Storage Tank Of 1000 Ltr Capacity Of Approved Brand And Manufacture 3885 P / F Of Electrical Fittings Complete Job 3886 Laying & Fittingof G.I Pipes .15 Mm G.I Pipe 3887 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport.A ) Cement / Steel ( 8 Km ) 3888 B ) Sand ( 2 Km ) 3889 C ) 20 Mm Aggregate ( 25 Km ) ` 3890 D ) 40 Mm Aggregate ( 25 Km ) 3891 E ) Stone Solling ( 10 Km Average ) 3892 F ) Quarry Stone ( 10 Km Average ) 3893 L ) Bricks ( Average 10 Km ) 3894 33. ( Part A ) Wss Hassanpora Bagh-Ii ( Adv. Cost Rs. 43, 82, 258 / - ) 3895 Supply, Installation, Testing & Commissioning Ofopenwell Submersible Pumping Unitas Per Is 14220 For With Following Specification Are As Under :Pump : Discharge Range = 9000- 10000 Gphhead Range = 40- 45 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Openwell Pumping Equipmenttype Of Fluid To Be Handled=Raw Watermotor:-Motor Rating= 10.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 3 Of Sbdnote.Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source 3896 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 3897 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 100Class: C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 3898 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 3899 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 3900 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 3901 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 3902 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 3903 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 3904 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn100pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 3905 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 100 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 3906 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 3907 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 100Rest Of Specification / Details Areas Per Clause 15 Of Sbd 3908 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 100 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 3909 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 3910 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 3911 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 3912 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 3913 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 3914 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 3915 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 3916 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 3917 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 3918 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 3919 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 3920 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 3921 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 3922 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 3923 Providing And Fitting Of Pg Clamps 3924 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 3925 Painting Of Poles Red Oxide 3926 Painting Of Poles Aluminum Paint 3927 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 3928 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 3929 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 3930 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 3931 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 3932 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 3933 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G20 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( D ) Ofsbd 3934 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 3935 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 50 Sqmm, 3.5Core, Ltcable 3936 Ii ) 10 Sqmm, 2 Core, Ltcable 3937 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 3938 Providing And Fitting Of 35 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 3939 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 3940 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 3941 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 3942 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 3943 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 3944 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 3945 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 3946 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 3947 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen.Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 3948 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 3949 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 3950 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 3951 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 3952 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 3953 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 3954 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 3955 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 3956 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 3957 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading, Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 3958 ( Part B ) Pump House Of Wss Hassanpora Bagh-Ii ( Adv. Cost Rs. 15, 74, 033 / - ) 3959 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 3960 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 3961 Providing And Laying Of Dry Stone Soling Tightly Hand Packed On Horizontal Levels. 3962 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 3963 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3964 Reinforced Cement Concrete Work In Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth & String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts & Struts Etc. Up To Floor Five Level Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement 1:1:2 ( 1Cement, 1 Course Sand, 2Graded Crushed Stone ) Aggregate 20Mm Nominal Size. 3965 Centring And Shuttering Including Strutting Propping And Removal Of Form Work.A ) Foundations 3966 B ) Walls 3967 12Mm Thick Cement Plaster In 1:4 Mix ( 1 Cement, 4 Fine Sand ) . 3968 12 Mm Thick Cement Plaster In 1:3 Mix With Floating Coat Of Neat Cement ( 1 Cement, 3 Fine Sand ) . 3969 Providing Reinforcement To Rcc Works Including Bending, Binding, Cutting, Straitening And Placing In Position Complete. 3970 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3971 Polygonal R.R. Masonary With Quary Stone Hard Laid In Dry. 3972 R.R. Masonary With Quary Stone Laid In 1:6 Cm. 3973 Providing And Laying Of 50Mm Thick Dpc Band Over Stone Work In 1:2:4 Nominal Mix. 3974 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 3975 Extra Over Brickwork In Super Structure Upto Floor V Level. 3976 Providing And Fixing Of Wooden Chowkat In Kail Wood. 3977 Providing And Fixing Of 35Mm Thick Glazed Shutters For Doors And Windows Of Kail Wood. 3978 Providing And Fixing Panelled Or Panelled Andglazed Shutters For Doors And Windows 35Mm Thick Of Kail Wood. 3979 Providing And Fixing Of Panelling Or Penelling And Glazing In Panelled Or Panelledand Glazed Shutters For Doors And Windows ; Penelling 25Mm To 40Mm Thick Of Kail Wood. 3980 Providing And Fixing Of 35Mm Thick Wire Guage Shutters For Doors And Windows Of Kail Wood. 3981 Providing 50Mm Thick Cement Concrete Flooring With Floating Coat Of Neat Cement. 3982 Providing And Fixing 1St Quality Ceramic Glazed Tiles With Minimum Thickness 5Mm Of Approved Make Like Kajaria, Somany Etc. Over 12Mm Thick Cement Mortar In 1:3 Mix. 3983 Providing And Laying / Fixing Ceramic Glazed Floor Tiles 300X300mm Of 1St Class Of Somany Or Kajaria Or Equilent Made Laid On 20Mm Thick Bed Of Lcement Mortar In 1:4 Mix. 3984 Providing And Fixing Water Closet Squarting Pan ( Indian Type With 100Mm Sand Cast Iron P Or S Trap, 10 Lit, Low Level Pvc Flusingcistern Including Flushing Pipe And Making Good The Walls And Floors Wherever Required ( Orrisa Pattern With Intergral Foot Type ) . 3985 Providing And Fixing Salem Stainless Steel Kitched Sink. Size 610X510x200mm 3986 Providing And Fixing Of Pvc Waste Pipe For Sink Including Pvc Waste Fitting Complete ( Felexible 40Mm Dia = 01 No. 3987 Providing And Fixing Of Corrogated G.S. Sheets Including Vertical / Curved Surfaces With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3988 Providing, Hoisting And Fixing Trusses Purlins Rafters, Joists Etc In Ist Class Budloo Wood 3989 Providing Ridge Or Hip Of Width 60Cm Over All With Plain G.S. Sheets Fixed With Polymer Coated J Or L Hooks ( 0.50Mm Thick ) . 3990 Providing And Fixing Of M.S Evesboarding300mm Wide And Soffit Boarding Including Priming Coat Of Red Oxide And Painting With Two Or More Coats With Synthetic Paint Of Approved Brand And Manufacture Complete Job. 3991 Providing And Applying White Cement Based Putty Of Approved Thickness 1Mm Of Approved Brand And Manufacture Over The Plastered Surfaces To Prepare The Surface Smooth And Even Complate. 3992 Distempering With 1St Quality Acrylic Distemper Of Approvedbrand And Manufacture Including Applyingadditional Coats Where Ever Required To Achive Even Shade. ( Two Coats ) 3993 Finishing Walls With Water Proofing Cement Paint Of Required Shade ( External ) ( Snowsum ) 3994 Add Provision For Plumbing, Sanitary, Grills And Electricfication To The Quarter ( Lumpsum To Be Paid Actual ) . 3995 Provision Of Handles, Tower Bolts Etc For Doors, Windows 3996 Provision For Installation Of All Types Of Sanitary Tile Work In Bath Room Incl Providing And Fixing Water Closset Suitting Parts For Bathroom With 10Ltr Low Level Flushing Cistern And Stainless Steel Kitchen Sink 3997 Providing And Fitting Of Triple Layer Water Storage Tank Of 1000 Ltr Capacity Of Approved Brand And Manufacture 3998 P / F Of Electrical Fittings Complete Job 3999 Laying & Fittingof G.I Pipes .15 Mm G.I Pipe 4000 Carriage Of Material From Source To Dumping Site At Road By Mechanical Transport.A ) Cement / Steel ( 8 Km ) 4001 B ) Sand ( 2 Km ) 4002 C ) 20 Mm Aggregate ( 25 Km ) ` 4003 D ) 40 Mm Aggregate ( 25 Km ) 4004 E ) Stone Solling ( 10 Km Average ) 4005 F ) Quarry Stone ( 10 Km Average ) 4006 L ) Bricks ( Average 10 Km ) 4007 34. ( Part A ) Wss Hadipora Pirpora ( Regional Watnard ) ( Adv. Cost Rs. 48, 87, 555 / - ) 4008 Supply, Installation, Testing & Commissioning Of Submersible Pumping Unitas Per Is 8034For With Following Specification Are As Under :Pump : Discharge Range = 3000-5000 Gphhead Range= 140- 150 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump =Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 17.50 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 4 Of Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 4009 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 80Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 4010 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 80Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 4011 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 4012 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 4013 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4014 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation, Footings, Bases For Columns 4015 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 4016 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 80Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 4017 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn 80Pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 4018 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 80 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 4019 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 4020 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 80Rest Of Specification / Details Areas Per Clause 15 Of Sbd 4021 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 80 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 4022 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 4023 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 4024 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 4025 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 4026 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 63 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 4027 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 4028 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 4029 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 4030 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 4031 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 4032 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 4033 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 4034 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 4035 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 4036 Providing And Fitting Of Pg Clamps 4037 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 4038 Painting Of Poles Red Oxide 4039 Painting Of Poles Aluminum Paint 4040 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 4041 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 4042 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 4043 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 4044 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 63 Kvarest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 4045 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 4046 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G20 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( D ) Ofsbd 4047 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 4048 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 50 Sqmm, 3.5Core, Ltcable 4049 Ii ) 10 Sqmm, 2 Core, Ltcable 4050 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 16 Sq.Mm 4051 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 4052 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 4053 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 4054 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 4055 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 4056 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 4057 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 4058 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 4059 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 4060 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen Rest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 4061 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 4062 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 4063 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 4064 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 4065 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 4066 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 4067 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 4068 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 4069 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 4070 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 40 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 4071 Providing And Fitting Of L.T35 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 4072 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 4073 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 4074 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 4075 ( Part B ) Pump House Of Wss Hadipora Pirpora ( Regional Watnard ) ( Adv. Cost Rs. 20, 01, 750 / - ) 4076 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 4077 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4078 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 4079 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 4080 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 4081 Brick Work With Commonly Brunt Clay F.P.S Bricks Of Class Designation 75 In Foundation And Plinth In 1:6 Cm. 4082 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 4083 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns Etc. For Mass Concrete. 4084 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 4085 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 4086 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 4087 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Fine Sand ) 4088 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 4089 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 4090 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 4091 Providing And Fixing Plained Eaves Boarding. 2Nd Class Kail Wood250x32 Mm ( Nominal Size ) 4092 Providing Foiisting And Fixing Truesses , Purlins , Raftrs , Posts Including Cost Of Sicrrews Etc 4093 Providing And Fixing Of 20 Mm Thick , 600 Mm Wide Sofit Of Firwood Specification Including Jam Work 4094 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 4095 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 4096 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 4097 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 4098 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 4099 Applying Priming Coat:With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 4100 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work 4101 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 4102 Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives.New Work ( Two Or More Coats Applied @ 1.43 Litre / 10 Sqm. Over & Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm. 4103 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 4104 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 4105 Fabrication Providing / Fixing Ms Ladder Wherever Is Required Comprising Of 50X50x6mm Angle Iron With Chequered Plate Complete Job. 4106 Filling Available Excavtedearth ( Excld. Rock ) In Trenches Plinth Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth Consolidating Each Deposited Layer By Ramming & Watering Lead Upto 50 M, & Lift Upto 1.5 M. 4107 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 4108 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 4109 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 4110 Providing And Fixing Of Pvc / Cp Sanitary Fittings Incl 50Ltrs Gyser ( 1No ) And 1000 Ltrs Pvc Tankwhatever Is Required At Site ( Complete Job ) 4111 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 4112 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 4113 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 4114 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 4115 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 50Kms ) 4116 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 50 Kms ) 4117 Stone Aggregate 40 Mm Nominal Size And Above ( 50 Kms ) 4118 Stone Soling ( 50 Kms ) 4119 Bricks ( 45 Kms ) 4120 Extra Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 4121 Steel ( 400 M ) 4122 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 4123 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 4124 Stone Soling ( 400 M ) 4125 Bricks ( 400 M ) 4126 35. ( Part A ) Wss Larnoo Gujjar Basti ( Adv. Cost Rs. 44, 26, 523 / - ) 4127 Supply, Installation, Testing & Commissioning Ofbore Well Submersible Pump Unitas Peris 8034 With Followingspecification As Under :Pump : Rated Dischage = 2000Gphrated Head = 204 Mtrsefficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Bore Well Submersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 15Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 1 Of Sbd 4128 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: 50Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 4129 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-C Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: 50Class:C ( Heavy ) Rest Of Specification As Per Clause 8 Of Sbd 4130 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 4131 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 4132 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materialin All Kinds Of Soil 4133 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4134 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 4135 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 4136 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: 50Class:C ( Heavy ) Rest Of Specification / Details Areas Per Clause 09 Of Sbd 4137 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn 50Pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 4138 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 50Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 4139 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 4140 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 50Class: Crest Of Specification / Details Areas Per Clause 15 Of Sbd 4141 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 50Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 4142 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 4143 Fabrication Of Gravel Hooper For Proper Feeding Of Gravels To The Borewell Andplatform To Bear The Load Of Pumping Unit, Column Pipes Etc Rest Of Specification / Details Areas Per Clause 22 Of Sbdi. In Stringers , Treads , Landings Etc Of Stair Cases Including Use Of Chequered Plate Wherever Required , All Complete 4144 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 4145 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 4146 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 25 Kva Ht Transformer, 3 Phase ( Level 2 ) . Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 4147 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 4148 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 4149 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 4150 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 4151 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 4152 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 4153 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 4154 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 4155 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 4156 Providing And Fitting Of Pg Clamps 4157 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 4158 Painting Of Poles Red Oxide 4159 Painting Of Poles Aluminum Paint 4160 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 4161 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 4162 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 4163 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 4164 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 25 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 4165 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 4166 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G20 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( D ) Ofsbd 4167 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::30 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 4168 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 35 Sqmm, 3.5Core, Ltcable 4169 Ii ) 10 Sqmm, 2 Core, Ltcable 4170 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 4171 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 4172 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 4173 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 4174 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 4175 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 4176 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 4177 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 4178 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 4179 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 4180 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmenrest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 4181 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 4182 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 4183 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 4184 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 4185 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 4186 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 4187 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 4188 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 4189 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 4190 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 25 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 4191 Providing And Fitting Of L.T25 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 4192 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 4193 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 4194 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 4195 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 4196 Carriage Of Soling Stone By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) 4197 Carriage Of Cement / Steel / Cgi Sheet / Gi Pipes Below 100Mm Dia And Other Heavy Materials By Mechanicaltransportincluding Loading , Unloadingand Stacking ( Average Distance -25Km ) 4198 ( Part B ) Pump House Of Wss Larnoo Gujjar Basti ( Adv. Cost Rs. 20, 01, 750 / - ) 4199 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 4200 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4201 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 4202 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 4203 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing & Reinforcement All Work Up To Plinth Level ( 1:1.5:3 ) 1 Cement, 1.5 Course Sand, 3 Graded Stone Aggregate 20 Mm Nominal Size ) 4204 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 4205 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 4206 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns Etc. For Mass Concrete. 4207 Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 4208 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 4209 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 4210 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Fine Sand ) 4211 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete.50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 4212 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 4213 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 4214 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood250x32 Mm ( Nominal Size ) 4215 Providing Foiisting And Fixing Truesses , Purlins , Raftrs , Posts Including Cost Of Sicrrews Etc 4216 Providing And Fixing Of 20 Mm Thick , 600 Mm Wide Sofit Of Firwood Specification Including Jam Work 4217 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 4218 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 4219 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 4220 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 4221 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Confirming To Is:4454 Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover 4222 Applying Priming Coat:With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 4223 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work 4224 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 4225 Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives.New Work ( Two Or More Coats Applied @ 1.43 Litre / 10 Sqm. Over & Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm. 4226 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 4227 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 4228 Fabrication Providing / Fixing Ms Ladder Wherever Is Required Comprising Of 50X50x6mm Angle Iron With Chequered Plate Complete Job. 4229 Filling Available Excavtedearth ( Excld. Rock ) In Trenches Plinth Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth Consolidating Each Deposited Layer By Ramming & Watering Lead Upto 50 M, & Lift Upto 1.5 M. 4230 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 4231 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 4232 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 4233 Providing And Fixing Of Pvc / Cp Sanitary Fittings Incl 50Ltrs Gyser ( 1No ) And 1000 Ltrs Pvc Tankwhatever Is Required At Site ( Complete Job ) 4234 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 4235 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 4236 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 4237 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 4238 Carriage By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 50Kms ) 4239 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 50 Kms ) 4240 Stone Aggregate 40 Mm Nominal Size And Above ( 50 Kms ) 4241 Stone Soling ( 50 Kms ) 4242 Bricks ( 45 Kms ) 4243 Extra Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 400 M ) 4244 Steel ( 400 M ) 4245 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 400 M ) 4246 Stone Aggregate 40 Mm Nominal Size And Above ( 400 M ) 4247 Stone Soling ( 400 M ) 4248 Bricks ( 500 M ) 4249 36. ( Part A ) Wss Molvi Mohallah Badwan ( Adv. Cost Rs. 32, 64, 635 / - ) 4250 Supply, Installation, Testing & Commissioning Of Openwellsubmersible Pumping Unitas Per Is 14220For With Following Specification Are As Under :Pump :Discharge Range = 2000- 4000 Gphhead Range= 105-125 Mtrs Efficiency = Not Less Than 50% Speed= 2900 Rpmtype Of Pump = Open Wellsubmersible Pumptype Of Fluid To Be Handled=Clear Watermotor:-Motor Rating= 10.00 Hp / As Per Oemmethod Ofstarting = Star – Deltaspeed = 3000 ( Sync ) .Frequency= 50 ± 3 % Hz Working Voltage= 380-415 ± 15% V, 03 Phaseefficiency = Not Less Than 90%Class Of Insulation=F / Suitable For Above Parameters Rest Of Specification / Details Are As Per Clause 4 Of Sbdnote. Since The Source Has Not Been Identifiedas Yet , As Such The Above Parametres Have Been Assumed And May Vary At The Time Of Execution Of Works Depending Upon The Actual Well Parametres Obtained After Identification Of Source. 4251 Fabrication, Providing, Fitting And Lowering Ofcolumn Pipe Conforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well Up To The Desired Depth ; The Job Includes Providing And Welding Of Flanges Conforming Tois: 6392, Table-17 And Pn 16 Size: Dn 65Class: B ( Medium ) Rest Of Specification / Details Areas Per Clause 7 Of Sbd 4252 Providing / Supplying And Fitting Ofg.I Flanged Rising Main At Site. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) . Size: Dn 65Class: B ( Medium ) Rest Of Specification As Per Clause 8 Of Sbd 4253 Earth Work In Excavation By Manual Means In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 4254 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc.In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Upto 50 M And Lift Upto 1.5M. 4255 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4256 Centering And Shuttering Including Strutting , Propping Etc. And Removal Of Form Work For Foundation , Footings , Bases For Columns 4257 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering . All Work Upto Plinth Level With 1 : 2 : 4 Mix ( 1 Cement , 2 Coarse Sand , 4 Graded Stone Aggregate 20Mm Nominal Size ) 4258 Fabrication, Providing And Fitting Of Washout Tee With Arm Length 1.2 Feet Each. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 65Class: C Heavy Rest Of Specification / Details Areas Per Clause 09 Of Sbd 4259 Providing And Fitting Of, Ductile Iron Double Flanged, Non-Rising Spindle Soft Seatedglandless Gate / Sluice Valves As Per Is14846 For Regulating The Water Supply Outside The Pumping Units .Size: Dn65pn:1.6 / 16 Rest Of Specification / Details Areas Per Clause 12 Of Sbd 4260 Providing And Fitting Ofductile Iron Double Flanged, Slanted Seatswing Check Valve ( Nrv ) As Per Is 5312. Size: 65 Mmpn: 1.6 / 16 Rest Of Specification / Details Areas Per Clause 13 Of Sbd 4261 Providing, Fitting, Testing And Commissioning Of Arv ( Air Release Valve ) As Per Is 14845 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Areas Per Clause 14 Of Sbd 4262 Fabrication , Providing And Fitting Of90-120 Degree Bend / Elbowto Be Fabricated Out Ofg.I Pipe, 1 M Lengthand Flanged On Both Ends Ato Make It Leak Proof. The Flanges Shall Be M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) And Welded On Both Sides. The Job Includes Nuts, Bolts, Gaskets Etc As Per Site Requirement.Size:Dn 65Rest Of Specification / Details Areas Per Clause 15 Of Sbd 4263 Fabrication, Providing And Fitting Of Split Type Ms Clamps10 Mm Thick, 2 Ft Long And 3 Inch Wide For Lowering And Holding Of Pumping Unit Fitted. The Job Includes The Cost Of Required Size Of Nuts And Bolts. Size: 65 Mm Rest Of Specification / Details Areas Per Clause 16 Of Sbd 4264 Fabrication Of Gantry Mechanism / Cgi Shed By Way Of Providing Structural Steel In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Steel Primer And 02 Coats Of Paint Of Approved Shade All Complete Welded. The Drawings And Dimensions For Gantry / Cgi Shedwill Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Areas Per Clause 21 Of Sbd 4265 Providing And Fitting Ofm.S 4 Inch Hinges -6 No And M.S Handle Heavy -2No., Anchor Bolts With Nuts ( M16 ) Of 0.3 M Long= 04 No. Metallic Strip ( 350Mm×50Mm×3Mm ) = 02 No.Rest Of Specification / Details Areas Per Clause 23 Of Sbd 4266 Supply, Installation And Testing Of Manual Type Triple Gear Chain Pulley Block Along With Mnrail Geared Travelling Trolley Y Of Proper Specificationscapacity =2 Tonrest Of Specification As Per Cluase 24 Of Sbd 4267 Creation Of Pole Mounted , Outdoor Type Electric Sub Stationby Way Ofs / I / T / C Of 11 / 0.433 Kva , 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Woundspecifications Conforming To Is : 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling:Onan.Rating: 25 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Apended And Rest Of Specification As Per Cluase 26 Of Sbd 4268 Providing And Fittingg.I Channel / Angle / Flat Of Sizes Including Clampsas Per Details In Clause 27 Of Sbd 4269 Supply, Installation, Testing And Commissioning Of Polymeric Gang Operated Air Break Switch, Outdoor Type, Triple Pole, Suitable For Vertical Installation, Complete As Per Is Specsrest Of Specification / Details Areas Per Clause 28 Of Sbd 4270 Supply, Installation, Testing And Commissioning Of 11Kvpolymer Fuses Sethorn Gapas Per Details In Clause 29 Of Sbd 4271 Supply, Installation, Testing And Commissioning Ofgapless Surgearrestor Station Class As Per Details In Clause 30 Of Sbd 4272 Supply And Fitting Of 11 Kv Polymeric Composite Pin Insulator As Per Details In Clause 31 Of Sbd 4273 Supply, Installation, Errection Of9 Mtrs Long H.T Pole Of Specifications St- 410 ( Sp-33 ) As Per Details In Clause 32 Ofsbd 4274 P / F Of Galvanized Nuts, Bolts Of Various Sizes As Per Site Requirement.As Per Details In Clause 33 Ofsbd 4275 P / F Danger Plate With Clamps As Per Details In Clause 34 Ofsbd 4276 Providing And Fixing G.I Barbed Wire For Anti Climbing / Anti Climbing Devices With Clamps As Per Details In Clause 35 Ofsbd 4277 Providing And Fitting Of Pg Clamps 4278 Providing And Fitting Of Galvanized Stay Set Complete As Per Details In Clause 36 Ofsbd 4279 Painting Of Poles Red Oxide 4280 Painting Of Poles Aluminum Paint 4281 Providing And Fitting Of Acsr As Per Details In Clause 39 Ofsbd 4282 Supply, Installation And Testing Of 35 Sq Mm Xlpe Aluminum H.Tcable ( Abc Type ) Of 11 Kv Grade With Following Specs.Size ( Cross Sectional Area In Sq Mm ) = 3×35 With Reinforced Wirephases:Red, Yellow, Blue 4283 Providing And Fitting Of Anchoring Clampsrequired For Holding Of 3 – Core , 35 Sq. Mm H.T Ab Cable As Per Details In Clause 40 Ofsbd 4284 P / F Of 11 Kv Cable Termination Kit As Per Details In Clause41 Ofsbd 4285 Providing And Fitting Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 25 Kva Rest Of Deatils / Technical Specification Are As Per Clause 42 Ofsbd 4286 Providing And Fitting Of Prodigy Lt Metre Of Following Specification Complete With All Fixturesrequired For Fitment At Site Type: E3l100, 3 Phase, 4 Wire Measurements Offered: Kwh, Kvarh, Kvah, Kvavoltage : 3X240v ( 415V ) , 50Hzib : 40A Imax: 200A Battery: Lithium 4287 Fabrication Providing And Fitting Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G15 And Rest Of Deatils / Technical Specification Are As Per Clause 43 ( C ) Ofsbd 4288 Providing, Fitting, Testing And Commissioning Ofmanually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Rating::25 Kva Manufacturers Test Certificate To Be Apended And Rest Of Specification As Per Clause 44 Of Sbd. 4289 Providing And Fitting Of 3 / 3.5 / 2-Core, Xlpe Armoured Aluminium Cable Conforming To Is: 7089 Part 1St As Service Line From The Ht Transformer To Control As Per Clause 46 Of Sbd. I ) 35 Sqmm, 3.5Core, Ltcable 4290 Ii ) 10 Sqmm, 2 Core, Ltcable 4291 Providing And Fitting Of 3-Core Flatsubmersible Copper Cable Conforming To Is: 694 ( Part 1St ) – 1964 & Is: 694 ( Part 2Nd ) - 1964As Per Details In Clause 47 Ofsbd Size: 10 Sq.Mm 4292 Providing And Fitting Of 25 Mm Square Single Core Copper Cable For Interconnecting Various Electrical Gadets As Per Is 694: 2010 Along With Thimbling As Per Requirement. 4293 Providing And Fitting Ofcable Tray Of Suitable Size For Carrying The Cable Inside The Machinery Room. 4294 P / I Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per Specification In Clause 48 Of Sbd 4295 Supply, Installation Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per Specification In Clause 49 Of Sbd 4296 Illumination Of Premises:Providing And Erection Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 3 Way Terminal Connector 20 Amp.2 ) 3 No Mcb 8 Amp. Rest Of Deatils / Technical Specification Are As Per Clause 50 Ofsbd 4297 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Deatils / Technical Specification Are As Per Clause 51 Of Sbd 4298 Providing And Installation Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting. Rest Of Deatils / Technical Specification Are As Per Clause 52 Of Sbd 4299 Providing, Installation And Testing Of 2Kva Fully Automatic Voltage Stabilizer Rest Of Deatils / Technical Specification Are As Per Clause 53 Of Sbd 4300 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Batteryrest Of Deatils / Technical Specification Are As Per Clause 54 Of Sbd 4301 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmenrest Of Deatils / Technical Specification Are As Per Clause 55 Of Sbd 4302 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification In Cluase 56 Of Sbd 4303 Providing Of Good Quality Conveinence And Utility Items As Per Details In Caluse57 Of Sbd 4304 Fabricationof7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bedfor Operators Withback-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site Incharge. Rest Of Deatils / Technical Specification Are As Per Clause 58 Of Sbd 4305 Providing And Fitting Of 19 Mm Thick Multilayered Ply Sheet Of Size 6 X 3 Feet , 3 Nos.Rest Of Deatils / Technical Specification Are As Per Clause 59 Of Sbd 4306 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply. 4307 Providing Of Bamboo Ladders 18 Feet Long Along With 15 Feet Long Link Rods And Ht Glove Pair ( 01 No Each ) 4308 Providing Of 1 Kw Heat Convector For Operators For Winter Season. 4309 Providing And Fitting Of 01 No. Led ( Scroll Type ) Sign Board Fabricated Out Of Stainless Steel And Metalrest Of Deatils / Technical Specification Are As Per Clause 63 Of Sbd 4310 Providing And Fitting Of 01 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipments Installed At Site Size= 7X5 Feetrest Of Deatils / Technical Specification Are As Per Clause 64 Of Sbd 4311 Providing, Installation, Testing & Commissioning Of 415 ±10%V ( Output ) , 3 Phase Diesel Generator Set As Per Is 8528 ( 2018 ) And Iso 3046 ( 2002 ) For Engine And Iec / Is 60034-1 For Alternator Suitably Assembled And Fitted In A Pollution Free Acoustic Enclosure / Canopy Of Required Size As Per Ministry Of Environment Protection Rule 1986 Read With Latest Amendments.Rating: 25 Kva , Air Cooledmanufacturers Certifice To Be Apended And Rest Of Specification As Per Cluase 66 Of Sbd 4312 Providing And Fitting Of L.T25 Sq. Mm , 1Core , Capable To Work Upto 1.1 Kv, Xlpe Insulated , Galvanized Steel Strip Armoured Coppercableconforming To Is : 7089 ( Part -1 ) 1988 With Latest Amendmentsto Be Fitted Fromd.G Setto Modular Control Panelrest Of Deatils / Technical Specification Are As Per Clause 67 Of Sbd 4313 Providing Corrugated G.S Sheet Roofingand On The All Sides Of Dg Set Shed Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks , Bolts And Nuts Rest Of Deatils / Technical Specification Are As Per Clause 68 Of Sbd 4314 Providing, Installation, Testing & Commissioning Of Complete Switchgear Unit For Protection Of D.G Setconsisting Of 200A Mccb 3- Pole , 415 V, 50 Kv Breaking Capacityrest Of Deatils / Technical Specification Are As Per Clause 78 Of Sbd 4315 Carriage Of Sand , Stone Aggregate By Mechanical Transportincluding Loading , Unloadingand Stacking ( Average Distance-5Km ) Rest Of Deatils / Technical Specification Are As Per Clause 79 Of Sbd 4316 ( Part B ) Pump House Of Wss Molvi Mohallah Badwan ( Adv. Cost Rs. 15, 92, 635 / - ) 4317 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed ( 1 Meter From Cutting Edge ) All Kinds Of Soil 4318 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Material :All Kinds Of Soil 4319 Providing And Laying Hand Packed Stone Soling 50 Mm Nominal Size Including Filling, Spreading, Dressing, Ramming, All Leads Lifts And All Carriages Complete. 4320 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 4321 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 4322 Brick Work With Common Burnt Clay ( Non-Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 4323 Extra For Brick Work With Common Burnt Clay Bricks / Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 4324 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 4325 Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 4326 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 4327 12Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1 : 3 ( 1 Cement : 3 Fine Sand ) 4328 1 : 4 ( 1 Cement : 4 Fine Sand ) 4329 Cement Concrete Flooring 1:2:4 ( 1Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry And Curing Complete, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 50 Mm Thick With 20Mm Nominal Size Stone Aggregate. 4330 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Levelhot Rolled Deformed Bars 4331 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. ( Welded ) 4332 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 4333 Providing Ridges Or Hips Of Width 60Cm Overall Width Plain G.S. Sheets Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8Mm Dia G.I. Limpet And Bitumen Washers Complete.0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 4334 Providing And Fixing Plained Eaves Boarding.2Nd Class Kail Wood 250X32 Mm ( Nominal Size ) 4335 Providing And Fixing Of 12 Mm Thick Ply Board Soffit Along With Supporting Of First Class Popular Wooden Ballies 4336 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately ) :First Class Kail Wood 4337 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note: -Butt Hinges And Necessary Screws Shall Be Paid Separately ) .First Class Kail Wood ( 35 Mm Thick ) 4338 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.First Class Kail Wood ( 35 Mm Thick ) 4339 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :First Class Kail Wood 4340 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick.First Class Kail Wood 4341 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.1 Mm Thick 4342 P / F Of 1St Quality Ceramic Glazed Tiles Confirming To Is : 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Colour, Shades Except Bergandy, Bottle Green, Black Of Any Size As Approved By Err. Incharge In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortor 1:3 ( 1 Cement, 3 Coarse Samd ) And Jointing With Grey Cement Slurry @ 3.30 Kgs / Sm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 4343 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown 4344 Dry Random Rubble Masonry With Hard Stone In Foundation And Plinth: With Bond Stone. 4345 Pointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) Flush / Ruled Pointing 4346 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm 4347 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Flexible Pipe, 40 Mm Dia 4348 Providing And Fixing Of Pvc / Cp Sanitary Fittings Whatever Is Required At Site ( Complete Job ) 4349 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 4350 Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.84 Kg / 10Sqm ) 4351 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coats Applied @ 0.90Litre / 10Sqm Over An Under Coat Of Primer Applied @ 0.75Litre / 10Sqm Of Approved Brand And Manufacture 4352 Fixing Of Plumbing / Electrification / Iron Grill To Windows Including Cost Of Plumbing Items / C.P Fittings / Conductors / Led Bulbs / Fans / Mcb, Etc ( Complete Job ) 4353 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) Upto Plinth Level And Curing Complete With: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 4354 Providing And Laying Damp-Proof Course 50 Mm Thick With Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete 4355 Carriage Of Materials By Mechanical Transport Including Loading, Unloading And Stackingcement And Steel ( 35 Kms ) 4356 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 35 Kms ) 4357 Stone Aggregate 40 Mm Nominal Size And Above ( 35 Kms ) 4358 Stone Soling ( 45 Kms ) 4359 Bricks ( 35 Kms ) 4360 Extra Carriage By Manual Labour Including Loading, Unloading And Stackingcement ( 1200 M ) 4361 Steel ( 1200 M ) 4362 Sand, Stone Aggregate Below 40 Mm Nominal Size ( 1200 M ) 4363 Stone Aggregate 40 Mm Nominal Size And Above ( 1200 M ) 4364 Stone Soling / Stones ( 1200 M ) 4365 Bricks ( 1200 M )

INR 1000 /-

INR 5901068.0 /-

INR 29.50 Crore /-