Maintaing Of Water Supply By Replacement Of Eandm Equipments At Various Tube Wells In Baljeet Nagar Area---1 Supplyof Automation LT Panel board suitable for 415 V, 3 Phase, 50 Hz, 4 wire system for operation of up to 15 HP submersible set, made out of not, Delhi-Delhi

Maintaing Of Water Supply By Replacement Of Eandm Equipments At Various Tube Wells In Baljeet Nagar Area---1 Supplyof Automation LT Panel board suitable for 415 V, 3 Phase, 50 Hz, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 ,, for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX1360 mmX300 mm and having (1) 63 Amp changeover -1 No (2) 63 A TPN MCB -1No (3) Amp.meter 0-50 A -1 No (4) Voltmeter 1 No (5) Amp. & Volt meter selector switches 1 set (6) Auto Manual + Light+Control MCB TP 32 Amp-1 No.each (7) CT--3 Nos (8) Push button +ON/OFF light-2 Nos each (9) 5 KVAR Shunt Capacitor-1 No (10) Aluminium Bus bar size 25 mmX6mm- 1set (11) 15 HP Star Delta starter (a) 32 Amp Power Contactor-3 Nos (b) overload relay 14-23 A-1 No (C) Star Delta Timer -1 No (d) QT Timer -24 Hours -1 No (e) Motor Protection Relay flush mounting with display with thermal O/L, Short circuit,earth Fault, Phase loss, unbalance, Phase reversal, locked rotor protection Make :- L&T/Protech-1 No Make of Accessories/components as per DJB approved Make of Panels:- L&T/C&S/BCH/Protech/DJB Approved 2 Supply-Of G.I. Pipe 40mm dia, Medium-class, each of 3m±3Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange ofthickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.HSN CODE:- 7308 3 Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 4.0 sq mm. size in 100mtr. Roll.Make: Finolex / HavellsHSN CODE:-8544 4 Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 40 mm dia.Make of Pipe:Jindal / TATA.HSN CODE:- 7307 5 Supply-Of G.I. Bend 90o x 40 mm dia, having Flange at both-ends.HSN CODE:- 7307 6 Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality.HSN CODE:-7318 7 Supply-Of Rubber-packing for 40mm dia Flange. HSN CODE:-4008 8 Supply-Of Orifice-Assembly 40mm dia, 0.6 Meter Long, Double-Flange. HSN CODE:- 7307 9 Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 40 mm dia in center with Locking arrangement by Nuts & Bolts. HSN CODE:- 7307 10 Lifting & lowering of submersible pumpsets along with all allied Electrical and Mechanical accessories from the tube-wells including dismantling of column pipes by opening/cutting of nut & bolts, opening & re-jointing of cables, testing & commissioning of t/wells as per site requirement up to depth of bore approx to 350 ft, job include the hiring of T&P like chain pulley block, tripod stand, tool & tackle, hiring of TATA-407 or equivalent suitable vehicle for local shifting of material from store to site or vice-versa etc. as per site requirement to complete the job.

INR 500 /-

INR 11400.0 /-

Refer document