Supply Installation Testing Commissioning Of Submesible Pump Sets With All Allied Eandm Equipment At More Sarai, Katra Pedan Bijli Road, Kucha Seth , Dariba Kalan And Deewan Hall In Chandni Chowk Area Under Ac-20 ( Ae-Ii ) - 1 Supply Of Subm, Delhi-Delhi
TDR : 32422262
Tender Notice
Corrigendum Details
BOQ
Expired
Delhi
Delhi
Corrigendum : Supply Installation Testing Commissioning Of Submesible Pump Sets With All Allied Eandm Equipment At More Sarai, Katra Pedan Bijli Road, Kucha Seth , Dariba Kalan And Deewan Hall In Chandni Chowk Area Under Ac-20 ( Ae-Ii ) - 1 Supply of subm
Name of Work:SITC of submesible pump sets with all allied E&M equipment at More Sarai, Katra Pedan Bijli Road, Kucha Seth , Dariba Kalan and Deewan Hall in Chandni Chowk area under AC-20 (AE-II)
Sl. No.
Item Description
1
Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor.Motor Detail:Motor Power: 5 HP, Voltage:415 Volt, F.L Current 9.5 amps ,Speed 2900 RPM, suitable for operation on 3 Ph., 50 Hz AC power supply.Pump Details: Pump Stage:21Pump Operating Range: Head:122-70 mtrs ,Discharge :100-200 lpm, Outlet size: 40-50mm. Make: BS/KBL/ DJB Approved
2
Supply of Automatic outdoor type Electrical hut/ cubical type LT distribution panel board for automation operation of T/well upto 10 HP Submersible pump set having sheet enclosure made out of 16 SWG sheet and 40 x 40 x5 mm angle iron and size 1000x1000x 450mm with 02 feet long legs stand, power coated free standing floor mounted type, dust & vermin proof, out ward opening lockable doors having hidden hinge and bolted back cover both using non-deteriorating neoprene rubber gasket. The panel should have interlocking arrangement with necessary accessories such as bakelite sheetfor installation of electric energy meter and duly painted with red oxide paint there after light grey colour with powder coated paint and sign of danger on panel front for up to 10 HP motor/pumpswith DOL starting system. The various components and sub equipment of the panel will be shaped out of high conductivity electrolyte aluminum conductor and shall be liberal size. The control wiring of the panel will be done with PVC flexible wire of 1.5 mm2 each wire will be terminating a ferule crimped to the wire having the following components. The work includes installation of below mentioned accessories/insertions/material in above panel complete in all respect & having Make: L&T/C&S/Schneider/DJB approveda) MCCB 4 Pole having Current Rating 63A & breaking capacity 10 kA with spreader link, suitable for motor protection.01 No.b) 3 Pole Power contactor 40 A., 240 VAC.02 Nos.c)3 Pole Power contactor 32 A., 240 VAC 01 No.d) Digital Ampere meter Class 1.0 01 No.e) Digital Voltmeter meter class 1.0 01 No.f)LED Indicating lamp set for RYB phase 240 VAC 05Nos.g) Time switch digitaltype 01 No.h) Over load relay thermal type 14-23 A 01 No.i) Auto manual switch 2 position selector switch center offwith NO + NC block01 No.j) 3Pole MCB of 63 Amp. Capacity01 No.k) Power capacitor of 05 kVAr cylindrical Heavy duty. 440 volt 50Hz AC supply. 01 No.l) 4 Pole RCCB of 40 Amp.300MA Capacity 01 No.m) Single Pole MCB (6-32 )Amp.04 Nos.n) Push button start / stop with elements flush type 6A. 02 Noso) Volt meter selector switch.01 No.p) Phase sequence relay 415VAC. 01 No.q) ADD on block contact 1 NO + 1 NC 01 No.r) Electronic Motor Protection Relay (8-22)A with following protections and functions: Overload, Locked Rotor, Single Phasing ,Current Unbalance ,Phase Sequence Reversal ,Under Current ,Inbuilt CT\"s,Trip indication ,Test facility.
3
S/o 2.5sq.mm flat 3 Core PVC insulated & PVC Sheathed submersible cable suitable for 1100 Volts Copper cable (100 mtr per roll) Make :Havells / Gloster /Grandley/ DJB Approved .
4
S/o G.I. pipe 40 mm dia,6mtr long Medium class both ends threaded for socket .Make:Jindal /Tata/ DJB Approved .
S/oM.S. clamp of 600mm long 12mm thick complete with nut and bolts and washers for holding the 40mm dia pipe including bending and shaping etc. As required.
10
S/o Bore Cover plate made out of 6 mm thick MS Plate having OD 150/200 mm and ID(40-50) mm in two pieces with bolting arrangement as per site requirement.
11
Installation of Submersible pumpset with pipe and other accessories, Connection of cable, Installation of electric panel, Grouting of electric panel digging and fixing the same with the help of CC and lying of GI pipe from bore to panel executing minor Civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E&M equipments on No load and full load conditions as per standard and full satisfaction of Engineer-in-charge.This is a turnkey joband it further includesany left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
