Mechanical Works At Li / Dewatering Scheme Magraypora 1St Of Misd Pattan- 1 Providing And Fitting Of Tc-15 Coupling By Way Of:• Dismantling Of Old Damaged Coupling At Site By Engaging Skilled Labour, Tools And Tackles, Shifting It To Workshop For B, baramulla-Jammu And Kashmir

Mechanical Works At Li / Dewatering Scheme Magraypora 1St Of Misd Pattan- 1 Providing And Fitting Of Tc-15 Coupling By Way Of:• Dismantling Of Old Damaged Coupling At Site By Engaging Skilled Labour, Tools And Tackles, Shifting It To Workshop For Boring Of New Coupling As Per Sample.• Drilling / Boring Of New Coupling As Per Size By Turning It On Lathe By Engaging A Skilled Lathe Operator.• Cutting Of Groove For Cotter Pin As Per Sample.• Fabrication Of Cotter Pin As Per Sample.• Shifting Of New Coupling To Site, Installing The Same By P / F Of Rubber Tyre, Coupling Bolts, Nuts And Washers.Job Includes Proper Alignment Of Coupling By An Expert So To Avoid Damage To Pumping Machinery Due To Misalignment Besides Testing Of Unit On Full Load At Site. 2 Repairs To Ms Trash Guardby Way Of Replacement Of Its Damaged Iron Bars With New Ones By Means Of Welding Fabrication Etc. The Mesh Shall Be Fabricated Out Of Issq 12 Square Bars. These Square Bars, Welded 25Mm Apart, Shall Be Placed In The Frame In Vertical Direction.The Frame Of The Trash Guard, Shall Be Provided With Additional Reinforcementfabricated Out Of Isa 50X50x5. The Trash Guard Shall Be Supported By Angle Iron Bracingsfabricated Out Of Isa 50X50x5welded In The Horizontal Direction The Job Shall Be Complete In All Respects, Including Two Coats Of Red-Oxide Of Reputed Make On All The Members, Transportation And Handling At Site.Approx. Weight Of Ms Iron Used = 50 Kg. 3 Modification To The Priming Pump Piping System By Way Of:A. Providing And Fitting Of 50Mm G.I Pipe - 12Rftb. Providing And Fitting Of 50Mm Threaded C.I Gate Valve - 01Noc. Providing And Fitting Of 50Mm Dia Nipple ( 3 Length ) - 02No.D. Arresting The Leakage At Few Points In The Delivery Piping System By Way Of Welding Using Superior Class Welding Electrodes.The Job Includes All The Tools And Tackles Required For Completion Of Job. 4 Repairs To 12 Inch Dia M.S Foot Valveby Way Of;A. Dismantling Of Suction Pipe To Retrieve Foot Valve By Engaging Skilled Manpower.B. Dismantling Of Damaged Foot Valve At Site Shifting To Workshop For Its Repairing By Loading / Unloading On Private Vehicle.C. Welding To The Cracked Hinges And Its Rebuilding By Way Of Bushing And Hinge Rod As Per Requirement, Finishing To The Valve Seat And Valve Plate. P / F Of Rubber Washer To Weight Plate.D.P / F Of Rubber Washer Retaining Platee. P / F Of Assorted Size Nuts And Bolt As Per Requirement.F.Job Includes Re-Assembling Of Foot Valve After Repairs, Shifting Back To Site And Installingon Suction Side By Engaging Skilled Labourbesides Testing The Foot Valve. 5 Providing And Fitting Of Assorted Size Nuts And Bolts. 6 Providing And Fitting Of Rubber Sheet ( 3.5 X 3.5 ) Of 6Mm Thicknessfor Replacement Of Worn Out Ones For Foot Valves At Various Lift Irrigation Cum Dewateringschemes. 7 Preparing Of Surface Of Pumping Unit, Pipes Using Blue Lamp And Metallic Sand Paper And Then Applying Of Two Coats Of Red Oxide Anti Corrosive Primer Followed By Two Coats Of Enamel Paint Of Reputed Make.Shade Of Paintto Be Specified By The Site Engineer. 8 Providing And Fitting Of Polmative Gland Packing Of 12Mm Size At Various Lift Irrigation Cum Dewatering Schemes

INR 50 /-

INR 646.0 /-

Refer document