Supply Of Plasticware And Labware - 13 Items , Supply Of Plasticware And Labware As Per Following Specifications ( 13 Items ) :- Wash Bottle Made Of Translucent And Low Density Polyethylene ( Ldpe ) . The Bottles Should Have Built-In Delivery Tube Which Makes It A One-Piece Wash Bottle. Ldpe Confirming To Us Fda 21 Cfr.500 Ml Capacity , Wide Mouth Autoclavable Wash Bottle With A Fine Tip Aperture For Precision Liquid Dispensing, Made Of Low Density Polyethylene ( Ldpe ) , 500 Ml Capacity , Dropping Bottles Made Of Ldpe ( Low Density Polyethylene ) With Excellent Chemical Resistance. These Dropping Bottles Can Accurately And Reliably Dispense A Variety Of Reagents. The Dropping Bottles Will Repeatedly Produce A Measured Drop, But Only When Squeezed. 60 Ml Capacity , Amber Volumetric Flask Class A, 100 Ml Capacity, Suitable For Storage Of Light Sensitive Materials. It Is A Tinted Volumetric Flask Of Polymethylpentene ( Pmp ) Offer Superior Opacity To Ultraviolet Light, As Well As Much Of The Visible Spectrum, Compared With Amber Glass. The Flask Should Be Light Weight And Offer Superior Break Resistance. The Pmp ( Tpx ) Should Confim To Us Fda 21 Cfr Autoclavable , Volumetric Flask Class A, 100 Ml Capacity.The Flask Made Of Polymethylpentene ( Pmp ) Material. The 100 Ml Volumetric Flask Should Have A Single Calibration Ring Mark That Defines The Calibrated Volume Exactly Which Is Used For Accurate Measurement In The Laboratory Applications.They Have Tolerance As Per Din En Iso 1042 Class A, With Imprinted Lot Number & Certificate. They Have Standard Ns Pp Stoppers. Thepmp ( *Tpx ) / Pp Material Confirming To Us Fda 21. , Volumetric Flask Class A, 50 Ml Capacity. The Flask Made Of Polymethylpentene ( Pmp ) Material. The 100 Ml Volumetric Flask Should Have A Single Calibration Ring Mark That Defines The Calibrated Volume Exactly Which Is Used For Accurate Measurement In The Laboratory Applications.They Have Tolerance As Per Din En Iso 1042 Class A, With Imprinted Lot Number & Certificate. They Have Standard Ns Pp Stoppers. Thepmp ( *Tpx ) / Pp Material Confirming To Us Fda 21. , Volumetric Flask Class A, 250 Ml Capacity. The Flask Made Of Polymethylpentene ( Pmp ) Material. The 100 Ml Volumetric Flask Should Have A Single Calibration Ring Mark That Defines The Calibrated Volume Exactly Which Is Used For Accurate Measurement In The Laboratory Applications.They Have Tolerance As Per Din En Iso 1042 Class A, With Imprinted Lot Number & Certificate. They Have Standard Ns Pp Stoppers. Thepmp ( *Tpx ) / Pp Material Confirming To Us Fda 21. , Beaker Looks Like Glass With Durability Of Plastic, Molded In Polymethylpentene ( Tpx ) Conforming To Us Fda 21 Cfrautoclavable, 50 Ml Capacity , Beaker Looks Like Glass With Durability Of Plastic, Molded In Polymethylpentene ( Tpx ) Conforming To Us Fda 21 Cfrautoclavable, 500 Ml Capacity , Natural Rubber Pipette Bulb Capacity Up To 100Ml, Suitable For Use With Liquid Handling Pipettes, Material: Natural Rubber. , Pipettor Stand, A Self-Standing Holder Accommodates Most Major Brands Of Pipettes, Material: Pmma , Specimen Tube With Flat Bottom, Material: Polystyrene ( Ps ) / Polyethylene ( Pe ) , Dimensions: 25 X 75 Mm, , Petri Dish Moulded In Polypropylene ( Pp ) Material, Clear And Unbreakable. Pp Confirming To Us Fda 21 Cfr. Autoclavable, 75 Mm Diameter Note: While Submitting The Offer, The Make, Catalogue Number Should Invariably Be Mentioned Against Each Item. The Offers Without These Parameters Will Not Be Considered.
