|
| 1 | Mechanical transportation, loading, unloading and stacking of various items / machinery equipment using appropriate means of transport as under: |
| 2 | Private car, auto-rickshaw or similar with 1.0 km lead |
| 3 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 4 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 5 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 6 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 7 | Extra per kilometer for lead >30.0 kms upto 50 Km |
| 8 | Load carrier auto, mini van or similar with 1.0 km lead |
| 9 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 10 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 11 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 12 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 13 | Extra per kilometer for lead >30.0 kms upto 50 Km |
| 14 | Mini truck like Tata mobile, Bolero Camper or similar with 1.0 km lead |
| 15 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 16 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 17 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 18 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 19 | Extra per kilometer for lead >30.0 kms upto 50 Km |
| 20 | Truck, tipper or similar with 1.0 km lead |
| 21 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 22 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 23 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 24 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 25 | Extra per kilometer for lead >30.0 kms upto 50 Km |
| 26 | Hiring of mobile crane up to 5 Ton capacity |
| 27 | Hiring of hydraulic back hoe loader. |
| 28 | MOTORS |
| 29 | DISMANTLING AND ASSEMBLING |
| 30 | Disconnecting of all motor leads, dismantling of motor, draining off the m.oil (if applicable) and collection in suitable pan, carefully taking out the rotor from the stator, and completely disassembly as per requirement of job: |
| 31 | Up to 10 HP |
| 32 | >10 HP –60 HP |
| 33 | >60 HP – 200 HP |
| 34 | > 200 HP -350 HP |
| 35 | > 350 HP |
| 36 | Complete assembling of all motor parts, refilling of drained out M. Oil (if applicable), coupling and alignment with pump, reconnecting of leads and testing on full load. |
| 37 | Up to 10 HP |
| 38 | >10 HP –60 HP |
| 39 | >60 HP – 200 HP |
| 40 | > 200 HP -350 HP |
| 41 | > 350 HP |
| 42 | Repairs to Non Reverse Ratchet on Driving End (DE) of Vertical electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling and dismounting of motor from the motor stool. Removal of non-reverse ratchet plate/ seal plate/ ratchet pins, etc as per requirement and refitting after necessary repairs/ replacements. Refitting of motor, coupling and alignment with the pump. The job includes testing of motor on load. |
| 43 | Replacement of Non Reverse Ratchet on Non Driving End (NDE) of Vertical electric motor by way of: Isolating the motor, dismantling of top end cover of the motor, removing of non-reverse ratchet plate/ seal plate/ ratchet pins, etc as per requirement and refitting back of parts after necessary repairs/ replacements and testing of motor on load. |
| 44 | Replacement of Driving End (DE) bearing of Vertical electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor from the motor stool. Opening the bottom end cover of DE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of motor parts, coupling and alignment with the pump. The job excludes the cost of bearing |
| 45 | Up to 60 HP |
| 46 | >60 HP – 200 HP |
| 47 | > 200 HP -350 HP |
| 48 | > 350 HP |
| 49 | Replacement of Non Driving End (NDE) bearing of Vertical electric motor by way of: Disconnecting all leads from motor and marking of terminals, dismantling of top end cover of the motor & removal of nonreverse ratchet assembly. Draining off the m.oil and collection in a suitable pan (if applicable), extraction of old damaged bearing from the motor, fitting of new NDE bearing and refilling of old m.oil. The job includes load testing of motor. |
| 50 | Up to 60 HP |
| 51 | >60 HP – 200 HP |
| 52 | > 200 HP -350 HP |
| 53 | > 350 HP |
| 54 | Replacement of Driving End (DE) bearing of horizontal electric motor by way of: Disconnecting all leads from motor and marking the terminals, uncoupling of motor from the pump. Opening the end cover of DE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of motor parts, coupling and alignment with the pump. The job includes testing of motor on load. |
| 55 | Up to 60 HP |
| 56 | >60 HP – 200 HP |
| 57 | > 200 HP -350 HP |
| 58 | > 350 HP |
| 59 | Replacement of connection plate to motor after dismantling of damaged one |
| 60 | Up to 60 HP |
| 61 | >60 HP – 200 HP |
| 62 | > 200 HP -350 HP |
| 63 | > 350 HP |
| 64 | Complete rewinding of submersiblemotors of different ratings in PVC insulated copper wire of proper pitch, grade, gauge and number of turns as per sample after complete removal of burnt out winding, cleaning of slots, etc.. The job includes all the charges on account of , sleeves, bamboo sticks and skilled labour (Rewinding charges), testing of motor on full load at site. |
| 65 | BEARINGS FOR MOTORS |
| 66 | Providing of new bearing as under: (Prefered makes: SKF or equivalent imported make ). |
| 67 | 3210 bearing |
| 68 | 3212 bearing |
| 69 | 3213 bearing |
| 70 | 3309 bearing |
| 71 | 3313 bearing |
| 72 | 51310 bearing |
| 73 | 51312 bearing |
| 74 | 51314 bearing |
| 75 | 51320 bearing |
| 76 | 6014 bearing |
| 77 | 6028 bearing |
| 78 | 6217 bearing |
| 79 | 6220 bearing |
| 80 | 6305 bearing |
| 81 | 6306bearing |
| 82 | 6307bearing |
| 83 | 6308bearing |
| 84 | 6309 bearing |
| 85 | 6310bearing |
| 86 | 6311 bearing |
| 87 | 6312 bearing |
| 88 | 6313 bearing |
| 89 | 6314bearing |
| 90 | 6315 bearing |
| 91 | 6316 bearing |
| 92 | 6318 bearing |
| 93 | 6320 bearing |
| 94 | 6322 bearing |
| 95 | 6406 bearing |
| 96 | 6408 bearing |
| 97 | 6410 bearing |
| 98 | 6411bearing |
| 99 | 6412 bearing |
| 100 | 6415 bearing |
| 101 | 6418 bearing |
| 102 | 6320bearing |
| 103 | 7220 bearing |
| 104 | 7312 bearing |
| 105 | 7318bearing |
| 106 | N317bearing |
| 107 | NU316 bearing |
| 108 | NU318 bearing |
| 109 | NU322 bearing |
| 110 | NU324 bearing |
| 111 | 29322bearing |
| 112 | 29324bearing |
| 113 | 29328 bearing |
| 114 | 29330 bearing |
| 115 | 29424bearing |
| 116 | 29426bearing |
| 117 | VOLTAGE STABILIZERS |
| 118 | Dismantling of 415V 3-ph Voltage Stabilizer by way of opening of top lid, disassembling of voltage regulator, removing of all incoming and outgoing connections, taking out of damaged copper legs after removal of core, etc. The job includes draining out of T. Oil and its safe placement for further refilling. |
| 119 | Up to 50 KVA |
| 120 | >50 KVA - 100 KVA |
| 121 | >100 KVA – 250 KVA |
| 122 | >250 KVA – 400 KVA |
| 123 | >400 KVA |
| 124 | Assembling of all parts of 3-phase Voltage Stabilizer, connecting of leads of all incoming and outgoing connections and refilling of old drained out of T. Oil |
| 125 | Up to 50 KVA |
| 126 | >50 KVA - 100 KVA |
| 127 | >100 KVA – 250 KVA |
| 128 | >250 KVA – 400 KVA |
| 129 | >400 KVA |
| 130 | Rewinding of burnt / damaged windings of different rating voltage stabilizer, Horizontal, Vertical Motors , Auto Transformer starters , coil assembly using superior quality wire of proper gauge as per requirement with superior insulation. The job includes all the charges on account of, tapping, sleeves, varnishing, and skilled labour (Rewinding charges), testing of stabilizer on full load at site. |
| 131 | Copper wire |
| 132 | Copper strip |
| 133 | Aluminium wire |
| 134 | Aluminium strip |
| 135 | Replacement of copper contact point on regulator plate complete job |
| 136 | Providing and complete replacement of tap changer rotary switch/ regulator (double plate) of voltage stabilizer of nominal size: |
| 137 | 9 sq. inch |
| 138 | 12 sq. inch |
| 139 | 16 sq. inch |
| 140 | 18 sq. inch |
| 141 | Providing and Fitting of brass bush rod complete with nuts and washers as under: |
| 142 | 12mm |
| 143 | 26mm |
| 144 | 29mm |
| 145 | 25mm |
| 146 | CONSUMABLES |
| 147 | Providing of fresh transformer oil conforming to IS 335 (Preferred make: Indian Oil Servo/ HPCL) |
| 148 | Providing of used and filtered transformer oil for LV electrical appliances |
| 149 | Providing of AP3 Grease (all purpose type)(Preferred makes: HPCL/ Indian oil/ BPCL/ Castrol/ Caltex) |
| 150 | STARTERS |
| 151 | Providing, installation, testing and commissioning of dry type 10HP (L&T/Bentex/Kilburn make). DOL Starters, mechanically operated, working on 50Hz, 450±10% AC voltage supply for operation of priming units. The starter shall be mounted with nuts and bolts for proper fixing on pannel. |
| 152 | Repairs to upto 200 HP OISD Starter by way of complete dismantling of the starter & then replacement of; and then testing on full load |
| 153 | Replacement of Long/fixed contact point as per sample |
| 154 | Replacement of Short/movable contact point as per sample |
| 155 | Replacement of damaged trip coil contact point as per sample |
| 156 | Replacement of copper bush rod as per sample |
| 157 | Setting right of handle mechanism & Retaping/ thimbling of the terminal connections |
| 158 | Rewinding burnt/ damaged limb/s of autotransformer coil assembly (comprising of three limbs) of all rating ATSusing superior quality copper wire of proper gauge as per requirement with superior insulation, varnish, etc. (Note: The unserviceable scrap copper generated shall be property of the firm and is taken into account for estimation of rates). |
| 159 | CONTACTORS |
| 160 | Providing and fitting of 3-pole contactor with specified coil voltage: |
| 161 | ML – 1.5 |
| 162 | ML – 2 |
| 163 | ML – 3 |
| 164 | ML – 4 |
| 165 | ML – 6 |
| 166 | ML – 10 |
| 167 | ML – 12 |
| 168 | MNX 50 |
| 169 | MNX 70 |
| 170 | MNX 80 |
| 171 | MNX 95 |
| 172 | MNX 110 |
| 173 | MNX 140 |
| 174 | MNX 185 |
| 175 | MNX 225 |
| 176 | MNX 250 |
| 177 | MNX 325 |
| 178 | MNX 400 |
| 179 | MNX 550 |
| 180 | MNX 650 |
| 181 | Schneider Electric LC1F265 (without coil) |
| 182 | Schneider Electric LC1F330 (without coil) |
| 183 | Schneider Electric LC1F400 (without coil) |
| 184 | Schneider Electric LC1F630 (without coil) |
| 185 | 32A AC-3 rating (Siemens 3TF/ L&T Type MO/ Schneider) |
| 186 | 45A AC-3 rating with 2NO + 2NC auxillary contacts (Siemens 3TF/ L&T Type MO/ Schneider) |
| 187 | Providing and fitting of new Contact kit set for contactors |
| 188 | 9A to 45A AC-3 rating (Siemens 3TF/ equivalent) |
| 189 | L&T ML 2/ 3 |
| 190 | L&T ML 4/ 6 |
| 191 | L&T ML 10/ 12 |
| 192 | L&T MNX 50/ 70/ 80 |
| 193 | L&T MNX 95/ 110/ 140 |
| 194 | L&T MNX 185/ 225/ 250 |
| 195 | L&T MNX 300/ 400 |
| 196 | L&T MNX 550/ 650 |
| 197 | Schneider Electric LC1F185/ LC1F225 |
| 198 | Schneider Electric LC1F265/ LC1F330 |
| 199 | Schneider Electric LC1F400 |
| 200 | Schneider Electric LC1F630 |
| 201 | Providing and fitting of new Contact kit set for contactors |
| 202 | 32A AC-3 rating (Siemens 3TF/equivalent) |
| 203 | L&T ML 2 |
| 204 | L&T ML 3 |
| 205 | L&T ML 4 |
| 206 | L&T ML 6 |
| 207 | L&T ML 10 |
| 208 | L&T ML 12 |
| 209 | Providing and fitting of auxillary/ control relay (L&T MX0 or similar) for ACcontrol |
| 210 | Providing and fitting of auxillary/ control relay (L&T MN0 or similar) for DCcontrol |
| 211 | Providing and fitting of (1NO+1NC) side mounting auxillary contact block (For L&T/ Schneider Electric make contactors). |
| 212 | Providing and fitting of front mounting auxillary contact block having 04 contacts (all combinations) (For L&T/ Schneider Electric/ Siemens make contactors) |
| 213 | TIMING RELAYS |
| 214 | Providing, fitting and setting of electropneumatic timing relay with timing range upto 60s; coil voltage 415V AC (BCH or equivalent make) . |
| 215 | (2NO + 2NC) double block; ON delay |
| 216 | (2NO + 2NC) double block; ON & OFF delay |
| 217 | Providing and fitting of spares for electropneumatic timing relay (BCH make orequivalent) |
| 218 | (2NO + 2NC) contact block |
| 219 | Magnetic coil 415V AC |
| 220 | Magnet frame assembly without coil |
| 221 | Providing, fitting and setting of DIN mounted electronic Timer (L&T or equivalent make) |
| 222 | Star Delta (range from 3s - 120s) 240V AC |
| 223 | Star Delta (range from 3s - 30s) 240 - 415V AC |
| 224 | ON delay (0.3s - 30hrs) 240V AC |
| 225 | Providing, fitting and setting up of single range auto reset synchronous ON delay timer (L&T or equivalent make) |
| 226 | THERMAL OVERLOAD RELAY |
| 227 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T MN2) |
| 228 | Relay range in between 0.2A to 15A |
| 229 | 14-23A |
| 230 | 20-33A |
| 231 | 24-40A |
| 232 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T MN5) |
| 233 | 30-50A |
| 234 | 36-60A |
| 235 | 45-75A |
| 236 | 66-110A |
| 237 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T ML1) |
| 238 | Relay range in between 0.15A to 16A |
| 239 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T ML2/3) |
| 240 | Relay ranges in between 9A to 42A |
| 241 | SWITCHGEAR |
| 242 | MCCB |
| 243 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 36 kA breaking capacity (Ics= 100% Icu) (Make: L&T/Schneider or equivalent) having max. of thermal release range as under: |
| 244 | 100A |
| 245 | 125A |
| 246 | 160A |
| 247 | 200A |
| 248 | 250A |
| 249 | 320A |
| 250 | 400A |
| 251 | 500 A |
| 252 | 630A |
| 253 | 800A |
| 254 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 50 kA breaking capacity (Ics= 100% Icu) (Make: L&T/Schneider or equivalent) having max. of thermal release range as under: |
| 255 | 125A |
| 256 | 160A |
| 257 | 200A |
| 258 | 250A |
| 259 | 320A |
| 260 | 400A |
| 261 | 500 A |
| 262 | 630A |
| 263 | 800A |
| 264 | Providing and fitting of 4-pole 415V MCCB with adjustable thermal and fixed magnetic setting having 36KA breaking capacity Ics = 100% Icu (Make: L&T d-sine or equivalent) Having max. of thermal release range as under: |
| 265 | 160A |
| 266 | 200A |
| 267 | 250A |
| 268 | 320A |
| 269 | 400A |
| 270 | 500 A |
| 271 | 630A |
| 272 | 800A |
| 273 | Providing and fitting of 4-pole 415V MCCB with adjustable thermal and fixed magnetic setting having 50KA breaking capacity Ics = 100% Icu (Make: L&T d-sine or equivalent) Having max. of thermal release range as under: |
| 274 | 160A |
| 275 | 200A |
| 276 | 250A |
| 277 | 320A |
| 278 | 400A |
| 279 | 500 A |
| 280 | 630A |
| 281 | 800A |
| 282 | SPARES FOR ACB (L&T C-POWER) |
| 283 | Providing and fitting of pole assembly for draw out type ACB (L&T C-power) |
| 284 | upto 1250A |
| 285 | 2000A |
| 286 | Providing and fitting of Arc Chute (440V) for ACB (L&T C-power) |
| 287 | upto 1250A |
| 288 | 1600 - 2000A |
| 289 | Providing and fitting of Jaw contact for ACB (L&T C-power) |
| 290 | 630-1000A |
| 291 | 1250A |
| 292 | 1600A/ 2000A |
| 293 | Providing and fitting of Fixed arcing contact for ACB (L&T C-power) |
| 294 | 800- 1600A |
| 295 | 2000A |
| 296 | Providing and fitting of Moving arcing contact for ACB (L&T C-power) |
| 297 | 800- 2000A |
| 298 | Providing and fitting of Shunt release for ACB (L&T C-power) |
| 299 | Providing and fitting of Under Voltage Release for ACB (L&T C-power) |
| 300 | Providing and fitting of Earth Fault Release for ACB (L&T C-power) |
| 301 | Providing and fitting of Terminal Adaptor for Draw out L&T C-POWER ACB of ratings as under: |
| 302 | upto 800 - 1250A |
| 303 | 1600 - 2000A |
| 304 | Providing and fitting of thermal-Magnetic Release (type DN1) for L&T C-power ACB |
| 305 | Providing and fitting of CT for DN1 type L&T C-power ACB |
| 306 | 800/ 1000A |
| 307 | 1250/ 1600A |
| 308 | 2000A |
| 309 | Providing and fitting of main spring for 3-pole ACB (L&T C-power) |
| 310 | 800- 1600A |
| 311 | 2000A |
| 312 | Providing of racking handle for draw-out type ACBs (L&T C-power) rating upto 2000A |
| 313 | Providing and replacement of spring charging motor (AC/ DC) |
| 314 | Providing and replacement of motor limit switch |
| 315 | Providing and fitting of 96x96 flush mounting 3-phase LED ammeter/voltmeter of Class 1 accuracy (Make: L&T/ Schneider/ Rishabh/ AE) |
| 316 | Providing and fitting of flush type analog moving iron AC meter as under: (Make: Rishabh/ AE/ C&S/ BCH) |
| 317 | 48x48mm 500V voltmeter |
| 318 | 96x96mm 500V voltmeter |
| 319 | 144x144mm 500V voltmeter |
| 320 | Volt-Ammeter 500V, current ranges upto 125A (AE/ Rishabh/ L&T) |
| 321 | 96x96mm ammeter (5A CT operated) |
| 322 | Providing and fitting of flush type frequency meter with range 45-55Hz:(Make: Rishabh/ AE/ L&T/ Schneider/ BCH) |
| 323 | Providing and fitting of 10A line current ammeter selector switch with OFF(Make: L&T/Rishabh/ AE/ Teknic) |
| 324 | Providing and fitting of 10A voltmeter selector switch with OFF(Make: L&T/ Rishabh/ AE/ Teknic) |
| 325 | Providing and fitting of tape insulated ring type metering current transformers (AE/ Rishabh/ Crompton/ Kilburn) as under: |
| 326 | 100/5A or 150/5A - Class 1 - Burden 5VA |
| 327 | 200/5A - Class 1 - Burden 10VA |
| 328 | 400/5A - Class 1 - Burden 15VA |
| 329 | 600/5A - Class 1 - Burden 15VA |
| 330 | 800/5A - Class 1 - Burden 15VA |
| 331 | 1000/5A - Class 1 - Burden 15VA |
| 332 | 2000/5A - Class 1 - Burden 15VA |
| 333 | Extra for 1A secondary upto 600/1A over corresponding rate |
| 334 | Providing and fitting of analog VAC hour meter(Make: L&T or equivalent make) |
| 335 | DIN mounting type |
| 336 | Flush mounting type |
| 337 | Providing and fitting of flush or projecting head push button with contact block (L&T/ Teknic/ ABB/ BCH/ Schneider or any other reputed make) |
| 338 | Providing and fitting of LED phase indicator with surge protection (L&T/Teknic/ ABB/ BCH/ Schneider or any other reputed make) |
| 339 | Providing and fitting 3 Phase, 3/4 Wire adjustable Under & Over Voltage monitoring relay (Minilec VCT D2 or equivalent) |
| 340 | Providing, fitting and setting of 415V auto reset single phase preventor (L&T/Minilec/ BCH or equivalent make) |
| 341 | 50V or less unbalance & 1 C/O DIN mounted |
| 342 | 50V or less unbalance & 1 C/O Panel wall mounted |
| 343 | 70V or less unbalance & 2 C/O DIN mounted |
| 344 | Providing and fitting of 32A DP switch(Anchor/ SSK or any other reputed make) |
| 345 | Providing of HRC fuses (2A - 32A) ratings |
| 346 | Providing and fitting of Fuse holders for fuses upto 32A rating |
| 347 | Providing and fixing uPVC panel trunking with cover |
| 348 | 15x15mm |
| 349 | 25x25mm |
| 350 | Providing and fitting of Terminal Block 100A - 3 way |
| 351 | TERMINALS/LUGS/THIMBLES |
| 352 | Providing and fitting of various aluminium lugs/Thimbles (Dowells/ Action/ or equivalent make) with tapping, insulation as under: |
| 353 | 16 sq. mm |
| 354 | 25 sq. mm |
| 355 | 35 sq. mm |
| 356 | 50 sq. mm |
| 357 | 70 sq. mm |
| 358 | 95 sq. mm |
| 359 | 120 sq. mm |
| 360 | 150 sq mm |
| 361 | 185 sq. mm |
| 362 | 240 sq. mm |
| 363 | 300 sq. mm |
| 364 | 400 sq. mm |
| 365 | 500 sq mm |
| 366 | 630 sq. mm |
| 367 | 800 sq. mm |
| 368 | Providing and fitting of various copper lugs/Thimbles (Dowells/ Action/ or equivalent make) with tapping, insulation as under: |
| 369 | 16 sq. mm |
| 370 | 25 sq. mm |
| 371 | 35 sq. mm |
| 372 | 50 sq. mm |
| 373 | 70 sq. mm |
| 374 | 95 sq. mm |
| 375 | 120 sq. mm |
| 376 | 150 sq mm |
| 377 | 185 sq. mm |
| 378 | 240 sq. mm |
| 379 | 300 sq. mm |
| 380 | 400 sq. mm |
| 381 | 630 sq. mm |
| 382 | 800 sq. mm |
| 383 | WIRES AND CABLES |
| 384 | Providing and fitting of PVC insulated 1100V single core industrial copper cable as under |
| 385 | 16 sqmm |
| 386 | 25 sqmm |
| 387 | 35 sqmm |
| 388 | 50 sqmm |
| 389 | 70 sqmm |
| 390 | 95 sqmm |
| 391 | 120 sqmm |
| 392 | 150 sqmm |
| 393 | 185 sqmm |
| 394 | 240 sqmm |
| 395 | 300 sqmm |
| 396 | 400 sqmm |
| 397 | Providing and fitting of PVC insulated 1100V single core industrial un armored aluminium cable as under |
| 398 | 16 sqmm |
| 399 | 25 sqmm |
| 400 | 35 sqmm |
| 401 | 50 sqmm |
| 402 | 70 sqmm |
| 403 | 95 sqmm |
| 404 | 120 sqmm |
| 405 | 150 sqmm |
| 406 | 185 sqmm |
| 407 | 240 sqmm |
| 408 | 300 sqmm |
| 409 | 400 sqmm |
| 410 | 500 sqmm |
| 411 | 630 sqmm |
| 412 | 800 sqmm |
| 413 | 1000 sqmm |
| 414 | Providing and fitting of XLPE 1100V 3.5-core industrial armored aluminum cable as under |
| 415 | 25 sqmm |
| 416 | 35 sqmm |
| 417 | 50 sqmm |
| 418 | 70 sqmm |
| 419 | 95 sqmm |
| 420 | 120 sqmm |
| 421 | 150 sqmm |
| 422 | 185 sqmm |
| 423 | 240 sqmm |
| 424 | 300 sqmm |
| 425 | 400 sqmm |
| 426 | 500 sqmm |
| 427 | 630 sqmm |
| 428 | Providing and fitting of PVC insulated 1100V flat 3-core industrial copper cable for submersible pump motors as under |
| 429 | 6 sqmm |
| 430 | 10 sqmm |
| 431 | 16 sqmm |
| 432 | 25 sqmm |
| 433 | 35 sqmm |
| 434 | Providing and fitting of PVC insulated 1100V copper cable for electrification: Finolex/ L&T/ Havells/ KEI) |
| 435 | 1 sqmm |
| 436 | 1.5 sqmm |
| 437 | 2.5 sqmm |
| 438 | 4 sqmm |
| 439 | 6 sqmm |
| 440 | 2 x 10 sq mm aluminium unarmored |
| 441 | 2 x 16 sq mm aluminium unarmored |
| 442 | 2 x 16 sq mm aluminium armored |
| 443 | Providing and laying of ACSR conductor on poles |
| 444 | .03 ACSR |
| 445 | .05 ACSR |
| 446 | Providing and fitting of single core 11 KV armored aluminium cable |
| 447 | 25 sq mm |
| 448 | 35 sq mm |
| 449 | 50 sq mm |
| 450 | 70 sq mm |
| 451 | Providing and fitting of 3 core 11 KV armored aluminum cable |
| 452 | 25 sq mm |
| 453 | 35 sq mm |
| 454 | 50 sq mm |
| 455 | 70 sq mm |
| 456 | 11KV HT Cables |
| 457 | 35 sq mm ABC |
| 458 | 50 sq mm ABC |
| 459 | 70 sq mm ABC |
| 460 | 35 sq mm 3 - Core |
| 461 | 50 sq mm 3 - Core |
| 462 | 70 sq mm 3 - Core |
| 463 | LIGHTING |
| 464 | Lighting points in 1.0 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. The job incl. P/F of 5/6 Amp. switch, angle / button holder, 9 - 12 W LED lampwith necessary fixtures |
| 465 | Lighting points, bulk head type in 1.0 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. The job incl. P/F of 5 /6 Amp. switch, angle / button holder, 9 -12 W LED lampwith necessary fixtures |
| 466 | Heating points in 2.5 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. The job incl. P/F of 16 Amp.SS combine |
| 467 | 5-pin socket points in 1.5 sq mm multi strandPVC insulated copper conductor to be laid / carried in PVC channel/conduit |
| 468 | Indicator pointsin 1.0 sq mm multi strandPVC insulated copper conductor to be laid / carried in PVC channel/conduit |
| 469 | Ceiling Fan make c/w regulator switch, ceiling rose, wiring in 1.5 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. and necessary fixtures |
| 470 | Providing and installation of SPN sheet steel enclosed Distribution boxes - Single door |
| 471 | 4 way |
| 472 | 8 way |
| 473 | 12 way |
| 474 | 16 way |
| 475 | Providing and installation of ‘B’ Series MCB 240V, 50Hz,10kA Suitable for lighting and other domestic loads |
| 476 | 6-32A SP |
| 477 | 40 A – SP |
| 478 | 6-32A DP |
| 479 | 40 A – DP |
| 480 | 63 A – DP |
| 481 | Providing and installation of ‘B’ Series MCB 240V, 50Hz,10kA Suitable for lighting and other domestic loads |
| 482 | Providing and installation of Busbar chamber TPN |
| 483 | HD Copper |
| 484 | EC Grade Aluminium |
| 485 | Providing, installation and testing of floodlight LED 5000/ 6000/ 6500K IP65 |
| 486 | 30 W |
| 487 | 48 W |
| 488 | 50 W |
| 489 | 100 W |
| 490 | 120 W |
| 491 | MANPOWER |
| 492 | Hiring charges of Electrician (for troubleshooting/ revamping of existing electrical fitting, etc. exclusive of specified works): |
| 493 | Hiring charges of Labourer for support of electrician |
| 494 | PORTABLE LIGHT |
| 495 | 3 W LED rechargeable torch |
| 496 | LED Lantern with Twin Charging mode – Charging Cable and Solar Panel (inclusive of panel) |
| 497 | CONDUIT |
| 498 | Providing and fixing 25mm PVC round conduit (medium) with allied PVC fittings |
| 499 | Providing and fixing Polypropylene Corrugated flexible conduit |
| 500 | 25 mm |
| 501 | 32 mm |
| 502 | Providing and Fitting of 50 mm dia flexible canvas sleeve / conduit |
| 503 | Providing and Fitting of 50 mm dia flexible rubber sleeve / conduit |
| 504 | Providing/laying of 3mm thick high density anti skid rubber floor mating on the machine floor level area |
| 505 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling shuttering etc. as required. |
| 506 | Above 4.5 meter and up to 6.5 meter |
| 507 | Above 6.5 meter and up to 8.0 meter |
| 508 | Above 8.0 meter and up to 10.0 meter |
| 509 | Above 10.0 meter and up to 12.0 meter |
| 510 | REBATE ON ACCOUNT OF OLD PARTS |
| 511 | Extracted, damaged copper wire ( during rewinding of electric gadgets ) |
| 512 | Extracted, damaged aluminium wire ( during rewinding of electric gadgets ) |
| 513 | Contact points/Brass bush rods |
| 514 | Copper bus bars |
| 515 | Aluminium bus bars |
